(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

Roll Taps(Chamfer threads (Lcf):4P)

A forming tap is a raised type screw forming tool that makes a screw mark on a metal pilot hole. It can be used for both blind holes and through holes, and there is almost no chips, so cleaning can be shortened, etc. Depending on the product, there is also a special processing that enables long ...Readmore

A forming tap is a raised type screw forming tool that makes a screw mark on a metal pilot hole. It can be used for both blind holes and through holes, and there is almost no chips, so cleaning can be shortened, etc. Depending on the product, there is also a special processing that enables long-life processing without chip problems, and low torque is achieved by adopting a special shape for the tap raised part. Others have a tin coating and have excellent abrasion and chip-welding resistance. Compatible materials for processing include rolled aluminum, structural steel, copper, etc. The selection point of the forming tap is not suitable for the work material, so select one suitable for the work material used. At the same time, it is necessary to check the screw length, nominal size, pitch, number of bites, etc., depending on the place to be used before selecting.  ▲ Close

Days to Ship
  • All
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 14 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

      Roll Taps for Steels_N+RZ

        TiN Coated High-Speed Steel Roll Tap

          Roll Taps, Coated_R+V

            Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

              Taflet -S TFS

                Fluteless (Nu-Roll) Tap for Non-Ferrous Metals_B-NRT

                  IT-Toughlet C Coated

                    IT-Toughlet TiCN Coated

                      Taflet for Steel TFST

                        Taflet -L TFL

                          Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT

                            CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

                              Fluteless Tap (X Performer)_S-XPF

                                Fluteless (Nu-Roll) Tap for Steels_NRT

                                  Fluteless (Hi-Roll) Tap for Non-Ferrous Metals_B-HRT

                                    Roll Taps for Dry Tapping, Coated_OL+RZ

                                      High Performance Roll Taps, Coated_HP+RZ

                                        Long Shank Roll Taps for Steels_LS-N-RZ

                                          Long Shank Roll Taps for Non-Ferrous Materials_LS-N-RS

                                            Roll Taps for Non-Ferrous Materials_N+RS

                                              Roll Taps for Medium Hardness Carbon Steels_MHRZ-J

                                              Brand

                                              OSG

                                              YAMAWA MFG

                                              MISUMI

                                              YAMAWA MFG

                                              OSG

                                              NACHI(FUJIKOSHI)

                                              OSG

                                              TANOI MFG

                                              TANOI MFG

                                              NACHI(FUJIKOSHI)

                                              NACHI(FUJIKOSHI)

                                              OSG

                                              OSG

                                              OSG

                                              OSG

                                              OSG

                                              YAMAWA MFG

                                              YAMAWA MFG

                                              YAMAWA MFG

                                              YAMAWA MFG

                                              YAMAWA MFG

                                              YAMAWA MFG

                                              Product Series

                                              CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

                                              Roll Taps for Steels_N+RZ

                                              TiN Coated High-Speed Steel Roll Tap【5 Pieces Per Package】

                                              Roll Taps, Coated_R+V

                                              Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

                                              Taflet -S TFS

                                              Fluteless (Nu-Roll) Tap for Non-Ferrous Metals_B-NRT

                                              IT-Toughlet C Coated

                                              IT-Toughlet TiCN Coated

                                              Taflet for Steel TFST

                                              Taflet -L TFL

                                              Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT

                                              CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

                                              Fluteless Tap (X Performer)_S-XPF

                                              Fluteless (Nu-Roll) Tap for Steels_NRT

                                              Fluteless (Hi-Roll) Tap for Non-Ferrous Metals_B-HRT

                                              Roll Taps for Dry Tapping, Coated_OL+RZ

                                              High Performance Roll Taps, Coated_HP+RZ【1-108 Pieces Per Package】

                                              Long Shank Roll Taps for Steels_LS-N-RZ

                                              Long Shank Roll Taps for Non-Ferrous Materials_LS-N-RS

                                              Roll Taps for Non-Ferrous Materials_N+RS

                                              Roll Taps for Medium Hardness Carbon Steels_MHRZ-J

                                              Days to Ship 5 Day(s) or more 7 Day(s) or more 4 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 5 Day(s) or more 6 Day(s) or more 8 Day(s) or more 8 Day(s) or more 7 Day(s) or more 7 Day(s) or more
                                              Screw size (Nominal)No.2UN ~ M12M1 ~ M20M3 ~ M10M1 ~ M6No.0UN ~ M20M1.4 ~ M6M8 ~ M20M1 ~ M10M1 ~ M10M1.4 ~ M10M1.4 ~ M10M3 ~ M12No.2UN ~ M12M1 ~ M12M1.6 ~ M10M6No.10 ~ M6No.10-32UNF ~ M20M8 ~ M10M8 ~ M10No.0 ~ M20M6 ~ M14
                                              Screw TypesMeter / unifiedMeterMeterMeterMeter / unifiedMeterMeterMeterMeterMeterMeterMeterMeter / unifiedMeterMeterMeterMeter / unifiedMeter / unifiedMeterMeterMeter / unifiedMeter
                                              work materialLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○]Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○]Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]
                                              Pitch (P), Number of Threading(mm)0.25 ~ 560.25 ~ 20.5 ~ 1.50.25 ~ 10.25 ~ 800.3 ~ 11.25 ~ 1.50.2 ~ 1.50.2 ~ 1.50.3 ~ 1.50.3 ~ 1.50.5 ~ 1.750.25 ~ 560.2 ~ 1.750.35 ~ 1.2510.25 ~ 640.5 ~ 1.751.25 ~ 1.51.25 ~ 1.50.25 ~ 2.51 ~ 1.5
                                              Tool Material TypePowder high-speed steelHigh-speed steelVanadium High-Speed SteelHigh-speed steelVanadium High-Speed SteelHigh-speed steelHigh-speed steelHigh-speed steelHigh-speed steelHigh-speed steelHigh-speed steelVanadium High-Speed SteelPowder high-speed steelPowder high-speed steel / Vanadium High-Speed SteelHigh-speed steelHigh-speed steelPowder high-speed steelPowder high-speed steelHigh-speed steelHigh-speed steelHigh-speed steel-
                                              Tap TypeRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tap
                                              Hole typeFor blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through holeFor blind hole--For through holeFor through holeFor through hole / For blind holeFor blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole
                                              Chamfer threads (Lcf)4P4P4P4P4P4P4P4P4P4P4P4P4P4P4P4P4P4P4P4P4P4P
                                              Coating TypeTiCN-TiNTiNTiN-TiNOtherTiCN--TiNTiCNTiCNNon-CoatedNon-CoatedTiCNTiCN----
                                              Coating Y/NAvailableNAAvailableAvailableAvailableNAAvailableAvailableAvailableNANAAvailableAvailableAvailableNANAAvailableAvailableNANANAAvailable
                                              Overall Length (L)(mm)30 ~ 8232 ~ 10546 ~ 7536 ~ 6230 ~ 10534 ~ 6270 ~ 10530 ~ 7530 ~ 7534 ~ 7534 ~ 7580 ~ 15060 ~ 20030 ~ 8236 ~ 756236 ~ 6246 ~ 105100 ~ 150100 ~ 15036 ~ 10562 ~ 88
                                              Brand
                                              Product Series

                                              Loading...

                                              1. 1

                                              Related Categories to Roll Taps

                                              Not a MISUMI customer yet? Register & enjoy 50% off your 1st order!* (*T&C apply.)

                                              • 7 Million Products
                                              • 2,000 Brands
                                              • Free CAD downloads
                                              • Quote/order any time