(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
CoroMill 490 Cutter【1-185 Pieces Per Package】
Suitable for high-efficiency machining.
| Part Number | Standard Unit Price | Number of pc(s). included in pkg. | Minimum order quantity | Volume Discount | Days to Ship | blade diameter D (φ) | Finish category | Shank diameter (d) (mm) | Number of flutes (sheet) | Maximum Cutting Depth (Ad) (mm) | Maximum Engine Speed n max | Coolant | Mass (kg) | Specifications | Tip Size (mm) | Blade distribution | Program Length (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 4,731.36 | 1 Piece(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | |||
MYR 3,954.39 | 1 Piece(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | |||
MYR 4,312.26 | 1 Piece(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | |||
MYR 4,508.08 | 1 Piece(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | |||
MYR 3,988.15 | 1 Piece(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | |||
MYR 4,312.26 | 1 Piece(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | |||
MYR 5,573.59 | 1 Piece(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | |||
MYR 4,730.90 | 1 Piece(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | |||
MYR 5,156.29 | 1 Piece(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | |||
MYR 4,899.70 | 1 Piece(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | |||
MYR 5,487.15 | 1 Piece(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | |||
MYR 8,782.23 | 1 Piece(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | |||
MYR 3,920.10 | 1 Piece(s) | 10 Day(s) | 40mm | Rough and medium rough processing | 16 | 6 | 5.5 | 29300 | Coolant Center-Through | 0.2 | Extra-Cross Pitch (Multiple Flutes) | 8 | Unequal division | 40 | |||
MYR 3,411.36 | 1 Piece(s) | 10 Day(s) | 40mm | Rough and medium rough processing | 16 | 4 | 5.5 | 29300 | Coolant Center-Through | 0.2 | Cross Pitch (Medium Flutes) | 8 | Unequal division | 40 | |||
MYR 3,691.25 | 1 Piece(s) | 10 Day(s) | 44mm | Rough and medium rough processing | 16 | 5 | 5.5 | 27600 | Coolant Center-Through | 0.2 | Cross Pitch (Medium Flutes) | 8 | Unequal division | 40 | |||
MYR 4,098.75 | 1 Piece(s) | 10 Day(s) | 54mm | Rough and medium rough processing | 22 | 4 | 10 | 13000 | Coolant Center-Through | 0.3 | Cross Pitch (Medium Flutes) | 14 | Unequal division | 40 | |||
MYR 5,575.43 | 1 Piece(s) | 10 Day(s) | 63mm | Rough and medium rough processing | 22 | 6 | 10 | 11700 | Coolant Center-Through | 0.4 | Extra-Cross Pitch (Multiple Flutes) | 14 | Unequal division | 40 | |||
MYR 5,275.81 | 1 Piece(s) | 10 Day(s) | 66mm | Rough and medium rough processing | 22 | 6 | 5.5 | 21600 | Coolant Center-Through | 0.5 | Cross Pitch (Medium Flutes) | 8 | Equal division | 40 | |||
MYR 5,034.91 | 1 Piece(s) | 10 Day(s) | 66mm | Rough and medium rough processing | 22 | 5 | 10 | 11400 | Coolant Center-Through | 0.4 | Cross Pitch (Medium Flutes) | 14 | Unequal division | 40 | |||
MYR 6,828.78 | 1 Piece(s) | 10 Day(s) | 80mm | Rough and medium rough processing | 27 | 10 | 5.5 | 19400 | Coolant Center-Through | 1.2 | Extra-Cross Pitch (Multiple Flutes) | 8 | Unequal division | 50 | |||
MYR 6,024.37 | 1 Piece(s) | 10 Day(s) | 80mm | Finishing | 27 | 6 | 5.5 | 19400 | Coolant Center-Through | 1.2 | Coarse Pitch (Few Flutes) | 8 | Equal division | 50 | |||
MYR 6,388.76 | 1 Piece(s) | 10 Day(s) | 80mm | Rough and medium rough processing | 27 | 8 | 5.5 | 19400 | Coolant Center-Through | 1.2 | Cross Pitch (Medium Flutes) | 8 | Unequal division | 50 | |||
MYR 6,604.40 | 1 Piece(s) | 10 Day(s) | 80mm | Rough and medium rough processing | 27 | 8 | 10 | 10100 | Coolant Center-Through | 1 | Extra-Cross Pitch (Multiple Flutes) | 14 | Unequal division | 50 | |||
MYR 6,388.76 | 1 Piece(s) | 10 Day(s) | 84mm | Rough and medium rough processing | 27 | 8 | 5.5 | 18900 | Coolant Center-Through | 1.3 | Cross Pitch (Medium Flutes) | 8 | Unequal division | 50 | |||
MYR 5,644.98 | 1 Piece(s) | 10 Day(s) | 84mm | Rough and medium rough processing | 27 | 6 | 10 | 9800 | Coolant Center-Through | 1.1 | Cross Pitch (Medium Flutes) | 14 | Unequal division | 50 | |||
MYR 8,021.70 | 1 Piece(s) | 10 Day(s) | 100mm | Rough and medium rough processing | 32 | 10 | 5.5 | 17100 | Without Coolant | 1.6 | Extra-Cross Pitch (Multiple Flutes) | 8 | Unequal division | 50 | |||
MYR 6,574.30 | 1 Piece(s) | 10 Day(s) | 100mm | Finishing | 32 | 6 | 5.5 | 17100 | Without Coolant | 1.6 | Coarse Pitch (Few Flutes) | 8 | Equal division | 50 | |||
MYR 7,517.20 | 1 Piece(s) | 10 Day(s) | 100mm | Rough and medium rough processing | 32 | 8 | 5.5 | 17100 | Without Coolant | 1.6 | Cross Pitch (Medium Flutes) | 8 | Unequal division | 50 | |||
MYR 7,905.50 | 1 Piece(s) | 10 Day(s) | 100mm | Rough and medium rough processing | 32 | 10 | 10 | 8900 | Coolant Center-Through | 1.4 | Extra-Cross Pitch (Multiple Flutes) | 14 | Unequal division | 50 | |||
MYR 5,161.58 | 1 Piece(s) | 10 Day(s) | 100mm | Finishing | 32 | 5 | 10 | 8900 | Coolant Center-Through | 1.4 | Coarse Pitch (Few Flutes) | 14 | Equal division | 50 | |||
MYR 6,233.36 | 1 Piece(s) | 10 Day(s) | 100mm | Rough and medium rough processing | 32 | 7 | 10 | 8900 | Coolant Center-Through | 1.4 | Cross Pitch (Medium Flutes) | 14 | Unequal division | 50 | |||
MYR 10,126.95 | 1 Piece(s) | 10 Day(s) | 125mm | Rough and medium rough processing | 40 | 12 | 5.5 | 15200 | Without Coolant | 2.9 | Extra-Cross Pitch (Multiple Flutes) | 8 | Unequal division | 63 | |||
MYR 9,167.43 | 1 Piece(s) | 10 Day(s) | 125mm | Finishing | 40 | 8 | 5.5 | 15200 | Without Coolant | 2.9 | Coarse Pitch (Few Flutes) | 8 | Unequal division | 63 | |||
MYR 9,622.68 | 1 Piece(s) | 10 Day(s) | 125mm | Rough and medium rough processing | 40 | 10 | 5.5 | 15200 | Without Coolant | 2.9 | Cross Pitch (Medium Flutes) | 8 | Unequal division | 63 | |||
MYR 10,573.73 | 1 Piece(s) | 10 Day(s) | 125mm | Rough and medium rough processing | 40 | 12 | 10 | 7800 | Coolant Center-Through | 2.6 | Extra-Cross Pitch (Multiple Flutes) | 14 | Unequal division | 63 | |||
MYR 7,389.58 | 1 Piece(s) | 10 Day(s) | 125mm | Finishing | 40 | 6 | 10 | 7800 | Coolant Center-Through | 2.6 | Coarse Pitch (Few Flutes) | 14 | Unequal division | 63 | |||
MYR 8,468.40 | 1 Piece(s) | 10 Day(s) | 125mm | Rough and medium rough processing | 40 | 8 | 10 | 7800 | Coolant Center-Through | 2.6 | Cross Pitch (Medium Flutes) | 14 | Equal division | 63 | |||
MYR 12,739.66 | 1 Piece(s) | 10 Day(s) | 160mm | Rough and medium rough processing | 40 | 15 | 10 | 6800 | Without Coolant | 4.4 | Extra-Cross Pitch (Multiple Flutes) | 14 | Unequal division | 63 | |||
MYR 11,145.08 | 1 Piece(s) | 10 Day(s) | 160mm | Rough and medium rough processing | 40 | 12 | 10 | 6800 | Without Coolant | 4.4 | Cross Pitch (Medium Flutes) | 14 | Unequal division | 63 | |||
MYR 11,081.21 | 1 Piece(s) | 10 Day(s) | 200mm | Finishing | 60 | 10 | 10 | 6000 | Without Coolant | 7.4 | Coarse Pitch (Few Flutes) | 14 | Unequal division | 63 | |||
MYR 14,265.35 | 1 Piece(s) | 10 Day(s) | 200mm | Rough and medium rough processing | 60 | 16 | 10 | 6000 | Without Coolant | 7.4 | Cross Pitch (Medium Flutes) | 14 | Unequal division | 63 | |||
MYR 13,746.46 | 1 Piece(s) | 10 Day(s) | 250mm | Finishing | 60 | 12 | 10 | 5300 | Without Coolant | 11.3 | Coarse Pitch (Few Flutes) | 14 | Unequal division | 63 | |||
MYR 7,296.74 | 185 Pieces Per Package | 1 Pack(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | ||
MYR 7,836.92 | 1 Piece(s) | 10 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Basic Information
| Machining Application | Plane / Side / Groove | work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin | Mounting Method | Arbor |
|---|---|---|---|---|---|
| Compatible Tip Material | Carbide Coat | Details Type | Arbor Mounted | Cutting Angle (κr)(°) | 90 |
Specification/Dimensions
-
blade diameter D(φ)
-
Finish category
- Rough and medium rough processing
- Finishing
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Maximum Cutting Depth (Ad)(mm)
-
Maximum Engine Speed n max
-
Coolant
- Coolant Center-Through
- Without Coolant
-
Mass(kg)
-
type
- 490-Q
- A490-J
Days to Ship
-
- All
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- MCSE Type Chamfering End Mill
- F3000 Series, Positive Mill, Neo Straight Shank /F3042ASS
- Shuririn
- SEC-Metal Slash Mill MSX08000R Type
- MEC Type Head
- MRW Type End Mill
- PFB Phoenix Series Finishing Ball End Mill Screw-In Type
- Sandvik CoroMill 390 Cutter
Customers Who Viewed This Item Also Viewed
-
-
-
-
-
Side Cutter, Milling Cutter, Front Face Milling CutterSANDVIK
Standard Price : MYR 4,513.86
Days to Ship : 10 Day(s)
-
-
-
Swing Ball SWB Type Long Shank Type / Combination TypeDIJET
Standard Price : MYR 3,559.98-
Days to Ship : 7 Day(s) or more
-
Side Chipper (Shank Type Mill) SIC Type - Medium TypeDIJET
Standard Price : MYR 1,499.73-
Days to Ship : 7 Day(s) or more
-
Swing Ball SWB Type G-Body SeriesDIJET
Standard Price : MYR 3,741.90-
Days to Ship : 7 Day(s) or more
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy