(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information. 
  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

Small Digital Panel Meter K3GN (K3GN-NDC-FLK DC24V)

Small Digital Panel Meter K3GN K3GN-NDC-FLK DC24V

[Features]
· A small digital panel meter with a small size of 48 (W) × 24 (H) × 83 (D) mm, suitable for smaller sized equipment control panels.
· Supports DC voltage/current and rotation pulse multi input.
· Switchable 2-color display of green/red.
· Output type is freely selectable.
· CE marking compliant.
· Certified under UL/CSA standards.
· Waterproof structure compliant with NEMA4X (IP66 equivalent).

PDF

Japanese Only

Part Number

Configured Part Number is shown.

K3GN-NDC-FLK DC24V

Small Digital Panel Meter Specifications

Small Digital Panel Meter K3GN: related image

K3GN external appearance

Small Digital Panel Meter K3GN: related image

K3GN dimensional outline drawing

Small Digital Panel Meter K3GN: related image

Panel machining dimensions

 

Mounting panel thickness: 1 to 5 mm.
Mount horizontally.
Handy type hydraulic puncher HP-2, dedicated replacement blade (HP-22.2-45K)

  • *For installation, insert the K3GN panel into the rectangular hole, insert the adapter from the rear, and push it in to reduce the gap between the panel surface and the adapter. Secure the unit with screws.
  • *For water-proof installation, insert the water-proof packing onto the body of the K3GN.
  • *When mounting multiple units, make sure that the ambient temperature does not exceed specifications for this unit.

Rating

FormatSeries K3GN-ND
DC Voltage / Current /
NPN Input Type
Series K3GN-PD
DC Voltage / Current /
PNP Input Type
Series K3GN-NL
Micro Voltage / NPN Input Type
Power Supply Voltage24 V DC
Allowable Power Supply Voltage Range85 to 110% of power supply voltage
Power Consumption
(At Maximum Load)*
2.5 W or less (at DC maximum load: when all LEDs are ON)
Input SignalDC voltage / current / non-voltage contact / open collector
DC Voltage /
Current Input
A/D Conversion
Method
Double Integral Method
Pulse
Signal Input
Pulse Measurement
Method
Periodic Measurement Method
External Power SupplyNA
Event InputCurrent value hold or forced zero (select as desired)
*Effective for DC voltage / DC input only. (Control Signal Minimum Input Time 80 ms)
Output
(Differs Based On Model)
Relay Contact Output30 V DC 1 A (resistive load), mechanical life: 50 million operations or more, electrical life: 100,000 operations or more
Transistor OutputMaximum load voltage: 24 V DC, maximum load current: 50 mA, leak voltage: 100 μA or less
Communication OutputRS-485 (2 Wire Half Duplex)
Linear OutputDC current (DC 0 to 20 mA / DC 4 to 20 mA: load 500 Ω or less, resolution approx. 10,000)
DC voltage (0 to 5 V DC / 1 to 5 V DC / 0 to 10 V DC: load 5 kΩ or more, resolution approx. 10,000)
-DC current (DC 0 to 20 mA / DC 4 to 20 mA: load 500 Ω or less, resolution approx. 10,000)
DC voltage (0 to 5 V DC / 1 to 5 V DC / 0 to 10 V DC: load 5 kΩ or more, resolution approx. 10,000)
Display MethodNegative LCD (backlight LED) display, 7-segment digital display (character height PV: 7 mm) and single illuminated display
Main FunctionsScaling, pre-scaling, teaching, averaging processing, forced zero, display color switching, output type selection, key protect, start-up compensation timer, hysteresis
Operating Temperature
Range
When In Use-10 to +55°C (No Freezing Or Condensation)
When Stored-25 to +65℃ (No Freezing Or Condensation)
Operating Humidity
Range
When In Use25 to 85% RH
Height2,000 m or less
AccessoriesRubber packing, fixture, instruction manual
  • *A rated or higher control power supply capacity is required when powering ON. Be especially careful when using multiple units.
  • *When turning ON the power, all indicators will be illuminated and will display the initial value, and all outputs will be in the OFF state.
  • *When the start-up compensation timer is operating, the value "00000" indicating the unmeasured state is displayed and all outputs are in the OFF state.
  • *Refer to the catalog for performance, input range, measurement range, measurement accuracy, and other functions.
Part Number
K3GN-NDC-FLK DC24V
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSInput Type Output Type Number of Outputs Communication Type

MYR 1,478.87

1 Piece(s) 9 Day(s) or more -DC voltage/current/NPNRelay contact output (1a)2RS-485

Loading...

  1. 1
 

Basic Information

Mounting Method Panel Mount Panel cut dimensions 45x22.2 Standard CE / UL / CSA
Dimension length(mm) 35 Dimension width(mm) 48 Dimension thickness(mm) 80
Power Supply Voltage(V) DC24 Calculation function Scaling/pre-scale Display Digits 5 digits
Sampling cycle 250ms Protective structure (front) NEMA4X (corresponding to IP66)

Please check the type/dimensions/specifications of the part K3GN-NDC-FLK DC24V in the Small Digital Panel Meter K3GN series.

Products like this...

Part Number
K3GN-NDC DC24V
K3GN-NDC-L1 DC24V
K3GN-NDT1 DC24V
K3GN-NDT1-FLK DC24V
K3GN-NLC DC24V
K3GN-PDC DC24V
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSInput Type Output Type Number of Outputs Communication Type

MYR 1,092.05

1 Piece(s) 5 Day(s) or more -DC voltage/current/NPNRelay contact output (1a)2NA

MYR 1,478.87

1 Piece(s) 9 Day(s) or more -DC voltage/current/NPNDC current/relay contact output (1a)2NA

MYR 1,092.05

1 Piece(s) 5 Day(s) or more -DC voltage/current/NPNTransistor output (NPN)3NA

MYR 1,478.87

1 Piece(s) 9 Day(s) or more -DC voltage/current/NPNTransistor output (NPN)3RS-485

MYR 1,401.48

1 Piece(s) 9 Day(s) or more -Micro DC voltage/NPNRelay contact output (1a)2NA

MYR 1,092.05

1 Piece(s) 9 Day(s) or more -DC voltage/current/PNPRelay contact output (1a)2NA

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)