(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that some of the items may take longer lead time to ship due to Japan New Year holidays (29-Dec-2024 to 5-Jan-2025). Early order placement is recommended. We apologize for the inconvenience caused and appreciate your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Phoenix Series, Insert for 6-Corner Shoulder Milling Cutter, PSTW (TNKU120608ER-GM-XP1020)
[Features]
· Due to a positive rake angle with low resistance, as well as a thickness that increases rigidity, it is resistant to chatter vibration and supports machining with long protrusions
· Economical specifications with 3 corners on front and back (6 corners in total on both sides)
· Insert variation according to processing application
(i)Caution
- For some items, the data for CAD and CAM / tool management software may not be available when you wish to download them. In that case, please use the download button after selecting the data in the "CAD data" item (2D/3D) or "CAM / tool management software data" under the narrowing down conditions.
Part Number
Configured Part Number is shown.
TNKU120608ER-GM-XP1020
Product features and specifications
Basic specifications and features of the product
Double-sided 6-corner (90°) insert
- Achieves an excellent finished surface with a wiper edge
Excellent machined surface roughness
| Tools to use | PSTW12R050M22-4 (φ50 × 4 flutes) |
|---|---|
| Insert used (grade) | TNKU120608ER-GM (XP3035) |
| Work material | S50C |
| Cutting speed | 200 m/minute (1,274 minutes^-1) |
| Feed speed | 510 mm/minute (0.1 mm/t) |
| Depth of cut | ap = 0.2 mm, ae = 32 mm |
| Cutting Oil | N/A (air blow) |
| Machine used | Horizontal machining center (BT50) |
Bottom roughness
High efficiency even in machining with long protrusions
| Tools to use | PSTW12R050M22-4 (φ50 × 4 flutes) | Other companies' shoulder milling positive cutter (φ50 × 5 flutes) |
|---|---|---|
| Insert used (grade) | TNKU120608ER-GM (XP3035) | Carbide coating insert |
| Work material | S50C | |
| Cutting speed | Groove machining | |
| Depth of cut | ap = 3 mm, ae = 50 mm | |
| Protrusion length | 190 mm (3.8D) | |
| Cutting Oil | N/A (air blow) | |
| Machine used | Horizontal machining center (BT50) | |
Movable area
Performance/test information
S50C long lifespan machining
It has excellent abrasion resistance compared to other manufacturers' products, and has approx. 4.5 times the durability.
| Tools to use | PSTW09R025SS25-3S (φ25 × 3 flutes) | Products made by other manufacturers (φ25 × 3 flutes) |
|---|---|---|
| Insert used (grade) | TNKU090604ER-GM (XP3035) | Carbide coating insert |
| Work material | S50C | |
| Cutting speed | 180 m/minute (2,290 minutes^-1) | |
| Feed speed | 825 mm/minute (0.12 mm/t) | |
| Depth of cut | ap = 2 mm, ae = 16 mm | |
| Cutting Oil | N/A (air blow) | |
| Machine used | Vertical machining center (BT40) | |
Cutting length
"Photograph when processing 7 m" PSTW / other company's product
SUS304 long lifespan machining
Processing was done up to 10.5 m, which was approx. 1.5 times the durability limit of other companies' products, but the insert was in a state where continuous processing was possible without chipping.
| Tools to use | PSTW09R025SS25-3S (φ25 × 3 flutes) | Products made by other manufacturers (φ25 × 3 flutes) |
|---|---|---|
| Insert used (grade) | TNKU090604ER-GL (XP2040) | Carbide coating insert |
| Work material | SUS304 | |
| Cutting speed | 150 m/minute (1,910 minutes-^1) | |
| Feed speed | 460 mm/minute (0.08 mm/t) | |
| Depth of cut | ap = 1.5 mm, ae = 16 mm | |
| Cutting Oil | N/A (air blow) | |
| Machine used | Vertical machining center (BT40) | |
Cutting length
"Photograph when processing 7 m" PSTW / other company's product
High-precision machining of the slide surface of the press mold structure
In the side finishing process, the required accuracy of a tilt amount of 10 µm or less was satisfied, and good machined surface accuracy was obtained.
| Tools to use | PSTW12R050M22-4 (φ50 × 4 flutes) |
|---|---|
| Insert used (grade) | TNKU120608ER-GR (XP1020) |
| Work material | FCD500 |
| Cutting speed | 300 m/minute (1,910 minutes^-1) |
| Feed speed | 1,700 mm/minute (0.2 mm/t) |
| Depth of cut | ap = 0.5 mm, ae = 0.3 mm |
| Protrusion length | 240 mm |
| Cutting Oil | N/A (air blow) |
| Machine used | Double-column machining center (BT50) |
Side roughness
Processed surface
High efficiency processing of SUS304
With other companies' products, chatter vibration occurred when the depth of cut (ap) increased, and efficiency could no be improved. In addition, burrs also occurred. PSTW had 1 flute less, but highly efficient machining was possible with an efficiency UP by 67%.
| Tools to use | PSTW12R050M22-4 (φ50 × 4 flutes) | Other companies' shoulder milling positive cutter (φ50 × 5 flutes) |
|---|---|---|
| Insert used (grade) | TNKU120608ER-GL (XP2040) | Carbide coating insert |
| Work material | SUS304 | |
| Cutting speed | 150 m/minute (955 minutes^-1) | |
| Feed speed | 700 mm/minute (0.18 mm/t) | 700 mm/minute (0.15 mm/t) |
| Depth of cut | ap = 5 mm, ae = 35 mm | ap = 3 mm, ae = 35 mm |
| Cutting Oil | Water-soluble cutting oil | |
| Machine used | Double-column machining center (BT50) | |
PSTW: burr generation (small) / other company's product: burr generation (large)
Roughing of construction machine control valve
As a result of comparison with other companies' products, it was excellent in abrasion resistance. In particular, the progress of wear at the cut boundary was suppressed, and the durability was increased by approx. 3.5 times.
| Tools to use | PSTW12R063M22-5 (φ63 × 5 flutes) | Other companies' shoulder milling negative cutter (φ63 × 5 flutes) |
|---|---|---|
| Insert used (grade) | TNKU120608ER-GR (XP1020) | Carbide coating insert |
| Work material | FCD500 | |
| Cutting speed | 180 m/minute (910 minutes^-1) | |
| Feed speed | 1,000 mm/minute (0.22 mm/t) | |
| Depth of cut | ap = 3 mm, ae = 45 mm | |
| Cutting Oil | N/A (air blow) | |
| Machine used | Horizontal machining center (BT50) | |
Cutting length
"Photograph when processing 17 m" PSTW / other company's product
Long lifespan machining of Ti-6Al-4 V
In other companies' products (front and back 3-corner specifications), wear progressed and chipping occurred at an early stage. With PSTW (XC5040), it was possible to improve durability by suppressing wear.
| Tools to use | PSTW12R050M22-4 (φ50 × 4 flutes) | Other companies' shoulder milling negative cutters A and B (φ50 × 4 flutes) |
|---|---|---|
| Insert used (grade) | TNKU120608ER-SM (XC5040) | Carbide coating insert |
| Work material | Ti-6Al-4 V | |
| Cutting speed | 40 m/minute (255 minutes^-1) | |
| Feed speed | 82 mm/minute (0.08 mm/t) | |
| Depth of cut | ap = 1.5 mm, ae = 20 mm | |
| Cutting Oil | N/A (air blow) | |
| Machine used | Horizontal machining center (BT50) | |
Cutting length
PSTW (at the time of 4 m processing) / other company's product A (at the time of 2 m processing)
Highly efficient stable machining with tool runout of 300 mm (5D)
In machining with a long protrusion of L/D = 5, highly efficient machining was possible compared to other companies' products.
In addition, other companies' products had poor chamfer to the workpiece due to insufficient sharpness and chatter vibration occurred in the low rotation range (lined area on graph).
With excellent sharpness, PSTW was capable of stable processing even in the low rotation range.
| Tools to use | PSTW12R063M22-5 (φ63 × 5 flutes) | Other companies' shoulder milling negative cutter (φ63 × 4 flutes) |
|---|---|---|
| Insert used (grade) | TNKU120608ER-GM (XC3030) | Carbide coating insert |
| Work material | FC250 | |
| Depth of cut | ap = 2 mm, ae = 44 mm | |
| Protrusion length | 300 mm (5D) | |
| Cutting Oil | N/A (air blow) | |
| Machine used | Horizontal machining center (BT50) | |
Movable area
Drawing
Recommended cutting conditions
Recommended cutting condition table
Precautions for cutting conditions
The values in the recommended cutting condition table show general values at actual cutting speed. Please adjust appropriately according to the cutting environment.
Compatible work material
Recommended material for each work material
◎: First recommended material, O: Second recommended material
NM: for aluminum alloy, GL: for light cutting, GM: for medium cutting, GR: for heavy cutting, SM: for heat-resistant alloys
Selection support information
Insert variation according to machining application
PSTW SS (6-corner shoulder milling cutter, straight shank type)
Type 1
With oil hole
Type 2
With oil hole
| Tool No. | Nominal | Outer diameter DC | Number of flutes ZEEP | Shank diameter DCON | Overall length LF | Body length LH | APMX | Weight (kg) | Compatible insert | Shape type |
|---|---|---|---|---|---|---|---|---|---|---|
| 7803014 | PSTW09R025SS25-2S | 25 | 2 | 25 | 120 | 35 | 9 | 0.41 | (1) | 1 |
| 7803015 | PSTW09R025SS25-2L | 25 | 2 | 25 | 170 | 70 | 9 | 0.58 | 1 | |
| 7803016 | PSTW09R025SS25-3S | 25 | 3 | 25 | 120 | 35 | 9 | 0.4 | 1 | |
| 7803017 | PSTW09R026SS25-2L | ★26 | 2 | 25 | 170 | 35 | 9 | 0.59 | 2 | |
| 7803018 | PSTW09R028SS25-2L | ★28 | 2 | 25 | 170 | 35 | 9 | 0.6 | 2 | |
| 7803019 | PSTW09R028SS25-3S | ★28 | 3 | 25 | 120 | 35 | 9 | 0.41 | 2 | |
| 7803020 | PSTW09R030SS32-2L | 30 | 2 | 32 | 190 | 90 | 9 | 1.02 | 1 | |
| 7803021 | PSTW09R030SS32-3S | 30 | 3 | 32 | 130 | 45 | 9 | 0.7 | 1 | |
| 7803022 | PSTW09R032SS32-3S | 32 | 3 | 32 | 130 | 45 | 9 | 0.74 | 1 | |
| 7803023 | PSTW09R032SS32-3L | 32 | 3 | 32 | 190 | 45 | 9 | 1.1 | 1 | |
| 7803024 | PSTW09R032SS32-4S | 32 | 4 | 32 | 125 | 40 | 9 | 0.7 | 1 | |
| 7803025 | PSTW09R033SS32-3L | ★33 | 3 | 32 | 190 | 35 | 9 | 1.1 | 2 | |
| 7803026 | PSTW09R035SS32-3L | ★35 | 3 | 32 | 190 | 35 | 9 | 1.12 | 2 | |
| 7803027 | PSTW09R035SS32-4S | ★35 | 4 | 32 | 130 | 35 | 9 | 0.75 | 2 | |
| 7803028 | PSTW09R040SS32-4S | 40 | 4 | 32 | 140 | 50 | 9 | 0.85 | 2 | |
| 7803029 | PSTW09R040SS32-4L | 40 | 4 | 32 | 190 | 45 | 9 | 1.15 | 2 | |
| 7803030 | PSTW09R040SS32-5S | 40 | 5 | 32 | 140 | 50 | 9 | 0.84 | 2 |
★: Thick flute type
(1) is equivalent to the compatible insert number in the parts table.
PSTW BORE (6-corner shoulder milling cutter, bore type)
Type 1
Power screw specification / with lubrication hole
Type 2
With oil hole
Type 3
Without oil hole
| Tool No. | Nominal | Outer diameter DC | Number of flutes ZEEP | Cutter height LF | Boss diameter DCSFMS | Hole diameter DCON | Flange keyway | APMX | Weight (kg) | Compatible insert | Shape Type | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Width KWW | Depth b | |||||||||||
| 7803031 | PSTW09R040M16-4 | 40 | 4 | 40 | 38 | 16 | 8.4 | 5.6 | 9 | 0.23 | (1) | 2 |
| 7803032 | PSTW09R040M16-5 | 40 | 5 | 40 | 38 | 16 | 8.4 | 5.6 | 9 | 0.23 | 2 | |
| 7803033 | PSTW09R050M22-4 | 50 | 4 | 40 | 45 | 22 | 10.4 | 6.3 | 9 | 0.33 | 2 | |
| 7803034 | PSTW09R050M22-6 | 50 | 6 | 40 | 45 | 22 | 10.4 | 6.3 | 9 | 0.32 | 2 | |
| 7803035 | PSTW09R063M22-5 | 63 | 5 | 40 | 50 | 22 | 10.4 | 6.3 | 9 | 0.52 | 2 | |
| 7803036 | PSTW09R063M22-7 | 63 | 7 | 40 | 50 | 22 | 10.4 | 6.3 | 9 | 0.52 | 2 | |
| 7803100 | PSTW12R050M22-3 | 50 | 3 | 40 | 45 | 22 | 10.4 | 6.3 | 12 | 0.3 | (2) | 1 |
| 7803101 | PSTW12R050M22-4 | 50 | 4 | 40 | 45 | 22 | 10.4 | 6.3 | 12 | 0.3 | 1 | |
| 7803102 | PSTW12R063M22-3 | 63 | 3 | 40 | 50 | 22 | 10.4 | 6.3 | 12 | 0.48 | 2 | |
| 7803103 | PSTW12R063M22-5 | 63 | 5 | 40 | 50 | 22 | 10.4 | 6.3 | 12 | 0.46 | 2 | |
| 7803104 | PSTW12R080M25.4-5 | 80 | 5 | 50 | 60 | 25.4 | 9.5 | 6 | 12 | 1.08 | 2 | |
| 7803110 | PSTW12R080M27-5 | 80 | 5 | 50 | 60 | 27 | 12.4 | 7 | 12 | 1.07 | 2 | |
| 7803105 | PSTW12R080M25.4-6 | 80 | 6 | 50 | 60 | 25.4 | 9.5 | 6 | 12 | 1.06 | 2 | |
| 7803111 | PSTW12R080M27-6 | 80 | 6 | 50 | 60 | 27 | 12.4 | 7 | 12 | 1.04 | 2 | |
| 7803106 | PSTW12R100M31.7-5 | 100 | 5 | 50 | 70 | 31.75 | 12.7 | 8 | 12 | 1.5 | 3 | |
| 7803112 | PSTW12R100M32-5 | 100 | 5 | 50 | 70 | 32 | 14.4 | 8 | 12 | 1.57 | 2 | |
| 7803107 | PSTW12R100M31.7-7 | 100 | 7 | 50 | 70 | 31.75 | 12.7 | 8 | 12 | 1.5 | 3 | |
| 7803113 | PSTW12R100M32-7 | 100 | 7 | 50 | 70 | 32 | 14.4 | 8 | 12 | 1.56 | 2 | |
| 7803108 | PSTW12R125M38.1-7 | 125 | 7 | 63 | 90 | 38.1 | 15.9 | 10 | 12 | 3.03 | 3 | |
| 7803114 | PSTW12R125M40-7 | 125 | 7 | 63 | 90 | 40 | 16.4 | 9 | 12 | 2.96 | 2 | |
| 7803109 | PSTW12R125M38.1-9 | 125 | 9 | 63 | 90 | 38.1 | 15.9 | 10 | 12 | 3.01 | 3 | |
| 7803115 | PSTW12R125M40-9 | 125 | 9 | 63 | 90 | 40 | 16.4 | 9 | 12 | 2.93 | 2 | |
(1) and (2) are equivalent to the compatible insert numbers in the parts table.
Part
Please purchase the wrench separately.
| Part Number |
|---|
| TNKU120608ER-GM-XP1020 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Work Material | Material Type | Nominal | d (mm) | s (mm) | Tool No | R (mm) | Sub Blade B (mm) | Availability of CAD Data (2D/3D) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 118.62 | 10 Piece(s) | 5 Day(s) or more | Cast Iron | XP1020 | TNKU120608ER-GM | 10.8 | 6.55 | 7821088 | 0.8 | 1.5 | 2D/3D |
Loading...
Basic Information
| Shape (First Character in Model Number) | T (Triangular) | Clearance Angle | N (0°) | Number of Teeth | 6 |
|---|
Specification/Dimensions
-
type
- TNKU
-
Work Material
- Steel
- Stainless Steel
- Cast Iron
-
Material Type
-
Nominal
-
d(mm)
- 7.46
- 10.8
-
s(mm)
- 4.64
- 6.55
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 5 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Used for SEC-Sumi Dual Mill, DGC Model ONMT05T6ANER-L
- CoroMill 390 Tip
- CoroMill 690 End Cutting Edge Tip
- Wiper Insert For CoroMill 345 - PW5, KW5PW8, KW8
- Kyocera Insert for Milling, Cermet TN100M
- Kyocera Milling Tip CA6535 CVD Coating
- Tungsten Alloy TAC Drill Insert
- WAVY MILL NWEX3000F/R WAVY MILL NWEXF3000R NEW Chip
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy