(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that some of the items may take longer lead time to ship due to Japan New Year holidays (29-Dec-2024 to 5-Jan-2025). Early order placement is recommended. We apologize for the inconvenience caused and appreciate your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
180° Angular Air Gripper, Rack And Pinion Type, MHW2 Series (MHW2-40TFD1-M9PSAPC)
[Features]
· The unique seal construction allows for a shorter overall length and a constant grip strength when opening/closing.
· Can be equipped with auto switches in 4 locations.
· The key connection offers excellent impact-resistance.
· 2 types of finger option.
· Dustproof structure.
· Bearings equipped as standard.
(i)Caution
- Refer to the catalog for details on product specifications.
- Product images may be representative. Refer to the manufacturer's catalog for details.
Part Number
Configured Part Number is shown.
MHW2-40TFD1-M9PSAPC
180° Angular Type Air Chuck MHW2 Series Specifications
MHW2 Series JIS symbol (double acting, external gripping)
Finger option: flat finger type (standard) external appearance
Finger option: open/closing finger tap mounting type external appearance
| Applicable fluids | Air |
|---|---|
| Operating pressure | 0.15 to 0.7 MPa |
| Ambient temperature and working fluid temperature | -10 to +60°C |
| Repeat accuracy | ±0.2 mm |
| Maximum operating frequency | ø20 (diameter 20 mm), ø25 (diameter 25 mm): 60 c.p.m ø32 to 50 (diameter 32 to 50 mm): 30 c.p.m |
| Lubrication | Non-lube |
| Operating method | Double acting type |
| Auto switch (option)* | Solid state auto switch (3-wire, 2-wire) |
Note) See the manufacturer's catalog for detailed specifications of auto switches.
Model
| Model | Cylinder inner diameter (mm) | Gripping moment (effective value N·m)* | Opening/closing angle (both sides) | Weight (g)* | |
|---|---|---|---|---|---|
| Opening side | Closing side (finger touching) | ||||
| MHW2-20D | 20 | 0.30 | 180 ° | -5 ° | 300 |
| MHW2-20D1 | 320 | ||||
| MHW2-25D | 25 | 0.73 | -6 ° | 510 | |
| MHW2-25D1 | 540 | ||||
| MHW2-32D | 32 | 1.61 | -5 ° | 910 | |
| MHW2-32D1 | 950 | ||||
| MHW2-40D | 40 | 3.70 | -5 ° | 2,140 | |
| MHW2-40D1 | 2,270 | ||||
| MHW2-50D | 50 | 8.27 | -4 ° | 5,100 | |
| MHW2-50D1 | 5,350 | ||||
- *Value at pressure of 0.5 MPa.
- *Values do not include auto switch weight.
Outline dimensional drawing
MHW2-20D / flat finger type (standard) dimensional drawing
MHW2-20D / auto switch mounting groove dimensional drawing
(Unit: mm)
MHW2-20D1 / open/closing finger tap mounting type dimensional drawing
Structural drawing
MHW2 Series structure drawing
MHW2 series / fingers closed structure drawing
MHW2 series / fingers open structure drawing
Component parts
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Body | Aluminum Alloy | Hard anodizing |
| 2 | Piston | Aluminum Alloy | Hard anodizing |
| 3 | Pinion gear | Carbon steel | Heat treated |
| 4 | Seal cover | Brass | - |
| 5 | Dampers | Urethane rubber | - |
| 6 | Finger (A) | Carbon steel | Nitrided |
| 7 | Finger (B) | Carbon steel | Nitrided |
| 8 | Rubber magnet | Synthetic rubber | - |
| 9 | Rack | Carbon steel | Nitrided |
| 10 | Cap | ø20 (diameter 20 mm), 25 (diameter 25 mm): resin | - |
| ø32 to 50 (diameter 32 to 50 mm): aluminum alloy | Hard anodizing | ||
| 11 | Piston bolt | Stainless steel | - |
| 12 | Ball bearing | Carbon steel | Shield type |
| 13 | Key | Carbon steel | - |
| 14 | Hexagon socket head bolt | Carbon steel | Zinc chromate |
| 15 | Hex Socket Set Screw | Carbon steel | Zinc chromate |
| 16 | Type C retaining ring | Carbon steel | Phosphate coated |
| 17 | Type C retaining ring | Carbon steel | Phosphate coated |
Precautions
- *Note that when using the open/closing finger tap mounting type, there is a risk the bolt may interfere with the speed controller. (When using MHW)
- *See the manufacturer's catalog for the selection procedure, effective gripping force and allowable overhang amount.
- *Be sure to read the product-specific precautions in the manufacturer's catalog before use.
- *See the manufacturer's catalog for product information other than the above.
Precautions when mounting
| Part Number |
|---|
| MHW2-40TFD1-M9PSAPC |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Finger Opening Angle A1 (deg) | Finger Closing Angle A2 (deg) | Gripping Force (when 0.5Mpa at closing) (N) | Environment, Applications | Cylinder internal diameter (mm) | Finger position / Options | Auto switch | Number of switches | Lead wire length | Size | Made to order specifications | Connector type for gripper opening/closing | Port thread type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | - | -5 | 94.9 | Dust Resistant | 40 | Open/close direction tapped mounting | M9P | 2 pcs. | - | 1/8 | None | M8 3-pin | G |
Loading...
Basic Information
| Type | Main body | Gripping Methods | Pinch, Swing Type | Number of Fingers | 2 pcs. |
|---|---|---|---|---|---|
| Main Body Shape | Square Shape | Operation Method | Double Acting Type | Additional Functions | Speed control |
| Stroke Adjustment Mechanism | Not Provided |
Please check the type/dimensions/specifications of the part MHW2-40TFD1-M9PSAPC in the 180° Angular Air Gripper, Rack And Pinion Type, MHW2 Series series.
Specification/Dimensions
-
Lead wire length
- 0.5 m
- 1 m
- 3 m
- 5 m
- None
-
type
- MHW2-20□
- MHW2-25□
- MHW2-32□
- MHW2-40□
- MHW2-50□
-
Gripping Force (when 0.5Mpa at closing)(N)
-
Environment, Applications
- Standard
- Dust Resistant
-
Cylinder internal diameter(mm)
-
Finger position / Options
- Flat finger type (standard)
- Open/close direction tapped mounting
-
Auto switch
-
Number of switches
-
Size
- 1/4
- 1/8
- 5
-
Made to order specifications
- Heat resistance (100°C)
- Heat resistance specification (100°C)
- Fluorine grease
- Fluoroelastomer seal
- Grease for food processing machines
- Grease for food processing machines / fluorine grease
- No magnet
- None
-
Connector type for gripper opening/closing
- M8 3-pin
- M8 4-pin
- M12 4-pin
- None
-
Port thread type
- G
- M
- NPT
- Rc
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 21 Day(s) or Less
- 31 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| MHW2-20D-M9BA-X5 |
| MHW2-20D-M9BAL |
| MHW2-20D-M9BAL-X5 |
| MHW2-40TFD1-M9PWSDPC |
| MHW2-40TFD1-M9PWV |
| MHW2-40TND |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Finger Opening Angle A1 (deg) | Finger Closing Angle A2 (deg) | Gripping Force (when 0.5Mpa at closing) (N) | Environment, Applications | Cylinder internal diameter (mm) | Finger position / Options | Auto switch | Number of switches | Lead wire length | Size | Made to order specifications | Connector type for gripper opening/closing | Port thread type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 180 | -5 | 14.3 | Standard | 20 | Flat finger type (standard) | M9BA | 2 pcs. | 0.5 m | 5 | Fluoroelastomer seal | None | M | ||
- | 1 Piece(s) | Quote | 180 | -5 | 14.3 | Standard | 20 | Flat finger type (standard) | M9BA | 2 pcs. | 3 m | 5 | None | None | M | ||
- | 1 Piece(s) | Quote | 180 | -5 | 14.3 | Standard | 20 | Flat finger type (standard) | M9BA | 2 pcs. | 3 m | 5 | Fluoroelastomer seal | None | M | ||
- | 1 Piece(s) | Quote | 180 | -5 | 94.9 | Standard | 40 | Open/close direction tapped mounting | M9PW | 2 pcs. | 0.5 m | 1/8 | None | M12 4-pin | G | ||
- | 1 Piece(s) | Quote | 180 | -5 | 94.9 | Standard | 40 | Open/close direction tapped mounting | M9PWV | 2 pcs. | 0.5 m | 1/8 | None | None | G | ||
- | 1 Piece(s) | Quote | 180 | -5 | 94.9 | Standard | 40 | Flat finger type (standard) | Without auto switch (built-in magnet) | None | None | 1/8 | None | None | NPT |
Additional Products in this Category
- MEPAC Micro Type
- Gripper, Closed Chuck Shank Type (2-Screw Mounting Method)
- Bracket for MEPAC Unclamp Units
- Gripper, Thin Chuck CKA/CKB/CKD Series
- Air Gripper, Wedge Cam Operation, Slide Guide, 2-Finger Type, MHK2 Series
- Angular Type Air Gripper MHC2-6/MHCA2-6 Series
- Linear Slide Hand LSH Series
- Air Gripper (180° Opening/Closing Type) HFR Series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy