(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
MillQuad-Feed Series TXSW Type High-Feed Machining Cutter
[Features]
· Tool diameter: ⌀63 to 160 mm
· Bore type
Part Number
Configured Part Number is shown.
Product features and specifications
Basic specifications and features of the product
High feed cutter that realizes high versatility and outstanding high efficiency machining
- 2 types of inserts with different cutting edge angles can be attached to the same body
* ZER type and UER type cannot be mixed for machining.
High efficiency with multi-flute design
Excellent chatter resistance
Insert: SWMT0904ZER-MM
Work material: S55C
Cutting speed: Vc = 120 m/min
Cut: ap = 0.5 mm
Cutting width: ae = 32 mm
Number of flutes: Total flutes
Cutting oil agent: Dry type
Machine used: Bottom mount M/C, BT50
For machining with a long tool overhang of L/D = 8, the UER-MM type with a small cutting edge angle enables stable machining even with a multi-flute body of 7 flutes.
Achieves both low resistance and high stiffness with a hybrid design of positive cutting edge + negative restriction surface
- Securely holds the insert on the negative restriction surface
→High reliability to support heavy cutting
→Achieves high insert holding force without a locking wedge
Performance/test information
● Cutting performance
Comparison of tool lifespan
Insert: SWMT1506ZER-MM AH3135
: SWMT1506UER-MM AH3135
Work material: SUS630 (40HRC)
Cutting speed: Vc = 100 m/min
Feed per flute: fz = 0.6 mm/t
Cut: ap = 1 mm
Cutting width: ae = 45 mm
Number of flutes: 1-flute cutting
Cutting oil agent: Wet type
Machine used: Bottom mount M/C, BT50
The UER-MM type with a small cutting edge angle has 1.5 times longer lifespan by suppressing the rise in cutting heat.
Comparison of cutting force
Insert: SWMT1506ZER-MM AH3135
: SWMT1506UER-MM AH3135
Work material: S55C (180HB)
Cutting speed: Vc = 150 m/min
Feed per flute: fz = 2 mm/t
Cut: ap = 2 mm
Cutting width: ae = 50 mm
Number of flutes: 1-flute cutting
Cutting oil agent: Dry type
Machine used: Bottom mount M/C, BT50
With the ideal breaker design, the resistance is lower than that of other companies' products by up to about 20%.
Drawing
Usage method and usage examples
Usage Method
Machining form
| Part Number | DCX | Maximum cut APMX | Maximum Depth of drilling A | Maximum tilt angle RMPX | Maximum thrusting width W | Minimum Drilled hole diameter ⌀D1 | Maximum Drilled hole diameter ⌀D2 | Hole Enlarging Maximum Cutting Width ae |
|---|---|---|---|---|---|---|---|---|
| TXSW15M050B: | 50 | 2.5 | 0.7 | 4.8° | 14.5 | 70 | 95 | 36 |
| TXSW15M063B: | 63 | 2.5 | 0.7 | 2.9° | 14.5 | 96 | 121 | 49 |
| TXSW15J, M080B: | 80 | 2.5 | 0.7 | 2° | 14.5 | 130 | 155 | 66 |
| TXSW15J, M100B: | 100 | 2.5 | 0.7 | 1.4° | 14.5 | 170 | 195 | 86 |
| TXSW15J, M125B: | 125 | 2.5 | 0.7 | 1° | 14.5 | 220 | 245 | 111 |
| TXSW15J, M160B: | 160 | 2.5 | 0.7 | 0.7° | 14.5 | 290 | 315 | 146 |
Recommended cutting conditions
Recommended cutting condition table
Compatible work material
★: First choice/☆: Second choice/●: Setting item
Selection support information
High feed machining
Icon list
Part
* Recommended tightening torque (N⋅m): TS50115I=5
| Part Number |
|---|
| TXSW09M040B16.0R05 |
| TXSW09M050B22.0R07 |
| TXSW15M050B22.0R03 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Machining Application | work material | Mounting Method | Dimension φDc (mm) | Dimensions LF (mm) | Compatible Insert | Size B (mm) | Dimension φDc1 (mm) | Dimension φDc2 (mm) | Dimension DCSFMS | Dimension CBDP (mm) | Dimensions DCX (mm) | Dimension DCONMS (mm) | Dimension DCONXS (mm) | Dimensions KWW (mm) | Cutter Tightening Bolt | Cutting item count (CICT) | Depth of cut maximum (APMX) (mm) | Depth of cut maximum (APMX2) (mm) | Tool cutting edge angle 2 | Master insert identification (MIID) (mm) | Master insert identification (MIID2) (2D/3D) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 2,612.06 | 1 Piece(s) | 9 Day(s) | - | - | - | 25 | 40 | - | 5.6 | - | 24 | 38 | 18 | 40 | 16 | - | 8.4 | - | 5 | 1.5 | 1 | 12, 7 | SWMT0904ZER-MM | SWMT0904UER-MM | ||
MYR 3,202.93 | 1 Piece(s) | 9 Day(s) | - | - | - | 35 | 50 | - | 6.3 | - | 34 | 47 | 20 | 50 | 22 | - | 10.4 | - | 5 | 1.5 | 1 | 12, 7 | SWMT0904ZER-MM | SWMT0904UER-MM | ||
MYR 2,441.06 | 1 Piece(s) | 9 Day(s) | Flat Surface / Thrust (Z-Feed) / Inclined Cutting | General Steel / Heat-Treated Steel / High-Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | Arbor | 24.1 | - | SWMT15** | - | 24.1 | 22.2 | 47 | 20 | - | - | 22 | 10.4 | SRPS118-0273 | - | - | - | - | - | 2D／3D |
Loading...
Basic Information
| Air Hole | Yes |
|---|
Specification/Dimensions
-
Machining Application
- Flat Surface
- Thrust (Z-Feed)
- Inclined Cutting
-
work material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
-
Mounting Method
- Arbor
-
Dimension φDc(mm)
-
Dimensions LF(mm)
-
Compatible Insert
- SWMT15**
-
Size B(mm)
-
Dimension φDc1(mm)
-
Dimension φDc2(mm)
-
Dimension DCSFMS
- 38
- 47
-
Dimension CBDP(mm)
- 18
- 20
-
Dimensions DCX(mm)
- 40
- 50
-
Dimension DCONMS(mm)
-
Dimension DCONXS(mm)
-
Dimensions KWW(mm)
- 8.4
- 10.4
-
type
- TXSW
Days to Ship
-
- All
- 9 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- SEC-Ace Mill, DPGF4000 Type
- SEC-Wave Mill Head WEX2000M Type
- Used for SEC-Wave Mill, WGC Model WGCF-R
- Side Cutter, Milling Cutter, Front Face Milling Cutter
- CoroMill 331 Full Side Cutter, Machining Width: 12.0-26.5 mm 331.32
- Multi-Functional Tool CoroPlex MT, For Turning & Milling On Multi-Task Machines
- MFH-Type Ultra-Small Diameter High Feed Cutter MFH Micro End Mill
- SEC-Sumi Dual Mill, DFC09000R (S) Type (Standard Type)
Customers Who Viewed This Item Also Viewed
-
Hose Ferrule (SS) SR-04 Parallel Female Screw for HosesSHIMIZU MANUFACTURING
Standard Price : MYR 40.62-
Days to Ship : 7 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy