(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 23/2 to 7:00 (MYT) 24/2/2025. We apologize for the inconvenience.
  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

Precision Metal Cutter KCM-250B

Precision Metal Cutter KCM-250B

[Features]
· Greatly increases cutting capability.
· Easily cuts through thick materials by increasing the reduction ratio and increasing torque. Also cuts through stainless steel.
· Precision cutting without burrs or burns. No post-machining necessary.
· Clean cutting without dust, sparks, or smells.
· The chip remover uses our unique double roller method. Chips are removed from both sides of the saw blade, which prevents clogging and greatly increases cutting efficiency and saw blade life.

PDF

Part Number

Configured Part Number is shown.

KCM-250B

Configured Specifications

Voltage(V)Three-Phase 200Maximum Number of Load-Free Rotations(rpm)36/44
Power Consumption(W)400Constant Dimension Stopper(mm)0–500
Angle cutting(°)Left-Right 90-45Flange dimensionsP.C.Dφ66-10×4
Machine Dimensions(mm)485×670×720Coolant Pump Output (50/60 Hz)(W)40
Coolant Tank Capacity(L)Approx. 8Cutting FluidThe Exclusive Cutting Fluid for Use with This Machine Should Be Diluted About 20 Times with Water
AccessoryDedicated Cutting Fluid (1 L Container Included), Metal Saw 1 pc, Single End Wrench 24 mm, Hex Wrench 6 mm, Grounding 3P 20 A Plug 1 EachMass(kg)Approximately 95
Part Number
KCM-250B
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to Ship

MYR 31,667.44

1 Piece(s) 33 Day(s) or more
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to Ship
  1. 1

Basic Information

Voltage(V) Three-Phase 200 Maximum Number of Load-Free Rotations(rpm) 36/44 Power Consumption(W) 400
Constant Dimension Stopper(mm) 0–500 Angle cutting(°) Left-Right 90-45 Flange dimensions P.C.Dφ66-10×4
Machine Dimensions(mm) 485×670×720 Coolant Pump Output (50/60 Hz)(W) 40 Coolant Tank Capacity(L) Approx. 8
Cutting Fluid The Exclusive Cutting Fluid for Use with This Machine Should Be Diluted About 20 Times with Water Accessory Dedicated Cutting Fluid (1 L Container Included), Metal Saw 1 pc, Single End Wrench 24 mm, Hex Wrench 6 mm, Grounding 3P 20 A Plug 1 Each Mass(kg) Approximately 95

Please check the type/dimensions/specifications of the part KCM-250B in the Precision Metal Cutter KCM-250B series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)

Not a MISUMI customer yet? Register & enjoy 50% off your 1st order!* (*T&C apply.)

  • 7 Million Products
  • 2,000 Brands
  • Free CAD downloads
  • Quote/order any time