(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Cutters / Indexable End Mills（work material：Copper）
An online store for cutters /cutting edge replacement end mills. In MISUMI's e-catalog, specifications/dimensions of brand, machining application, blade diameter, mounting method, compatible work materials, finish classification / total length, etc. can be selected with one click, so you can e ...Readmore
An online store for cutters /cutting edge replacement end mills. In MISUMI's e-catalog, specifications/dimensions of brand, machining application, blade diameter, mounting method, compatible work materials, finish classification / total length, etc. can be selected with one click, so you can easily find the desired cutter / cutting edge replacement end mill.
[What is a cutter / cutting edge replacement end mill?]
A type of milling cutter. Cutting edge and shank are separate parts and fixed with screws, etc. Major Japanese cutting manufacturer products are now expanding their areas of activity in the world manufacturing industry, and MISUMI also develops its own brand products and offers them to customers.
▲ Close
| Days to Ship |
|
|---|
| Brand |
|---|
| Product Series |
| Days to Ship |
| Machining Application |
| blade diameter D(φ) |
| work material |
| Finish category |
| Overall length (L)(mm) |
| Number of flutes(sheet) |
| Mounting Method |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Maximum Cutting Depth (Ad)(mm) |
| Compatible Tip Material |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ASAHI TOOLS | TUNGALOY | ASAHI TOOLS | ASAHI TOOLS | DIJET | DIJET | DIJET | DIJET | DIJET | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | DIJET | DIJET | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
| Product Series | Super End Chipper SEC Type - Standard Type, Medium-Long Type | Super End Chipper SEC Type - Long, Extra Long, MT Shank, Weldon Shank Type | End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C | End Mill And Shoulder Cutter Diameter 40 To 84 mm Coromant Capto R390-C-18 | CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Weldon Shank R300-B | CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Cylindrical Shank R300-A | CoroMill 300 Round-Insert Face Milling Cutter (Positive Design), Arbor Mounting R300-Q | CoroMill 331 Full Side Cutter, Machining Width: 12.0-26.5 mm 331.32 | CoroMill 331 Full Side Cutter, Machining Width: 6.0-12.0 mm 331.32 | CoroMill 327 Coromant Capto Short, Without Gripper Groove C-391.327 | CoroMill 327 ER For Rotary Tools, Integrated Collet Type 392.ER327 | CoroMill 345 Face Milling, Diameter: 40-250 mm, Arbor Mounting 345-Q | CoroMill 360 Face Milling Cutter For Heavy-Duty Cutting, Right-Handed | CoroMill 790 (Aluminum End Mill) Shoulder Cutting / End Mill Coromant Capto R790-C | CoroMill 790 (Aluminum End Mill) Shoulder Cutting / End Mill Cylindrical Shank R790-A | CoroMill R216F Ball End Mill For Finishing, Steel & Carbide Cylindrical Shank, R216F-A | |||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 8 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 5 Day(s) or more | 7 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 7 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Machining Application | Plane / Side / Groove | Plane | Side / Groove | Plane / Side / Groove | Side / Groove / Vertical | Plane / Side / Groove | Plane / Side / Groove | Side / Groove / Inclined Cuts / Vertical | Plane / Groove / Vertical | Groove | Plane | Groove / Chamfer | Plane | Plane / Side / Groove | Plane / Side / Groove | Plane / Side | Groove | Side / Groove / Inclined Cuts / Vertical | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane | Plane | Plane | Groove | Groove | Plane / Side / Groove | Plane / Side / Groove | - | - | - | Plane / Groove | Groove / Chamfer | Groove / Chamfer | Plane | Plane | Plane | Side | Side | Plane / Side / Groove | Groove | Groove | - | - | - |
| blade diameter D(φ) | 50 ～ 100 | 50 ～ 315 | 10 ～ 30 | 50 ～ 100 | 50 ～ 63 | 20 ～ 50 | 63 ～ 100 | 16 ～ 50 | 50 ～ 80 | 100mm | 42mm | 39 ～ 44 | 54.08mm ～ 174.08mm | 80mm ～ 160mm | 40mm ～ 250mm | 63mm ～ 160mm | 50mm | 16 ～ 35 | 16 ～ 50 | 20 ～ 100 | 40 ～ 84 | 12 mm ～ 25 mm | 10 mm ～ 32 mm | 40 ～ 200 | - | - | 16 ～ 42 | 20 mm ～ 80 mm | 50 mm ～ 80 mm | 40 mm ～ 80 mm | - | - | - | - | 174.08 mm | 77.08 mm ～ 174.08 mm | - | 25 mm ～ 100 mm | 25 mm ～ 40 mm | 8 ～ 30/32 | 10 mm ～ 32 mm | 30 ～ 40 | 14 ～ 63 | 40 ～ 63 | 25 ～ 63 |
| work material | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper | Copper |
| Finish category | - | - | - | - | - | - | - | - | - | Finishing | Rough and medium rough processing | Finishing | Finishing | Finishing | Rough and medium rough processing / Finishing | Finishing | Finishing | - | - | Rough and medium rough processing / Finishing | Rough and medium rough processing | Finishing | Finishing | Rough and medium rough processing / Finishing | Finishing | Finishing | Rough and medium rough processing / Finishing | Rough and medium rough processing / Finishing | Finishing | Finishing | - | Rough and medium rough processing | Finishing | Finishing | Finishing | Finishing | Rough and medium rough processing | Finishing | Finishing | Rough and medium rough processing | Finishing | Finishing | - | - | - |
| Overall length (L)(mm) | - | 40 ～ 63 | 130 ～ 240 | 60 ～ 110 | - | 110 ～ 150 | - | 130 ～ 170 | - | - | - | 125 | 45 ～ 63 | 50 ～ 63 | - | 40 ～ 63 | 171 | 180 ～ 350 | 150 ～ 250 | - | - | 109 ～ 141 | 160 ～ 250 | - | - | - | - | - | - | - | - | - | - | 74 ～ 160 | 63 | 45 ～ 63 | 80 | - | 125 ～ 150 | 83 ～ 240 | - | - | 80 ～ 180 | 40 | 120 ～ 220 |
| Number of flutes(sheet) | 6 ～ 10 | 3 ～ 114 | - | 6 ～ 10 | 4 ～ 5 | - | - | - | 3 ～ 4 | 6 | 5 | 2 ～ 3 | 4 ～ 12 | 7 ～ 12 | 4 ～ 16 | 5 ～ 10 | 2 | - | - | 2 ～ 10 | 3 ～ 6 | 2 | 2 | 4 ～ 12 | 6 ～ 10 | 6 ～ 16 | 2 ～ 4 | 2 ～ 8 | 4 ～ 6 | 3 ～ 6 | 6 | - | - | - | 12 | 7 ～ 16 | 6 | 2 ～ 9 | 2 ～ 3 | - | 2 | - | 1 ～ 8 | 6 ～ 8 | 2 ～ 6 |
| Mounting Method | Arbor | Arbor | With handle | Arbor | Arbor | With handle | Arbor | With handle | Arbor | Arbor | Centering Plug | With handle | Arbor | Arbor | Arbor | Arbor | With handle | With handle | With handle | Centering Plug | Centering Plug | With handle | With handle | Arbor | Arbor | Arbor | Centering Plug | Centering Plug | Centering Plug | Centering Plug | - | Centering Plug | Centering Plug | With handle | Arbor | Arbor | Arbor | Arbor / Centering Plug | With handle | With handle | Centering Plug | - | With handle | Centering Plug | With handle |
| Shank diameter (d)(mm) | - | - | 16 ～ 32 | - | - | 20 ～ 32 | - | 16 ～ 42 | - | 22 | - | 25 | 22 ～ 40 | 25.4 ～ 50.8 | 16 ～ 60 | 22 ～ 40 | 40 | 16 ～ 32 | 16 ～ 42 | - | - | 16 ～ 32 | 16 ～ 32 | 16 ～ 60 | 27 ～ 40 | 27 ～ 50 | 8 ～ 16 | 48 | 48 | 22 ～ 44 | 32 ～ 52 | - | - | 12 ～ 20 | 50.8 | 22 ～ 40 | 40 | 22 ～ 55 | 25 ～ 32 | 12 ～ 32 | - | - | 16 ～ 32 | - | 20 ～ 42 |
| Underneck length (ℓ1)(mm) | - | 40 ～ 63 | - | - | - | 25 ～ 40 | - | 50 ～ 70 | - | - | - | 23 | - | - | - | - | - | 40 ～ 90 | 25 ～ 65 | 23 ～ 70 | 38 ～ 100 | - | - | - | - | - | 25 ～ 45 | 40 ～ 58 | - | - | - | - | - | - | - | - | - | - | - | 19 ～ 54 | 18 ～ - | 50 ～ 95 | 25 ～ 60 | - | 25 ～ 80 |
| Maximum Cutting Depth (Ad)(mm) | - | 6.4 | - | - | - | - | - | - | - | 15 | 4 | 3 ～ 4 | 6 | 15.4 ～ 15.7 | 5.5 ～ 10 | - | 44.6 | - | - | 5.5 ～ 10 | 15.4 | 1 ～ 5 | 0.7 ～ 7 | 4 ～ 10 | - | - | 10 | 5.5 | - | - | - | - | - | - | 6 | 6 | 13 | 12 ～ 18 | 12 | 1.2 ～ 4.8 | 8.6 ～ 28.6 | 28.3 ～ 44.6 | - | - | - |
| Compatible Tip Material | - | Carbide Coat | - | - | - | - | - | - | - | Carbide Coat | - | Carbide Coat | - | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | - | - | - | Carbide Coat | - | - | - | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | - | Diamond (PCD) | - | Carbide Coat | Carbide Coat / Cermet | - | - | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | - | - | - |
| Brand |
|---|
| Product Series |
Loading...
Configure
Specification/Dimensions
-
Machining Application
-
blade diameter D(φ)
- 6
- 8
- 9
- 10
- 10 mm
- 11
- 12
- 12 mm
- 13.2
- 13.4
- 14
- 15
- 15 mm
- 15.4
- 16
- 16 mm
- Cutter Diameter φ16
- 16.2
- 17
- 17.5
- 18
- Cutter Diameter φ18
- 18.2
- 18.4
- 18.5
- 18.9
- 19
- 20
- 20 mm
- Cutter Diameter φ20
- 20.2
- 21
- 22
- Cutter Diameter φ22
- 23
- 23.2
- 23.4
- 23.8
- 24
- 24 mm
- 25
- 25 mm
- 25 mm
- Cutter Diameter φ25
- 26
- 28
- 28.2
- 30
- 30 mm
- 30/32
- 30.7
- 32
- 32 mm
- Cutter Diameter φ32
- 33
- 33.4
- 34
- 35
- 35.9
- 36
- 36.0 mm
- 36 mm
- 37
- 38
- 38.2
- 39
- 40
- 40 mm
- 40mm
- Cutter Diameter φ40
- 40(42.9)
- 42
- 42.0 mm
- 42mm
- 43
- 44
- 44 mm
- 44mm
- 44.5 mm
- 45
- 46.4
- 47
- 48.7
- 50
- 50 mm
- 50mm
- 50 mm
- 50.0 mm
- Cutter Diameter φ50
- 50 (52.9)
- 51
- 51.2
- 52
- 52.0 mm
- 52mm
- 52 mm
- 52.5 mm
- 54
- 54 mm
- 54mm
- 54.08mm
- 55
- 60
- 61.7
- 62.5 mm
- 62.5mm
- 63
- 63 mm
- 63mm
- 63 mm
- 63.0 mm
- Cutter Diameter φ63
- 63 (65.9)
- 63.4
- 63.5
- 64
- 64.08mm
- 65
- 66
- 66 mm
- 66.0 mm
- 66mm
- 66 mm
- 68
- 69.7mm
- 70
- 75
- 75.5 mm
- 75.5mm
- 76.2
- 77.08mm
- 77.08 mm
- 78.7
- 80
- 80 mm
- 80mm
- 80 mm
- 80.0 mm
- Cutter Diameter φ80
- 80 (82.9)
- 83.4
- 84
- 84 mm
- 84.0 mm
- 84mm
- 86.7mm
- 88
- 89.4
- 90
- 92.5mm
- 94.08mm
- 94.08 mm
- 98.7
- 98.8mm
- 100
- 100 mm
- 100mm
- 100 mm
- 100.0 mm
- Cutter Diameter φ100
- 100 (102.9)
- 101.3mm
- 101.6
- 105
- 106.7mm
- 109
- 110
- 112.5mm
- 114.08mm
- 114.08 mm
- 118.8mm
- 123.7
- 125
- 125mm
- 125 mm
- Cutter Diameter φ125
- 125 (127.9)
- 127
- 130
- 131.4mm
- 131.7mm
- 137.5mm
- 138.8mm
- 139.08mm
- 139.08 mm
- 140
- 150
- 152.4
- 157
- 160
- 160 mm
- 160mm
- 160 mm
- 160 (162.9)
- 166.7mm
- 172.5mm
- 174.08 mm
- 174.08mm
- 174.08 mm
- 200
- 200mm
- 200 (202.9)
- 212.5mm
- 250
- 250mm
- 250 (252.9)
- 268.8mm
- 315
-
work material
-
Finish category
- Rough and medium rough processing
- Finishing
- Rough to Finish Processing
-
Overall length (L)(mm)
-
26～27
- 26
- 27
-
32～38
- 32
- 33
- 35
- 38
-
40～49
- 40
- 40$40.7
- 42
- 43
- 45
- 49
-
50～57
- 50
- 50$50.7
- 55
- 56
- 57
-
60～63$63.7
- 60
- 63
- 63$63.7
-
70～79
- 70
- 73
- 74
- 75
- 77.7
- 78
- 79
-
80～88
- 80
- 83
- 84
- 84.7
- 85
- 88
-
90～98.7
- 90
- 92
- 95
- 96
- 98
- 98.7
-
100～109
- 100
- 101
- 102
- 103
- 104
- 105
- 108
- 109
-
110～117
- 110
- 112
- 115
- 117
-
120～129
- 120
- 121
- 122
- 123
- 123.5
- 124
- 125
- 127
- 128
- 129
-
130～138
- 130
- 131
- 132
- 133
- 134
- 134.6
- 135
- 136
- 137
- 138
-
140～145
- 140
- 141
- 143
- 144
- 145
-
150～158
- 150
- 155
- 158
-
160～166
- 160
- 165
- 166
-
170～176
- 170
- 171
- 172
- 173
- 175
- 176
-
180～187
- 180
- 184.6
- 185
- 186
- 187
-
190～191
- 190
- 191
-
200
-
210～217.5
- 210
- 215
- 217.5
-
220
-
230
-
240
-
250～256
- 250
- 256
-
260～266.8
- 260
- 266.8
-
270
-
280
-
290～296.8
- 290
- 296.8
-
300～306
- 300
- 306
-
331.8
-
350
-
-
Number of flutes(sheet)
-
Mounting Method
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Maximum Cutting Depth (Ad)(mm)
-
Compatible Tip Material
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- SANDVIK (31)
- DIJET (7)
- NACHI(FUJIKOSHI) (6)
- ASAHI TOOLS (3)
- THE CUT (2)
- TUNGALOY (1)
- FUJIGEN (0)
- MITSUBISHI HITACHI TOOL (0)
- ESCO (0)
- OSG (0)
- SUMITOMO ELECTRIC HARDMETAL (0)
- ISCAR (0)
- BIG DAISHOWA SEIKI (0)
- KYOCERA (0)
- NGK SPARK PLUG (0)
CAD
-
- 2D
- 3D
Recently Viewed Products
Please confirm the actual "Days to Ship" on product page after login
Related Categories to Cutters / Indexable End Mills
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
Not a MISUMI customer yet? Register & enjoy 50% off your 1st order!* (*T&C apply.)
- 7 Million Products
- 2,000 Brands
- Free CAD downloads
- Quote/order any time
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy