(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
ASPURE Latex Gloves II (Pure Pack)
- Standard Unit Price:
- -
- Days to Ship :
- 2 Day(s) or more
Thick cleanroom gloves with excellent workability which fit snugly to the fingertips. (Pure Pack)
[Features]
· Powder-free left/right dual type that's doubly packed for cleanrooms.
· Grip force corresponding to 3 types: non-embossed, fingertip embossed, fully embossed.
· Using natural rubber (NR) as the main raw material provides good elasticity and demonstrates high workability with excellent fit.
· Relatively resistant to organic solvents.
· Sterilized by washing with pure water. Uses double chlorination.
· ISOTOPE/2000 FDA510K CE standard compliant.
[Applications]
· Can be used for work in cleanrooms handling semiconductors or liquid crystal.
Basic Specifications
-
- Product Type
- Gloves
-
- Grade Standard (Fed.Std. 209D Class)
- 100
-
- Material
- Natural Rubber, Latex
-
- Specifications
- Powder Free
-
- Overall Length(mm)
- Approx. 300 (12 inches)
-
- Material Details
- Natural Rubber
-
- Other specifications
- Double Chlorination. For left and right. 2 layer packaging for clean room use. ISO9001/2000, FDA510K, CE compliant. Pure Pack (pure water washed, with controlled residual ion and particles).
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs.
The product list can be filtered using the selections found beneath the specification item name.
Product Specifications
What Is ASPURE?
These are a brand name of consumables to be used in a clean room that have been released by AS ONE Corporation.
Product development has been conducted to deliver products with performance equivalent to products the customer has used previously at a lower price in an effort to cut costs.
Glove Comparison Table
Nitrile
Latex
Gripping Force Evaluation
They have been evaluated using a gripping force measurement jig that has inclines of 30°, 60°, 75°, 90° and 105°.
The gloves are put on, and the side surface of the jig is grabbed using the thumb and index finger
While holding it, the jig is lifted up to the upper tip of the support pillar
The higher the inclination angle that the measurement jig is lifted to, the stronger the grip force.
- · ASPURE Nitrile Gloves Pro Grade High Grip Type (3-1730) can lift up to 90°.
- · ASPURE Nitrile Gloves II High Grip Type (1-4773/1-4769/1-2253) can lift up to 90°.
- · ASPURE Latex Gloves II High Grip Type (1-4776/1-3911/1-2255) can lift up to 30°.
*The High Grip Type is recommended for those looking for gloves with high gripping force.
About The Material Of The Gloves
· Latex gloves
Natural rubber (NR) is the main raw material. They have good elasticity and fit and are relatively resistant to organic solvents.
· Nitrile gloves
Synthetic rubber (NBR: nitrile butadiene rubber) is the main raw material. Despite not being as elastic as latex gloves, they have excellent oil and chemical resistance. They are appropriate for use in environments where generating dust is a concern, as they generate very little dust.
In addition, they are less likely to cause allergies compared to natural rubber.
· Seamless (welded) gloves
Gloves whose polyester fibers are coated with moisture permeable polyurethane and who have no seams joining the palm and back surfaces. They have excellent usability because the user will not tire easily, and the gloves are not prone to becoming stuffy, even during extended use.
· Sewn gloves
These are knit material gloves. They have excellent elasticity and sweat absorption, are quick-drying and are used as the underlayer of rubber gloves.
In addition, those that are coated with polyurethane have excellent gripping force and are used in a wide variety of applications, including assembly and logistics work.
About The Clean Room Standards
Clean room standards were previously established individually by each country, but even then the U.S Federal Standard Fed-Std-209 [pcs./1 ft3] established by the US was often used.
In this standard, cleanliness classes are shown according to the number of particles with a diameter of 0.5 μm or greater present in a cubic foot of air.
In Japan, the Japan Industrial Standard JIS B9920 was established in 1975, and an exponential index showing the number of microscopic particles present in a cubic meter of air in powers of 10 was set as the standard.
In recent years, with the progress of international standardization, ISO 14644-1 was established as the international standard in 1999, and even in Japan JIS B9920 was partially revised in 2002.
The cleanliness classes established in the current JIS B 9920 are as follows.
■ Maximum concentration of Japan JIS B9920 cleanliness classes (pcs./m3)
| Particle Diameter (μm) 1 | Cleanliness Class | |||||||
|---|---|---|---|---|---|---|---|---|
| Class 1 | Class 2 | Class 3 | Class 4 | Class 5 | Class 6 | Class 7 | Class 8 | |
| U.S. Federal Standard Corresponds To 209 | - | 1 | 10 | 100 | 1,000 | 10,000 | 100,000 | |
| 0.1 | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 |
| 0.2 | 2 | 24 | 236 | 2,360 | 23,600 | - | ||
| 0.3 | 1 | 10 | 101 | 1,010 | 10,100 | 101,000 | 1,010,000 | 10,100,000 |
| 0.5 | (0.35) | (3.5) | 35 | 350 | 3,500 | 35,000 | 350,000 | 3,500,000 |
| 5.0 | - | 29 | 290 | 2,900 | 29,000 | |||
| Particle Diameter Range | 0.1 to 0.3 | 0.1 to 0.5 | 0.1 to 5.0 | 0.3 to 0.5 | ||||
Category Of Wiper For Clean Room
| Microfiber Wiper (Ultra-Fine Fiber Wiper) | Polyester Long-Fiber Wiper | Nonwoven Wiper | |
|---|---|---|---|
| Class Guidelines | 100 | 100 | 1,000 to 10,000 |
It has excellent wiping functionality because the divided fibers catch oils and dirt on the wiped surface. | Wiper that is cheaply positioned between a nonwoven wiper and a microfiber wiper, is economical and can also be used in Class 100 clean rooms. | Dusting is poor compared to microfiber and polyester wipers, but it's inexpensive and can be used universally in a wide range of applications. | |
| Applications | Wiping liquid crystal displays, glass substrates for liquid crystals, color filters and camera lenses as well as wiping resins and metals before coating, etc. | It can also be used for machine cleaning in clean rooms because of its low cost in addition to its application as a microfiber wiper. | It is not limited to inside the clean room and can also be used for laboratories with ordinary environments, for cleaning factories and for wiping electric devices and components, etc., among other applications. |
Comparison Of Sterilization Methods
| γ-Ray Sterilization | Electron Beam Sterilization | EOG Sterilization | |
|---|---|---|---|
| Principle |
|
|
|
| Advantages |
|
|
|
| Disadvantages |
|
|
|
About The Mechanism Of Static Electricity
Static electricity is generated in everyday situations, but weak voltages at 1 kV or less are almost all unnoticed.
However, for production sites, it is also not rare that static electricity that cannot be felt at all by workers can cause defects or work problems.
Static electricity damage to electronic components, inferior printing or coating, malfunction of measurement devices, adhesion of foreign objects…and other problems that would seem to be unexpected occur frequently.
| Charging Potential Of The Human Body | Strength Of Electric Shock |
|---|---|
| 1.0 kV | Not felt at all |
| 2.0 kV | Felt on the outside of the fingers but does not hurt |
| 5.0 kV | Pain as if being pricked by needles is felt |
| 8.0 kV | Numbing feeling is felt from the palms up to the forearms |
| 10.0 kV | Pain and a feeling of current flow is felt on the whole hand |
| 12.0 kV | Strong feeling of being hit by a strong blow is felt on the entire hand |
Be Free From Restrictions In The Work Environment With A Cordless Strap.
1. Cordless Wrist Strap
A static electricity removal effect from the conductivity of potential differences is realized following the principles of physics related to the “corona” discharge effect and “tip” discharge. (Not appropriate for momentary destaticization.)
2. Foot Strap
- · The foot strap reinforces the static electricity removal effect by grounding the foot from direct skin contact.
- · The range of movement is not restricted as with wired wrist straps because the foot strap attached to the foot is grounded in cases where the floor has static electricity countermeasures.
In addition to using the cordless wrist strap on its own, a further static electricity removal effect is realized by using it with the foot strap.
About The Workings Of Destaticization
What should be done to prevent static electricity and bring back a stable production site?
When abrasion or peeling occurs, causing static electricity, objects tend to lean towards an electrically positive or negative polarity. This is the charged state.
If a charge with the opposite polarity is supplied to the electrically unbalanced object using "air ions", it can be electrically neutralized.
■ Destaticizers have two methods to turn air molecules into air ions.
| Light Irradiation Method | This is a method that uses X-rays that are even weaker than X-rays, which are called soft X-rays. It has a wide range and also allows destaticization even in a windless state, but management facilities and legal reporting are required to use X-rays. |
|---|---|
| Corona Method | This is a method using corona discharge. A method of applying high voltage to pointed-tip needle-like objects, called the voltage impression method, and a method that uses the static electricity of the object one wishes to destaticize, called the autodischarge method, are the methods for causing a corona discharge. Irradiation cannot be carried out like a soft X-ray, but it is often used at production sites because there is no need for facilities or reporting. |
Related Products
These are standard latex glove products. They have excellent usability because they are powder-free.
Fed. Std. 209D: Class 100
JIS ISO: Class 2
Price: JPY2,140 and up
Quaratec Gloves / Fully Embossed
These are a type that have been embossed on the entire surface of the fingers and palm to prevent slipping. For fine work and work for extended durations.
Fed. Std. 209D: Class 100
JIS ISO: Class 2
Price: JPY2,070
They do not cause the feeling of stuffiness or pressure specific to finger cots. Can be used repeatedly by being washed.
Fed. Std. 209D: Class 10,000
JIS ISO: Class 4
Price: JPY1,800
These are nitrile gloves treated with a special grip processing that are comfortable to use.
Fed. Std. 209D: Class 100
JIS ISO: Class 2
Price: JPY2,120
These are high-quality latex gloves that have low elution of heavy metals.
Fed. Std. 209D: Class 100
JIS ISO: Class 2
Price: JPY5,370
Specially manufactured for a smooth finish. This has clean pack specifications.
Fed. Std. 209D: Class 1,000
JIS ISO: Class 3
Price: JPY1,270
Additional Products in this Category
- Seamless Clean Gloves
- ASPURE Inner Gloves
- Latex Disposable NEO (100 Pcs)
- ASPURE Conductive Finger Cover (Roll Type)
- ASPURE PU Coat Gloves (Overlock Type)
- Anti-Static Gloves PU Processing (Long)
- Inner Gloves for Use in Cleanroom (Washable and Reusable)
- Low Dust Generation New Sewing Gloves (10 Pairs Included) MX100-M
Customers Who Viewed This Item Also Viewed
-
-
Solvent-Resistant Gloves Dailove 20DIA RUBBER
Standard Price : MYR 73.71-
Days to Ship : 4 Day(s) or more
-
-
-
CLEAN KNOLL Gloves (PVC powder-free)AS ONE
Standard Price : MYR 197.71-
Days to Ship : 2 Day(s) or more
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy