(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
HR10 Series Miniature Circular Connector【1-100 Pieces Per Package】 (HR10A-13J-20SC(73))
Small-diameter circular connectors, with the smallest size being close to the thickness of a cigarette. For use with camera interfaces.
[Features]
· Single-action, push-pull lock mechanism enables quick insertion and removal.
· Simply push when inserting to securely lock.
· Five key ensures insertion only to the intended location even when inserting by feel.
· Contacts are arranged in a safe configuration that prevents the contact pins from being damaged when aligning the five key by feel.
· Push-pull lock means little space is necessary for insertion and removal, making it possible to mount multiple connectors in close proximity to each other.
· No small screwdrivers are required for connector disassembly or assembly, meaning wiring and mounting can be performed easily using a JIS wrench.
· With a simple and neat external appearance and a satin finish on the top surface, the connectors will not stand out.
· Compact, high density, high reliability and simple design.
· Extremely simple insertion and removal.
[Applications]
· Convenient for a wide range of equipment due to its small size, light weight, and excellent operability.
Japanese Only
Part Number
Configured Part Number is shown.
HR10A-13J-20SC(73)
High-Performance Circular Connector for Camera Interfaces
Can be used with a wide range of equipment thanks to its small size, light weight, and excellent operability.
Specifications of HR10 Series Miniature Circular Connectors
Product Standards
| Rating | Shell Size | Number of Contacts | Rated Current |
|---|---|---|---|
| 7 | 4 5 6 | 2 A | |
| 10 | 10 12 | 2 A | |
| 13 | 20 | 2 A |
| Rating | Shell Size | Number of Contacts | Rated voltage |
|---|---|---|---|
| 7 | 4 5 6 | 150 V AC, 200 V DC 100 V AC, 140 V DC 100 V AC, 140 V DC | |
| 10 | 10 12 | 100 V AC, 140 V DC | |
| 13 | 20 | 100 V AC, 140 V DC |
| Rating | Operating Temperature Range | -25 to 85°C |
|---|---|---|
| Storage temperature range | -10 to 60°C |
| Item | Standard | Conditions |
|---|---|---|
| 1. Contact resistance | 10 mΩ or less | Measure at 1 A DC |
| 2. Insulation resistance: | 1,000 MΩ or more | Measure at 100 V DC |
| 3. Withstand voltage | There shall be no flashover or dielectric breakdown | 300 V AC for 1 min., 4-pin: 500 V AC for 1 min. |
| 4. Vibration resistance | There shall be no electrical discontinuity for 10 μs or greater | Test at 10 to 55 Hz/cycle, Single amplitude: 0.75 mm Three directions, 2 hours each. |
| 5. Shock | There shall be no electrical discontinuity for 10 μs or greater | Test at acceleration 490 m/s2, duration: 11 ms, 3 directions, 3 times each. |
| 6. Mating cycle | Contact resistance 15 mΩ or less | 1,000 times |
| 7. Temperature cycle | Insulation resistance 1,000 MΩ or more | Leave at -55°C: 30 mins. > Room temperature: 10 to 15 mins. > 85°C: 30 mins.>Room temperature: 10 to 15 mins. Total of 5 cycles. |
| 8. Humidity resistance | Insulation resistance: 5 MΩ or more (at high humidity), 50 MΩ or more (when dry) | Temperature: 40°C, relative humidity: 90 to 95%, left for 96 hours. |
Materials/Processing
| Item | Materials | Finish | Notes |
|---|---|---|---|
| Exterior | Zinc alloy, brass | Matte-finished nickel plating | ― |
| Insulator | Polyamide resin, PBT resin | ― | Blue, black |
| Contacts | Copper alloy | HR10: gold plating HR10A: silver plating | ― |
| Product Name | Materials | Finish |
|---|---|---|
| Plug shell | Brass | Gold plating |
| Jack shell | Brass | |
| Insulator | Tetrafluoride resin | |
| Male contact | Phosphor bronze | Gold plating |
| Female contacts | Beryllium copper |
Coaxial Contact Materials/Processing
| Item | Standard Value |
|---|---|
| Impedance | 50 Ω |
| Insulation resistance | 1,000 MΩ or more at 250 V DC |
| Contact resistance | Center 6.5 mΩ or less, Exterior 4 mΩ or less at 1 A DC |
| Withstand Voltage | At 250 V AC (r.m.s) for 1 min. |
| Voltage standing wave ratio | 0 to 1,000 MHz, 1.3 or less |
| Pull force (extraction force) | 4.9 N (500 gf) or more |
Coaxial contact performance
Connector Combination Diagram
(Notes)
- 1. When using a plug with male terminal, be sure to use a receptacle or jack fitted with female terminal.
- 2. The standard finish of the terminal is gold plating for the HR10, and silver plating for the HR10A and HR10G. Be sure to use male and female connectors of the same plating.
Product Usage
Connector Handling
Wiring procedure (plug side)
- *This applies also to the jack side assembly procedure.
- *No special procedure is given here for the receptacle side because no special procedure is necessary.
| HR10 Type | HR10A Type | |
|---|---|---|
| 1 | Use cables with a nominal sectional area of 0.129 mm2 (26 AWG) or less at the finished outer diameters applicable for each size. | |
| 2 | After processing the cable ends according to the dimensions in the above drawings, fit the parts to the cable as shown in the drawings. | |
| Fit the parts to the cable in the following order: tightener, clamp washer and plug body. | Fit the parts to the cable in the following order: tightener, cord bushing and plug body. | |
| 3 | (Solder type) Insert the P shell unit into the assembly tool stand and solder it. (Crimp type) After crimping the appropriate crimp terminal to the cable core, insert the crimp terminal into the terminal hole in the P shell unit. | |
| 4 | Assemble the connector in the following order. | |
| (1) Screw the plug body into the thread in the P shell unit with the tightening force shown in Table 1 using a torque wrench with a fixed torque. Before tightening the plug body, slacken part C so that no load is applied to the soldered wires. (2) Apply the clamp washer to the bifurcated part of the plug body, and then tighten the tightener until surface B touches the plug body surface A. (Note) In order to prevent loosening, apply a screw-locking adhesive at the threaded section. | (1) Fix by crimping the clamp accompanying the cable with the cable crimping tool (HR10A-TC-02). (2) Screw the plug body into the thread in the P shell unit with the tightening force shown in Table 1 using a torque wrench with a fixed torque. Before tightening the plug body, slacken part D so that no load is applied to the soldered wires. (3) Tighten the set screw so that the tip of the screw presses one of the 2 bosses on the clamp. Fix the set screw with a tightening torque of 0.3 N·m (3 kgf/cm.) (4) Attach the cord bushing to the plug body. (Note) In order to prevent loosening, apply a screw-locking adhesive at the threaded section. | |
| 5 | This completes the work. | |
Wiring procedure (plug side) work steps
Product Usage Precautions
- 1. Make sure the power is off before mating or un-mating the connector.
- 2. Use connectors with socket (female) contacts at the power side of the circuit.
- 3. Make sure that the coupling is in the completely locked position.
- 4. Cable clamping, cable rotation, and other forces may vary with the cable construction. Make sure that your cable is suitable for use with these connectors before usage and production.
| Part Number |
|---|
| HR10A-13J-20SC(73) |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable pin/contact | Number Of Pins | Connector Type | Wiring Method | Connection direction | Protection function (environmentally resistant) | Shell Size | Plating of part touching terminal | Product Category | Specifications | Dimensions (vertical × horizontal × depth) (mm) | Operating Temperature Range (°C) | Mating partner 1 | Mating partner 2 | Mating partner 3 | Mating partner 4 | Mating partner 5 | Mating partner 6 | Mating partner 7 | Mating partner 8 | Mating partner 9 | Mating partner 10 | Mating partner 11 | Mating partner 12 | Mating partner 13 | Mating partner 14 | Mating partner 15 | Mating partner 16 | Mating partner 26 | Mating partner 27 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 202.08 | 1 Piece(s) | 4 Day(s) or more | 10 | Female | 20 | Cable Connection | Crimp | Straight | NA | 13 | Silver | Jack | Low Cost | φ 18 × 58.5 | -25 to +85 | HR10A-13P-20P(73) | HR10A-13P-20PC(73) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Basic Information
| Connector Shape | Round shape | Connector series initials | G/H/I | G/H/I | HR10 |
|---|---|---|---|---|---|
| Rated Current(A) | 2 | Features | NA |
Please check the type/dimensions/specifications of the part HR10A-13J-20SC(73) in the HR10 Series Miniature Circular Connector series.
Specification/Dimensions
-
Applicable pin/contact
- Male
- Female
-
Number Of Pins
-
Connector Type
- Cable Connection
- For PCB
- Panel Mount
-
Wiring Method
- Solder
- Crimp
-
Connection direction
- Straight
-
Protection function (environmentally resistant)
- Available
- NA
- Available
-
Shell Size
-
Plating of part touching terminal
- Gold
- Silver
-
Product Category
- Jack
- Plug
- Receptacle
- Terminal
-
Specifications
- Loose terminal
- Low Cost
- Screw coupling
- Series terminal
- Shield Type
- Standard
-
Dimensions (vertical × horizontal × depth)(mm)
- 1.15 x 1.2 x 10
- φ 11 × 12
- φ 11 × 12.2
- φ 11 × 14
- φ 11 × 15.5
- φ 11 × 15.6
- φ 11 × 28.5
- φ 11 × 35.3
- φ 11.5 × 35
- φ 12 × 35
- φ 14 × 12
- φ 14 × 12.2
- φ 14 × 14
- φ 14 × 15.5
- φ 14 × 15.6
- φ 14 × 16
- φ 14 × 32.5
- φ 14 × 43.5
- φ 14 × 46.5
- φ 14.7 × 41.3
- φ 14.7 × 43
- φ 15 x 45.8
- φ 17 x 43
- φ 18 × 15
- φ 18 × 17.8
- φ 18 × 19.2
- φ 18 × 20.2
- φ 18 × 58.5
- φ 19 × 59
- φ 20 × 56.5
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 9 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| HR10-10R-12P(73) |
| HR10-10R-12PA(73) |
| HR10-10R-12S(73) |
| HR10A-13P-20P(73) |
| HR10A-13P-20PC(73) |
| HR10A-13P-20S(73) |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable pin/contact | Number Of Pins | Connector Type | Wiring Method | Connection direction | Protection function (environmentally resistant) | Shell Size | Plating of part touching terminal | Product Category | Specifications | Dimensions (vertical × horizontal × depth) (mm) | Operating Temperature Range (°C) | Mating partner 1 | Mating partner 2 | Mating partner 3 | Mating partner 4 | Mating partner 5 | Mating partner 6 | Mating partner 7 | Mating partner 8 | Mating partner 9 | Mating partner 10 | Mating partner 11 | Mating partner 12 | Mating partner 13 | Mating partner 14 | Mating partner 15 | Mating partner 16 | Mating partner 26 | Mating partner 27 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 59.52 | 1 Piece(s) | 5 Day(s) or more | - | Male | 12 | Panel Mount | Solder | Straight | NA | 10 | Gold | Receptacle | Standard | φ 14 × 16 | -25 to +85 | HR10-10P-12S(73) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
MYR 75.14 | 1 Piece(s) | 4 Day(s) or more | 10 | Male | 12 | For PCB | Solder | Straight | NA | 10 | Gold | Receptacle | Standard | φ 14 × 15.5 | -25 to +85 | HR10-10P-12S(73) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
MYR 77.61 | 1 Piece(s) | 5 Day(s) or more | - | Female | 12 | Panel Mount | Solder | Straight | NA | 10 | Gold | Receptacle | Standard | φ 14 × 16 | -25 to +85 | HR10-10P-12P(73) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
MYR 175.86 | 1 Piece(s) | 5 Day(s) or more | - | Male | 20 | Cable Connection | Solder | Straight | NA | 13 | Silver | Plug | Low Cost | φ 19 × 59 | -25 to +85 | HR10A-13R-20S(73) | HR10A-13R-20SB(73) | HR10A-13R-20SC(73) | HR10G-13R-20SB(73) | HR10G-13R-20SC(73) | HR10A-13J-20SC(73) | - | - | - | - | - | - | - | - | - | - | - | - | ||
MYR 205.80 | 1 Piece(s) | 4 Day(s) or more | 10 | Male | 20 | Cable Connection | Crimp | Straight | NA | 13 | Silver | Plug | Low Cost | φ 19 × 59 | -25 to +85 | HR10A-13R-20S(73) | HR10A-13R-20SB(73) | HR10A-13R-20SC(73) | HR10G-13R-20SB(73) | HR10G-13R-20SC(73) | HR10A-13J-20SC(73) | - | - | - | - | - | - | - | - | - | - | - | - | ||
MYR 295.99 | 1 Piece(s) | 4 Day(s) or more | - | Female | 20 | Cable Connection | Solder | Straight | NA | 13 | Silver | Plug | Low Cost | φ 19 × 59 | -25 to +85 | HR10A-13R-20P(73) | HR10A-13R-20PB(73) | HR10A-13R-20PC(73) | HR10G-13R-20PB(73) | HR10G-13R-20PC(73) | HR10A-13J-20PC(73) | - | - | - | - | - | - | - | - | - | - | - | - |
Additional Products in this Category
- Environment-resistant Connector (LEB Series: Heat and Vacuum Resistant) Straight Plug
- CE05/JL04V European Standard/Waterproof Straight Plug (Screw)
- R04 Waterproof Flange Panel Mount Receptacle (Screw Model)
- M12 Female (Soket), D Cord Connector
- 710 Series
- Mini-XL Series Plug (Metal Cap)
- Mini-XL Series Plug (Large Cap)
- EPIC® SIGNAL M23 D6
Customers Who Viewed This Item Also Viewed
-
HR10 Straight Plug (One-touch Lock)MISUMI
Standard Price : MYR 53.44-
Days to Ship : 2 Day(s) or more
-
-
D-Sub, D02, D02-M15 SeriesJAPANAVIATION
Standard Price : MYR 13.13-
Days to Ship : 2 Day(s) or more
-
Ramicon RM Series Multi-Contact Compact Circular ConnectorHIROSE ELECTRIC
Standard Price : MYR 1.45-
Days to Ship : 3 Day(s) or more
-
HR10 Panel Mount Receptacle (One-touch Lock)MISUMI
Standard Price : MYR 29.02-
Days to Ship : 2 Day(s) or more
-
HIF3B Series MIL Standard-Compliant Ribbon Cable ConnectorHIROSE ELECTRIC
Standard Price : MYR 3.61-
Days to Ship : 1 Day(s) or more
-
-
-
D-Sub Connector (Solder Termination Type), HD SeriesHIROSE ELECTRIC
Standard Price : MYR 16.46-
Days to Ship : 2 Day(s) or more
-
Microminiature Circular Connectors, HR25/HR25A SeriesHIROSE ELECTRIC
Standard Price : MYR 5.46-
Days to Ship : 3 Day(s) or more
-
Solder/Press Contact (Low Cost) D-Sub ConnectorMISUMI
Standard Price : MYR 4.90-
Days to Ship : 1 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy