(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
IC Series Controller For Electro-Pneumatic Regulator (IC31-1AB)
A controller for electro-pneumatic regulators that converts digital signals to analog signals.
[Features]
· 10‑bit parallel input signal (maximum). Pressure can be set with 2^10 = 1,024 steps.
· 4-point preset output pressure. Available in the programming function with up to 20 steps.
· 4-point pressure switch function.
· Switch output is enabled by setting the upper and lower limits of pressure.
· Power voltage and output signals.
· Output power voltage and output signal to the electro-pneumatic regulator can be set with keys on the front panel.
[Applications]
· This product is mainly used in combination with the ITV0000 Series without a display function.
(i)Caution
- ■ SMC Air Cylinder Product Selection and Technical Information
The featured products page can be found here.
■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
Click here for a quotation or to make an order if you have a model number.
■ Products Planned For Online Release
Air cylinder-related product pages will be released on this site on an ad-hoc basis.
CQ2/MG types, etc., are already available. Click here to check.
*Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis. - See the catalog for specification details.
- Product images may be representative images. Refer to the catalog for details.
Part Number
Configured Part Number is shown.
IC31-1AB
IC Series Controller For Electro-Pneumatic Regulator Specifications
IC Series Controller For Electro-Pneumatic Regulator connection example
*Power is supplied only to the controller.
*There is no feedback control function.
| Model | IC1□ | IC3□ | IC5□ | IC9□ | |
|---|---|---|---|---|---|
| Pressure range | 0.1 MPa | 0.5 MPa | 0.9 MPa | -0.9 MPa | |
| Pressure-resistant | 500 kPa | 1.5 MPa | 500 kPa | ||
| Fluid | Air, noncorrosive gas | ||||
| External Dimensions | 48 × 48 × 100.5 | ||||
| Power supply | 12 to 24 V DC (15 W or more), ripple (p-p) 1% or less | ||||
| Input | (1) No. of inputs: up to 10-bit input from sequencer (parallel)*5 Input method: no-voltage contact or NPN open collector input Minimum pulse width: 50 msec (2) Input method: 4-point input with keys (interval time can be set by programming) | ||||
| Power supply output | 12 V DC (Max. 300 mA), accuracy 12 to 14.4 V DC*2 | ||||
| 24 V DC (Max. 300 mA), accuracy 22.0 to 26.8 V DC | |||||
| Command output | (1) 0 to 10 V DC (output resistance 6.5 kΩ or more, accuracy 0.5% F.S. or less) (2) 4 to 20 mA (output resistance 800 Ω or less, accuracy 0.5% F.S. or less) | ||||
| Switch output | Output: 4 points Output type: NPN, PNP open collector output Withstand voltage: Max. 30 V Current: Max. 100 mA Internal voltage drop: 1 V or less Switching between N.O. and N.C. modes is possible | ||||
| Switch response | 5 to 640 ms | ||||
| Display | Power indication: 3 1/2-digit LED indicator (red) | ||||
| Output power supply voltage and current signal indication: 1-digit LED indicator (red) | |||||
| LED lights for RUN, CH, SW (red and green) | |||||
| Display accuracy*1 | ±0.5% F.S. ±1 dig (at 25°C) | ||||
| Display sampling rate | Approx. 4 times/s | ||||
| Temperature characteristics | ±0.12% F.S. / °C | ||||
| Error indication | Displayed on pressure indication LED display | ||||
| Resistance | Operating temperature range | 0 to 50°C | |||
| Storage temperature range | -20 to +60°C | ||||
| Operating humidity range | 0 to 85%R.H. | ||||
| Vibration resistance | 10 to 55Hz, amplitude 1.5 mm X, Y, Z directions for 2 hrs. each | ||||
| Impact resistance | 100 m/s2(approx. 10 G) X, Y, Z directions | ||||
| Water resistance | Only display unit with cover is equivalent to IP65. Equivalent to IP40 without cover. | ||||
| Sensor type | Built-in sensor type, external sensor type*3) | ||||
| Set value retention | 10 years when deenergized (EEPROM) | ||||
| Connection port size | M5 female (built-in sensor type) | ||||
| Material | Enclosure: POM Display: PC Gasket: NBR Panel mount adapter: POM Display protective cover: PC | ||||
| Weight | Approx. 330 g (built-in sensor type) Approx. 345 g (external sensor type) | ||||
*1: The display accuracy is the accuracy of the LED display when the sensor port of the built-in sensor type is pressurized.
*2: The external sensor type has the same output power supply voltage specifications.
*3: The sensor for the external sensor type is not attached and must be ordered separately.
Any pressure sensor that transmits analog output signals can be connected.
Recommended sensor: PSE530 Series (see manufacturer's catalog)
*4: Button operation is required when turning the power on again. However, the made-to-order specification (-X2) automatically returns to the pre-shutdown state when the power is switched on again.
*5: For the ITV1000 to 3000 Series, 10-bit input (parallel) through a sequencer is available as -X93, -X157 (CE compliant).
Descriptions
IC Series part descriptions
| Number | Description |
|---|---|
| (1) | OUT display Displays output specification to electro-pneumatic regulator. |
| (2) | RUN display Displays control status. |
| (3) | CH (channel) display (for 4-point input) Illuminates pressure selection channel among CH1 to CH4 with output ON. |
| (4) | SW (switch) output display Displays output type and output status of SW1 to 4. |
| (5) | UP button Used to change mode and set value. |
| (6) | SET/RUN button Used to confirm mode and set value, or to change to control ON state. |
| (7) | D-IN/READ button Used to select mode and turn ON/OFF power supply to electro-pneumatic regulator. |
| (8) | P-ON/STOP button Used to turn ON/OFF main power supply, escape from mode, or change to standby state. |
| (9) | DOWN button Used to change mode and set value. |
| (10) | Pressure display Displays measured value, settings, and error code. |
IC□□-0□□ (built-in sensor type) part descriptions
IC□□-1□□ (external sensor type) part descriptions
| Number | Description | Note |
|---|---|---|
| (1) | Power supply, 10-bit input cable | 13 wire, ø6.8 (outer diameter 6.8 mm), length 1 m |
| (2) | Cable for 4-point switch output | 5 wire, ø6 (outer diameter 6 mm), length 1 m |
| (3) | Pneumatic regulator connection cable | 3 wire, ø3.4 (outer diameter 3.4 mm), length 1 m |
| (4) | Cable for external sensor |
*1: Keep the bending radius of the cable to 50 mm or more.
*2: Since electro-pneumatic regulator cable (3) and cable for external sensor (4) are identical in shape, take precautions against erroneous connection.
Internal Circuit and Connection
IC□0-□□□ (NPN open collector output type)
*1: If the power supply for loads and main power supply are provided by a common source, the power supply (GND) can be used for SW-DC (GND).
*2: Connection to the pressure sensor is required only when using the external sensor type.
IC□1-□□□ (PNP open collector output type)
*1: Connection to the pressure sensor is required only when using the external sensor type.
*For the setting procedure and detailed cable connection specifications, see the instruction manual.
Dimensions
(Unit: mm)
Built-in sensor type dimensional drawing
(Unit: mm)
External sensor type dimensional drawing
Option
(Unit: mm)
Panel-mount adapter dimensional drawing
(Unit: mm)
Protective cover dimensional drawing
Precautions
- *Do not drop, bump, or apply excessive impacts (980 m/s2) while handling. Although the body of the sensor may not be damaged, the inside of the sensor could be damaged and lead to a malfunction.
- *The tensile strength of the cord is 20 N. Applying a greater pulling force on it can cause a malfunction. When handling, hold the body of the sensor—do not dangle it from the cord.
- *Do not exceed the screw-in torque of 3.5 N·m when installing piping. Exceeding this value may cause malfunctioning of the sensor.
- *The minimum bending radius of the cable is 50 mm or more.
- *Do not use pressure sensors with corrosive and/or inflammable gases or liquids.
- *The images for this product are representative images. *The product shown may differ from the actual product.
- *See the manufacturer's catalog for information other than the above.
| Part Number |
|---|
| IC31-1AB |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Pressure Range | Output Specification | Sensor | Mounting specification | Protective cover |
|---|---|---|---|---|---|---|---|---|---|
MYR 6,492.20 | 1 Piece(s) | 21 Day(s) | 0.5 MPa | PNP open collector output | External sensor type | Panel mount | With protective cover |
Loading...
Basic Information
| Regulator, Pressure Boosting Valve | Controller |
|---|
Please check the type/dimensions/specifications of the part IC31-1AB in the IC Series Controller For Electro-Pneumatic Regulator series.
Specification/Dimensions
-
type
- IC1□
- IC3□
- IC5□
- IC9□
-
Pressure Range
- -100 kPa
- 0.1 MPa
- 0.5 MPa
- 0.9 MPa
-
Output Specification
- NPN open collector output
- PNP open collector output
-
Sensor
- Built-in sensor type
- External sensor type
-
Mounting specification
- None
- Panel mount
-
Protective cover
- None
- With protective cover
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 21 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| IC10-0B |
| IC10-1 |
| IC10-1A |
| IC50-0 |
| IC50-0A |
| IC50-0AB |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Pressure Range | Output Specification | Sensor | Mounting specification | Protective cover |
|---|---|---|---|---|---|---|---|---|---|
MYR 6,944.67 | 1 Piece(s) | 21 Day(s) | 0.1 MPa | NPN open collector output | Built-in sensor type | None | With protective cover | ||
MYR 6,407.42 | 1 Piece(s) | 21 Day(s) | 0.1 MPa | NPN open collector output | External sensor type | None | None | ||
MYR 6,449.83 | 1 Piece(s) | 21 Day(s) | 0.1 MPa | NPN open collector output | External sensor type | Panel mount | None | ||
MYR 6,902.28 | 1 Piece(s) | 21 Day(s) | 0.9 MPa | NPN open collector output | Built-in sensor type | None | None | ||
MYR 6,944.67 | 1 Piece(s) | 21 Day(s) | 0.9 MPa | NPN open collector output | Built-in sensor type | Panel mount | None | ||
MYR 6,986.62 | 1 Piece(s) | 21 Day(s) | 0.9 MPa | NPN open collector output | Built-in sensor type | Panel mount | With protective cover |
Additional Products in this Category
- Small Size Precision RegulatorRegulator
- Compact Piston Regulator RA800 Series
- Auxiliary Air Pressure Mechanism Air Regulator
- Pressure Control Valve AP100
- ARM11B Series Individual Supply Type Manifold Regulator
- SRP Series Precision Clean Regulator
- ARM1000/2000 Series Manifold Regulator
- ITVX2000 Series 5.0 MPa High-Pressure Electro-Pneumatic Regulator
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy