(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Kindly be informed that it will be peak period in conjunction with the Chinese New Year festive season. Delivery pickup upon 25 January 2025 estimated would arrive after CNY holidays. Please expect slight delay for orders shipped during this peak season and we thank you for your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Cutters / Indexable End Mills（work material：Aluminum）
[What is a cutter / cutting edge replacement end mill?]
A type of milling cutter. Cutting edge and shank are separate parts and fixed with screws, etc. Major Japanese cutting manufacturer products are now expanding their areas of activity in the world manufacturing industry, and MISUMI also develops its own brand products and offers them to customers.
| Days to Ship |
|
|---|
-
Finishing Ball Cutter, End Mill Model
MISUMI
[Features]
·Tip exchange type ball cutter end mill type holder for finish
·Shank material can be selected from steel and carbide according to application
·Outer diameter: ⌀8 to ⌀32
·Number of Flutes: 2 flutes
·Compatible tip: NFBM-8 to 32- Volume Discount
Standard Price: MYR 1,845.57- Days to Ship: 4 Day(s) or more -
MillQuad-Feed Series TXSW Type High-Feed Machining Cutter
TUNGALOY
[Features]
· Tool diameter: ⌀63 to 160 mm
· Bore typeStandard Price: MYR 2,441.06 Days to Ship: 9 Day(s) -
SEC-Wave Radius Mill for WRCX Type, WRCX-R (S)
SUMITOMO ELECTRIC HARDMETAL
This multi-functional cutter performs a variety of machining with high efficiency, such as mold engraving, slope milling, and helical tapping.
Standard Price: MYR 2,146.90- Days to Ship: 5 Day(s) or more -
CoroMill 790 (Aluminum End Mill) Shoulder Cutting / End Mill Coromant Capto R790-C
SANDVIK
Shoulder milling cutter for aluminum alloy
Serrated tip mounting for high reliability and reduced impact of tip tolerance on cutter diameterStandard Price: MYR 5,110.76- Days to Ship: 10 Day(s) -
Roughing Ball Cutter, End Mill Model
MISUMI
[Features]
·Easy to manage due to the main and secondary cutting edges composed by 1 type of insert
·A wide variety of small diameters from ø10- Volume Discount
Standard Price: MYR 2,417.20- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WEX Model WEX-F
SUMITOMO ELECTRIC HARDMETAL
Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.
Standard Price: MYR 1,745.82- Days to Ship: 7 Day(s) or more -
Used for SEC-Wave Mill, WGC Model WGC(F)-RS
SUMITOMO ELECTRIC HARDMETAL
[Features]
·The high precision of the body and inserts allows for high-quality machining.
·This product has high sharpness and strength, and a wide variety of insert items can meet a wide range of needs.Standard Price: MYR 1,262.69- Days to Ship: 5 Day(s) or more -
CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Cylindrical Shank R300-A
SANDVIK
[Features]
Round-insert end mill
For everything from roughing through to medium cutting and high-feed machining
For profiling
Coarse pitch
Cylindrical shankStandard Price: MYR 1,814.18- Days to Ship: 10 Day(s) -
CoroMill 327 Grooving Cutter Weldon Shank 327-B
SANDVIK
Versatile cutter for many types of grooving, threading and chamfering
For machining and mass production of eccentric parts such as gearbox casings, mainly used in rotary tool holders on machining centers and lathesStandard Price: MYR 1,216.51- Days to Ship: 7 Day(s) or more -
Used for SEC-Wave Mill, WEX Model WEX-R
SUMITOMO ELECTRIC HARDMETAL
Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.
Standard Price: MYR 2,488.74- Days to Ship: 5 Day(s) or more -
Used for SEC-Wave Radius Mill, WRCX Model WRCXF-RS
SUMITOMO ELECTRIC HARDMETAL
This multi-functional cutter performs a variety of machining with high efficiency, such as mold engraving, slope milling, and helical tapping.
Standard Price: MYR 2,283.63- Days to Ship: 5 Day(s) or more -
SEC-Wave Multifunctional, Standard Type WMM3000E
SUMITOMO ELECTRIC HARDMETAL
Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.
Standard Price: MYR 1,394.88- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 3,831.01 Days to Ship: 10 Day(s) -
Standard Price: MYR 3,411.36- Days to Ship: 10 Day(s) -
CERATIZIT MaxiMill 274 Milling Cutter
OSG
[Specifications]
· Shape: Cutter
· Blade Tip Replacement Type End Mill
[Applications] Flat surfaces, grooves, chamferingStandard Price: MYR 1,761.88- Days to Ship: 5 Day(s) or more -
CoroMill 300 Round-Insert Face Milling Cutter (Positive Design), Arbor Mounting R300-Q
SANDVIK
[Features]
Round-insert cutter
For everything from roughing through to medium cutting and high-feed machining
For profiling
Extra-close pitch
Arbor mounting (millimeters)Standard Price: MYR 3,729.58- Days to Ship: 10 Day(s) -
Shoulder Milling Cutter, Arbor Mounting Model
MISUMI
[Features]
·Blade tip replaceable arbor mounting type holder
·General purpose shoulder milling cutter using ISO insert
·Outer diameter: ⌀80,⌀100,⌀125
·Pitch: 5, 6, 8 flutes
·Compatible tip: TP□N43 type- Volume Discount
Standard Price: MYR 5,567.14 Days to Ship: 4 Day(s) or more -
Surface Processing Cutter DoPent TEN09
TUNGALOY
Screw clamp surface processing cutter
[Features]
· Cutting edge angle: 70°
· Uses pentagonal double-sided insertsStandard Price: MYR 1,897.45- Days to Ship: 9 Day(s) or more -
PRC Phoenix Series Round Cutter Screw-in Type
OSG
A screw-in type cutter. For side cutting, grooving, engraving, shape cutting, etc.
Standard Price: MYR 2,006.65- Days to Ship: 5 Day(s) or more -
PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type
OSG
The wide insert pocket improves chip removal capability, and the employment of a body relief shape that supports 3D machining enables highly efficient shape machining.
Standard Price: MYR 1,297.67- Days to Ship: 5 Day(s) or more -
F2133 SS Small Diameter Cutter Series, Cyclone Cutter, Straight Shank
OSG
High rake type end mill with little cutting resistance. Enables high performance machining with deep cuts and high feed rates.
Standard Price: MYR 5,345.95 Days to Ship: 5 Day(s) or more -
F3042B SL F3000 Series Positive Mill Neo Shell Type
OSG
A shell type that uses a sharp, 3D breaker tip. Used with a face mill arbor.
Standard Price: MYR 5,065.01 Days to Ship: 5 Day(s) or more -
F3000 Series, Positive Mill, Neo Straight Shank /F3042ASS
OSG
An end mill type that uses a sharp, 3D breaker tip. Addition of a 20 mm shank with multi-flute specification with a small tip that is convenient for small machines.
Standard Price: MYR 1,115.36 Days to Ship: 5 Day(s) or more -
F3000 Series, Positive Mill, Neo Straight Shank /F3042BSS
OSG
An end mill type that uses a sharp, 3D breaker tip. Various applicable chips are available.
Standard Price: MYR 3,347.26- Days to Ship: 5 Day(s) or more -
PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type
OSG
The employment of this high-precision insert achieves excellent bottom surface roughness. Due to the effect of the bottom notch, cutting chips are split into 2 during ramping and helical milling, which suppresses chip biting and entanglement, enabling smooth milling.
Standard Price: MYR 1,352.53- Days to Ship: 5 Day(s) or more -
PSE Phoenix Series Shoulder Milling Cutter PSE Screw-In Type
OSG
Threaded type for shoulder milling cutter. Dedicated holders support various machining depths.
Standard Price: MYR 1,635.28- Days to Ship: 5 Day(s) or more -
PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type
OSG
Indexable high-feed radius cutter, threaded type. Dedicated holders support various machining depths.
Standard Price: MYR 1,230.14- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 1,478.13- Days to Ship: 10 Day(s) -
FUJIGEN
[Features]
· Ideal for use in low-rigidity machines such as tapping centers.
· It supports a variety of workpieces with the lineup of negative and positive types.Standard Price: MYR 1,478.13- Days to Ship: 10 Day(s) -
FUJIGEN
Ideal for use in low-rigidity machines such as tapping centers.
[Features]
· Small diameter shank lineup allows use for small machining.
· Unique negative/positive method prevents chatter even with thin objects (can machining, etc.)Standard Price: MYR 2,349.55- Days to Ship: 10 Day(s) -
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)Standard Price: MYR 4,421.40- Days to Ship: 6 Day(s) or more -
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)Standard Price: MYR 3,840.26- Days to Ship: 7 Day(s) or more -
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)Standard Price: MYR 4,421.40- Days to Ship: 6 Day(s) or more -
NEW Nice Cut Arm【1-6 Pieces Per Package】
FUJIGEN
[Features]
2 types of nice cut arms, 3-blade and 6-blade.
[Applications]
It also supports high speed cutting.Standard Price: MYR 2,053.03- Days to Ship: 7 Day(s) or more -
FUJIGEN
With multiple blades, high feed and high-speed cutting are possible.
[Features]
· The tip can be selected from three types of nose radius (R0.2, R0.4, R0.8) and has 4 usable corners to reduce cost.Standard Price: MYR 978.31- Days to Ship: 8 Day(s) or more -
FUJIGEN
[Features]
Various corner radius machining is possible by exchanging inserts.
[Applications]
For finishing flat surfaces and sides.Standard Price: MYR 1,272.66- Days to Ship: 7 Day(s) or more -
FUJIGEN
This product is capable of larger corner radius end milling than "Sumicco."
It is capable of corner radius end milling from R5 to R10 by changing inserts.Standard Price: MYR 1,601.28- Days to Ship: 10 Day(s) -
FUJIGEN
[Features]
· As it is a negative insert, all 6 corners of the front and back can be used.
· Durability is improved by the double clamp.Standard Price: MYR 1,899.85- Days to Ship: 7 Day(s) or more -
SEC-Wave Mill WAX3000E/EL Type, for chip blade tip nose radius less than 3.2
SUMITOMO ELECTRIC HARDMETAL
High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
Standard Price: MYR 1,964.59- Days to Ship: 5 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.
Standard Price: MYR 2,639.14- Days to Ship: 5 Day(s) or more -
SEC-Wave Mill WEX2000E/EL Type
SUMITOMO ELECTRIC HARDMETAL
Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.
Standard Price: MYR 934.54- Days to Ship: 5 Day(s) or more -
SEC-Wave Repeater, WRX2000E Type
SUMITOMO ELECTRIC HARDMETAL
Optimizes cutting edge placement to realize low resistance and low vibration machining. Smooth chip discharge and high body rigidity are made possible by the lead groove and special pocket shape.
Standard Price: MYR 2,192.48- Days to Ship: 5 Day(s) or more -
SEC-Wave Repeater, WRX2000R Type
SUMITOMO ELECTRIC HARDMETAL
Optimizes cutting edge placement to realize low resistance and low vibration machining. Smooth chip discharge and high body rigidity are made possible by the lead groove and special pocket shape.
Standard Price: MYR 3,970.00- Days to Ship: 5 Day(s) or more -
SEC-Wave Multifunctional, Standard Type WMM2000E
SUMITOMO ELECTRIC HARDMETAL
Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.
Standard Price: MYR 1,198.89- Days to Ship: 5 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Applications]Can be used for side milling, grooving, rough cutting, and medium-rough cutting. [Features]Can be used for machining a wide range of steel materials such as general steel, carbon steel, and stainless steel.
Standard Price: MYR 3,031.53- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Machining Application |
| blade diameter D(φ) |
| work material |
| Finish category |
| Overall length (L)(mm) |
| Number of flutes(sheet) |
| Mounting Method |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Maximum Cutting Depth (Ad)(mm) |
| Compatible Tip Material |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | TUNGALOY | SUMITOMO ELECTRIC HARDMETAL | SANDVIK | MISUMI | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SANDVIK | SANDVIK | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SANDVIK | SANDVIK | OSG | SANDVIK | MISUMI | TUNGALOY | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL |
| Product Series | CoroMill 790 (Aluminum End Mill) Shoulder Cutting / End Mill Coromant Capto R790-C | CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Cylindrical Shank R300-A | CoroMill 300 Round-Insert Face Milling Cutter (Positive Design), Arbor Mounting R300-Q | PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type | F2133 SS Small Diameter Cutter Series, Cyclone Cutter, Straight Shank | PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type | PSE Phoenix Series Shoulder Milling Cutter PSE Screw-In Type | PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type | SEC-Wave Mill WAX3000E/EL Type, for chip blade tip nose radius less than 3.2 | ||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 10 Day(s) | 4 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 10 Day(s) | 5 Day(s) or more | 10 Day(s) | 4 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 10 Day(s) | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Machining Application | Inclined Cuts | Plane / Plunging (Z feed) / Inclined Cuts | Plane / Groove | Side | Inclined Cuts | Plane / Side / Groove | Plane / Groove / Chamfer | Plane | Groove / Chamfer | Plane / Side / Groove | Plane / Groove | Plane / Side / Groove / Vertical | Plane | Plane / Side / Groove | Plane / Groove / Chamfer | Plane | Side / Groove | Plane | Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane / Chamfer | Side / Groove | Side / Groove | Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Vertical | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Vertical | Side / Groove |
| blade diameter D(φ) | 10 ～ 16 | - | 63 ～ 100 | 25 mm ～ 100 mm | 16 ～ 25 | 40 ～ 63 | 32 ～ 63 | 10 mm ～ 32 mm | - | 80 ～ 125 | 63 ～ 100 | 32 ～ 40 | 42mm | 40mm ～ 250mm | 18.9 ～ 123.7 | 40 ～ 200 | 125 | 50 ～ 315 | 10 ～ 30 | 10 ～ 88 | 63 | 50 | 20 | 32 ～ 63 | 16 ～ 63 | 16 ～ 40 | 13.2 ～ 46.4 | 30 ～ 40 | 30 ～ 40 | 60 ～ 80 | 100 ～ 150 | 100 ～ 130 | 110 ～ 160 | - | 20 ～ 50 | 30 ～ 80 | 40 | 40 ～ 80 | 20 ～ 40 | 40 ～ 63 | 14 ～ 63 | 20 ～ 40 | 40 ～ 50 | 20 ～ 30 | 80 ～ 200 |
| work material | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum |
| Finish category | Finishing | - | Rough and medium rough processing | Finishing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Finishing | Finishing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing / Finishing | Rough to Finish Processing | Rough and medium rough processing / Finishing | Rough and medium rough processing | - | - | - | - | - | - | - | - | - | - | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing |
| Overall length (L)(mm) | 123 ～ 132 | - | - | - | 200 ～ 250 | - | - | 160 ～ 250 | 74 ～ 160 | - | - | 150 ～ 160 | - | - | 40$40.7 ～ 98.7 | - | - | 40 ～ 63 | 33 ～ 40 | 40 ～ 250 | 120 | 40 | 100 | 150 ～ 200 | 90 ～ 190 | 27 ～ 40 | 140 ～ 300 | 85 | 85 | 120 | 120 ～ 123.5 | 123.5 | 120 ～ 123.5 | - | 100 ～ 105 | 105 ～ 200 | 134.6 ～ 185 | 120 | 130 ～ 220 | - | 80 ～ 180 | 120 ～ 160 | - | 130 ～ 150 | - |
| Number of flutes(sheet) | 1 | - | 3 ～ 5 | 2 ～ 9 | 2 | 4 ～ 6 | 3 ～ 6 | 2 | - | 4 ～ 6 | 4 ～ 6 | 4 | 5 | 4 ～ 16 | 3 ～ 12 | 4 ～ 12 | 8 | 3 ～ 114 | 2 ～ 4 | 2 ～ 10 | 5 | 5 | 3 | 3 ～ 4 | 2 ～ 6 | 2 ～ 6 | 2 ～ 5 | 3 | 3 | 3 | 3 ～ 6 | 3 ～ 6 | 3 ～ 6 | 3 ～ 6 | 2 ～ 5 | 2 ～ 4 | 2 | 3 | 1 ～ 3 | - | 1 ～ 8 | 4 ～ 16 | 10 ～ 16 | 3 ～ 5 | 4 ～ 10 |
| Mounting Method | With handle | Arbor | Arbor | Arbor / Centering Plug | With handle | Arbor | Arbor | With handle | With handle | Arbor | Arbor | With handle | Centering Plug | Arbor | With handle / Arbor | Arbor | Arbor | Arbor | Centering Plug | With handle / Arbor | With handle | Arbor | With handle | With handle | With handle | Centering Plug | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | Arbor | With handle | With handle | Arbor | With handle | Arbor |
| Shank diameter (d)(mm) | 12 ～ 16 | - | - | 22 ～ 55 | 20 ～ 32 | - | - | 16 ～ 32 | 12 ～ 20 | - | - | 32 | - | 16 ～ 60 | 20 ～ 25 | 16 ～ 60 | - | - | - | 20 ～ 42 | 32 | - | 20 | 32 | 16 ～ 32 | - | 25 ～ 42 | - | - | - | - | - | - | - | - | - | - | - | 20 ～ 32 | - | 16 ～ 32 | 20 ～ 42 | - | 20 ～ 25 | - |
| Underneck length (ℓ1)(mm) | - | - | - | - | 27 ～ 40 | - | - | - | - | - | - | 50 ～ 55 | - | - | 25.7 ～ 40.7 | - | - | 40 ～ 63 | - | 50 ～ 120 | 45 | - | 30 | 45 | 25 ～ 90 | - | 40 ～ 180 | - | - | - | - | - | - | - | - | - | - | - | 60 ～ 70 | - | 25 ～ 60 | 40 ～ 50 | - | 35 ～ 50 | - |
| Maximum Cutting Depth (Ad)(mm) | - | - | 8 | 12 ～ 18 | 14.4 ～ 22.3 | 14 | 4 ～ 6 | 0.7 ～ 7 | - | 14 | 8 | 39 | 4 | 5.5 ～ 10 | - | 4 ～ 10 | - | 6.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 16–18 | 10 | 10 | 18～36 | 18～36 | 17～35 | 16 |
| Compatible Tip Material | Carbide Coat | - | - | Carbide Coat | Carbide Coat | - | - | - | Carbide Coat | - | - | - | - | Carbide Coat | Carbide Coat | - | - | Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat / Cermet | No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Machining Application
-
blade diameter D(φ)
- 6
- 8
- 9
- 10
- 10 mm
- 11
- 12
- 12 mm
- 13.2
- 13.4
- 14
- 15
- 15 mm
- 15.4
- 16
- 16 mm
- Cutter Diameter φ16
- 16.2
- 17
- 17.5
- 18
- Cutter Diameter φ18
- 18.2
- 18.4
- 18.5
- 18.9
- 19
- 20
- 20 mm
- Cutter Diameter φ20
- 20.2
- 21
- 22
- Cutter Diameter φ22
- 23
- 23.2
- 23.4
- 23.8
- 24
- 24 mm
- 25
- 25 mm
- 25 mm
- Cutter Diameter φ25
- 26
- 28
- 28.2
- 30
- 30 mm
- 30/32
- 30.7
- 32
- 32 mm
- Cutter Diameter φ32
- 33
- 33.4
- 34
- 35
- 35.9
- 36
- 36.0 mm
- 36 mm
- 37
- 38
- 38.2
- 39
- 40
- 40 mm
- 40mm
- Cutter Diameter φ40
- 40(42.9)
- 42
- 42.0 mm
- 42mm
- 43
- 44
- 44 mm
- 44mm
- 44.5 mm
- 45
- 46.4
- 47
- 48.7
- 50
- 50 mm
- 50mm
- 50 mm
- 50.0 mm
- Cutter Diameter φ50
- 50 (52.9)
- 51
- 51.2
- 52
- 52.0 mm
- 52mm
- 52 mm
- 52.5 mm
- 54
- 54 mm
- 54mm
- 54.08mm
- 55
- 60
- 61.7
- 62.5 mm
- 62.5mm
- 63
- 63 mm
- 63mm
- 63 mm
- 63.0 mm
- Cutter Diameter φ63
- 63 (65.9)
- 63.4
- 63.5
- 64
- 64.08mm
- 65
- 66
- 66 mm
- 66.0 mm
- 66mm
- 66 mm
- 68
- 69.7mm
- 70
- 75
- 75.5 mm
- 75.5mm
- 76.2
- 77.08mm
- 77.08 mm
- 78.7
- 80
- 80 mm
- 80mm
- 80 mm
- 80.0 mm
- Cutter Diameter φ80
- 80 (82.9)
- 83.4
- 84
- 84 mm
- 84.0 mm
- 84mm
- 86.7mm
- 88
- 89.4
- 90
- 92.5mm
- 94.08mm
- 94.08 mm
- 98.7
- 98.8mm
- 100
- 100 mm
- 100mm
- 100 mm
- 100.0 mm
- Cutter Diameter φ100
- 100 (102.9)
- 101.3mm
- 101.6
- 105
- 106.7mm
- 109
- 110
- 112.5mm
- 114.08mm
- 114.08 mm
- 118.8mm
- 123.7
- 125
- 125mm
- 125 mm
- Cutter Diameter φ125
- 125 (127.9)
- 127
- 130
- 131.4mm
- 131.7mm
- 137.5mm
- 138.8mm
- 139.08mm
- 139.08 mm
- 140
- 150
- 152.4
- 157
- 160
- 160 mm
- 160mm
- 160 mm
- 160 (162.9)
- 166.7mm
- 172.5mm
- 174.08 mm
- 174.08mm
- 174.08 mm
- 200
- 200mm
- 200 (202.9)
- 212.5mm
- 250
- 250mm
- 250 (252.9)
- 268.8mm
- 315
-
work material
-
Finish category
- Rough and medium rough processing
- Finishing
- Rough to Finish Processing
-
Overall length (L)(mm)
-
26～27
- 26
- 27
-
32～38
- 32
- 33
- 35
- 38
-
40～49
- 40
- 40$40.7
- 42
- 43
- 45
- 49
-
50～57
- 50
- 50$50.7
- 55
- 56
- 57
-
60～63$63.7
- 60
- 63
- 63$63.7
-
70～79
- 70
- 73
- 74
- 75
- 77.7
- 78
- 79
-
80～88
- 80
- 83
- 84
- 84.7
- 85
- 88
-
90～98.7
- 90
- 92
- 95
- 96
- 98
- 98.7
-
100～109
- 100
- 101
- 102
- 103
- 104
- 105
- 108
- 109
-
110～117
- 110
- 112
- 115
- 117
-
120～129
- 120
- 121
- 122
- 123
- 123.5
- 124
- 125
- 127
- 128
- 129
-
130～138
- 130
- 131
- 132
- 133
- 134
- 134.6
- 135
- 136
- 137
- 138
-
140～145
- 140
- 141
- 143
- 144
- 145
-
150～158
- 150
- 155
- 158
-
160～166
- 160
- 165
- 166
-
170～176
- 170
- 171
- 172
- 173
- 175
- 176
-
180～187
- 180
- 184.6
- 185
- 186
- 187
-
190～191
- 190
- 191
-
200
-
210～217.5
- 210
- 215
- 217.5
-
220
-
230
-
240
-
250～256
- 250
- 256
-
260～266.8
- 260
- 266.8
-
270
-
280
-
290～296.8
- 290
- 296.8
-
300～306
- 300
- 306
-
331.8
-
350
-
-
Number of flutes(sheet)
-
Mounting Method
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Maximum Cutting Depth (Ad)(mm)
-
Compatible Tip Material
Narrow search by specifying Manufacturer
-
- SUMITOMO ELECTRIC HARDMETAL (52)
- SANDVIK (31)
- FUJIGEN (12)
- OSG (11)
- NACHI(FUJIKOSHI) (6)
- ASAHI TOOLS (3)
- THE CUT (2)
- TUNGALOY (2)
- MITSUBISHI HITACHI TOOL (0)
- ESCO (0)
- DIJET (0)
- ISCAR (0)
- BIG DAISHOWA SEIKI (0)
- KYOCERA (0)
- NGK SPARK PLUG (0)
CAD
-
- 2D
- 3D
Related Categories to Cutters / Indexable End Mills
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy