(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that some of the items may take longer lead time to ship due to Japan New Year holidays (29-Dec-2024 to 5-Jan-2025). Early order placement is recommended. We apologize for the inconvenience caused and appreciate your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
ITVH2000 Series 3.0 MPa High-Pressure Electro-Pneumatic Regulator (ITVH2020-342CL)
High-pressure electro-pneumatic regulator that supports a maximum supply pressure of 3.0 MPa.
[Features]
· RoHS compliant.
· Set pressure range: 0.2 to 2.0 MPa.
· Stability: ±1% F.S. or less.
· Power consumption: 3W or less.
· Maximum flow rate: 3,000 L/min (ANR).
· Fluid-contact parts: fluorine grease.
· Digital pressure display.
· Linearity: ±1% F.S. or less / Hysteresis: 1% F.S. or less / Repeatability: ±1% F.S. or less.
(i)Caution
- ■ SMC Air Cylinder Product Selection and Technical Information
The featured products page can be found here.
■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
Click here for a quotation or to make an order if you have a model number.
■ Products Planned For Online Release
Air cylinder-related product pages will be released on this site on an ad-hoc basis.
CQ2/MG types, etc., are already available. Click here to check.
*Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis. - See the catalog for specification details.
- Product images may be representative images. Refer to the catalog for details.
Part Number
Configured Part Number is shown.
ITVH2020-342CL
- Download
Product Details - CAD Data unavailable
ITVH2000 Series 3.0 MPa High-Pressure Electro-Pneumatic Regulator Specifications
Straight type external appearance
Right-angle type external appearance
Flat bracket (option) external appearance
L-bracket (option) external appearance
ITVH2000 Series JIS symbol
Input/output correspondence chart
| Model | ITVH2000 | |
|---|---|---|
| Minimum supply pressure | Whichever is higher: 0.5 MPa or the set pressure + 0.2 MPa | |
| Maximum supply pressure | 3.0 MPa | |
| Set Pressure Range*1 | 0.2 to 2.0 MPa | |
| Power Supply | Voltage | Voltage 24 V DC ±10% |
| Current Consumption | Current consumption 0.12 A or less | |
| Input Signal | Current type*2 | 4 to 20 mA DC, 0 to 20 mA DC (sink type) |
| Voltage type | 0 to 5 V DC, 0 to 10 V DC | |
| Preset input type | 4 points (negative common) | |
| Input Impedance | Current type | 500 Ω or less |
| Voltage type | Voltage type 6.0 to 6.5 kΩ (at 25°C) | |
| Preset input type | Approx. 4.7 k Ω | |
| Output Signal *3 (monitor output) | Analog Output | 1 to 5 V DC Output impedance 1 kΩ or more Output accuracy: within ±6% (F.S.) |
| 4 to 20 mA (sink type) Output impedance 250 Ω or less Output accuracy: within ±6% (F.S.) | ||
| Switch output | NPN open collector output: max. 30 V, 80 mA Hysteresis ±3% F.S. Self-diagnosis ±5% F.S. or less | |
| PNP open collector output: max. 80 mA Hysteresis ±3% F.S. Self-diagnosis ±5% F.S. or less | ||
| Linearity | ±1% F.S. or less | |
| Hysteresis | ±1% F.S. or less | |
| Repeatability | ±1% F.S. or less | |
| Sensitivity | ±1% F.S. or less | |
| Temperature characteristics | ±0.12% F.S. or less / °C | |
| Output pressure display | Accuracy | ±2% F.S. or less ±1 digit |
| Minimum unit*4 | MPa: 0.01, kgf/cm2: 0.1, bar: 0.1, psi: 1 | |
| Ambient and fluid temperature | 0 to 50°C (no condensation) | |
| Weight | Approx. 630 g (without options) | |
*1: Refer to the figure for the relationship between the set pressure and input signal.
*2: 2-wire type 4 to 20 mA is not available. Power supply voltage 24 V DC is required.
*3: Select one of either analog output or switch output. If switch output is selected, select either NPN output or PNP output. When measuring analog output from 1 to 5 V DC with a load impedance of less than 100 kΩ, an analog output accuracy of within ±6% (full span) may not be available.
*4: Adjustment of numerical values such as the zero/span adjustment is set based on the minimum unit for the output pressure display. The unit cannot be changed.
*5: The above characteristics are confined to the static state. When air is consumed on the output side the pressure may fluctuate.
*6: This product does not conform to the High Pressure Gas Safety Law (Japan).
Working Principle
Working principle diagram
When the input signal rises, air supply solenoid valve (1) turns ON, and exhaust solenoid valve (2) turns OFF. Therefore, supply pressure regulated by built-in regulator (3) passes through air supply solenoid valve (1) and is applied to pilot chamber (4). The pressure in pilot chamber (4) increases and operates on the upper surface of diaphragm (5).
As a result, air supply valve (6) linked to diaphragm (5) opens, and a portion of the supply pressure becomes output pressure.
This output pressure feeds back to control circuit (8) via pressure sensor (7). Here, a correction operation functions until the output pressure is proportional to the input signal, making it possible to always obtain output pressure proportional to the input signal.
Dimensions
(Unit: mm)
ITVH2000 Series dimensional drawing
(Unit: mm)
Straight type / right-angle type dimensional drawing
*Do not turn the right-angle type cable connector. It does not rotate and is limited to only one entry direction.
(Unit: mm)
With flat bracket (option) dimensional drawing
Precautions
- *Screw piping together with the recommended proper torque while holding the side with the female threads. Looseness or faulty sealing will occur if tightening torque is insufficient, while thread damage will result if the torque is excessive. Furthermore, if the side with the female threads is not held while tightening, excessive force will be applied directly to piping brackets etc., causing damage or other problems.
- Port size M5: recommended proper torque 1.5 to 2 N·m
- Port size 1/4: recommended proper torque 8 to 12 N·m
- Port size 3/8: recommended proper torque 15 to 20 N·m
- *Do not allow twisting or bending moment to be applied other than the weight of the equipment. Provide separate support for external piping, as damage may otherwise occur.
- *Since excessive moment loads and the propagation of vibrations, etc. can easily result from inflexible piping made of materials such as steel, avoid these problems by using flexible tubing for intermediate connections.
- *Piping port indication: When connecting piping to a product, take care to avoid mistakes regarding the ports.
- Port 1: supply port
- Port 2: output port
- Port 3: exhaust port
- *Do not reduce the diameter of port 3 (the exhaust port), the EXH port of the solenoid valve, or the EXH port of the built-in regulator too much or block it. This could lead to an operation failure.
- *Be sure to read the safety precautions as well as the common precautions in the manufacturer's catalog before use.
- *The images for this product are representative images. *The product shown may differ from the actual product.
- *See the manufacturer's catalog for information other than the above.
| Part Number |
|---|
| ITVH2020-342CL |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Supply Side, Connection Type | Supply Side, Connection Dia. | Control Side, Connection Type | Control Side, Connection Dia. | Pressure Gauge | Input Signal / Communication Signal | Accessory | Pressure Unit | Monitor Output | Cable Connector Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | Rc | 1/4 | Rc | 1/4 | [Not Provided] No Pressure Gauge | [DC0-10V] Voltage Source Type DC 0~10V | L-bracket | MPa | - | Right-angle type 3 m |
Loading...
Basic Information
| Regulator, Pressure Boosting Valve | Regulator | Regulator Type | Electropneumatic | Applicable Fluid | Air |
|---|---|---|---|---|---|
| Shape | Standard | Operating Environment | Standard | Exhaust Mechanism | Presence |
| Adverse Current Function | No | Flow Direction | Left→Right | Power Supply Voltage | 24 V DC |
Please check the type/dimensions/specifications of the part ITVH2020-342CL in the ITVH2000 Series 3.0 MPa High-Pressure Electro-Pneumatic Regulator series.
Specification/Dimensions
-
Monitor Output
- Analog output 1 to 5 V DC
- Analog output 4 to 20 mA DC (sink type)
- None
- None (preset input only)
- Switch output / NPN output
- Switch output / PNP output
-
type
- ITVH2020-0□
- ITVH2020-1□
- ITVH2020-2□
- ITVH2020-3□
- ITVH2020-40□
-
Supply Side, Connection Type
- Rc
- G
- NPT
-
Supply Side, Connection Dia.
-
Control Side, Connection Type
- Rc
- G
- NPT
-
Control Side, Connection Dia.
-
Pressure Gauge
- Not Provided
- With Pressure Switch
- Not Provided
-
Input Signal / Communication Signal
- DC0-5V
- DC0-10V
- DC0-20mA
- DC4-20mA
- Others
- DC0-5V
-
Accessory
- Flat-type bracket
- L-bracket
- No bracket
-
Pressure Unit
- kgf/cm2
- kgf/cm2
- MPa
- bar
- psi
-
Cable Connector Type
- Right-angle type 3 m
- Straight type 3 m
- No cable connector
Days to Ship
-
- All
- 21 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| ITVH2020-012BL4 |
| ITVH2020-012BS |
| ITVH2020-012BS3 |
| ITVH2020-342CL3 |
| ITVH2020-342CN |
| ITVH2020-342CS3 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Supply Side, Connection Type | Supply Side, Connection Dia. | Control Side, Connection Type | Control Side, Connection Dia. | Pressure Gauge | Input Signal / Communication Signal | Accessory | Pressure Unit | Monitor Output | Cable Connector Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | Rc | 1/4 | Rc | 1/4 | [Not Provided] No Pressure Gauge | [DC4-20mA] DC4-20mA | Flat-type bracket | psi | Analog output 1 to 5 V DC | Right-angle type 3 m | ||
MYR 7,481.02 | 1 Piece(s) | 21 Day(s) | Rc | 1/4 | Rc | 1/4 | [Not Provided] No Pressure Gauge | [DC4-20mA] DC4-20mA | Flat-type bracket | MPa | Analog output 1 to 5 V DC | Straight type 3 m | ||
- | 1 Piece(s) | Quote | Rc | 1/4 | Rc | 1/4 | [Not Provided] No Pressure Gauge | [DC4-20mA] DC4-20mA | Flat-type bracket | bar | - | Straight type 3 m | ||
- | 1 Piece(s) | Quote | Rc | 1/4 | Rc | 1/4 | [Not Provided] No Pressure Gauge | [DC0-10V] Voltage Source Type DC 0~10V | L-bracket | bar | Analog output 4 to 20 mA DC (sink type) | Right-angle type 3 m | ||
- | 1 Piece(s) | Quote | Rc | 1/4 | Rc | 1/4 | [Not Provided] No Pressure Gauge | [DC0-10V] Voltage Source Type DC 0~10V | L-bracket | MPa | - | No cable connector | ||
- | 1 Piece(s) | Quote | Rc | 1/4 | Rc | 1/4 | [Not Provided] No Pressure Gauge | [DC0-10V] Voltage Source Type DC 0~10V | L-bracket | bar | - | Straight type 3 m |
Additional Products in this Category
- TAC air valve line regulator
- Relief Valve B6061 Series
- [NEW]Electric Pneumatic Regulator EVR series
- ARM11B Series Individual Supply Type Manifold Regulator
- Manifold Regulator, Individual Supply Type, ARM5B Series
- IC Series Controller For Electro-Pneumatic Regulator
- Regulator Clean/Low Dust Generation 10/20/21-AR-B Reverse Flow Function 10/20/21-AR□K-B
- Direct Acting Precision Regulator 10/20/21-ARP20 to 40·10/20/21-ARP20 to 40K
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy