(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Dip Timer H3FA
Dip timer H3FA
[Features]
· A timer for use on a PCB of contact / non-contact output type.
· Two types are provided for control output, with the contact output (1a, 1b) it is 3A (AC250V low resistance load), with the non-contact output there is a maximum of 150mA and high capacity.
· 1 sec./10 sec./1 min./10 min. (type A), 6 sec./60 sec./6 min./60 min. (type B) with four time types in one apparatus offering multiple functions.
· The time can be operated remotely by the connection to an external varistor.
· Completely washable.
· A small scale size enabling installation in a one-inch-pitch rack (length × width × height: 17.75 × 36.9 × 19.5 mm).
· UL/CSA acquired.
Japanese Only
Part Number
Configured Part Number is shown.
DIP Timer Specifications
H3FA external appearance
H3FA outline drawing
Time Specifications
| Format | Maximum Scale Time | Set Time Range |
|---|---|---|
| Series H3FA-A Series H3FA-SA Series H3FA-AU | 1 s | 0.1 to 1 s |
| 10 s | 1 to 10 s | |
| 1 min | 0.1 to 1 min | |
| Series H3FA-B Series H3FA-SB Series H3FA-BU | 6 s | 0.6 to 6 s |
| 60 s | 6 to 60 s | |
| 6 min | 0.6 to 6 min |
Note 1. The above timing ranges apply when the internal variable resistor of Series H3FA is used.
Note 2. The external variable resistor may also be used by opening the terminal connected to the internal variable resistor.
Note 3. Wire the appropriate terminal to select a time setting range.
Performance
| Variations In Operating Time | ±0.5% or less (percentage relative to maximum scale time) *1 *3 | |
|---|---|---|
| Set Error | 0 to +30% or less (percentage relative to maximum scale time, at 20°C, at rated voltage) | |
| Recovery Time | 10 ms or less | |
| Voltage Effect | ±1% or less (Percentage relative to maximum scale time. However, it is ±2% or less for 5, 6, 5/6 V DC.) | |
| Temperature Effect | ±5% or less (percentage relative to maximum scale time) *1 | |
| Insulation Resistance | 100 MΩ or more (at 500 V DC megger) | |
| Withstand Voltage | 1,500 V AC, 50/60 Hz, 1 min (between control output and operation circuit) *2 1,000 V AC, 50/60 Hz, 1 min (between non-continuous contacts) *2 | |
| Vibration | Endurance | 10 to 55 Hz, half amplitude 0.375mm, 3 directions, 2 h each |
| Malfunction | 10 to 55 Hz, half amplitude 0.25mm, 3 directions, 10 min each | |
| Shock | Endurance | 1,000 m/s2, 3 axes, 6 directions, 3 times each |
| Malfunction | 100 m/s2, 3 axes, 6 directions, 3 times each | |
| Life | Mechanical | 10 million operations or more (no load, switching frequency 1,800 operations/h) *2 |
| Electrical | 100,000 operations or more (250 V AC, 3 A, resistive load, switching frequency 1,800 operations/h) *2 | |
| Mass | Contact output type approx. 15 g, non-contact output type approx. 10 g | |
* 2. Applies to the contact point type.
* 3. When using the internal variable resistor of Series H3FA. (Not including when an externally connected resistor is used.)
| Part Number |
|---|
| H3FA-A DC5 |
| H3FA-A DC12 |
| H3FA-A DC24 |
| H3FA-AU DC12 |
| H3FA-AU DC24 |
| H3FA-B DC5 |
| H3FA-B DC12 |
| H3FA-B DC24 |
| H3FA-BU DC24 |
| H3FA-SA DC12/24 |
| H3FA-SB DC12/24 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Time specifications (s) | Output Method | Rated power supply voltage (V) | Contact Configuration |
|---|---|---|---|---|---|---|---|---|
MYR 136.98 | 1 Piece(s) | 5 Day(s) or more | 1 s – 10 min | Relay | 5 | Includes contact output (1a, 1b) | ||
MYR 133.48 | 1 Piece(s) | 5 Day(s) or more | 1 s – 10 min | Relay | 12 | Includes contact output (1a, 1b) | ||
MYR 133.57 | 1 Piece(s) | 2 Day(s) | 1 s – 10 min | Relay | 24 | Includes contact output (1a, 1b) | ||
MYR 151.29 | 1 Piece(s) | 5 Day(s) or more | 1 s – 10 min | Relay | 12 | Includes contact output (1a, 1b) | ||
MYR 151.29 | 1 Piece(s) | 5 Day(s) or more | 1 s – 10 min | Relay | 24 | Includes contact output (1a, 1b) | ||
MYR 136.98 | 1 Piece(s) | 5 Day(s) or more | 6 s – 60 min | Relay | 5 | Includes contact output (1a, 1b) | ||
MYR 133.48 | 1 Piece(s) | 5 Day(s) or more | 6 s – 60 min | Relay | 12 | Includes contact output (1a, 1b) | ||
MYR 133.48 | 1 Piece(s) | 5 Day(s) or more | 6 s – 60 min | Relay | 24 | Includes contact output (1a, 1b) | ||
MYR 154.79 | 1 Piece(s) | 5 Day(s) or more | 6 s – 60 min | Relay | 24 | Includes contact output (1a, 1b) | ||
MYR 107.15 | 1 Piece(s) | 5 Day(s) or more | 1 s – 10 min | Transistor | 12/24 | Does not include contact output | ||
MYR 110.66 | 1 Piece(s) | 5 Day(s) or more | 6 s – 60 min | Transistor | 12/24 | Does not include contact output |
Loading...
Basic Information
| Type | Time switch | Display method | No display function | Mounting Method | Surface mounting |
|---|---|---|---|---|---|
| Power Supply Voltage | Dedicated to DC | Representative Standard | UL / CSA | Dimension vertical(mm) | 17.75 |
| Dimension width(mm) | 36.9 | Dimension depth(mm) | 19.5 | Time ranges = N | 4 range |
Specification/Dimensions
-
Time specifications(s)
-
Output Method
- Relay
- Transistor
-
Rated power supply voltage(V)
- 5
- 12
- 12/24
- 24
-
Contact Configuration
- Includes contact output (1a, 1b)
- Does not include contact output
Days to Ship
-
- All
- 2 Day(s) or Less
- 5 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Total counter/Time counter (DIN48 × 24) H7GP
- Quartz timer H5AN
- Solid State/Timer H3DK-H
- Solid State/Timer H3DK-M / -S
- Digital Time Switch H5S
- Digital Daily Time Switch H5F
- Solid State/Timer H3DK-G
- Multi Timer H3DT-N/-L
Customers Who Viewed This Item Also Viewed
-
-
-
-
-
-
-
-
-
-
DC Power Relay (60 A and 100 A Type) G9EA-1OMRON
Standard Price : MYR 688.93
Days to Ship : 2 Day(s) or more
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy