(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
PFR Phoenix Series Insert for Radius End Mills for Finishing
It is an insert with high corner radius accuracy, full profile bottom edge, and special treatment to improve the cutting edge strength. Good machining accuracy can be obtained.
Part Number
Configured Part Number is shown.
Product features and specifications
Insert features
- High corner radius accuracy ±8 µm
- Outer diameter tolerance -0.02 mm
- Full profile on the bottom flute
- Cutting edge strength is improved by applying special treatment
High stiffness body
- High-precision, high stiffness body that realizes stable machining
- PFB body can be diverted
(It is recommended to use a PFB body with a large clearance when processing parts such as standing walls where cutting chips are likely to get caught)
Drawing
Recommended cutting conditions
Recommended cutting condition table
Finishing radius end mill PFR
Cutting condition standard table
Standard conditions
PFR-ST/PFR-SH
PFR-D
High speed finishing conditions
Steel shank
Carbide shank, short type
Carbide long shank
Carbide shank, extra long type
Precautions for cutting conditions
The values in the recommended cutting condition table show general values at actual cutting speed. Please adjust appropriately according to the cutting environment.
Compatible work material
Recommended material for each work material
◎: First recommended material○: Second recommended material
* XP3225 is the first recommendation for L/D ≥ 5
* XP3310 is the first recommendation for intermittent cutting
* 1 First recommendation for aluminum alloy
* 2 First recommendation for graphite and CFRP
Selection support information
List of PFR insert material
| Classification | Grade | Coating method | Base metal hardness (HRA) | Coating layer | Features | |
|---|---|---|---|---|---|---|
| Main components | Film thickness | |||||
| P | XP3225 | PVD | 91.5 | Cr system | 3µm | Grade for steel / stainless steel / cast iron processing A tough carbide base material and a highly versatile coating |
| XP3310 | PVD | 92.5 | Heat-resistant reinforced coating, containing SiC | 3µm | Grade for steel / cast iron processing Dedicated grade of cast iron and high hardness steel for carbide base material with high strength and toughness and for coating film with excellent abrasion resistance | |
| N | XC4505 | CVD | 93.0 | DIA | 12µm | Grade for non-ferrous metal processing Coating film with excellent film strength due to fine diamond crystals |
Finishing radius end mill
Flat surface
Side
Side
Shape cutting
Steel shank
| Tool No. | Nominal | Outer diameter DC | Overall length LF | Effective length | Number of flutes ZEFP | Shank diameter DCON | Shank length LS | Neck diameter DN | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Body length LH | L/D | |||||||||
| (2) | 7832000 | PFR-R080SS08-S120 | 8 | 120 | 36 | 4.5 | 2 | 8 | 84 | 7.5 |
| (3) | 7832001 | PFR-R100SS10-S130 | 10 | 130 | 45 | 4.5 | 2 | 10 | 85 | 9.5 |
| (4) | 7832002 | PFR-R120SS12-S130 | 12 | 130 | 54 | 4.5 | 2 | 12 | 76 | 11.5 |
| (5) | 7832003 | PFR-R160SS16-S140 | 16 | 140 | 64 | 4 | 2 | 16 | 76 | 15.5 |
| (6) | 7832004 | PFR-R200SS20-S160 | 20 | 160 | 80 | 4 | 2 | 20 | 80 | 19.5 |
| (7) | 7832005 | PFR-R250SS25-S160 | 25 | 160 | 75 | 3 | 2 | 25 | 85 | 24.5 |
| (8) | 7832006 | PFR-R300SS32-S170 | 30 | 170 | 90 | 3 | 2 | 32 | 80 | 29.5 |
| (9) | 7832007 | PFR-R320SS32-S180 | 32 | 180 | 96 | 3 | 2 | 32 | 84 | 31.5 |
Carbide shank, short type
| Tool No. | Nominal | Outer diameter DC | Overall length LF | Effective length | Number of flutes ZEFP | Shank diameter DCON | Shank length LS | Neck diameter DN | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Body length LH | L/D | |||||||||
| (1) | 7832029 | PFR-R060SS06-S80CS | 6 | 80 | 15 | 2.5 | 2 | 6 | 65 | 5.4 |
| (2) | 7832030 | PFR-R080SS08-S100CS | 8 | 100 | 20 | 2.5 | 2 | 8 | 80 | 7.5 |
| (3) | 7832031 | PFR-R100SS10-S100CS | 10 | 100 | 25 | 2.5 | 2 | 10 | 75 | 9.5 |
| (4) | 7832032 | PFR-R120SS12-S110CS | 12 | 110 | 30 | 2.5 | 2 | 12 | 80 | 11.5 |
| (5) | 7832033 | PFR-R160SS16-S140CS | 16 | 140 | 40 | 2.5 | 2 | 16 | 100 | 15.5 |
| (6) | 7832034 | PFR-R200SS20-S160CS | 20 | 160 | 50 | 2.5 | 2 | 20 | 110 | 19.5 |
| (7) | 7832035 | PFR-R250SS25-S160CS | 25 | 160 | 62.5 | 2.5 | 2 | 25 | 97.5 | 24.5 |
| (8) | 7832036 | PFR-R300SS32-S170CS | 30 | 170 | 75 | 2.5 | 2 | 32 | 95 | 29.5 |
| (9) | 7832037 | PFR-R320SS32-S180CS | 32 | 180 | 80 | 2.5 | 2 | 32 | 100 | 31.5 |
Carbide shank, long type
| Tool No. | Nominal | Outer diameter DC | Overall length LF | Effective length | Number of flutes ZEFP | Shank diameter DCON | Shank length LS | Neck diameter DN | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Body length LH | L/D | |||||||||
| (1) | 7832039 | PFR-R060SS06-L100CS | 6 | 100 | 30 | 5 | 2 | 6 | 70 | 5.4 |
| (2) | 7832040 | PFR-R080SS08-L120CS | 8 | 120 | 40 | 5 | 2 | 8 | 80 | 7.5 |
| (3) | 7832041 | PFR-R100SS10-L130CS | 10 | 130 | 50 | 5 | 2 | 10 | 80 | 9.5 |
| (4) | 7832042 | PFR-R120SS12-L140CS | 12 | 140 | 60 | 5 | 2 | 12 | 80 | 11.5 |
| (5) | 7832043 | PFR-R160SS16-L160CS | 16 | 160 | 72 | 4.5 | 2 | 16 | 88 | 15.5 |
| (6) | 7832044 | PFR-R200SS20-L180CS | 20 | 180 | 90 | 4.5 | 2 | 20 | 90 | 19.5 |
| (7) | 7832045 | PFR-R250SS25-L200CS | 25 | 200 | 100 | 4 | 2 | 25 | 100 | 24.5 |
| (8) | 7832046 | PFR-R300SS32-L220CS | 30 | 220 | 120 | 4 | 2 | 32 | 100 | 29.5 |
| (9) | 7832047 | PFR-R320SS32-L230CS | 32 | 230 | 128 | 4 | 2 | 32 | 102 | 31.5 |
Carbide shank, extra long type
| Tool No. | Nominal | Outer diameter DC | Overall length LF | Effective length | Number of flutes ZEFP | Shank diameter DCON | Shank length LS | Neck diameter DN | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Body length LH | L/D | |||||||||
| (1) | 7832019 | PFR-R060SS06-LL120CS | 6 | 120 | 42 | 7 | 2 | 6 | 78 | 5.4 |
| (2) | 7832020 | PFR-R080SS08-LL140CS | 8 | 140 | 56 | 7 | 2 | 8 | 84 | 7.5 |
| (3) | 7832021 | PFR-R100SS10-LL150CS | 10 | 150 | 70 | 7 | 2 | 10 | 80 | 9.5 |
| (4) | 7832022 | PFR-R120SS12-LL160CS | 12 | 160 | 84 | 7 | 2 | 12 | 76 | 11.5 |
| (5) | 7832023 | PFR-R160SS16-LL200CS | 16 | 200 | 96 | 6 | 2 | 16 | 104 | 15.5 |
| (6) | 7832024 | PFR-R200SS20-LL240CS | 20 | 240 | 120 | 6 | 2 | 20 | 120 | 19.5 |
| (7) | 7832025 | PFR-R250SS25-LL260CS | 25 | 260 | 137.5 | 5.5 | 2 | 25 | 122.5 | 24.5 |
| (8) | 7832026 | PFR-R300SS32-LL290CS | 30 | 290 | 165 | 5.5 | 2 | 32 | 125 | 29.5 |
| (9) | 7832027 | PFR-R320SS32-LL300CS | 32 | 300 | 175 | 5.5 | 2 | 32 | 125 | 31.5 |
Finishing radius end mill
Screw-in type
| Tool No. | Nominal | Outer diameter DC | Number of flutes ZEFP | Mounting diameter DCON | Screw size CRKS | Wrench size | Overall length LF | Neck diameter DN | End face diameter DCSFMS | |
|---|---|---|---|---|---|---|---|---|---|---|
| (3) | 7832090 | PFR-R100SF6 | 10 | 2 | 6.5 | M6 | 7 | 26 | 9 | 9 |
| (4) | 7832091 | PFR-R120SF6 | 12 | 2 | 6.5 | M6 | 7 | 26 | 11 | 11 |
| (5) | 7832092 | PFR-R160SF8 | 16 | 2 | 8.5 | M8 | 10 | 32 | 15 | 14.5 |
| (6) | 7832093 | PFR-R200SF10 | 20 | 2 | 10.5 | M10 | 14 | 38 | 19 | 18 |
| (7) | 7832094 | PFR-R250SF12 | 25 | 2 | 12.5 | M12 | 17 | 38 | 24 | 23 |
| (8) | 7832095 | PFR-R300SF16 | 30 | 2 | 17 | M16 | 22 | 43 | 29 | 28 |
| (9) | 7832096 | PFR-R320SF16 | 32 | 2 | 17 | M16 | 22 | 43 | 31 | 28 |
Parts (compatible body numbers are equivalent to tool Nos. (1) to (9).)
Please purchase the wrench separately.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Work Material | Material Type | Nominal | Tool No | Dimension Thickness T (mm) | R (mm) | Material | Insert Diameter Dc (mm) | Height H (mm) | Shape Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 616.77 | 10 Piece(s) | 4 Day(s) or more | Non-Ferrous Metal | XC4505 | PFR060R03-D | 7820450 | 2 | 0.3 | Diamond Coating | 6 | 5 | - | ||
MYR 224.05 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / High-Hardness Material | XP3310 | PFR060R03-SH | 7820400 | 2 | 0.3 | Coating | 6 | 5 | Reinforced cutting edge type | ||
MYR 224.05 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | XP3225 | PFR060R03-ST | 7820350 | 2 | 0.3 | Coating | 6 | 5 | General purpose type | ||
MYR 616.77 | 10 Piece(s) | 4 Day(s) or more | Non-Ferrous Metal | XC4505 | PFR060R05-D | 7820451 | 2 | 0.5 | Diamond Coating | 6 | 5 | - | ||
MYR 224.05 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / High-Hardness Material | XP3310 | PFR060R05-SH | 7820401 | 2 | 0.5 | Coating | 6 | 5 | Reinforced cutting edge type | ||
MYR 224.05 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | XP3225 | PFR060R05-ST | 7820351 | 2 | 0.5 | Coating | 6 | 5 | General purpose type | ||
MYR 616.77 | 10 Piece(s) | 4 Day(s) or more | Non-Ferrous Metal | XC4505 | PFR060R10-D | 7820452 | 2 | 1 | Diamond Coating | 6 | 5 | - | ||
MYR 224.05 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / High-Hardness Material | XP3310 | PFR060R10-SH | 7820402 | 2 | 1 | Coating | 6 | 5 | Reinforced cutting edge type | ||
MYR 224.05 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | XP3225 | PFR060R10-ST | 7820352 | 2 | 1 | Coating | 6 | 5 | General purpose type | ||
MYR 230.02 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / High-Hardness Material | XP3310 | PFR070R03-SH | 7820403 | 2 | 0.3 | Coating | 7 | 5.5 | Reinforced cutting edge type | ||
MYR 230.02 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | XP3225 | PFR070R03-ST | 7820353 | 2 | 0.3 | Coating | 7 | 5.5 | General purpose type | ||
MYR 230.02 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / High-Hardness Material | XP3310 | PFR070R05-SH | 7820404 | 2 | 0.5 | Coating | 7 | 5.5 | Reinforced cutting edge type | ||
MYR 230.02 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | XP3225 | PFR070R05-ST | 7820354 | 2 | 0.5 | Coating | 7 | 5.5 | General purpose type | ||
MYR 230.02 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / High-Hardness Material | XP3310 | PFR070R10-SH | 7820405 | 2 | 1 | Coating | 7 | 5.5 | Reinforced cutting edge type | ||
MYR 230.02 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | XP3225 | PFR070R10-ST | 7820355 | 2 | 1 | Coating | 7 | 5.5 | General purpose type | ||
MYR 643.49 | 10 Piece(s) | 4 Day(s) or more | Non-Ferrous Metal | XC4505 | PFR080R03-D | 7820300 | 2.4 | 0.3 | Diamond Coating | 8 | 7 | - | ||
MYR 238.41 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3310 | PFR080R03-SH | 7820250 | 2.4 | 0.3 | Coating | 8 | 7 | Reinforced cutting edge type | ||
MYR 238.41 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3225 | PFR080R03-ST | 7820200 | 2.4 | 0.3 | Coating | 8 | 7 | General Purpose | ||
MYR 643.49 | 10 Piece(s) | 4 Day(s) or more | Non-Ferrous Metal | XC4505 | PFR080R05-D | 7820301 | 2.4 | 0.5 | Diamond Coating | 8 | 7 | - | ||
MYR 238.41 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3310 | PFR080R05-SH | 7820251 | 2.4 | 0.5 | Coating | 8 | 7 | Reinforced cutting edge type | ||
MYR 238.41 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3225 | PFR080R05-ST | 7820201 | 2.4 | 0.5 | Coating | 8 | 7 | General Purpose | ||
MYR 643.49 | 10 Piece(s) | 4 Day(s) or more | Non-Ferrous Metal | XC4505 | PFR080R10-D | 7820302 | 2.4 | 1 | Diamond Coating | 8 | 7 | - | ||
MYR 238.41 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3310 | PFR080R10-SH | 7820252 | 2.4 | 1 | Coating | 8 | 7 | Reinforced cutting edge type | ||
MYR 238.41 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3225 | PFR080R10-ST | 7820202 | 2.4 | 1 | Coating | 8 | 7 | General Purpose | ||
MYR 238.41 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3310 | PFR080R20-SH | 7820253 | 2.4 | 2 | Coating | 8 | 7 | Reinforced cutting edge type | ||
MYR 238.41 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3225 | PFR080R20-ST | 7820203 | 2.4 | 2 | Coating | 8 | 7 | General Purpose | ||
MYR 703.67 | 10 Piece(s) | 4 Day(s) or more | Non-Ferrous Metal | XC4505 | PFR100R03-D | 7820303 | 2.6 | 0.3 | Diamond Coating | 10 | 8.5 | - | ||
MYR 251.07 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3310 | PFR100R03-SH | 7820254 | 2.6 | 0.3 | Coating | 10 | 8.5 | Reinforced cutting edge type | ||
MYR 251.07 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3225 | PFR100R03-ST | 7820204 | 2.6 | 0.3 | Coating | 10 | 8.5 | General Purpose | ||
MYR 703.67 | 10 Piece(s) | 4 Day(s) or more | Non-Ferrous Metal | XC4505 | PFR100R05-D | 7820304 | 2.6 | 0.5 | Diamond Coating | 10 | 8.5 | - | ||
MYR 251.07 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3310 | PFR100R05-SH | 7820255 | 2.6 | 0.5 | Coating | 10 | 8.5 | Reinforced cutting edge type | ||
MYR 251.07 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3225 | PFR100R05-ST | 7820205 | 2.6 | 0.5 | Coating | 10 | 8.5 | General Purpose | ||
MYR 703.67 | 10 Piece(s) | 4 Day(s) or more | Non-Ferrous Metal | XC4505 | PFR100R10-D | 7820305 | 2.6 | 1 | Diamond Coating | 10 | 8.5 | - | ||
MYR 251.07 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3310 | PFR100R10-SH | 7820256 | 2.6 | 1 | Coating | 10 | 8.5 | Reinforced cutting edge type | ||
MYR 251.07 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3225 | PFR100R10-ST | 7820206 | 2.6 | 1 | Coating | 10 | 8.5 | General Purpose | ||
MYR 251.07 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3310 | PFR100R20-SH | 7820257 | 2.6 | 2 | Coating | 10 | 8.5 | Reinforced cutting edge type | ||
MYR 251.07 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3225 | PFR100R20-ST | 7820207 | 2.6 | 2 | Coating | 10 | 8.5 | General Purpose | ||
MYR 278.26 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / High-Hardness Material | XP3310 | PFR110R03-SH | 7820406 | 2.6 | 0.3 | Coating | 11 | 8.5 | Reinforced cutting edge type | ||
MYR 278.26 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | XP3225 | PFR110R03-ST | 7820356 | 2.6 | 0.3 | Coating | 11 | 8.5 | General purpose type | ||
MYR 278.26 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / High-Hardness Material | XP3310 | PFR110R05-SH | 7820407 | 2.6 | 0.5 | Coating | 11 | 8.5 | Reinforced cutting edge type | ||
MYR 278.26 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | XP3225 | PFR110R05-ST | 7820357 | 2.6 | 0.5 | Coating | 11 | 8.5 | General purpose type | ||
MYR 278.26 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / High-Hardness Material | XP3310 | PFR110R10-SH | 7820408 | 2.6 | 1 | Coating | 11 | 8.5 | Reinforced cutting edge type | ||
MYR 278.26 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | XP3225 | PFR110R10-ST | 7820358 | 2.6 | 1 | Coating | 11 | 8.5 | General purpose type | ||
MYR 278.26 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / High-Hardness Material | XP3310 | PFR110R20-SH | 7820409 | 2.6 | 2 | Coating | 11 | 8.5 | Reinforced cutting edge type | ||
MYR 278.26 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | XP3225 | PFR110R20-ST | 7820359 | 2.6 | 2 | Coating | 11 | 8.5 | General purpose type | ||
MYR 769.05 | 10 Piece(s) | 4 Day(s) or more | Non-Ferrous Metal | XC4505 | PFR120R03-D | 7820306 | 3 | 0.3 | Diamond Coating | 12 | 10 | - | ||
MYR 263.73 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3310 | PFR120R03-SH | 7820258 | 3 | 0.3 | Coating | 12 | 10 | Reinforced cutting edge type | ||
MYR 263.73 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3225 | PFR120R03-ST | 7820208 | 3 | 0.3 | Coating | 12 | 10 | General Purpose | ||
MYR 769.05 | 10 Piece(s) | 4 Day(s) or more | Non-Ferrous Metal | XC4505 | PFR120R05-D | 7820307 | 3 | 0.5 | Diamond Coating | 12 | 10 | - | ||
MYR 263.73 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3310 | PFR120R05-SH | 7820259 | 3 | 0.5 | Coating | 12 | 10 | Reinforced cutting edge type | ||
MYR 263.73 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3225 | PFR120R05-ST | 7820209 | 3 | 0.5 | Coating | 12 | 10 | General Purpose | ||
MYR 263.73 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3310 | PFR120R10-SH | 7820260 | 3 | 1 | Coating | 12 | 10 | Reinforced cutting edge type | ||
MYR 263.73 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3225 | PFR120R10-ST | 7820210 | 3 | 1 | Coating | 12 | 10 | General Purpose | ||
MYR 263.73 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3310 | PFR120R20-SH | 7820261 | 3 | 2 | Coating | 12 | 10 | Reinforced cutting edge type | ||
MYR 263.73 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3225 | PFR120R20-ST | 7820211 | 3 | 2 | Coating | 12 | 10 | General Purpose | ||
MYR 263.73 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3310 | PFR120R30-SH | 7820262 | 3 | 3 | Coating | 12 | 10 | Reinforced cutting edge type | ||
MYR 263.73 | 1 Piece(s) | 5 Day(s) or more | Steel / Stainless Steel / Cast Iron | XP3225 | PFR120R30-ST | 7820212 | 3 | 3 | Coating | 12 | 10 | General Purpose | ||
MYR 287.15 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / High-Hardness Material | XP3310 | PFR130R03-SH | 7820410 | 3 | 0.3 | Coating | 13 | 10 | Reinforced cutting edge type | ||
MYR 287.15 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | XP3225 | PFR130R03-ST | 7820360 | 3 | 0.3 | Coating | 13 | 10 | General purpose type | ||
MYR 287.15 | 10 Piece(s) | 4 Day(s) or more | Steel / Stainless Steel / Cast Iron / High-Hardness Material | XP3310 | PFR130R05-SH | 7820411 | 3 | 0.5 | Coating | 13 | 10 | Reinforced cutting edge type |
Loading...
Basic Information
| Shape (First Character in Model Number) | Others | Number of Teeth | 2 |
|---|
Specification/Dimensions
-
Work Material
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous Metal
- Heat-Resistant Alloy, Titanium Alloy
- High-Hardness Material
-
Material Type
-
Nominal
- PFR060R03-D
- PFR060R03-SH
- PFR060R03-ST
- PFR060R05-D
- PFR060R05-SH
- PFR060R05-ST
- PFR060R10-D
- PFR060R10-SH
- PFR060R10-ST
- PFR070R03-SH
- PFR070R03-ST
- PFR070R05-SH
- PFR070R05-ST
- PFR070R10-SH
- PFR070R10-ST
- PFR080R03-D
- PFR080R03-SH
- PFR080R03-ST
- PFR080R05-D
- PFR080R05-SH
- PFR080R05-ST
- PFR080R10-D
- PFR080R10-SH
- PFR080R10-ST
- PFR080R20-SH
- PFR080R20-ST
- PFR100R03-D
- PFR100R03-SH
- PFR100R03-ST
- PFR100R05-D
- PFR100R05-SH
- PFR100R05-ST
- PFR100R10-D
- PFR100R10-SH
- PFR100R10-ST
- PFR100R20-SH
- PFR100R20-ST
- PFR110R03-SH
- PFR110R03-ST
- PFR110R05-SH
- PFR110R05-ST
- PFR110R10-SH
- PFR110R10-ST
- PFR110R20-SH
- PFR110R20-ST
- PFR120R03-D
- PFR120R03-SH
- PFR120R03-ST
- PFR120R05-D
- PFR120R05-SH
- PFR120R05-ST
- PFR120R10-SH
- PFR120R10-ST
- PFR120R20-SH
- PFR120R20-ST
- PFR120R30-SH
- PFR120R30-ST
- PFR130R03-SH
- PFR130R03-ST
- PFR130R05-SH
- PFR130R05-ST
- PFR130R10-SH
- PFR130R10-ST
- PFR130R20-SH
- PFR130R20-ST
- PFR160R03-D
- PFR160R03-SH
- PFR160R03-ST
- PFR160R05-D
- PFR160R05-SH
- PFR160R05-ST
- PFR160R10-D
- PFR160R10-SH
- PFR160R10-ST
- PFR160R20-SH
- PFR160R20-ST
- PFR160R30-SH
- PFR160R30-ST
- PFR170R03-SH
- PFR170R03-ST
- PFR170R05-SH
- PFR170R05-ST
- PFR170R10-SH
- PFR170R10-ST
- PFR170R20-SH
- PFR170R20-ST
- PFR200R03-D
- PFR200R03-SH
- PFR200R03-ST
- PFR200R05-D
- PFR200R05-SH
- PFR200R05-ST
- PFR200R10-D
- PFR200R10-SH
- PFR200R10-ST
- PFR200R20-SH
- PFR200R20-ST
- PFR200R30-SH
- PFR200R30-ST
- PFR210R03-SH
- PFR210R03-ST
- PFR210R05-SH
- PFR210R05-ST
- PFR210R10-SH
- PFR210R10-ST
- PFR210R20-SH
- PFR210R20-ST
- PFR250R03-SH
- PFR250R03-ST
- PFR250R05-SH
- PFR250R05-ST
- PFR250R10-SH
- PFR250R10-ST
- PFR250R20-SH
- PFR250R20-ST
- PFR250R30-SH
- PFR250R30-ST
- PFR260R03-SH
- PFR260R03-ST
- PFR260R05-SH
- PFR260R05-ST
- PFR260R10-SH
- PFR260R10-ST
- PFR260R20-SH
- PFR260R20-ST
- PFR300R03-SH
- PFR300R03-ST
- PFR300R05-SH
- PFR300R05-ST
- PFR300R10-SH
- PFR300R10-ST
- PFR300R20-SH
- PFR300R20-ST
- PFR300R30-SH
- PFR300R30-ST
- PFR320R03-SH
- PFR320R03-ST
- PFR320R05-SH
- PFR320R05-ST
- PFR320R10-SH
- PFR320R10-ST
- PFR320R20-SH
- PFR320R20-ST
- PFR320R30-SH
- PFR320R30-ST
-
type
- PFR-D
- PFR-SH
- PFR-ST
Days to Ship
-
- All
- 4 Day(s) or Less
- 5 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- SEC-Wave Mill For WGX Type Insert
- Used for SEC-Multi Mill, CHE model TEEN-TR
- Throw-Away Tip For FCM
- R Chipper ZPR-0203 Type Compatible Tip
- CoroMill 245 Wiper Tip
- Chip YPHW
- Insert for Phoenix Series Round Insert Cutter
- Phoenix Series 4 Corner Shoulder Cutter Insert
Customers Who Viewed This Item Also Viewed
-
PFR Phoenix Series Finishing Radius End MillOSG
Standard Price : MYR 664.65-
Days to Ship : 5 Day(s) or more
-
PFB Tip For Phoenix Series Finishing Ball End MillOSG
Standard Price : MYR 198.32-
Days to Ship : 5 Day(s) or more
-
NC Spot Drill / Corner Radius Cutter for 90°Nine9
Standard Price : MYR 817.25-
Days to Ship : 9 Day(s) or more
-
Undercutter DUM Type Compatible TipDIJET
Standard Price : MYR 88.52-
Days to Ship : 5 Day(s) or more
-
-
Die Jet Mill 45 SSE45 compatible tipDIJET
Standard Price : MYR 52.50-
Days to Ship : 5 Day(s) or more
-
-
Tip for Phoenix Head Replaceable Type Drill TEZDIJET
Standard Price : MYR 415.66-
Days to Ship : 5 Day(s) or more
-
Holder for Phoenix Head Replaceable Type Drill TEZD-MLDIJET
Standard Price : MYR 1,864.01-
Days to Ship : 5 Day(s) or more
-
Mirror Radius End Mill, RNM Type, Compatible Tip HRMDIJET
Standard Price : MYR 289.13-
Days to Ship : 10 Day(s) or more
-
-
Phoenix Head Interchangeable Drill PXD Head PXD-PCOSG
Standard Price : MYR 311.84-
Days to Ship : 5 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy