(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Push Button Switch (Round Body Shape φ30), ZAP (ZAP-2G)
[Features]
· Features type-Z microswitches for a long lifespan.
· Microswitches allow for direct switching even under heavy loads.
· A cushioning mechanism in the operational section protects the switch.
· The push button is drip-proof, allowing it to be used in areas with oil, water, or dust in the air.
· 3 types of operational forms and 6 colors.
Japanese Only
Part Number
Configured Part Number is shown.
ZAP-2G
Push Button Switch Round Body Type ø30 (30 mm Diameter) ZAP Specifications
ZAP external appearance
Type ZAP-□ actuator dimensional diagram
Type 2ZAP-□ actuator dimensional diagram
Type ZAP-□ Type 2ZAP dimensional diagram
*chrome plated
Type ZAP-1□ Type 2ZAP-1□ dimensional diagram
*chrome plated
Type ZAP-2□ Type 2ZAP-2□ dimensional diagram
*chrome plated
Panel cutting dimensions
Shared items / unit: mm
Note. Tolerance for unspecified components are ±0.8 mm.
ZAP Types
| Classification | Number Of Outputs | Operating Part Color | ||
|---|---|---|---|---|
| Blue (-A) | Black (-B) | Green (-G) | ||
| Momentary Action | 1 | Type ZAP-A | Type ZAP-B | Type ZAP-G |
| 2 | - | Type 2ZAP-B | Type 2ZAP-G | |
| 1 | - | Type ZAP-1B | Type ZAP-1G | |
| 2 | Type 2ZAP-1A | - | - | |
| 1 | - | Type ZAP-2B | Type ZAP-2G | |
| Classification | Number Of Outputs | Operating Part Color | ||
|---|---|---|---|---|
| Red (-R) | White (-W) | Yellow (-Y) | ||
| Momentary Action | 1 | Type ZAP-R | Type ZAP-W | Type ZAP-Y |
| 2 | Type 2ZAP-R | - | - | |
| 1 | Type ZAP-2R | - | - | |
| 2 | Type 2ZAP-2R | - | - | |
Note. Specialty products are prepared for cases in high-humidity conditions or outdoor use.
Please contact our support center for details.
ZAP Rated Value
| Built-in Switch | Rated Voltage (V) | Non-inductive Load (A) | Inductive Load (A) | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Resistive Load | Lamp Load | Inductive Load | Electric Motor Load | ||||||
| Normally Closed Circuit | Normally Open Circuit | Normally Closed Circuit | Normally Open Circuit | Normally Closed Circuit | Normally Open Circuit | Normally Closed Circuit | Normally Open Circuit | ||
| Type Z-15G5-B | 125 V AC | 15 | 3 | 1.5 | 15 | 5 | 2.5 | ||
| 200 V AC | 15 | 2.5 | 1.25 | 15 | 3 | 1.5 | |||
| 500 V AC | 10 | 1.5 | 0.75 | 6 | 1.5 | 0.75 | |||
| DC 8 | 15 | 3 | 1.5 | 15 | 5 | 2.5 | |||
| DC 14 | 15 | 3 | 1.5 | 10 | 5 | 2.5 | |||
| DC 30 | 6 | 3 | 1.5 | 5 | 5 | 2.5 | |||
| DC 125 | 0.5 | 0.5 | 0.5 | 0.05 | 0.05 | 0.05 | |||
| DC 250 | 0.25 | 0.25 | 0.25 | 0.03 | 0.03 | 0.03 | |||
Note 1. The above values show regular current.
Note 2. Inductive load will have a power factor of 0.4 or higher (AC), and a time constant of 7 ms or less (DC).
Note 3. Lamp load has a 10x inrush current.
Note 4. Electric motor loads have a 6x inrush current.
Note 5. The rated values described above were tested at the conditions below based on JIS C4505.
- 1. Ambient temperature: 20 ±2℃
- 2. Ambient humidity: 65 ±5% RH
- 3. Operating frequency: 20 times/min.
ZAP Performance
| Permitted Operation Frequency | Mechanical | 60 times/min. |
|---|---|---|
| Electrical | 20 times/min. | |
| Insulation Resistance | 100 MΩ or higher (with 500 V DC megger) | |
| Contact Resistance | 30 mΩ or less (initial value) | |
| Withstand Voltage | Between Same Pole Terminals | 1,000 V AC 50/60 Hz 1 min. |
| Between Charging Metal And Ground, Between Each Terminal And Non-Charging Metal | 2,000 V AC 50/60 Hz 1 min | |
| Vibration | Malfunction | 10 to 55 Hz double amplitude 1.5 mm (within 1 ms) |
| Shock | Durability | Max. 500 m/s2 |
| Malfunction | Max. 200 m/s2 (within 1 ms) | |
| Durability | Mechanical | 1,000,000 times or more |
| Electrical | 500,000 times or more | |
| Mass | Approx. 130 to 210 g | |
| Inrush Current | Normally Closed Circuit | Max. 30 A |
| Normally Open Circuit | Max. 15 A | |
| Ambient Operating Temperature | -25℃ to +80°C (with no icing and no condensation) | |
| Operating Ambient Humidity | 35 to 85% RH | |
| Storage Ambient Temperature | -25℃ to +80°C (with no icing and no condensation) | |
| Protective Structure | Corresponds to IP65 (push button component only) | |
| Class Of Electric Shock Protection | Class II | |
| PTI (Tracking Properties) | 175 | |
| Degree Of Pollution | 3 (IEC947-5-1) | |
ZAP Operating Properties
| Operating Properties | Type ZAP-□□ | Type 2ZAP-□□ |
|---|---|---|
| Force Required For Operation OF | 5.88 to 14.71 N | 9.81 to 17.70 N |
Note. OF will change depending on the thickness of the installation panel.
ZAP Contact Type
| Name | Contact Type | |
|---|---|---|
| Double-Throw (C Contact) | COM | NC |
| NO | ||
ZAP Safety Standards
The built-in switch model Z-15G5-B is certified by UL and CSA.
- *Please see the catalog for product information not listed above.
| Part Number |
|---|
| ZAP-2G |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Color of Operating Unit | Operating part dimensions - horizontal (mm) | Operating part dimensions - vertical (mm) | Number of Outputs |
|---|---|---|---|---|---|---|---|---|---|
MYR 62.18 | 1 Piece(s) | 2 Day(s) | - | Green | 40 | 40 | 1 |
Loading...
Basic Information
| Mounting Hole | Ø30.5 | Operating part shape | Round | Type | Non-illumination type push-button |
|---|---|---|---|---|---|
| Operating function | Momentary | Contact Configuration | 1c | Terminal shape | Screw terminal |
| Guard included | NA | Panel depth dimensions(mm) | 21.5 | Protection function | Available |
| Protection function details | IP65 equivalent | Switch rating, AC resistance load 1 | AC125V/15A | Switch rating, AC resistance load 2 | AC500V/10A |
| Switch rating, DC resistance load 1 | DC8V/15A | Switch rating, DC resistance load 2 | DC250V/0.25A |
Please check the type/dimensions/specifications of the part ZAP-2G in the Push Button Switch (Round Body Shape φ30), ZAP series.
Specification/Dimensions
-
Color of Operating Unit
- Red
- Green
- Black
-
Operating part dimensions - horizontal(mm)
-
Operating part dimensions - vertical(mm)
-
Number of Outputs
- 1
- 2
Days to Ship
-
- All
- 2 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 43 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| 2ZAP-2R |
| 2ZAP-B |
| ZAP-2R |
| ZAP-B |
| ZAP-G |
| ZAP-R |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Color of Operating Unit | Operating part dimensions - horizontal (mm) | Operating part dimensions - vertical (mm) | Number of Outputs |
|---|---|---|---|---|---|---|---|---|---|
MYR 101.69 | 1 Piece(s) | 43 Day(s) or more | 10 | Red | 40 | 40 | 2 | ||
MYR 101.69 | 1 Piece(s) | 6 Day(s) or more | 10 | Black | 36 | 36 | 2 | ||
MYR 62.18 | 1 Piece(s) | 5 Day(s) or more | - | Red | 40 | 40 | 1 | ||
MYR 60.89 | 1 Piece(s) | 5 Day(s) or more | - | Black | 36 | 36 | 1 | ||
MYR 62.18 | 1 Piece(s) | 2 Day(s) | - | Green | 36 | 36 | 1 | ||
MYR 62.18 | 1 Piece(s) | 5 Day(s) or more | - | Red | 36 | 36 | 1 |
Additional Products in this Category
- Illuminated Pushbutton Switch Mounting Hole φ16
- ø22 TW Series Control Unit
- MC Series Small Control Unit
- ø10 A1 Series, Small Control Unit
- ø12 A2 Series, Small Control Unit
- ø30 Zinc Diecast Series, Control Unit
- Enable Switch A4E
- φ22 mm Pushbutton Switch (Illumination Type) A22NL Series
Customers Who Viewed This Item Also Viewed
-
-
Key Type Selector Switch A22K, Optional PartOMRON
Standard Price : MYR 13.73-
Days to Ship : 2 Day(s) or more
-
Illumination Push Button Switch (Round Body φ8) A3D, Optional PartOMRON
Standard Price : MYR 14.43-
Days to Ship : 5 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy