(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

Tel: (60) 3 7890 6399

9am – 6pm (Mon – Fri), 9am – 1pm (Sat)

All Categories

Search by Application

inCAD Library

Brands

Please note that E-Invoice will be sent to our customers by email. For more information, please read News.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Linear drive, DFM Series (Part Numbers)

Click this image to zoom it.

FESTO

Part Number

Configured Part Number is shown.

Product Specifications
Part Numbers
Catalog

Linear drive, DFM Series

Features

Specifications

Piston diameter		6	10	12	16	20	25	32	40	50	63	80	100
Pneumatic connection		M3	M3	M5	M5	M5	G1/8	G1/8	G1/8	G1/4	G1/4	G3/8	G3/8
Design		Piston
		Piston rod
		Guide rods with yoke
Cushioning		Elastic cushioning rings/plates at both ends
Position sensing		Via proximity switch
Type of mounting		With through-hole
Type of mounting		With female thread
Mounting position		Any
Protection against torsion/guide		Guide rod with yoke/with plain-bearing or ball bearing guide
-	-	-	-	-	-	-	-	-	-	-	-	-	-
Operating and environmental conditions	-	-	-	-	-	-	-	-	-	-	-	-	-
-	-	-	-	-	-	-	-	-	-	-	-	-	-
Piston diameter		6	10	12	16	20	25	32	40	50	63	80	100
Operating pressure [bar]		2 to 8	1.5 to 8	2 to 10			1.5 to 10			1 to 10		0.5 to 10
Operating medium		Compressed air to ISO 85731:2010 [7:4:4]
Note on operating/ pilot medium		Lubricated operation possible (in which case lubricated operation will always be required)
Ambient temperature [℃]	DFM-...-GF	-10 to +60		-20 to +80
Ambient temperature [℃]	DFM-...-KF	-		-5 to +60
Corrosion resistance CRC		1

Speeds [m/s]

Cushioning P
Piston diameter	6	10	12	16	20	25	32	40	50	63	80	100
Maximum speed, advancing	1.3	1.7	0.8	0.8	0.8	0.8	0.8	0.8	0.6	0.6	0.4	0.4
Maximum speed, retracting	1.1	1.6	0.8	0.8	0.8	0.8	0.8	0.8	0.6	0.6	0.4	0.4

: 30; 60; 90

Part Number
DFM-40-100-P-A-GF
DFM-40-100-P-A-GF-F1A
DFM-40-100-P-A-KF
DFM-40-100-P-A-KF-F1A
DFM-40-125-P-A-GF
DFM-40-125-P-A-GF-F1A
DFM-40-125-P-A-KF
DFM-40-125-P-A-KF-F1A
DFM-40-160-P-A-GF
DFM-40-160-P-A-GF-F1A
DFM-40-160-P-A-KF
DFM-40-160-P-A-KF-F1A
DFM-40-200-P-A-GF
DFM-40-200-P-A-GF-F1A
DFM-40-200-P-A-KF
DFM-40-200-P-A-KF-F1A
DFM-50-25-P-A-GF
DFM-50-25-P-A-GF-F1A
DFM-50-25-P-A-KF
DFM-50-25-P-A-KF-F1A
DFM-50-50-P-A-GF
DFM-50-50-P-A-GF-F1A
DFM-50-50-P-A-KF
DFM-50-50-P-A-KF-F1A
DFM-50-80-P-A-GF
DFM-50-80-P-A-GF-F1A
DFM-50-80-P-A-KF
DFM-50-80-P-A-KF-F1A
DFM-50-100-P-A-GF
DFM-50-100-P-A-GF-F1A
DFM-50-100-P-A-KF
DFM-50-100-P-A-KF-F1A
DFM-50-125-P-A-GF
DFM-50-125-P-A-GF-F1A
DFM-50-125-P-A-KF
DFM-50-125-P-A-KF-F1A
DFM-50-160-P-A-GF
DFM-50-160-P-A-GF-F1A
DFM-50-160-P-A-KF
DFM-50-160-P-A-KF-F1A
DFM-50-200-P-A-GF
DFM-50-200-P-A-GF-F1A
DFM-50-200-P-A-KF
DFM-50-200-P-A-KF-F1A
DFM-63-25-P-A-GF
DFM-63-25-P-A-GF-F1A
DFM-63-25-P-A-KF
DFM-63-25-P-A-KF-F1A
DFM-63-50-P-A-GF
DFM-63-50-P-A-GF-F1A
DFM-63-50-P-A-KF
DFM-63-50-P-A-KF-F1A
DFM-63-80-P-A-GF
DFM-63-80-P-A-GF-F1A
DFM-63-80-P-A-KF
DFM-63-80-P-A-KF-F1A
DFM-63-100-P-A-GF
DFM-63-100-P-A-GF-F1A
DFM-63-100-P-A-KF
DFM-63-100-P-A-KF-F1A
DFM-63-125-P-A-GF
DFM-63-125-P-A-GF-F1A
DFM-63-125-P-A-KF
DFM-63-125-P-A-KF-F1A
DFM-63-160-P-A-GF
DFM-63-160-P-A-GF-F1A
DFM-63-160-P-A-KF
DFM-63-160-P-A-KF-F1A
DFM-63-200-P-A-GF
DFM-63-200-P-A-GF-F1A
DFM-63-200-P-A-KF
DFM-63-200-P-A-KF-F1A
DFM-80-25-P-A-GF
DFM-80-50-P-A-GF
DFM-80-80-P-A-GF
DFM-80-100-P-A-GF
DFM-80-125-P-A-GF
DFM-80-160-P-A-GF
DFM-80-200-P-A-GF
DFM-100-25-P-A-GF
DFM-100-50-P-A-GF
DFM-100-80-P-A-GF
DFM-100-100-P-A-GF
DFM-100-125-P-A-GF
DFM-100-160-P-A-GF
DFM-100-200-P-A-GF

Standard Unit Price	Minimum order quantity	Days to Ship	Stroke (mm)	Pneumatic connection	Piston diameter (mm)	Guide	Max. speed (m/s)	Impact energy in the end positions (J)	Max. force Fy (N)	Max. force Fz (N)	Max. torque Mx (Nm)	Max. torque My (Nm)	Max. torque Mz (Nm)	Theoretical force at 6 bar, retracting (N)	Theoretical force at 6 bar, advancing (N)	Moving mass (g)	Housing material	Cover material	Seals material	Min. Operating pressure (bar)	Max. Operating pressure (bar)	Min. Ambient temperature (°C)	Max. Ambient temperature (°C)	Distance of centre of gravity of payload to yoke plate xs (mm)	Max. static moment Mx (Nm)	Max. static moment My (Nm)	Max. permissible torque load Mx as a function of the stroke (Nm)	Max. force Fz static (N)	Max. force Fy static (N)	Center of gravity of the moving mass as a function of the stroke (mm)	Max. static moment Mz (Nm)	Max. payload as a function of the stroke at defined distance xs (N)	Operating medium	Corrosion resistance class (CRC)	Stroke (mm)	Manufacturer part #	Weight (g)
MYR 4,030.55	1 Piece(s)	Quote	100	G1/8	40	Sliding guide	0.8	0.7	-	-	-	-	-	686	754	1743	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1.5	10	-20	80	50	-	-	6.5	-	-	-	-	150	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170867	3595
MYR 4,430.36	1 Piece(s)	Quote	-	-	40	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	100	-	-
MYR 5,045.51	1 Piece(s)	Quote	100	G1/8	40	Recirculating ball bearing guide	0.8	0.7	1130	1130	49.74	28.83	28.83	686	754	1433	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1.5	10	-5	60	50	55.44	32.13	7.74	1260	1260	62.1	32.13	138	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170942	3265
MYR 5,546.80	1 Piece(s)	Quote	-	-	40	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	100	-	-
MYR 4,277.51	1 Piece(s)	Quote	125	G1/8	40	Sliding guide	0.8	0.7	-	-	-	-	-	686	754	1983	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1.5	10	-20	80	50	-	-	7.3	-	-	-	-	168	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170868	4123
MYR 4,702.15	1 Piece(s)	Quote	-	-	40	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	125	-	-
MYR 5,480.05	1 Piece(s)	Quote	125	G1/8	40	Recirculating ball bearing guide	0.8	0.7	1130	1130	49.74	40.13	40.13	686	754	1597	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1.5	10	-5	60	50	55.44	44.73	8.64	1260	1260	79	44.73	161	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170943	3717
MYR 6,024.91	1 Piece(s)	Quote	-	-	40	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	125	-	-
MYR 4,623.64	1 Piece(s)	Quote	160	G1/8	40	Sliding guide	0.8	0.7	-	-	-	-	-	686	754	2183	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1.5	10	-20	80	50	-	-	6.4	-	-	-	-	146	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170869	4736
MYR 5,082.73	1 Piece(s)	Quote	-	-	40	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	160	-	-
MYR 6,088.15	1 Piece(s)	Quote	160	G1/8	40	Recirculating ball bearing guide	0.8	0.7	1130	1130	49.74	40.13	40.13	686	754	1738	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1.5	10	-5	60	50	55.44	44.73	7.49	1260	1260	94.4	44.73	143	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170944	4271
MYR 6,693.60	1 Piece(s)	Quote	-	-	40	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	160	-	-
MYR 5,019.05	1 Piece(s)	Quote	200	G1/8	40	Sliding guide	0.8	0.7	-	-	-	-	-	686	754	2411	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1.5	10	-20	80	50	-	-	5.5	-	-	-	-	127	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170870	5437
MYR 5,517.65	1 Piece(s)	Quote	-	-	40	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	200	-	-
MYR 6,783.04	1 Piece(s)	Quote	200	G1/8	40	Recirculating ball bearing guide	0.8	0.7	1130	1130	49.74	40.13	40.13	686	754	1899	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1.5	10	-5	60	50	55.44	44.73	6.5	1260	1260	112.3	44.73	127	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170945	4905
MYR 7,458.00	1 Piece(s)	Quote	-	-	40	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	200	-	-
MYR 3,610.35	1 Piece(s)	Quote	25	G1/4	50	Sliding guide	0.6	1	-	-	-	-	-	1057	1178	2026	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-20	80	50	-	-	14.1	-	-	-	-	257	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170871	3440
MYR 3,968.11	1 Piece(s)	Quote	-	-	50	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	25	-	-
MYR 4,163.13	1 Piece(s)	Quote	25	G1/4	50	Recirculating ball bearing guide	0.6	1	1487	1487	81.79	31.98	31.98	1057	1178	1796	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-5	60	50	88	34.4	19.35	1600	1600	30.6	34.4	235	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170946	3212
MYR 4,576.29	1 Piece(s)	Quote	-	-	50	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	25	-	-
MYR 3,882.89	1 Piece(s)	Quote	50	G1/4	50	Sliding guide	0.6	1	-	-	-	-	-	1057	1178	2254	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-20	80	50	-	-	11.8	-	-	-	-	216	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170872	4085
MYR 4,267.96	1 Piece(s)	Quote	-	-	50	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	50	-	-
MYR 4,648.44	1 Piece(s)	Quote	50	G1/4	50	Recirculating ball bearing guide	0.6	1	1487	1487	81.79	31.98	31.98	1057	1178	1969	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-5	60	50	88	34.4	15.51	1600	1600	39.5	34.4	202	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170947	3801
MYR 5,110.00	1 Piece(s)	Quote	-	-	50	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	50	-	-
MYR 4,209.67	1 Piece(s)	Quote	80	G1/4	50	Sliding guide	0.6	1	-	-	-	-	-	1057	1178	2687	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-20	80	50	-	-	12.8	-	-	-	-	234	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170873	5013
MYR 4,627.44	1 Piece(s)	Quote	-	-	50	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	80	-	-
MYR 5,230.89	1 Piece(s)	Quote	80	G1/4	50	Recirculating ball bearing guide	0.6	1	1487	1487	81.79	47.58	47.58	1057	1178	2287	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-5	60	50	88	51.2	16.43	1600	1600	57.4	51.2	233	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170948	4614
MYR 5,750.73	1 Piece(s)	Quote	-	-	50	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	80	-	-
MYR 4,427.96	1 Piece(s)	Quote	100	G1/4	50	Sliding guide	0.6	1	-	-	-	-	-	1057	1178	2870	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-20	80	50	-	-	11.6	-	-	-	-	212	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170874	5511
MYR 4,867.40	1 Piece(s)	Quote	-	-	50	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	100	-	-
MYR 5,619.22	1 Piece(s)	Quote	100	G1/4	50	Recirculating ball bearing guide	0.6	1	1487	1487	81.79	47.58	47.58	1057	1178	2425	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-5	60	50	88	51.2	14.76	1600	1600	65.6	51.2	214	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170949	5068
MYR 6,177.89	1 Piece(s)	Quote	-	-	50	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	100	-	-
MYR 4,716.65	1 Piece(s)	Quote	125	G1/4	50	Sliding guide	0.6	1	-	-	-	-	-	1057	1178	3249	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-20	80	50	-	-	12.5	-	-	-	-	229	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170875	6302
MYR 5,183.42	1 Piece(s)	Quote	-	-	50	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	125	-	-
MYR 6,120.98	1 Piece(s)	Quote	125	G1/4	50	Recirculating ball bearing guide	0.6	1	1487	1487	81.79	62.46	62.46	1057	1178	2703	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-5	60	50	88	67.2	15.77	1600	1600	82.8	67.2	238	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170950	5758
MYR 6,711.80	1 Piece(s)	Quote	-	-	50	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	125	-	-
MYR 5,098.18	1 Piece(s)	Quote	160	G1/4	50	Sliding guide	0.6	1	-	-	-	-	-	1057	1178	3569	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-20	80	50	-	-	11	-	-	-	-	200	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170876	7205
MYR 5,603.09	1 Piece(s)	Quote	-	-	50	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	160	-	-
MYR 6,800.51	1 Piece(s)	Quote	160	G1/4	50	Recirculating ball bearing guide	0.6	1	1487	1487	81.79	62.46	62.46	1057	1178	2945	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-5	60	50	88	67.2	13.78	1600	1600	98.1	67.2	212	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170951	6583
MYR 7,475.71	1 Piece(s)	Quote	-	-	50	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	160	-	-
MYR 5,534.02	1 Piece(s)	Quote	200	G1/4	50	Sliding guide	0.6	1	-	-	-	-	-	1057	1178	3935	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-20	80	50	-	-	9.6	-	-	-	-	174	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170877	8238
MYR 6,082.69	1 Piece(s)	Quote	-	-	50	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	200	-	-
MYR 7,577.29	1 Piece(s)	Quote	200	G1/4	50	Recirculating ball bearing guide	0.6	1	1487	1487	81.79	62.46	62.46	1057	1178	3221	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-5	60	50	88	67.2	12.04	1600	1600	115.9	67.2	189	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170952	7525
MYR 8,330.29	1 Piece(s)	Quote	-	-	50	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	200	-	-
MYR 3,992.62	1 Piece(s)	Quote	25	G1/4	63	Sliding guide	0.6	1.3	-	-	-	-	-	1750	1870	2471	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-20	80	50	-	-	15.9	-	-	-	-	257	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170878	4470
MYR 4,388.71	1 Piece(s)	Quote	-	-	63	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	25	-	-
MYR 4,531.65	1 Piece(s)	Quote	25	G1/4	63	Recirculating ball bearing guide	0.6	1.3	1487	1487	92.97	31.98	31.98	1750	1870	2241	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-5	60	50	100	34.4	21.98	1600	1600	27.8	34.4	235	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170953	4242
MYR 4,981.64	1 Piece(s)	Quote	-	-	63	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	25	-	-
MYR 4,274.53	1 Piece(s)	Quote	50	G1/4	63	Sliding guide	0.6	1.3	-	-	-	-	-	1750	1870	2699	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-20	80	50	-	-	13.3	-	-	-	-	216	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170879	5243
MYR 4,698.55	1 Piece(s)	Quote	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
MYR 5,077.02	1 Piece(s)	Quote	50	G1/4	63	Recirculating ball bearing guide	0.6	1.3	1487	1487	92.97	31.98	31.98	1750	1870	2413	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-5	60	50	100	34.4	17.62	1600	1600	35.8	34.4	202	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170954	4959
MYR 5,581.42	1 Piece(s)	Quote	-	-	63	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	50	-	-
MYR 4,629.22	1 Piece(s)	Quote	80	G1/4	63	Sliding guide	0.6	1.3	-	-	-	-	-	1750	1870	3130	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-20	80	50	-	-	14.4	-	-	-	-	234	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170880	6287
MYR 5,087.16	1 Piece(s)	Quote	-	-	63	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	80	-	-
MYR 5,747.69	1 Piece(s)	Quote	80	G1/4	63	Recirculating ball bearing guide	0.6	1.3	1487	1487	92.97	47.58	47.58	1750	1870	2731	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-5	60	50	100	51.2	18.67	1600	1600	51.9	51.2	233	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170955	5888
MYR 6,317.40	1 Piece(s)	Quote	-	-	63	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	80	-	-
MYR 4,854.64	1 Piece(s)	Quote	100	G1/4	63	Sliding guide	0.6	1.3	-	-	-	-	-	1750	1870	3313	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-20	80	50	-	-	13.1	-	-	-	-	212	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170881	6904
MYR 5,335.25	1 Piece(s)	Quote	-	-	63	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	100	-	-
MYR 6,183.84	1 Piece(s)	Quote	100	G1/4	63	Recirculating ball bearing guide	0.6	1.3	1487	1487	92.97	47.58	47.58	1750	1870	2868	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-5	60	50	100	51.2	16.77	1600	1600	59.4	51.2	214	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170956	6461
MYR 6,797.38	1 Piece(s)	Quote	-	-	63	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	100	-	-
MYR 5,136.44	1 Piece(s)	Quote	125	G1/4	63	Sliding guide	0.6	1.3	-	-	-	-	-	1750	1870	3692	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-20	80	50	-	-	14.1	-	-	-	-	229	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170882	7824
MYR 5,645.27	1 Piece(s)	Quote	-	-	63	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	125	-	-
MYR 6,729.11	1 Piece(s)	Quote	125	G1/4	63	Recirculating ball bearing guide	0.6	1.3	1487	1487	92.97	62.46	62.46	1750	1870	3146	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-5	60	50	100	67.2	17.92	1600	1600	75.2	67.2	238	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170957	7279
MYR 7,396.98	1 Piece(s)	Quote	-	-	63	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	125	-	-
MYR 5,531.02	1 Piece(s)	Quote	160	G1/4	63	Sliding guide	0.6	1.3	-	-	-	-	-	1750	1870	4010	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-20	80	50	-	-	12.3	-	-	-	-	200	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170883	8906
MYR 6,079.02	1 Piece(s)	Quote	-	-	63	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	160	-	-
MYR 7,492.44	1 Piece(s)	Quote	160	G1/4	63	Recirculating ball bearing guide	0.6	1.3	1487	1487	92.97	62.46	62.46	1750	1870	3386	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-5	60	50	100	67.2	15.66	1600	1600	89.6	67.2	212	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170958	8283
MYR 8,236.73	1 Piece(s)	Quote	-	-	63	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	160	-	-
MYR 5,982.05	1 Piece(s)	Quote	200	G1/4	63	Sliding guide	0.6	1.3	-	-	-	-	-	1750	1870	4375	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-20	80	50	-	-	10.7	-	-	-	-	174	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170884	10142
MYR 6,575.27	1 Piece(s)	Quote	-	-	63	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	200	-	-
MYR 8,364.73	1 Piece(s)	Quote	200	G1/4	63	Recirculating ball bearing guide	0.6	1.3	1487	1487	92.97	62.46	62.46	1750	1870	3660	Wrought aluminum alloy	Wrought aluminum alloy	NBR	1	10	-5	60	50	100	67.2	13.68	1600	1600	106.5	67.2	189	Compressed air as per ISO 8573-1:2010 [7:4:4]	0 - No corrosion stress	-	170959	9429
MYR 9,196.36	1 Piece(s)	Quote	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
MYR 5,283.05	1 Piece(s)	Quote	25	G3/8	80	Sliding guide	0.4	0.75	-	-	-	-	-	2827	3016	4141	Wrought aluminum alloy	Wrought aluminum alloy	NBR	0.5	10	-	-	125	-	-	21.4	-	-	-	-	276	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	-	-
MYR 5,725.96	1 Piece(s)	Quote	50	G3/8	80	Sliding guide	0.4	0.75	-	-	-	-	-	2827 N	3016 N	4717	Wrought aluminum alloy	Wrought aluminum alloy	NBR	0.5	10	-20	80	125	-	-	24.2	-	-	-	-	311	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170886	8185
MYR 6,241.18	1 Piece(s)	Quote	-	-	80	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	80	-	-
MYR 6,611.89	1 Piece(s)	Quote	-	-	80	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	100	-	-
MYR 7,054.76	1 Piece(s)	Quote	125	G3/8	80	Sliding guide	0.4	0.75	-	-	-	-	-	2827 N	3016 N	6076	Wrought aluminum alloy	Wrought aluminum alloy	NBR	0.5	10	-20	80	125	-	-	23.5	-	-	-	-	304	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170889	11490
MYR 7,674.78	1 Piece(s)	Quote	160	G3/8	80	Sliding guide	0.4	0.75	-	-	-	-	-	2827 N	3016 N	6553	Wrought aluminum alloy	Wrought aluminum alloy	NBR	0.5	10	-20	80	125	-	-	21.3	-	-	-	-	274	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170890	12910
MYR 8,399.89	1 Piece(s)	Quote	-	-	80	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	200	-	-
MYR 6,663.58	1 Piece(s)	Quote	-	-	100	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	25	-	-
MYR 7,224.75	1 Piece(s)	Quote	50	G3/8	100	Sliding guide	0.4	1	-	-	-	-	-	4418 N	4712 N	7113	Wrought aluminum alloy	Wrought aluminum alloy	NBR	0.5	10	-20	80	125	-	-	47.8	-	-	-	-	509	Compressed air as per ISO 8573-1:2010 [7:4:4]	1 - Low corrosion stress	-	170893	12589
MYR 7,914.53	1 Piece(s)	Quote	-	-	100	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	80	-	-
MYR 8,363.51	1 Piece(s)	Quote	-	-	100	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	100	-	-
MYR 8,924.76	1 Piece(s)	Quote	-	-	100	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	125	-	-
MYR 9,710.62	1 Piece(s)	Quote	-	-	100	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	160	-	-
MYR 10,608.62	1 Piece(s)	Quote	-	-	100	-	-	-	-	-	-	-	-	-	-	-	Anodised wrought aluminium alloy	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	200	-	-

Part Number

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Stroke (mm)	Pneumatic connection	Piston diameter (mm)	Guide	Max. speed (m/s)	Impact energy in the end positions (J)	Max. force Fy (N)	Max. force Fz (N)	Max. torque Mx (Nm)	Max. torque My (Nm)	Max. torque Mz (Nm)	Theoretical force at 6 bar, retracting (N)	Theoretical force at 6 bar, advancing (N)	Moving mass (g)	Housing material	Cover material	Seals material	Min. Operating pressure (bar)	Max. Operating pressure (bar)	Min. Ambient temperature (°C)	Max. Ambient temperature (°C)	Distance of centre of gravity of payload to yoke plate xs (mm)	Max. static moment Mx (Nm)	Max. static moment My (Nm)	Max. permissible torque load Mx as a function of the stroke (Nm)	Max. force Fz static (N)	Max. force Fy static (N)	Center of gravity of the moving mass as a function of the stroke (mm)	Max. static moment Mz (Nm)	Max. payload as a function of the stroke at defined distance xs (N)	Operating medium	Corrosion resistance class (CRC)	Stroke (mm)	Manufacturer part #	Weight (g)

Download (PDF)

Catalog (2 page view)

Product TOP

Basic Information

Piston rod material	High-alloy stainless steel

Configure

266 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Stroke(mm)
5

10

15

20

25

30

40

50

80

100

125

160

200
Clear
Piston diameter(mm)
6

10

12

16

20

25

32

40

50

63

80

100
Clear
Guide
- Recirculating ball bearing guide
- Sliding guide
Clear
Max. speed(m/s)
- 0.4
- 0.6
- 0.8
- 1.3
- 1.7
Clear
Impact energy in the end positions(J)
0.012

0.035

0.07

0.15

0.2

0.3

0.4

0.7

0.75

1

1.3
Clear
Max. force Fy(N)
193

292

389

408

778

817

863

1130

1487
Clear
Max. force Fz(N)
193

292

389

408

778

817

863

1130

1487
Clear
Max. torque Mx(Nm)
3.95

5.99

8.95

11.84

17.9

23.69

29.35

44.09

49.74

81.79

92.97
Clear
Max. torque My(Nm)
1.74

3.07

3.89

4.49

10.5

12.52

15.11

16.83

18.66

28.83

31.98

40.13

47.58

62.46
Clear
Max. torque Mz(Nm)
1.74

3.07

3.89

4.49

10.5

12.52

15.11

16.83

18.66

28.83

31.98

40.13

47.58

62.46
Clear
Theoretical force at 6 bar, retracting(N)
13

47

51

90

141

247

415

686

1057

1750

2827

2827 N

4418 N
Clear
Theoretical force at 6 bar, advancing(N)
17

68

121

188

295

482

754

1178

1870

3016

3016 N

4712 N
Clear
Moving mass(g)
8

9

10

11.5

13

18.5

21

155

165

170

172

175

186

193

196

200

206

212

221

229

232

237

241

242

246

249

253

257

264

289

294

310

318

343

359

364

376

385

388

392

400

415

428

471

488

512

552

582

584

595

611

626

632

650

669

672

680

687

711

732

755

793

802

863

875

895

904

915

955

979

996

1020

1049

1074

1077

1134

1173

1175

1191

1228

1254

1352

1371

1418

1433

1450

1559

1564

1597

1629

1720

1738

1743

1796

1803

1899

1969

1983

2003

2026

2183

2232

2241

2254

2287

2411

2413

2425

2471

2687

2699

2703

2731

2868

2870

2945

3130

3146

3221

3249

3313

3386

3569

3660

3692

3935

4010

4141

4375

4717

6076

6553

7113
Clear
Housing material
- Anodised wrought aluminium alloy
- Wrought aluminum alloy
- Wrought aluminum alloy, anodized
Clear
Cover material
- High-alloy stainless steel
- Wrought aluminum alloy
Clear
Seals material
- NBR
Clear
Min. Operating pressure(bar)
- 0.5
- 1
- 1.5
- 2
Clear
Max. Operating pressure(bar)
- 8
- 10
Clear
Min. Ambient temperature(°C)
- -20
- -5
Clear
Max. Ambient temperature(°C)
- 60
- 80
Clear
Distance of centre of gravity of payload to yoke plate xs(mm)
- 10
- 25
- 50
- 125
Clear
Max. static moment Mx(Nm)
7.28

9.55

14.79

16.48

19.09

29.58

36.04

49.14

55.44

88

100
Clear
Max. static moment My(Nm)
3.2

4.15

5.61

8.44

11.2

15.37

18.87

20.67

20.79

32.13

34.4

44.73

51.2

67.2
Clear
Max. permissible torque load Mx as a function of the stroke(Nm)
0.006

0.007

0.008

0.011

0.034

0.039

0.046

0.057

0.4

0.45

0.48

0.5

0.56

0.6

0.61

0.65

0.66

0.72

0.73

0.81

0.88

1.14

1.18

1.23

1.28

1.3

1.44

1.52

1.56

1.64

1.68

1.7

1.75

1.77

1.79

1.85

2.03

2.08

2.1

2.19

2.24

2.35

2.43

2.63

2.8

2.9

2.92

2.95

3

3.2

3.36

3.8

3.81

3.9

4.1

4.2

4.23

4.33

4.64

5

5.43

5.5

5.7

5.76

5.77

5.8

5.94

6.14

6.2

6.4

6.5

6.64

6.7

6.86

7

7.09

7.2

7.3

7.49

7.66

7.71

7.74

7.77

7.9

8

8.6

8.64

8.7

9.08

9.6

9.62

10.25

10.7

11

11.6

11.8

12.04

12.3

12.5

12.8

13.1

13.3

13.68

13.78

14.1

14.4

14.76

15.51

15.66

15.77

15.9

16.43

16.77

17.62

17.92

18.67

19.35

21.3

21.4

21.98

23.5

24.2

47.8
Clear
Max. force Fz static(N)
355

415

510

804

830

1020

1060

1260

1600
Clear
Max. force Fy static(N)
355

415

510

804

830

1020

1060

1260

1600
Clear
Center of gravity of the moving mass as a function of the stroke(mm)
13.4

13.6

15.2

16.5

16.7

17.5

18.3

19.1

20.8

24.6

25.3

26.3

26.4

27.8

28

28.2

29

29.8

30.6

31.2

33.4

34.6

34.9

35.2

35.8

37.1

37.3

38.5

38.8

39.5

40.6

47.8

48.8

50.9

51.9

53.9

54.7

56.5

57.4

59.4

62.1

63

65.6

75.2

79

80.9

82.8

89.6

94.4

96.4

98.1

106.5

112.3

114.6

115.9
Clear
Max. static moment Mz(Nm)
3.2

4.15

5.61

8.44

11.2

15.37

18.87

20.67

20.79

32.13

34.4

44.73

51.2

67.2
Clear
Max. payload as a function of the stroke at defined distance xs(N)
0.5

0.65

0.85

1.1

2

2.4

3

3.7

19

20

21

22

23

24

28

31

37

39

41

42

44

45

46

49

51

53

55

56

58

61

63

64

67

73

77

78

82

86

95

96

102

103

105

108

110

112

115

116

119

121

123

126

127

135

138

143

144

146

149

150

151

155

161

166

168

173

174

180

188

189

200

202

212

214

216

229

233

234

235

238

257

274

276

304

311

509
Clear
Operating medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
Clear
Corrosion resistance class (CRC)
- 0 - No corrosion stress
- 1 - Low corrosion stress
Clear
Stroke(mm)
10

20

25

30

40

50

80

100

125

160

200
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

Top of the page

Payment Method

Credit Card
Bank Transfer

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm

Tel: (60) 3 7890 6399

Inquiry

All Categories

Categories

Search by Application

Brands

How can we improve?

Linear drive, DFM Series (Part Numbers)

2D/3D CAD ?

2D CAD Data with Dim. Fixed

Linear drive, DFM Series

Features

Specifications

Speeds [m/s]

Basic Information

Configure

Specification/Dimensions

Stroke(mm)

Piston diameter(mm)

Guide

Max. speed(m/s)

Impact energy in the end positions(J)

Max. force Fy(N)

Max. force Fz(N)

Max. torque Mx(Nm)

Max. torque My(Nm)

Max. torque Mz(Nm)

Theoretical force at 6 bar, retracting(N)

Theoretical force at 6 bar, advancing(N)

Moving mass(g)

Housing material

Cover material

Seals material

Min. Operating pressure(bar)

Max. Operating pressure(bar)

Min. Ambient temperature(°C)

Max. Ambient temperature(°C)

Distance of centre of gravity of payload to yoke plate xs(mm)

Max. static moment Mx(Nm)

Max. static moment My(Nm)

Max. permissible torque load Mx as a function of the stroke(Nm)

Max. force Fz static(N)

Max. force Fy static(N)

Center of gravity of the moving mass as a function of the stroke(mm)

Max. static moment Mz(Nm)

Max. payload as a function of the stroke at defined distance xs(N)

Operating medium

Corrosion resistance class (CRC)