(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
3A Compatible Ribbon Cable Connector, HIF4 Series
Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors (HIF3B, etc.), offering a wider range of use.
[Features]
· Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors such as HIF3B, offering a wider range of use.
· With an automatic lock mechanism, exceptional reliability in the face of vibrational impact is ensured.
· With an automatic extraction lever with lock release, an extraction tool is not required.
· Compatible lines include the (UL2651) No. 24 AWG flat cable (7 wires/0.203 mm, external cover diameter of 1.0–1.2 mm).
Japanese Only
Part Number
Configured Part Number is shown.
3‑A Compatible Ribbon Cable Connector
HIF4 Series
Specifications of HIF4 Series 3‑A Compatible Ribbon Cable Connector
Product Standards
| Rating | Rated current: 3 A Rated voltage: 300 V AC | Operating temperature range: -55 to +85°C (Note 1) Operating humidity range: 40 to 80% | Storage temperature range -10 to +60°C (Note 2) Storage humidity range 40 to 70% (Note 2) |
|---|
| Item | Standard | Conditions |
|---|---|---|
| 1. Insulation resistance | 1,000 MΩ or more | Measure at 500 V DC |
| 2. Withstand voltage | There shall be no flashover or dielectric breakdown. | Energize at 1,000 V AC r.m.s for 1 min. |
| 3. Contact resistance | 15 mΩ or less | Measure at 0.1 A |
| 4. Vibration resistance | There shall be no electrical discontinuity for 1 μs or greater. | 10 to 55 Hz, Single amplitude: 0.75 mm, Three directions, 2 hours |
| 5. Humidity resistance | Insulation resistance: 1,000 MΩ or more | Leave at temperature 40°C ±2°C and humidity 90 to 95% for 96 hours |
| 6. Temperature cycle | There shall be no cracking or abnormalities with any of the parts. | (-65°C: 30 mins. > 15 to 35°C: Max. 5 mins. > 125°C: 30 mins. > 15 to 35°C: Max. 5 mins.) 5 cycles |
| 7. Durability (Mating / Un-mating) | Contact resistance: 15 mΩ or less | 500 times |
| 8. Solder heat resistance | No melting of resin parts affecting performance. | Solder bath: 260°C for 10 seconds |
| Manual solder: Soldering iron temperature of 360°C for 5 seconds |
(Note 1) This includes temperature increases caused by the flow of current.
(Note 2) The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
(Note 3) Information contained in this catalog represents general requirements for this product series. Contact us for the drawings and specifications for a specific part number shown.
(Note 4) Be aware that lock deformation may occur if an excessive load is placed on the inside of the lock.
Materials
| Part Name | Materials | Finish | Note | |
|---|---|---|---|---|
| Insulator | PBT resin | Black | UL94V-0 | |
| Contacts | Socket | Beryllium copper | Nickel plating + gold plating | - |
| Pin header | Phosphor bronze | Nickel plating + gold plating | ||
Product Outline Drawing And Dimensions
Socket type
Socket type dimensional drawing
Pin header right-angle type
Pin header right-angle type dimensional drawing
Pin header straight DIP type
Pin header straight DIP type dimensional drawing
PCB Dimensions
Pin header right-angle type
| Number of Contacts | A | B |
|---|---|---|
| 16 | 22.26 | 33.58 |
| 20 | 28.62 | 39.94 |
| 26 | 38.16 | 49.48 |
| 34 | 50.88 | 62.20 |
| 40 | 60.42 | 71.74 |
Pin header right-angle type PCB dimensions
Pin header straight type
| Number of Contacts | A | B |
|---|---|---|
| 16 | 22.26 | 39.98 |
| 20 | 28.62 | 46.34 |
| 26 | 38.16 | 55.88 |
| 34 | 50.88 | 68.60 |
| 40 | 60.42 | 78.14 |
Pin header straight type PCB dimensions
Type Shape
DS type
DSA type
| Part Number |
|---|
| HIF4-20D-3.18R |
| HIF4-20P-3.18DS |
| HIF4-20P-3.18DSA |
| HIF4-26D-3.18R |
| HIF4-26P-3.18DSA |
| HIF4-34D-3.18R |
| HIF4-34P-3.18DS |
| HIF4-34P-3.18DSA |
| HIF4-40D-3.18R |
| HIF4-40P-3.18DS |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable pin/contact | Number Of Pins | Connector Type | Wiring Method | Connection direction | Product Category |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 49.60 | 1 Piece(s) | 4 Day(s) or more | 10 | Female | 20 | [Cable Connection] Cable Connection | Pressure Welding | Straight | Socket | ||
MYR 27.95 | 1 Piece(s) | 4 Day(s) or more | 10 | Male | 20 | For PCB | - | Angle | Pin Header | ||
MYR 23.14 | 1 Piece(s) | 4 Day(s) or more | 10 | Male | 20 | For PCB | - | Straight | Pin Header | ||
MYR 41.57 | 1 Piece(s) | 4 Day(s) or more | - | Female | 26 | [Cable Connection] Cable Connection | Pressure Welding | Straight | Socket | ||
MYR 33.15 | 1 Piece(s) | 4 Day(s) or more | 10 | Male | 26 | For PCB | - | Straight | Pin Header | ||
MYR 51.13 | 1 Piece(s) | 4 Day(s) or more | 10 | Female | 34 | [Cable Connection] Cable Connection | Pressure Welding | Straight | Socket | ||
MYR 49.83 | 1 Piece(s) | 4 Day(s) or more | 10 | Male | 34 | For PCB | - | Angle | Pin Header | ||
MYR 56.46 | 1 Piece(s) | 4 Day(s) or more | 10 | Male | 34 | For PCB | - | Straight | Pin Header | ||
MYR 52.37 | 1 Piece(s) | 4 Day(s) or more | 10 | Female | 40 | [Cable Connection] Cable Connection | Pressure Welding | Straight | Socket | ||
MYR 39.72 | 1 Piece(s) | 4 Day(s) or more | - | Male | 40 | For PCB | - | Angle | Pin Header |
Loading...
Basic Information
| Connector Shape | Rectangular | Connector series initials | G/H/I | G/H/I | HIF |
|---|---|---|---|---|---|
| Rated Current(A) | 3 | Allowable Voltage(V) | AC300 | Plating of part touching terminal | Nickel + partial gold |
| Contact Pitch(mm) | 3.18 | Operating Temperature Range(°C) | -55 to +85 |
Specification/Dimensions
-
Applicable pin/contact
- Male
- Female
-
Number Of Pins
-
Connector Type
- Cable Connection
- For PCB
- Cable Connection
-
Wiring Method
- Pressure Welding
-
Connection direction
- Straight
- Angle
-
Product Category
Days to Ship
-
- All
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Misumi, Waterproof, E-Model Connector (Screw Wire Connection)
- Misumi, Waterproof, Single-Lever Hood (Straight)
- CENTRONICS Connectors Angle Solder Screw Lock Male Connector for Circuit Board
- Heavy Duty Waterproof Connectors ⋅ Han Series, Han EEE Type Connector (Pressure Weld Wiring)
- MR Male Connector
- Size 4: Double Lock (Base Side Lever) / Hood
- Small, Rectangular Interface Connector, 3200 Series
- AMP POWER DBL LOCK CAP HOUSING
Customers Who Viewed This Item Also Viewed
-
Folding-Screen Style OKIFLEX for 3 AOKI ELECTRIC CABLE
Standard Price : MYR 676.75-
Days to Ship : 7 Day(s) or more
-
HIF3F Series 2.54‑mm Pitch Box Type Pin HeaderHIROSE ELECTRIC
Standard Price : MYR 8.67-
Days to Ship : 3 Day(s) or more
-
In-Line Type Ribbon Cable Connector (HIF3B Relay Type)HIROSE ELECTRIC
Standard Price : MYR 41.78-
Days to Ship : 2 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy