(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
Air-operated 2-port valve, manifold, compact cylinder valve GNAB/GNAB□V series.
[Features]
·NC (normally closed) type, NO (normally open) type, and double-acting type are available.
·Connection port size: Rc1/4, Rc3/8.
·Operating fluid: Air, water, gas, and low vacuum.
Part Number
Configured Part Number is shown.
Centralized air supply type (Port C: pressurization; port A vacuum pump side)
●GNAB※-1-0-02·B2·D2·E2·12·22
GNAB※V-1-0-02·B2·D2·E2·12·22
● GNAB * -1-0-(No symbol), B, D, E, 1, 2
GNAB * V-1-0-(No symbol), B, D, E, 1, 2
● Actuator mounting dimensions
Individual air supply type (Port A: pressurization; port C vacuum pump side)
●GNAB※-5-0-02·B2·D2·E2·12·22
GNAB※V-5-0-02·B2·D2·E2·12·22
*1: Dimensions in () are for stainless steel body.
● GNAB * -5-0-(No symbol), B, D, E, 1, 2
GNAB * V-5-0-(No symbol), B, D, E, 1, 2
*1: Dimensions in () are for stainless steel body.
● Actuator mounting dimensions
●GNAB※-1·5-2 to 10-02·B2·62·72·D2·E2·12·22
GNAB※V-1·5-2 to 10-02·B2·62·72·D2·E2·12·22
*1: Dimensions in () are for stainless steel body.
● GNAB * -1, 5-2 to 10-(No symbol), B, 6, 7, D, E, 1, 2
GNAB * V-1, 5-2 to 10-(No symbol), B, 6, 7, D, E, 1, 2
*1: Dimensions in () are for stainless steel body.
● Quick-connect fitting, straight type
GNAB※-1·5-2 to 10-02·B2·62·72·D2·E2·12·22
GNAB※V-1·5-2 to 10-02·B2·62·72·D2·E2·12·22
● Quick-connect fitting, L type
GNAB※-1·5-2 to 10-02·B2·62·72·D2·E2·12·22
GNAB※V-1·5-2 to 10-02·B2·62·72·D2·E2·12·22
● Centralized air supply type (Port C: pressurization; port A vacuum pump side)
NC (normally closed) type
NO (normally open) type
Double-acting operation type
● Individual air supply type (Port A: pressurization; port C vacuum pump side)
NC (normally closed) type
NO (normally open) type
Double-acting operation type
Items | GNAB※ | GNAB※V | ||||
---|---|---|---|---|---|---|
GNAB1 | GNAB2 | GNAB3 | GNAB1V | GNAB2V | GNAB3V | |
Operating method | NC (Normally closed) type | NO (Normally open) type | Double-acting operation type | NC (Normally closed) type | NO (Normally open) type | Double-acting operation type |
Operating fluid | Air, water, and gas | Low vacuum (air, water) | ||||
Fluid viscosity (mm^2/s) | 500 or less | |||||
Operating pressure | 0 to 0.7 MPa | 1.3 × 10^2 to 7 × 10^5 Pa (abs) | ||||
Pressure resistance (with water pressure) (MPa) | 1.4 | |||||
Fluid temperature (°C) | -10 to +60 (No freezing) (*1) | |||||
Ambient temperature (°C) | -10 to +60 | |||||
Valve Seat Leakage | 0.12 cm^3 / min or less (with pneumatic pressure) | 1.33 × 10^-3 Pa·m^3 / sHe or less | ||||
Orifice Diameter (mm) | 7 | |||||
Cv Factor | 1.0 | |||||
C[dm^3 / (s·bar)] | 3.8 (※2) | |||||
b | 0.3 | |||||
Mounting orientation | Swivel | |||||
Pilot fluid | Air | |||||
Pilot pressure (MPa) | 0.25 to 0.7 | (※3) | 0.25 to 0.7 | (※3) | ||
Pilot connection size | Rc1/8 (Note that it varies depending on the type.) |
*1: The same applies to the seal material of nitrile rubber and fluoroelastomer.
*2: The conversion formula between the effective cross-sectional area S and the sonic conductance C is S ≈ 5.0 × C.
*3: Please refer to the following for the pilot pressure of NO type and double-acting type.
■Pilot pressure
Please use the pilot pressure within the specified range. In particular, set the pilot pressures for the GNAB series of the NO type and double-acting operation type as shown in the graph below.
If it is used below the set range of the graph, a seal failure will occur, and if it is used above the set range, the durability will decrease.
If the pilot pressure cannot be controlled, it is recommended to select the model number of the NC type.
GNAB2/2V series
GNAB3/3V series
Number of units | Brass, Stainless Steel Sub-plate | Aluminum sub-plate | Manifold Configuration *1 | Number of units | Brass, Stainless Steel Sub-plate | Aluminum sub-plate | Manifold Configuration *1 | ||||
---|---|---|---|---|---|---|---|---|---|---|---|
AA | BB | AA | BB | AA | BB | AA | BB | ||||
2 | 106 | 122 | 105 | 121 | Dual unit × 1 | 7 | 329 | 345 | 327 | 343 | 5-unit + dual unit |
3 | 145 | 161 | 144 | 160 | 3-unit × 1 | 8 | 368 | 384 | 366 | 382 | 5-unit + 3-unit |
4 | 211 | 227 | 210 | 226 | Dual unit × 2 | 9 | 435 | 451 | 432 | 448 | 3-unit × 3 |
5 | 223 | 239 | 222 | 238 | 5-unit × 1 | 10 | 446 | 462 | 444 | 460 | 5-unit × 2 |
6 | 290 | 306 | 288 | 304 | 3-unit × 2 | — | — | — | — | — | — |
*1: The manifold configuration is a connection type based on dual unit, 3-unit, and 5-unit.
Pilot Port Connection Port Diameter | A |
---|---|
C4 | 7 |
C6 | 8.5 |
C18 | 3.5 |
Pilot Port Connection Port Diameter | B | C | D | E | F |
---|---|---|---|---|---|
CL4 | 6.5 | 11.5 | 14 | 17 | 22 |
CL6 | 7.5 | 12.5 | 16 | 18 | 23 |
CL18 | 4 | 7 | 8.5 | 11 | 14 |
Part Number |
---|
GNAB1V-1-0 |
GNAB1V-1-0-B |
GNAB1V-1-0-E |
GNAB1V-5-0 |
GNAB1V-5-0-B |
GNAB1V-5-0-E |
GNAB2V-1-0 |
GNAB2V-5-0-B |
GNAB3V-1-0-1 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Applicable Fluid | Plumbing Thread Nominal | Switching Type | Material of Body | Seal Material | Air supply classification | Sub-plate material |
---|---|---|---|---|---|---|---|---|---|---|---|
MYR 299.31 | 1 Piece(s) | 16 Day(s) or more | Vacuum | 3/8 | [Normally Closed] 2-Port Normally Closed | Polypropylene | Nitrile rubber | Centralized air supply type (port C: pressurization), port A: vacuum pump side | Brass | ||
MYR 357.09 | 1 Piece(s) | 16 Day(s) or more | Vacuum | 3/8 | [Normally Closed] 2-Port Normally Closed | Polypropylene | Fluoroelastomer | Centralized air supply type (port C: pressurization), port A: vacuum pump side | Brass | ||
MYR 613.36 | 1 Piece(s) | 16 Day(s) or more | Vacuum | 3/8 | [Normally Closed] 2-Port Normally Closed | Stainless steel | Fluoroelastomer | Centralized air supply type (port C: pressurization), port A: vacuum pump side | Stainless steel | ||
MYR 299.31 | 1 Piece(s) | 16 Day(s) or more | Vacuum | 1/4 | [Normally Closed] 2-Port Normally Closed | Polypropylene | Nitrile rubber | Individual air supply type (port A: pressurization), port C: vacuum pump side | Brass | ||
MYR 357.09 | 1 Piece(s) | 16 Day(s) or more | Vacuum | 1/4 | [Normally Closed] 2-Port Normally Closed | Polypropylene | Fluoroelastomer | Individual air supply type (port A: pressurization), port C: vacuum pump side | Brass | ||
MYR 613.36 | 1 Piece(s) | 16 Day(s) or more | Vacuum | 1/4 | [Normally Closed] 2-Port Normally Closed | Stainless steel | Fluoroelastomer | Individual air supply type (port A: pressurization), port C: vacuum pump side | Stainless steel | ||
MYR 299.31 | 1 Piece(s) | 16 Day(s) or more | Vacuum | 3/8 | [Normally Open] 3-Port Normally Open | Polypropylene | Nitrile rubber | Centralized air supply type (port C: pressurization), port A: vacuum pump side | Brass | ||
MYR 357.09 | 1 Piece(s) | 16 Day(s) or more | Vacuum | 1/4 | [Normally Open] 3-Port Normally Open | Polypropylene | Fluoroelastomer | Individual air supply type (port A: pressurization), port C: vacuum pump side | Brass | ||
MYR 299.31 | 1 Piece(s) | 16 Day(s) or more | Vacuum | 3/8 | [Others] Double Action Type | Polypropylene | Nitrile rubber | Centralized air supply type (port C: pressurization), port A: vacuum pump side | Aluminum |
Loading...
Type | Air Operated Type | Operating Environment | Standard | Connection Type | Rc |
---|---|---|---|---|---|
Manifold stations | Actuator only | Pilot Connection Port Diameter | Rc1/8 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy