(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that some of the items may take longer lead time to ship due to Japan New Year holidays (29-Dec-2024 to 5-Jan-2025). Early order placement is recommended. We apologize for the inconvenience caused and appreciate your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
D5000 Series Contact【1-1,200 Pieces Per Package】 (316041-6)
A D5000 series contact.
[Features]
· High current contact: A box-shaped contact concept has been adopted that is resilient against “twisting, ” based off our proven dynamic series. With a newly-developed copper alloy material similar to that used in the D-3000 series, exceptional springiness and electric inductance is provided with this reliable recessed contact. Furthermore, the silver-plated D-5000α series is also available, covering an even higher range of currents. Contacts are available to suit the needs of particular jobs.
· Sequential contact: Sequential contact is possible in order to release (by grounding) built-up static electricity before mating. A long tab has been developed for the sequential connection of tab contacts. Through the combined use of these and normal tab contacts, a sequential connection environment can be constructed.
· Tine (lead) for high currents: the board mounting tines (leads) are the newly developed twin lead type. Definite patterns and connector linkages can be made in order to preserve a wide connection surface area on printed circuit boards.
· IP20 (protects fingers from getting too close): the reverse mounting D-5300 type is proposed for applications with an electrically powered device. By using housing that can accommodate a recessed contact in the device (panel), IP-20 standards for the device's connector are met.
Part Number
Configured Part Number is shown.
316041-6
| Part Number |
|---|
| 316041-6 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable pin/contact | Applicable wire range (AWG) | Applicable wire range (mm2) | Wire range mark | Contact plating | Packing Type | Insulation coating outer diameter (mm) | Applicable tools model number |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 7.98 | 1 Piece(s) | 2 Day(s) or more | 10 | Female | 12 to 10 | 3.50 to 5.50 | M | Silver 2.54 μm | Individual | 4.0 to 5.2 | 234171-1 (hand tool)/2155369-1 (electric operated hydraulic tools)/2155503-1 (dice)/2151086-2 (mini-applicator) |
Loading...
Basic Information
| Connector series initials | Katakana | Katakana | Dynamic | Wire connection method | Crimp |
|---|---|---|---|---|---|
| Material | Copper Alloy |
Please check the type/dimensions/specifications of the part 316041-6 in the D5000 Series Contact series.
Specification/Dimensions
-
Applicable pin/contact
- Male
- Female
-
Applicable wire range(AWG)
-
Applicable wire range(mm2)
- 0.50 to 1.25
- 1.25 to 2.20
- 3.50 to 5.50
- 8.00
-
Wire range mark
- L
- M
- S
- SS
-
Contact plating
- Gold 0.2 μm
- Gold 0.38 μm
- Gold 0.76 μm
- Silver 2.54 μm
-
Packing Type
- Chain
- Individual
-
Insulation coating outer diameter(mm)
- 1.8 to 3.23
- 3.0 to 3.8
- 4.0 to 5.2
- 4.9 to 7.8
-
CAD
- 2D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 4 Day(s) or Less
- 8 Day(s) or Less
- 13 Day(s) or Less
- 31 Day(s) or Less
- 69 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| 1318985-6 |
| 1318986-6 |
| 179956-2 |
| 84695-1 |
| 917802-2 |
| 917803-2 |
| Part Number | Standard Unit Price | Number of pc(s). included in pkg. | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable pin/contact | Applicable wire range (AWG) | Applicable wire range (mm2) | Wire range mark | Contact plating | Packing Type | Insulation coating outer diameter (mm) | Applicable tools model number |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 11.18 | 54 Piece(s) | 69 Day(s) or more | - | Female | 20 to 16 | 0.50 to 1.25 | SS | Silver 2.54 μm | Chain | 1.8 to 3.23 | 91596-1 ( hand tool) | |||
MYR 723.93 | 100 Pieces Per Package | 1 Pack(s) | 4 Day(s) or more | 10 | Female | 20 to 16 | 0.50 to 1.25 | SS | Silver 2.54 μm | Individual | 1.8 to 3.23 | 91596-1 ( hand tool) | ||
MYR 3,869.81 | 1,200 Pieces Per Package | 1 Pack(s) | 4 Day(s) or more | 10 | Female | 12 to 10 | 3.50 to 5.50 | M | Gold 0.38 μm | Chain | 4.0 to 5.2 | 234171-1 (hand tool)/2155369-1 (electric operated hydraulic tools)/2155503-1 (dice)/2151086-2 (mini-applicator) | ||
MYR 7.71 | 1,200 Piece(s) | 4 Day(s) or more | 10 | Male | 12 to 10 | 3.50 to 5.50 | M | Gold 0.2 μm | Chain | 4.0 to 5.2 | 234171-1 (hand tool)/2155369-1 (electric operated hydraulic tools)/2155503-1 (dice)/2151086-2 (mini-applicator) | |||
MYR 11.62 | 5 Piece(s) | 13 Day(s) or more | - | Male | 16 to 14 | 1.25 to 2.20 | S | Gold 0.38 μm | Chain | 3.0 to 3.8 | 234171-1 (hand tool)/2155369-1 (electric operated hydraulic tools)/2155503-1 (dice)/2151086-2 (mini-applicator) | |||
MYR 7.62 | 5 Piece(s) | 13 Day(s) or more | - | Male | 12 to 10 | 3.50 to 5.50 | M | Gold 0.38 μm | Chain | 4.0 to 5.2 | 234171-1 (hand tool)/2155369-1 (electric operated hydraulic tools)/2155503-1 (dice)/2151086-2 (mini-applicator) |
Additional Products in this Category
- Dynamic Connector Crimped Contact Cable (D3100 / D3200 Series)
- 3191 Connector Crimped Contact Cable
- MIL Connector Crimped Female Contact
- PH Connector Contact
- Contact for Mini Universal MATE-N-LOK
- LY Series, Contact
- PH Connector Contacts
- Contact for .040/.070 Hybrid I/O Connectors
Customers Who Viewed This Item Also Viewed
-
-
-
-
Dynamic Connector Contact (D5200 Series)MISUMI
Standard Price : MYR 200.21-
Days to Ship : 2 Day(s) or more
-
-
-
Dynamic Connector Contact (for D3100/D3200 Series)MISUMI
Standard Price : MYR 168.55-
Days to Ship : 2 Day(s) or more
-
Original Dynamic Connector Manual Crimping Tools (D5000 Series)MISUMI
Standard Price : MYR 1,119.59
Days to Ship : 4 Day(s) or more
-
Contact for Mini Universal MATE-N-LOKTE Connectivity
Standard Price : MYR 1.45-
Days to Ship : 1 Day(s) or more
-
-
-
Dynamic Connector Socket Housing (D5200 Series)MISUMI
Standard Price : MYR 55.18-
Days to Ship : 4 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy