(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

Beam Drill (Twist type) VN-DTD Type (VN-DTD-053)

Part Number

Configured Part Number is shown.

VN-DTD-053

Configured Specifications

Hole diameter (drill diameter) D(mm)5.3Groove Length L(mm)60
work materialAluminum[○] / Graphite[◎]Overall Length L(mm)150
Shank Typestraight shankCoating Y/NNA
Coating TypeNon-CoatedWith/without Oil HoleNA
Dimensions/Ds(φ mm)5FeaturesCompared with the conventional diamond drill, because it is an integral type, it can be twisted by 30°against the cutting edge, so high speed machining is possible, the strength of the cutting edge is high, diamond fallout is eliminated, a clean finished surface can be obtained, and chips can be discharged smoothly.
Machining ApplicationDrillingSpecificationsTorsion Angle 30°, Effective Machining Depth 3xDc
Part Number
VN-DTD-053
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipHole diameter (drill diameter) D
(mm)
Groove Length L
(mm)
Overall Length L
(mm)
Dimensions/Ds
(φ mm)

MYR 5,211.72

1 Piece(s) 14 Day(s) 5.3601505
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipHole diameter (drill diameter) D
(mm)
Groove Length L
(mm)
Overall Length L
(mm)
Dimensions/Ds
(φ mm)
  1. 1

Basic Information

work material Aluminum / Graphite Shank Type straight shank Coating Y/N NA
Coating Type Non-Coated With/without Oil Hole NA Features Compared with the conventional diamond drill, because it is an integral type, it can be twisted by 30°against the cutting edge, so high speed machining is possible, the strength of the cutting edge is high, diamond fallout is eliminated, a clean finished surface can be obtained, and chips can be discharged smoothly.
Machining Application Drilling Specifications Torsion Angle 30°, Effective Machining Depth 3xDc

Please check the type/dimensions/specifications of the part VN-DTD-053 in the Beam Drill (Twist type) VN-DTD Type series.

Products like this...

Part Number
VN-DTD-022
VN-DTD-023
VN-DTD-024
VN-DTD-054
VN-DTD-055
VN-DTD-056
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipHole diameter (drill diameter) D
(mm)
Groove Length L
(mm)
Overall Length L
(mm)
Dimensions/Ds
(φ mm)

MYR 2,890.18

1 Piece(s) 11 Day(s) 2.2301002

MYR 2,890.18

1 Piece(s) 11 Day(s) 2.3301002

MYR 2,890.18

1 Piece(s) 11 Day(s) 2.4301002

MYR 5,211.72

1 Piece(s) 14 Day(s) 5.4601505

MYR 4,781.00

1 Piece(s) 14 Day(s) 5.5601506

MYR 5,556.29

1 Piece(s) 14 Day(s) 5.6601506
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipHole diameter (drill diameter) D
(mm)
Groove Length L
(mm)
Overall Length L
(mm)
Dimensions/Ds
(φ mm)

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)

Not a MISUMI customer yet? Register & enjoy 50% off your 1st order!* (*T&C apply.)

  • 7 Million Products
  • 2,000 Brands
  • Free CAD downloads
  • Quote/order any time