(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Kindly be informed that it will be peak period in conjunction with the Chinese New Year festive season. Delivery pickup upon 25 January 2025 estimated would arrive after CNY holidays. Please expect slight delay for orders shipped during this peak season and we thank you for your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Anti-Vibration Stub Carbide End Mill_AE-VMSS
[Features]
· The DUARISE coating offers excellent lubrication, wear resistance and high-temperature oxidation resistance. The composite multilayer structure helps prevent thermal cracking. Also, the smoothing of the coating surface improves machining surface precision.
The positive-angle flute has excellent sharpness and helps reduce cutting resistance. The new flute form achieves both high tool rigidity and a good chip discharge performance, enabling stable machining and reduced burring.
Use of a variable-lead geometry and unequal divisions enables stable, high-efficiency machining.
(i)Caution
- Use rigid, high-precision products for machinery and holders. Adjust the rotation speed and feed rate according to the usage conditions (workpiece retaining strength, machinery rigidity etc.) Use a low-smoking cutting oil that is also suitable for the work material. For dry-type milling, remove the chips using an air blower so that they do not clog the hole. When milling stainless steel, it is recommended to use water-soluble cutting oil. For precision machining, reduce the rotation speed, feed rate and cutting depth.
Part Number
Configured Part Number is shown.
The difference is clearly shown in the quality of slot milling!
There are hardly any burrs generated during slot milling, which is a proof of stable milling.
Poor chip evacuation and excessive cutting force are the main causes of unstable milling, which leads to the generation of burrs.
The AE-VMS is able to achieve stable performance with minimal burrs even in slot milling at a depth of 10mm.
Stable Performance
Low Cutting Force
• Sharp positive rake angle reduces cutting force.
• New flute form with high tool rigidity and excellent chip evacuation properties enables stable milling and the suppression of burrs.
10% lower cutting force versus the competitors
High Efficiency
Suppression of Vibration
Unequal spacing of teeth and variable-lead geometry enables stable and high efficiency milling
Superior Surface Quality
DUARISE Coating
high oxidation temperature.
Multi-layer construction minimizes the thermal cracks that often
occurred while using water soluble oil.
• Smoothing surface coating treatment made an excellent quality
of surface finishing.
Cutting Data
Suppression of Heat Generation
Suppression of cutting heat generation minimizes tool wear
Surface roughness after milling 11.2m
Tool condition after milling 156.8m
Stable Performance
Normal wear with no chipping even in slot milling
Stable Performance
Stable performance even in slotting
Wear comparison after milling 68.6m
High Efficiency
Trouble-free chip evacuation even in high-speed slotting
Long Tool Life
DUARISE coating enables consistent tool wear
Wear comparison after milling 196m
Deep Side Milling
Great surface finish with no chattering
Product Introduction
| Part Number |
|---|
| AE-VMSS3 |
| AE-VMSS3.5 |
| AE-VMSS4 |
| AE-VMSS4.5 |
| AE-VMSS5 |
| AE-VMSS5.5 |
| AE-VMSS6 |
| AE-VMSS6.5 |
| AE-VMSS7 |
| AE-VMSS7.5 |
| AE-VMSS8 |
| AE-VMSS8.5 |
| AE-VMSS9 |
| AE-VMSS9.5 |
| AE-VMSS10 |
| AE-VMSS10.5 |
| AE-VMSS11 |
| AE-VMSS11.5 |
| AE-VMSS12 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Blade diameter (D) (φ) | Blade length (ℓ) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | Tool No. |
|---|---|---|---|---|---|---|---|---|---|
MYR 120.42 | 1 Piece(s) | 14 Day(s) or more | 3 | 4.5 | 6 | 45 | 8556430 | ||
MYR 176.03 | 1 Piece(s) | 5 Day(s) or more | 3.5 | 5.3 | 6 | 45 | 8556435 | ||
MYR 137.72 | 1 Piece(s) | 5 Day(s) or more | 4 | 6 | 6 | 45 | 8556440 | ||
MYR 201.11 | 1 Piece(s) | 5 Day(s) or more | 4.5 | 6.8 | 6 | 45 | 8556445 | ||
MYR 137.72 | 1 Piece(s) | 5 Day(s) or more | 5 | 7.5 | 6 | 45 | 8556450 | ||
MYR 201.11 | 1 Piece(s) | 5 Day(s) or more | 5.5 | 8.3 | 6 | 45 | 8556455 | ||
MYR 159.16 | 1 Piece(s) | 14 Day(s) or more | 6 | 9 | 6 | 45 | 8556460 | ||
MYR 232.08 | 1 Piece(s) | 4 Day(s) or more | 6.5 | 9.8 | 8 | 60 | 8556465 | ||
MYR 232.08 | 1 Piece(s) | 4 Day(s) or more | 7 | 10.5 | 8 | 60 | 8556470 | ||
MYR 342.39 | 1 Piece(s) | 4 Day(s) or more | 7.5 | 11.3 | 8 | 60 | 8556475 | ||
MYR 283.57 | 1 Piece(s) | 5 Day(s) or more | 8 | 12 | 8 | 60 | 8556480 | ||
MYR 419.88 | 1 Piece(s) | 5 Day(s) or more | 8.5 | 12.8 | 10 | 70 | 8556485 | ||
MYR 395.65 | 1 Piece(s) | 4 Day(s) or more | 9 | 13.5 | 10 | 70 | 8556490 | ||
MYR 593.92 | 1 Piece(s) | 4 Day(s) or more | 9.5 | 14.3 | 10 | 70 | 8556495 | ||
MYR 376.07 | 1 Piece(s) | 4 Day(s) or more | 10 | 15 | 10 | 70 | 8556500 | ||
MYR 598.47 | 1 Piece(s) | 4 Day(s) or more | 10.5 | 15.8 | 12 | 75 | 8556505 | ||
MYR 520.99 | 1 Piece(s) | 4 Day(s) or more | 11 | 16.5 | 12 | 75 | 8556510 | ||
MYR 598.47 | 1 Piece(s) | 4 Day(s) or more | 11.5 | 17.3 | 12 | 75 | 8556515 | ||
MYR 470.86 | 1 Piece(s) | 5 Day(s) or more | 12 | 18 | 12 | 75 | 8556520 |
Loading...
Basic Information
| work material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | Number of flutes(sheet) | 4 | Type | Square |
|---|---|---|---|---|---|
| Machining Application | Side Surface / Groove / Inclined Cutting | Torsion Angle (θ) | Uneven Lead | Helix Angle 2 | 37 to 40° |
| Coating ② | DUARISE coating | Flute Diameter Tolerance(mm) | 0 to -0.02 |
Specification/Dimensions
-
Blade diameter (D)(φ)
-
Blade length (ℓ)(mm)
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Tool No.
-
type
- AE-VMSS
Days to Ship
-
- All
- 4 Day(s) or Less
- 5 Day(s) or Less
- 14 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Carbide Blade Neck Relief End Mill, 2-Flute / Short Model
- VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)
- GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D
- Regular Grain Carbide End Mills 3 Flutes Multi-Purpose for Copper and Aluminum Alloys_CA-MFE
- Ultra-Fine Machining End Mill Micro Edge MSME100
- MX440 MUGEN-COATING 4-Flute LEAD 40 End Mill
- MUGEN-COATING PREMIUM 2-Flute LEAD 35 End Mill MXH235
- Carbide Graphite Solid End Mill 4-Flute, Long Type
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy