(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
SUMIBORON Insert, Triangle-Shape With Hole, Negative, 6NC-TNGA-HS
[Features]
· The main component in SUMIBORON is Cubic Boron Nitride (CBN), with a special ceramic bonding material added, and sintered under super high pressure and temperature; compared with conventional tool materials, CBN features higher hardness and excellent heat-resistant properties.
· No-sharpening, single-use type for easy tool management.
· Multiple SUMIBORON pieces are brazed onto a single tool insert, resulting in a more economical unit price per cutting blade compared with single-use, 1-corner types.
· G-class precision specification that features all-around polishing. All corners are additionally marked with numbers to simplify keeping track of already-used corners.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Use | No. of Usable Corners | Work Material | Nose Radius | Corner Height Tolerance | Inscribed Circle Tolerance | Thickness Tolerance | Hole Availability | Hole Shape | Breaker Availability | Material Type | Detail Nose Radius (mm) | Machining Application ② | Specification Details | Cutting Edge Length (mm) | Material | No. of Inserts | No. of Insert Types | Type Code |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 564.41 | 1 Piece(s) | 5 Day(s) or more | Outer Diameter / Inner Diameter | - | High-Hardness Material | 0.4 | ±0.025 | ±0.025 | ±0.13 | Available | Cylinder State | NA | BNC160 | 0.4 | Reinforced cutting edge type | - | 16.5 | CBN | 6 | Multi Corner Type | Coated Sumiboron series | ||
MYR 564.41 | 1 Piece(s) | 5 Day(s) or more | Outer Diameter / Inner Diameter | - | High-Hardness Material | 0.4 | ±0.025 | ±0.025 | ±0.13 | Available | Cylinder State | NA | BNC200 | 0.4 | Reinforced cutting edge type | - | 16.5 | CBN | 6 | Multi Corner Type | Coated Sumiboron series | ||
MYR 527.06 | 1 Piece(s) | 5 Day(s) or more | - | 6 | High-Hardness Material | 0.4 | - | - | - | Yes | Cylindrical | NA / No | BNC2010 | - | - | Reinforced cutting edge type | 2.3 | Coated CBN | - | - | - | ||
MYR 527.06 | 1 Piece(s) | 5 Day(s) or more | - | 6 | High-Hardness Material | 0.4 | - | - | - | Yes | Cylindrical | NA / No | BNC2020 | - | - | Reinforced cutting edge type | 2.3 | Coated CBN | - | - | - | ||
MYR 564.41 | 1 Piece(s) | 5 Day(s) or more | Outer Diameter / Inner Diameter | - | High-Hardness Material | 0.4 | ±0.025 | ±0.025 | ±0.13 | Available | Cylinder State | NA | BNC300 | 0.4 | Reinforced cutting edge type | - | 16.5 | CBN | 6 | Multi Corner Type | Coated Sumiboron series | ||
MYR 564.41 | 1 Piece(s) | 5 Day(s) or more | Outer Diameter / Inner Diameter | - | Cast Iron | 0.4 | ±0.025 | ±0.025 | ±0.13 | Available | Cylinder State | NA | BNC500 | 0.4 | Reinforced cutting edge type | - | 16.5 | CBN | 6 | Multi Corner Type | Coated Sumiboron series | ||
MYR 564.41 | 1 Piece(s) | 5 Day(s) or more | Outer Diameter / Inner Diameter | - | High-Hardness Material | 0.8 | ±0.025 | ±0.025 | ±0.13 | Available | Cylinder State | NA | BNC160 | 0.8 | Reinforced cutting edge type | - | 16.5 | CBN | 6 | Multi Corner Type | Coated Sumiboron series | ||
MYR 564.41 | 1 Piece(s) | 5 Day(s) or more | Outer Diameter / Inner Diameter | - | High-Hardness Material | 0.8 | ±0.025 | ±0.025 | ±0.13 | Available | Cylinder State | NA | BNC200 | 0.8 | Reinforced cutting edge type | - | 16.5 | CBN | 6 | Multi Corner Type | Coated Sumiboron series | ||
MYR 527.06 | 1 Piece(s) | 5 Day(s) or more | - | 6 | High-Hardness Material | 0.8 | - | - | - | Yes | Cylindrical | NA / No | BNC2010 | - | - | Reinforced cutting edge type | 2 | Coated CBN | - | - | - | ||
MYR 527.06 | 1 Piece(s) | 5 Day(s) or more | - | 6 | High-Hardness Material | 0.8 | - | - | - | Yes | Cylindrical | NA / No | BNC2020 | - | - | Reinforced cutting edge type | 2 | Coated CBN | - | - | - | ||
MYR 564.41 | 1 Piece(s) | 5 Day(s) or more | Outer Diameter / Inner Diameter | - | High-Hardness Material | 0.8 | ±0.025 | ±0.025 | ±0.13 | Available | Cylinder State | NA | BNC300 | 0.8 | Reinforced cutting edge type | - | 16.5 | CBN | 6 | Multi Corner Type | Coated Sumiboron series | ||
MYR 564.41 | 1 Piece(s) | 5 Day(s) or more | Outer Diameter / Inner Diameter | - | Cast Iron | 0.8 | ±0.025 | ±0.025 | ±0.13 | Available | Cylinder State | NA | BNC500 | 0.8 | Reinforced cutting edge type | - | 16.5 | CBN | 6 | Multi Corner Type | Coated Sumiboron series | ||
MYR 564.41 | 1 Piece(s) | 5 Day(s) or more | Outer Diameter / Inner Diameter | - | High-Hardness Material | 1.2 | ±0.025 | ±0.025 | ±0.13 | Available | Cylinder State | NA | BNC160 | 1.2 | Reinforced cutting edge type | - | 16.5 | CBN | 6 | Multi Corner Type | Coated Sumiboron series | ||
MYR 564.41 | 1 Piece(s) | 5 Day(s) or more | Outer Diameter / Inner Diameter | - | High-Hardness Material | 1.2 | ±0.025 | ±0.025 | ±0.13 | Available | Cylinder State | NA | BNC200 | 1.2 | Reinforced cutting edge type | - | 16.5 | CBN | 6 | Multi Corner Type | Coated Sumiboron series | ||
MYR 527.06 | 1 Piece(s) | 5 Day(s) or more | - | 6 | High-Hardness Material | 1.2 | - | - | - | Yes | Cylindrical | NA / No | BNC2010 | - | - | Reinforced cutting edge type | 2 | Coated CBN | - | - | - | ||
MYR 527.06 | 1 Piece(s) | 5 Day(s) or more | - | 6 | High-Hardness Material | 1.2 | - | - | - | Yes | Cylindrical | NA / No | BNC2020 | - | - | Reinforced cutting edge type | 2 | Coated CBN | - | - | - | ||
MYR 564.41 | 1 Piece(s) | 5 Day(s) or more | Outer Diameter / Inner Diameter | - | Cast Iron | 1.2 | ±0.025 | ±0.025 | ±0.13 | Available | Cylinder State | NA | BNC500 | 1.2 | Reinforced cutting edge type | - | 16.5 | CBN | 6 | Multi Corner Type | Coated Sumiboron series |
Loading...
Basic Information
| Shape | T (Triangular) | Rake Angle | Negative | Clearance Angle(°) | 0 |
|---|---|---|---|---|---|
| Slot Code | A | Dimension S(mm) | 4.76 | Dimension φd(mm) | 9.525 |
Specification/Dimensions
-
Use
- Outer Diameter / Inner Diameter
-
No. of Usable Corners
- 6
-
Work Material
- Cast Iron
- High-Hardness Material
-
Nose Radius
-
Corner Height Tolerance
- ±0.025
-
Inscribed Circle Tolerance
- ±0.025
-
Thickness Tolerance
- ±0.13
-
Hole Availability
- Available
- Yes
-
Hole Shape
- Cylinder State
- Cylindrical
-
Breaker Availability
- NA
- No
-
Material Type
-
Detail Nose Radius(mm)
-
Machining Application ②
- Reinforced cutting edge type
-
Specification Details
- Reinforced cutting edge type
-
type
- 6NC-TNGA-HS
- 6NC-TNGA□□□□□HS
Days to Ship
-
- All
- 5 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Blade Tip Replacement Tip C (80°Diamond) CNMG-N-GZ
- Blade Tip Replacement Tip W (Hexagonal) WBGT-L-W
- CoroCut 1 Plunging/Grooving CBN Tip
- Tip for Lathe, CBN Diamond, Positive TPMH
- T-Max P Negative Insert For Turning (Diamond Shaped 80°)
- Sandvik T-Max P Lathe Negative Tip 3215
- 35° Diamond-Shape With Hole, Negative, VNMG-EG, For Medium Cutting
- SUMIBORON Insert C (80° Diamond) 4NC-CNGA-WG
Customers Who Viewed This Item Also Viewed
-
Sumi Diamond Chip C (80° Rhombus) NF-CCMT-TSUMITOMO ELECTRIC HARDMETAL
Standard Price : MYR 333.22
Days to Ship : 5 Day(s) or more
-
-
SEC-Wave Mill For WFXF 12000R(S) Type InsertSUMITOMO ELECTRIC HARDMETAL
Standard Price : MYR 44.73-
Days to Ship : 9 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy