(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 9/2/2025 to 7:00 (MYT) 10/2/2025. We apologize for the inconvenience.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Carbide Ball End Mills（work material：Quenched and tempered steel Page2）
[What is a carbide ball end mill?]
A type of milling cutter. An end mill characterized by a bottom flute with a spherical (round) cutting edge, mainly used for cutting free-form surface shapes. Its main role is cutting molded parts. Due to the spherical cutting edge, it has features that can support various machining shapes.
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
X's Mill Geo Ball Long Shank 2GEOLSR
NACHI(FUJIKOSHI)
[Features]
A carbide end mill with 2 flutes.
The high cutting speed and high production efficiency lead to overall production cost reduction.
The long shank allows contouring at deep positions and can be lengthened to suit the application.
[Applications]
Suitable for side milling, curved surface milling, engraving, and R-grooving.Standard Price: MYR 422.04- Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
·CBN ball end mill.
·Suitable for high-speed finishing of high-hardness material dies.Standard Price: MYR 1,716.88- Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for processing of curved surfaces.
Standard Price: MYR 458.51 Days to Ship: 9 Day(s) or more -
NACHI(FUJIKOSHI)
Ideal for precision mold polish-free machining. Rounding accuracy: ±3 μm, rounding accuracy range: 180°
Standard Price: MYR 957.57- Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
Supports a wide range of applications from mold steel to high-hardness steel. Ideal for finishing molds.
Standard Price: MYR 361.52- Days to Ship: 5 Day(s) or more -
Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6
OSG
Super ultra-fine particle carbide alloy and high rigidity pencil neck achieves high speeds, high precision, and a super long life. Also eliminates chattering problems inherent in fine shape processing and carving.
Standard Price: MYR 602.44- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FX-MG-EBD-3
OSG
A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.
Coated for steel
Standard/Alteration category: Manufacturer's standard product
Number of flutes (pcs.) 2
Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)
R Accuracy (µm) ±10Standard Price: MYR 499.80- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute MG-EBD-3
OSG
Uses high-toughness carbide with high transverse rupture strength.
Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)Standard Price: MYR 382.14- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute CBN-EBD
OSG
2-Flute Ball End Type CBN-EBD
·Demonstrates high performance in machining high-rigid materials and cast iron
·With a wide variety of lineup of CBN tools, you can select one of the best tool for your application.Standard Price: MYR 1,842.06- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute CBN-SXB
OSG
Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide
Standard Price: MYR 985.37- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FX-MG-EBD
OSG
Machining is possible with a wide range of materials, from general materials to hardened steel. Also usable with high-speed machining center.
Standard Price: MYR 551.46- Days to Ship: 5 Day(s) or more -
OSG
High toughness carbide alloy is used, providing a long service life at medium to low speeds
Standard Price: MYR 1,940.39- Days to Ship: 5 Day(s) or more -
OSG
A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.
Standard Price: MYR 198.96 Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute WXS-EBD
OSG
Ultra-heat-resistant, ultra-hard WX super coated high precision ball end mill. Ideal for high-speed direct engraving of hardened steel as well as, of course, high-speed general steel machining.
Standard Price: MYR 173.22- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute WXL-HS-EBD
OSG
WXL coating has excellent lubrication and resistance to wear. Can be used for a wide range of work materials and cutting areas
Standard Price: MYR 105.63- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FX-EBD-6
OSG
High-precision ball end mill for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers. Super ultra-fine particle carbide base metal realizes long life for hardened steel high-speed machining.
Standard Price: MYR 527.83- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 720.77 Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute for Heavy Cutting FX-HS-EBDS
OSG
Ball end mill for heavy cutting that enables high speed and high efficiency (large cutting depth). Short overall length which fits shrink-fit and HSK types perfectly.
Standard Price: MYR 518.46- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute WXE-HS-EBD
OSG
Ultra-high grade accuracy and precision ball end mill series for better craftsmanship. Short length that perfectly fits the HSK shrink holder. The product accuracy warranty sheet is included for HP3 specification types.
Standard Price: MYR 685.75 Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FX-HO-MG-EBD
OSG
The oil hole shows its true performance when drilling deep holes where chip discharge can be problematic.
Standard Price: MYR 763.81- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FXS-HO-EBDS
OSG
Ball end mill for high-hardness steel with an oil hole that has achieved superb tool rigidity.
Standard Price: MYR 799.69- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FX-PC-MG-EBD
OSG
Pencil neck with high rigidity provides excellent cutting even with large protrusion length.
Standard Price: MYR 667.68- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute WXL-PC-EBD
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applicationsStandard Price: MYR 181.04- Days to Ship: 5 Day(s) or more -
Long Pencil-neck Type, 2-Flute FX-PCL-EBD
OSG
Ball end mill for deep-engraving in places that cannot be reached with ordinary end mills.
Standard Price: MYR 1,997.79- Days to Ship: 5 Day(s) or more -
Ball End Type, 3-Flute PHX-DBT
OSG
Ball end mill with a new design that's given a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
Standard Price: MYR 668.86- Days to Ship: 5 Day(s) or more -
OSG
The spherical cutting edge prevents chattering even when processing vertical walls. Also allows undercut machining.
Standard Price: MYR 527.07- Days to Ship: 5 Day(s) or more -
OSG
Ball end mill with spherical cutting edge developed for shrink fitting.
Standard Price: MYR 1,120.42 Days to Ship: 5 Day(s) or more -
Ball-End Type, 2-Flute For finishing FX-H-EBD
OSG
Provides stable cutting not only with HSK holders but also with shrink-fit long arbors with large L/D ratio.
Standard Price: MYR 490.53- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute CBN-LN-SXB
OSG
2-Flute Long Neck Ball End Type CBN-LN-SXB
·Achieves deep cut milling even with small diameters. Good cutting quality.
With the effect of spiral gash, both cutting edge strength and sharpness are achieved.
·CBN sintered body is used for the flute material.Standard Price: MYR 871.43- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute WXL-HS-LN-EBD
OSG
WXL coating has excellent lubrication and resistance to wear. Can be used for a wide range of work materials and cutting areas
Standard Price: MYR 133.51- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute FX-LN-EBD-6
OSG
Ball end mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.
Standard Price: MYR 602.44- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD
OSG
Ultra-heat-resistant, ultra-hard WX super coated long neck ball. The effective length can be selected to suit the machining shape.
Standard Price: MYR 115.75- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute WXL-LN-EBD
OSG
The hard lubricant film WXL coating is effective for a wide range of processing, from mold materials to copper electrodes.
Standard Price: MYR 101.02- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute WX-LN-EBD
OSG
A long neck ball where the effective length can be selected to suit the machining shape. The high toughness carbide base material achieves stable cutting for a wide range of processing.
Standard Price: MYR 209.97- Days to Ship: 5 Day(s) or more -
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflectionStandard Price: MYR 113.12- Days to Ship: 7 Day(s) or more -
HBL, HM Coated 2-Flute Long Shank Ball
UNION TOOL
[Features]
· Long Shank Ball End Middle Series Supporting High-Hardness Materials
· Uses HardMax coating compatible with high-speed machining of high-hardness materials
· Capable of stable, long-life machining for both dry and wet typeStandard Price: MYR 408.93- Days to Ship: 5 Day(s) or more -
HLB, HM Coat, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applicationsStandard Price: MYR 109.61- Days to Ship: 6 Day(s) or more -
HTNB HM coat 2-flute taper neck ball end mill
UNION TOOL
[Features]
· High rigidity realized through an improved taper neck shape.
· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity
· 65 HRC high hardness materials can also be cutStandard Price: MYR 222.50- Days to Ship: 5 Day(s) or more -
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_b$)
CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]
UNION TOOL
[Features]
· 3-flute type achieves remarkably high feed. Shortens the roughing time
· Deep cutting is possible, enabling high efficiency machining even with shape processing where feeding speed cannot be increased
· Designed with 3-flute variable split to suppress chatter.
· It uses UTCOAT and can support a wide range from raw materials through low/medium hardness materials up to 55 HRC
· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip shape (excluding R0.75 and below)Standard Price: MYR 191.74- Days to Ship: 5 Day(s) or more -
NS TOOL
Enables efficient machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution
Standard Price: MYR 256.62- Days to Ship: 10 Day(s) or more -
SSBL200 CBN Super Speed Long Neck Ball End Mill
NS TOOL
Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools
Standard Price: MYR 942.34- Days to Ship: 8 Day(s) or more -
SFB200 CBN Super Finish Ball End Mill
NS TOOL
The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or more
Standard Price: MYR 1,130.80- Days to Ship: 10 Day(s) or more -
NS TOOL
Short shank type (supports shrink fit). Ball end mill designed for high-speed and high-hardness machining
Standard Price: MYR 170.63- Days to Ship: 11 Day(s) -
MRBH230 Long-Neck Ball, Hard (for High Hardness)
NS TOOL
The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface
Standard Price: MYR 123.93- Days to Ship: 5 Day(s) or more -
MSBH230 2-Flute Ball-End Mill for High-Hardness
NS TOOL
Standard type ball end mill for high hardness. Ideal for finishing
Standard Price: MYR 114.75- Days to Ship: 5 Day(s) or more
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL |
| Product Series | HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product] | CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product] | |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 11 Day(s) | 5 Day(s) or more | 5 Day(s) or more |
| R Size(mm) | 0.5 ～ 15 | 0.2 ～ 1 | 5 | 0.5 ～ 6 | 0.5 ～ 15 | 0.1 ～ 2 | 0.2 ～ 1.5 | 0.05 ～ 1.5 | 3 ～ 6 | 0.2 ～ 1.5 | 0.5 ～ 15 | 6.5 ～ 12.5 | 0.6 | 0.75 ～ 2 | 0.1 ～ 6 | 0.1 ～ 3 | 3 | 0.5 ～ 6 | 4 | 3 ～ 10 | 3 ～ 10 | 0.3 ～ 6 | 0.1 ～ 6 | 2 ～ 6 | 0.5 ～ 10 | 0.5 ～ 6 | 10 | 0.5 ～ 6 | 0.2 ～ 1.5 | 0.3 ～ 1.5 | 0.25 ～ 3 | 0.1 ～ 3 | 0.05 ～ 3 | 0.1 ～ 3 | 0.1 ～ 0.75 | 1.5 ～ 6 | 0.4 ～ 3 | 0.1 ～ 2 | 0.3 ～ 6 | 0.5 ～ 6 | 0.05 ～ 1 | 0.1 ～ 1 | 0.1 ～ 3 | 0.05 ～ 3 | 0.05 ～ 6 |
| Blade length (ℓ)(mm) | 1.5 ～ 45 | 0.3 ～ 1.4 | 15 | 1.5 ～ 18 | 1.5 ～ 45 | 0.16 ～ 3.2 | 0.8 ～ 8 | 0.2 ～ 8 | 4 ～ 7 | 0.3 ～ 1.8 | 2.5 ～ 55 | 26 ～ 50 | 3 | 1.5 ～ 4 | 0.4 ～ 18 | 0.2 ～ 6 | 12 | 1 ～ 12 | 8 | 12 ～ 38 | 6 ～ 20 | 0.6 ～ 22 | 0.16 ～ 12 | 8 ～ 22 | 1.5 ～ 30 | 0.7 ～ 8.1 | 15 | 1 ～ 12 | 0.3 ～ 1.8 | 0.5 ～ 2.4 | 0.5 ～ 6 | 0.16 ～ 4.8 | 0.08 ～ 6 | 0.16 ～ 4.8 | 0.3 ～ 2.5 | 4.5 ～ 25 | 0.64 ～ 4.8 | 0.16 ～ 50 | 0.9 ～ 18 | 1.5 ～ 20 | 0.08 ～ 1.2 | 0.15 ～ 1.2 | 0.2 ～ 6 | 0.07 ～ 6 | 0.1 ～ 20 |
| Underneck length (ℓ1)(mm) | 10 ～ 100 | 1.2 ～ 5.5 | - | - | 3 ～ 80 | 1 ～ 30 | - | - | 20 | 1.2 ～ 6 | - | - | - | 3 ～ 8 | - | 1.1 ～ 9 | - | 2.5 ～ 30 | 16 | - | - | 10 ～ 80 | 1 ～ 80 | 100 ～ 140 | - | 5 ～ 60 | - | 2.5 ～ 30 | 2 ～ 15 | 1.5 ～ 12 | 2.5 ～ 30 | 0.5 ～ 40 | 0.3 ～ 50 | 0.5 ～ 50 | - | - | 3 ～ 30 | 1.5 ～ 62 | - | - | 0.3 ～ 10 | 0.5 ～ 5 | 0.5 ～ 15 | 0.2 ～ 50 | - |
| Shank diameter (d)(mm) | 4 ～ 32 | 4 ～ 6 | 10 | 4 ～ 12 | 4 ～ 32 | 6 | 3 | 3 | 6 ～ 12 | 4 ～ 6 | 4 ～ 25 | 12 ～ 25 | 4 | 4 | 4 ～ 12 | 6 | 6 | 6 ～ 12 | 8 | 6 ～ 20 | 6 ～ 20 | 6 ～ 16 | 4 ～ 16 | 10 ～ 16 | 6 ～ 20 | 6 ～ 12 | 12 | 6 ～ 12 | 4 ～ 6 | 4 | 6 | 4 ～ 6 | 3 ～ 6 | 4 ～ 6 | 4 | 3 ～ 12 | 4 ～ 6 | 4 ～ 6 | 4 ～ 12 | 6 ～ 12 | 4 | 4 | 4 ～ 6 | 4 ～ 6 | 4 ～ 12 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 2 | 2 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 80 ～ 230 | 50 | 100 | 50 ～ 120 | 50 ～ 200 | 50 ～ 100 | 40 | 40 | 90 ～ 110 | 45 ～ 50 | 50 ～ 180 | 110 ～ 180 | 50 | 50 ～ 60 | 35 ～ 70 | 50 | 140 | 50 ～ 80 | 60 | 90 ～ 160 | 90 ～ 160 | 60 ～ 160 | 45 ～ 160 | 200 ～ 250 | 60 ～ 200 | 60 ～ 110 | 58 | 50 ～ 80 | 45 ～ 50 | 35 ～ 40 | 60 ～ 90 | 45 ～ 90 | 45 ～ 120 | 45 ～ 120 | 50 | 80 ～ 200 | 45 ～ 80 | 4 ～ 120 | 50 ～ 120 | 60 ～ 120 | 50 ～ 53 | 50 ～ 52 | 35 ～ 45 | 45 ～ 120 | 50 ～ 100 |
| work material | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○/◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] |
| R Precision(μm) | 0～-0.04 ～ 0～-0.03 | - | -0.01～+0.01 | -0.003～+0.003 | 0～-0.04 ～ 0～-0.03 | -0.005～+0.005 | -0.01～+0.01 | - | -0.01～+0.01 | -0.005～+0.005 | -0.01～+0.01 | - | -0.01～+0.01 | -0.007～+0.007 ～ -0.005～+0.005 | -0.007～+0.003 ～ -0.005～+0.005 | -0.005～+0.005 | -0.01～+0.01 | -0.015～+0.015 ～ -0.01 | -0.003～+0.003 | -0.01～+0.01 | -0.01～+0.01 | -0.01～0.01 | -0.005 to +0.005 ～ -0.005～+0.005 | -0.01～0.01 | -0.01～+0.01 | - | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.005～+0.005 | -0.005～+0.005 | -0.005～+0.005 | -0.005～+0.005 | -0.01～+0.01 | -0.005～0.005 | -0.007～0.007 ～ -0.005～0.005 | -0.002～0.002 | -0.005～0.005 | -0.01～0.01 ～ -0.005～0.005 | 0.01～-0.01 | 0.005～-0.005 | 0.003～-0.003 ～ 0.005～-0.005 | 0.005～-0.005 ～ 0.01～-0.01 | 0.005～-0.005 | 0.005～-0.005 ～ 0.01～-0.01 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove |
| Coating | TiAlN | - | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | TiAlN | Non-Coated | TiAlN | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | Non-Coated | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.) | TiCN | TiAlN | Non-Coated | Non-Coated | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
| Type | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Spherical Ball | Spherical Ball | Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Long-Neck Ball | Tapered neck ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Long-Neck Ball | Ball |
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_c$)
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- 0.1
- R0.1
- 0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- R2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- R2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- R3
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- R3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- R4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- R5
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22.0
- 22.5
- 23.0
- 24.0
- 25
-
Blade length (ℓ)(mm)
-
0.01～0.96
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.28
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.76
- 0.8
- 0.84
- 0.9
- 0.95
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.25
- 1.26
- 1.28
- 1.3
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.5
- 7
- 7.1
- 7.2
- 7.4
- 7.5
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.7
- 9
- 9.5
- 9.7
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.2
- 11.5
-
12～12.7
- 12
- 12.5
- 12.7
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.5
-
15
-
16～16.5
- 16
- 16.5
-
17～17.5
- 17
- 17.5
-
18
-
19
-
20
-
21～21.5
- 21
- 21.5
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
32
-
34
-
35
-
36
-
38
-
40
-
45
-
48
-
50
-
55
-
58
-
60
-
65
-
70
-
80
-
90
-
100
-
110
-
120
-
130
[5-30/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
R Precision(μm)
-
Machining Application
-
Coating
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Narrow search by specifying Manufacturer
-
- OSG (32)
- NS TOOL (29)
- UNION TOOL (12)
- NACHI(FUJIKOSHI) (10)
- DIJET (7)
- OKAZAKI SEIKO (5)
- SANDVIK (5)
- THE CUT (5)
- 7 LEADERS (4)
- SANKO MFG (4)
- ATOM (3)
- ASAHI TOOLS (2)
- KYOWA SEIKO (2)
- KYOCERA (2)
- TOYO DRILL (1)
- EIKOSHA (1)
- Poulten&Graf (1)
- SUMITOMO ELECTRIC HARDMETAL (1)
- WIDIN (1)
- VAN HOORN (0)
- GUHRING (0)
- CREATE TOOL (0)
- MAPAL (0)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy