(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
2.5‑mm Pitch Connector For Discrete Wire Connection, HNC Series (HNC2-2.5P-10DSL(02))
A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.
[Features]
・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
・Thin type: mount height when used at a right angle: 4.8 mm.
・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
・Further, there are settings available to provide a light feel even if tin plating is used.
Japanese Only
Part Number
Configured Part Number is shown.
HNC2-2.5P-10DSL(02)
2.5‑mm Pitch Connector For Discrete Wire Connections
HNC Series
Can be used with various OA equipment and banking terminals
Includes a mechanism for preventing mis-insertion and a full lock mechanism
Specifications of HNC Series 2.5‑mm Pitch Board to Cable Connector with Side Lock
Product Standards
| Rating | Rated current (Note 1) | AWG 22: 3 A AWG 24: 3 A AWG 26: 2 A AWG 28: 1 A AWG 30: 0.5 A | Operating Temperature Range | -55 to 85°C (Note 2) |
|---|---|---|---|---|
| Operating humidity range | 20 to 80% | |||
| Storage temperature range | -10 to 60°C (Note 3) | |||
| Rated voltage | 250 V AC | Storage humidity range | 40 to 70% (Note 3) |
| Item | Standard | Conditions | |
|---|---|---|---|
| 1. Insulation resistance | 1,000 MΩ or more | Measure at 500 V DC | |
| 2. Withstand voltage | There shall be no flashover or dielectric breakdown. | Energize at 1,000 V AC for 1 min. | |
| 3. Contact resistance | 10 mΩ or less | Measure at 20 mV or less, 1 mA (DC or 1,000 Hz) | |
| 4. Single unit insertion/extraction force | Insertion force: 4.4 N or less, Extraction force 0.4 N or more | Measure using a steel pin of □0.635 ±0.002 mm | |
| 5. Vibration resistance | There shall be no discontinuity for 10 μs or greater. | Frequency: 10 to 55 Hz, Single amplitude: 0.75 mm. Three directions, 10 cycles each | |
| 6. Humidity resistance | Contact resistance: 10 mΩ or less, Insulation resistance: 1,000 MΩ or more | Leave at temperature 40°C ±2°C and humidity 90 to 95% for 96 hours | |
| 7. Temperature cycle | Contact resistance: 10 mΩ or less, Insulation resistance: 1,000 MΩ or more | (-55°C: 30 mins. > 5 to 35°C: 2 to 3 mins. > 85°C: 30 mins. > 5 to 35°C: 2 to 3 mins.) 5 cycles | |
| 8. Durability (Mating / Un-mating) | Tin plating - Contact resistance: 30 mΩ or less, Gold plating - Contact resistance: 20 mΩ or less | Tin-plated: 30 times | Gold-plated: 50 times |
| 9. Solder heat resistance | No melting of resin parts affecting performance. | Flow: 250°C for 5 seconds | Manual solder: Soldering iron temperature of 300°C for 2 seconds |
(Note 1) The rated current may vary depending on the wire size used. Only the rating of the header is 3 A.
(Note 2) This includes temperature increases caused by the flow of current.
(Note 3) The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature and humidity range are applicable in a non-energized state after board mounting.
(Note 4) Information contained in this catalog represents general requirements for this product series.
Materials
| Product | Part Name | Materials | Finish | UL Standard |
|---|---|---|---|---|
| Crimp socket | Insulator | Polyamide resin | Black | UL94V-2 |
| Crimp contacts for sockets | Contacts | Phosphor bronze | Tin plating or gold plating | - |
| Pin header | Insulator | Polyamide resin | Black | UL94V-2 |
| Contacts | Brass | Tin plating or gold plating | - |
Applicable Tools
| Type | Product No. | HRS No. | Compatible Contact | |
|---|---|---|---|---|
| Applicator | AP105-HNC | 901-4502-0 | HNC-2.5S-C-A/HNC-2.5S-C-B(**) | |
| Manual crimping tools | TC-HNC-B | 250-0005-7 | HNC-2.5S-D-B(**) | |
| TC-HNC-A | 250-0006-0 | HNC-2.5S-D-A(**) | ||
| Extraction tools | Tooth thickness: 0.75 mm or less precision screwdriver | |||
Application Diagram
Application Diagram
Product Usage Precautions
Recommended soldering conditions
- Flow conditions for automatic soldering devices - Solder temperature: 250°C, Soldering time: within 5 seconds
- Manual soldering conditions - Soldering iron temperature: 300°C, Soldering time: within 2 seconds
| Part Number |
|---|
| HNC2-2.5P-10DSL(02) |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Applicable pin/contact | Number Of Pins | Connector Type | Wiring Method | Connection direction | Plating of part touching terminal | Product Category |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 8.02 | 1 Piece(s) | 3 Day(s) or more | Male | 10 | For PCB | [Other] Circuit Board Mounting (DIP) | Angle | Gold | Pin Header |
Loading...
Basic Information
| Connector Shape | Rectangular | Connector series initials | G/H/I | G/H/I | HNC |
|---|---|---|---|---|---|
| Rated Current(A) | 3 | Allowable Voltage(V) | AC250 | Contact Pitch(mm) | 2.5 |
| Operating Temperature Range(°C) | -25 to +85 | Terminal pitch(mm) | 2.5 |
Please check the type/dimensions/specifications of the part HNC2-2.5P-10DSL(02) in the 2.5‑mm Pitch Connector For Discrete Wire Connection, HNC Series series.
Specification/Dimensions
-
Applicable pin/contact
- Male
- Female
-
Number Of Pins
-
Connector Type
- Cable Connection
- For PCB
- Cable Connection
-
Wiring Method
- Crimp
- Other
-
Connection direction
- Straight
- Angle
-
Plating of part touching terminal
- Gold
- No terminal
- Tin
-
Product Category
Days to Ship
-
- All
- 3 Day(s) or Less
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| HNC1-2.5P-12DS(55) |
| HNC1-2.5S-12 |
| HNC2-2.5P-10DS(55) |
| HNC2-2.5P-15DSL(55) |
| HNC2-2.5P-2DS(02) |
| HNC2-2.5P-2DS(55) |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Applicable pin/contact | Number Of Pins | Connector Type | Wiring Method | Connection direction | Plating of part touching terminal | Product Category |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 6.76 | 1 Piece(s) | 3 Day(s) or more | Male | 12 | For PCB | [Other] Circuit Board Mounting (DIP) | Straight | Tin | Pin Header | ||
MYR 6.18 | 1 Piece(s) | 3 Day(s) or more | Female | 12 | [Cable Connection] Cable Connection | Crimp | Straight | No terminal | Socket | ||
MYR 6.27 | 1 Piece(s) | 3 Day(s) or more | Male | 10 | For PCB | [Other] Circuit Board Mounting (DIP) | Straight | Tin | Pin Header | ||
MYR 4.63 | 1 Piece(s) | 3 Day(s) or more | Male | 15 | For PCB | [Other] Circuit Board Mounting (DIP) | Angle | Tin | Pin Header | ||
MYR 6.09 | 1 Piece(s) | 3 Day(s) or more | Male | 2 | For PCB | [Other] Circuit Board Mounting (DIP) | Straight | Gold | Pin Header | ||
MYR 5.58 | 1 Piece(s) | 3 Day(s) or more | Male | 2 | For PCB | [Other] Circuit Board Mounting (DIP) | Straight | Tin | Pin Header |
Additional Products in this Category
- MIL Connectors Pressure Weld Male Connector for Relay(Basic Model)
- Size 3: Single Lock (Base Side Lever) / Base (Box)
- PCR Series
- PCR Series Case
- IL-AG5 Series
- 57 Series Soldering/DIP-Type Connector
- EPIC® H-D 40 machined
- EPIC® MCR 16
Customers Who Viewed This Item Also Viewed
-
Crimp Terminal For Socket, HNC SeriesHIROSE ELECTRIC
Standard Price : MYR 6.11-
Days to Ship : 3 Day(s) or more
-
Terminal Crimp Tool For HNC SeriesHIROSE ELECTRIC
Standard Price : MYR 2,765.02
Days to Ship : 5 Day(s) or more
-
1.25-mm Pitch Miniature Crimp Connector (UL Standard Certified Product), DF13 SeriesHIROSE ELECTRIC
Standard Price : MYR 0.83-
Days to Ship : 2 Day(s) or more
-
Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)HIROSE ELECTRIC
Standard Price : MYR 6.05-
Days to Ship : 3 Day(s) or more
-
2-mm Pitch Pin Header (Double-Row Terminal Type), A3 SeriesHIROSE ELECTRIC
Standard Price : MYR 1.37-
Days to Ship : 2 Day(s) or more
-
Discrete Wire Connector for Connection, DF3 Series (2 mm Pitch)HIROSE ELECTRIC
Standard Price : MYR 1.45-
Days to Ship : 2 Day(s) or more
-
Rectangular Miniature Multi-Pin Rack / Panel Crimp Connector, QR/P1 SeriesHIROSE ELECTRIC
Standard Price : MYR 26.18-
Days to Ship : 4 Day(s) or more
-
1 mm Pitch, 2-Row, Multi-Pin Circuit Board-to-Cable Connector, DF20 SeriesHIROSE ELECTRIC
Standard Price : MYR 2.66-
Days to Ship : 4 Day(s) or more
-
High Speed Transmission, 0.8 mm Pitch, Connector For Board-to-Board Connection, FX18 SeriesHIROSE ELECTRIC
Standard Price : MYR 21.81-
Days to Ship : 2 Day(s) or more
-
Ultra Low-profile Rectangular Interface Connector, LX SeriesHIROSE ELECTRIC
Standard Price : MYR 13.57-
Days to Ship : 2 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy