(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that some of the items may take longer lead time to ship due to Japan New Year holidays (29-Dec-2024 to 5-Jan-2025). Early order placement is recommended. We apologize for the inconvenience caused and appreciate your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
1.27‑mm Pitch Two-Piece Connectors, HIF6 Series (HIF6A-50PA-1.27DS(71))
Board-to-board and board-to-cable connection variations available. Uses a flat-type cable with 1.27-mm pitch, so it can be used with each type of connector.
[Features]
・Product variation: connection methods include board-to-board model and cable pressure connection.
・Wide range of use: using flat-type cable with 1.27-mm pitch, it can be used with HIF2E, HIF3B, HIF5, etc.
・Compatible cables:
・Construction that prevents mis-insertion: mis-insertion prevention guide prevents accidental insertion.
Japanese Only
Part Number
Configured Part Number is shown.
HIF6A-50PA-1.27DS(71)
1.27‑mm Pitch Two-Piece Connectors
HIF6 Series list
Features of HIF6 Series 1.27‑mm Pitch Two-Piece Connectors
Product Standards
| Rating | Rated current: 0.5 A Rated voltage: 125 V AC | Operating temperature range: -55 to +85°C (Note 1) Operating humidity range: 40 to 80% | Storage temperature range -10 to +60°C (Note 2) Storage humidity range 40 to 70% (Note 2) |
|---|
| Item | Standard | Conditions |
|---|---|---|
| 1. Insulation resistance | 1,000 MΩ or more | Measure at 250 V DC |
| 2. Withstand voltage | There shall be no flashover or dielectric breakdown. | Energize at 300 V AC rms for 1 min |
| 3. Contact resistance | 30 mΩ or less | Measure at 0.1 A |
| 4. Vibration resistance | There shall be no electrical discontinuity for 1 μs or greater. | 10 to 55 Hz, Single amplitude: 0.75 mm, Three directions, 2 hours |
| 5. Humidity resistance | Insulation resistance: 1,000 MΩ or more | Leave at temperature 40°C ±2°C and humidity 90 to 95% for 96 hours |
| 6. Temperature cycle | There shall be no cracking or abnormalities with any of the parts. | (-65°C: 30 mins. > 15 to 35°C: Max. 5 mins. > 125°C: 30 mins. > 15 to 35°C: Max. 5 mins.) 5 cycles |
| 7. Durability (mating / un-mating) | Contact resistance: 30 mΩ or less | 500 times |
| 8. Solder heat resistance | No melting of resin parts affecting performance. | Solder bath: 260°C for 10 seconds |
| Manual solder: Soldering iron temperature of 360°C for 5 seconds |
(Note 1) This includes temperature increases caused by the flow of current.
(Note 2) The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
(Note 3) Be aware that lock deformation may occur if an excessive load is placed on the inside of the lock.
Materials and Processing
| Part Name | Materials | Finish | Note |
|---|---|---|---|
| Insulator | PBT resin | Black | UL94V-0 |
| Socket contact | Copper alloy | Selective gold plating | - |
| Pin header socket | Brass |
List of Products In This Series
Cable ID connector
HIF6-**D-1.27R(20)
Pin header right-angle type (with lock)
HIF6-**PA-1.27DS(71)
Pin header straight type (with lock)
HIF6-**PA-1.27DSA(71)
Receptacle right-angle type (with mounting holes)
HIF6B-**DA-1.27DS(71)
Receptacle right-angle type (without mounting holes)
HIF6A-**DA-1.27DS(71)
Receptacle straight type (with mounting holes)
HIF6B-**DA-1.27DSA(71)
Receptacle straight type (without mounting holes)
HIF6A-**DA-1.27DSA(71)
Pin header right-angle type (with mounting holes)
HIF6B-**PA-1.27DS(71)
Pin header right-angle type (without mounting holes)
HIF6A-**PA-1.27DS(71)
Pin header straight type (with mounting holes)
HIF6B-**PA-1.27DSA(71)
Pin header straight type (without mounting holes)
HIF6A-**PA-1.27DSA(71)
Function Diagram
| Part Number |
|---|
| HIF6A-50PA-1.27DS(71) |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable pin/contact | Number Of Pins | Connector Type | Connection direction | Product Category | Specifications |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 20.07 | 1 Piece(s) | 4 Day(s) or more | - | Male | 50 | For PCB | Angle | Pin Header | No circuit board mounting holes |
Loading...
Basic Information
| Connector Shape | Rectangular | Connector series initials | G/H/I | G/H/I | HIF |
|---|---|---|---|---|---|
| Rated Current(A) | 0.5 | Allowable Voltage(V) | AC125 | Wiring Method | Circuit Board Mounting (DIP) |
| Plating of part touching terminal | Gold | Contact Pitch(mm) | 1.27 | Operating Temperature Range(°C) | -55 to +85 |
| Terminal pitch(mm) | 2.54 |
Specification/Dimensions
-
Applicable pin/contact
- Male
- Female
-
Number Of Pins
-
Connector Type
- For PCB
- Board-to-Board
-
Connection direction
- Straight
- Angle
-
Product Category
-
Specifications
- No circuit board mounting holes
- With Lock
- With circuit board mounting holes
Days to Ship
-
- All
- 1 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Solder Spring-lock Centronics Connector (PCB Angle Male)
- D-sub connectors EMI Shielded Crimping Shell
- Solder/Machine Contact (Low Cost) D-Sub Connector
- Centronics Solder Spring-lock Connector (Female)
- Discrete Wire Connector for Connection, DF1B Series (2.5 mm Pitch)
- QX Series
- EPIC® H-B 10 TG-RO
- EPIC® H-BS 6
Customers Who Viewed This Item Also Viewed
-
HIF3B Series MIL Standard-Compliant Ribbon Cable ConnectorHIROSE ELECTRIC
Standard Price : MYR 3.61-
Days to Ship : 1 Day(s) or more
-
MIL Press-fit Female Connector (Without Lock)MISUMI
Standard Price : MYR 9.61-
Days to Ship : 1 Day(s) or more
-
Half-Pitch Multi-Function 2-Piece Connector, FX2 SeriesHIROSE ELECTRIC
Standard Price : MYR 10.10-
Days to Ship : 4 Day(s) or more
-
Flat Cable Connector (General Purpose Type) - XG4OMRON
Standard Price : MYR 2.19-
Days to Ship : 1 Day(s) or more
-
3MTM Standard Socket/Header, V Low-Profile Header, Straight Type3M
Standard Price : MYR 9.48-
Days to Ship : 3 Day(s) or more
-
2.54-mm Pitch Low Profile Connector, HIF3FB and HIF3FC SeriesHIROSE ELECTRIC
Standard Price : MYR 5.63-
Days to Ship : 3 Day(s) or more
-
MIL Press-fit Male Extension ConnectorMISUMI
Standard Price : MYR 57.09-
Days to Ship : 2 Day(s) or more
-
2.54-mm Pitch Pin Header (Single-Row Terminal Type), A2 SeriesHIROSE ELECTRIC
Standard Price : MYR 5.91-
Days to Ship : 2 Day(s) or more
-
Half Pitch Interface Connector, DX SeriesHIROSE ELECTRIC
Standard Price : MYR 28.77-
Days to Ship : 4 Day(s) or more
-
In-Line Type Ribbon Cable Connector (HIF3B Relay Type)HIROSE ELECTRIC
Standard Price : MYR 41.78-
Days to Ship : 2 Day(s) or more
-
MIL Connector PCB Straight Male Connector (BOX Model)MISUMI
Standard Price : MYR 9.04-
Days to Ship : 2 Day(s) or more
-
HIF3F Series 2.54‑mm Pitch Box Type Pin HeaderHIROSE ELECTRIC
Standard Price : MYR 8.67-
Days to Ship : 3 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy