(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
HYB Series Round Type Hygienic Design Cylinder (HYDB40R-100-H7BAL)
A water-resistant air cylinder configured for easy cleaning.
[Features]
· To keep the product flat, grooves for auto switches and holes for cushion needles, etc. have been eliminated.
· Cylinder with improved water resistance and 5 times longer lifespan (compared to manufacturer's current models).
· With auto switch (HYDB).
(i)Caution
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis. - Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
- CAD data is not supported for some model numbers.
Part Number
Configured Part Number is shown.
HYDB40R-100-H7BAL
Model Number Notation
Model Number Notation
HYB Series Round Type Hygienic Design Cylinder Features
HYB Series Round Type Hygienic Design Cylinder external appearance
JIS symbol of HYB Series Round Type Hygienic Design Cylinder (rubber bumper)
Specifications
| Tube Inner Diameter (mm) | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 |
|---|---|---|---|---|---|---|---|---|
| Action | Double acting, single rod | |||||||
| Fluid | Air | |||||||
| Minimum operating pressure | 0.2 MPa | 0.15 MPa | 0.07 MPa | |||||
| Maximum operating pressure | 1.0 MPa | |||||||
| Proof Pressure | 1.5 MPa | |||||||
| Ambient and Working Fluid Temperature | Without switch: 0°C to 70°C | |||||||
| With switch: 0°C to 60°C | ||||||||
| Lubrication | Not required | |||||||
| Piston Speed | 50 to 500 mm/s (with pressure at 1.0 MPa)* | |||||||
| Cushioning | Rubber cushion | |||||||
| Stroke length tolerance | (0 to +1.4) mm | |||||||
| Piston rod material | SUS304 hard chrome plating | |||||||
*Use the product below the allowable kinetic energy. See p. 1,086 of the manufacturer's catalog for the allowable kinetic energy.
Standard Stroke Table
| Tube Inner Diameter (mm) | Standard Stroke (mm) |
|---|---|
| 20 | 25, 50, 75, 100, 125, 150, 200 |
| 25 to 100 | 25, 50, 75, 100, 125, 150, 200, 250, 300 |
- *Manufacture of intermediate strokes at 1‑mm intervals is possible (spacers are not used).
Drawing
HY□B20 to 100
Drawing: HY□B20 to 100
(Units: mm)
| Tube inner diameter | A | B | C | D | E1 | E2 | F1 | F2 | GA | GB | H | I | J | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Port: M5, Rc, NPT | Port: G | |||||||||||||
| 20 | M4 × 0.7 depth 8 | 14 | 18.5 | 8 | 18 | 12 | 3 | 2 | 13 | 10 | 10 | 26 | M4 × 0.7 depth 7 | |
| 25 | M5 × 0.8 depth 10 | 16.5 | 18.5 | 10 | 18 | 14 | 3 | 2 | 13 | 10 | 10 | 31 | M5 × 0.8 depth 7.5 | |
| 32 | M6 × 1.0 depth 12 | 20 | 20 | 12 | 20 | 18 | 3 | 2 | 12 | 11 | 10 | 10 | 38 | M5 × 0.8 depth 8 |
| 40 | M8 × 1.25 depth 13 | 26 | 26 | 16 | 26 | 25 | 3 | 2 | 13 | 10 | 10 | 15 | 47 | M6 × 1.0 depth 12 |
| 50 | M10 × 1.5 depth 15 | 32 | 32 | 20 | 32 | 30 | 3 | 2 | 14 | 14 | 12 | 15 | 58 | M8 × 1.25 depth 16 |
| 63 | M10 × 1.5 depth 15 | 38 | 38 | 20 | 32 | 32 | 3 | 2 | 14 | 12 | 12 | 15 | 72 | M10 × 1.5 depth 16 |
| 80 | M16 × 2.0 depth 21 | 50 | 50 | 25 | 37 | 40 | 3 | 3 | 20 | 17 | 16 | 20 | 89 | M10 × 1.5 depth 22 |
| 100 | M20 × 2.5 depth 27 | 60 | 60 | 30 | 42 | 50 | 3 | 3 | 20 | 17 | 16 | 20 | 110 | M12 × 1.75 depth 22 |
(Units: mm)
| Tube inner diameter | K | KA | NA | NB | P | R | S | ZZ | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Nil | TF | TN | ||||||||
| 20 | 5 | 6 | 30 | 24 | M5 × 0.8 | - | - | 33 | 69 | 81 |
| 25 | 5 | 8 | 30 | 29 | M5 × 0.8 | - | - | 33 | 69 | 81 |
| 32 | 6 | 10 | 35.5 | 35.5 | Rc 1/8 | G1/8 | NPT 1/8 | - | 71 | 83 |
| 40 | 6.5 | 13 | 44 | 44 | Rc 1/8 | G1/8 | NPT 1/8 | - | 78 | 95 |
| 50 | 8 | 16 | 55 | 55 | Rc1/4 | G1/4 | NPT1/4 | - | 90 | 107 |
| 63 | 8 | 16 | 69 | 69 | Rc1/4 | G1/4 | NPT1/4 | - | 90 | 107 |
| 80 | 9.5 | 22 | 80 | 80 | Rc3/8 | G3/8 | NPT 3/8 | - | 108 | 131 |
| 100 | 11.5 | 27 | 100 | 100 | Rc1/2 | G1/2 | NPT1/2 | - | 108 | 131 |
- *Refer to p. 1,068 of the manufacturer's catalog for other models' dimensions, specifications, etc.
| Part Number |
|---|
| HYDB40R-100-H7BAL |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Operating Pressure (MPa) | Specifications | Port thread type | Auto Switches | Lead Wire | The number of the switches | Sealing materials | Grease |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 40 | 100 | 0.15 to 1.0 | Built-in magnet | Rc | H7BA | 3 | 2 | NBR | Standard grease (for non-food) |
Loading...
Basic Information
| Cylinder Operation Method | Double Acting | Rod Operation Method | Single Rods | Main Body Shape | Standard |
|---|---|---|---|---|---|
| Environment, Applications | Standard | Cushion | Rubber cushion | Specification of cylinder | Air cylinder with improved water resistance |
Please check the type/dimensions/specifications of the part HYDB40R-100-H7BAL in the HYB Series Round Type Hygienic Design Cylinder series.
Specification/Dimensions
-
type
- HYB
- HYDB
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
-
Operating Pressure(MPa)
-
Specifications
- Built-in magnet
- Without magnet
-
Port thread type
- G
- M Screw
- NPT
- Rc
-
Auto Switches
-
Lead Wire
- 3
- 5
-
The number of the switches
-
Sealing materials
- External FKM
- NBR
-
Grease
- Food compatible grease
- Standard grease (for non-food)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 21 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| HYB100R-100F |
| HYB100R-150 |
| HYB100R-150F |
| HYDB40R-100F |
| HYDB40R-100F-H7BAL |
| HYDB40R-100F-H7BALS |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Operating Pressure (MPa) | Specifications | Port thread type | Auto Switches | Lead Wire | The number of the switches | Sealing materials | Grease |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 100 | 100 | 0.07 to 1.0 | Without magnet | Rc | - | - | - | NBR | Food compatible grease | ||
- | 1 Piece(s) | Quote | 100 | 150 | 0.07 to 1.0 | Without magnet | Rc | - | - | - | NBR | Standard grease (for non-food) | ||
- | 1 Piece(s) | Quote | 100 | 150 | 0.07 to 1.0 | Without magnet | Rc | - | - | - | NBR | Food compatible grease | ||
MYR 1,352.55 | 1 Piece(s) | 21 Day(s) | 40 | 100 | 0.15 to 1.0 | Built-in magnet | Rc | None | - | - | NBR | Food compatible grease | ||
- | 1 Piece(s) | Quote | 40 | 100 | 0.15 to 1.0 | Built-in magnet | Rc | H7BA | 3 | 2 | NBR | Food compatible grease | ||
MYR 1,745.88 | 1 Piece(s) | 21 Day(s) | 40 | 100 | 0.15 to 1.0 | Built-in magnet | Rc | H7BA | 3 | 1 | NBR | Food compatible grease |
Additional Products in this Category
- General type super micro cylinder SCM series
- Pneumatic Cylinder 10A-6 Series
- Drive equipment standard cylinder twin-ported cylinder series
- Air Cylinder, Double Acting CJ1 Series
- Smooth Cylinder CA2Y Series
- Air Cylinder, Standard Type: Double Acting, Single Rod CJ2 Series
- Air Cylinder, Standard Type, Double Acting, Single Rod, Rechargeable Battery Compatible, 25A-CG1 Series
- Non-Rotating Rod Type Cylinder With End Lock CBM2 Series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy