(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Tooling（Spindle types：BT30）
Search by specifying the lower class category
Shrink Fit Holders
Milling Chucks
Milling Cutter Arbors
Collet Holders
Drill Chucks
Tap Holders
Collets
Tooling-Related Equipment
Presetters
Products for Coolants
| Days to Ship |
|
|---|
-
BIG DAISHOWA SEIKI
[Features]
High-quality pull bolt with durability that uses highly reliable materials.
There are JIS standard type, MAS-I type, MAS-II type, and manufacturer's standard.
[Applications]
Ideal for machining, etc.Standard Price: MYR 114.44- Days to Ship: 11 Day(s) or more -
DAISHOWA SEIKI Auto Tapping Tool B Type
BIG DAISHOWA SEIKI
[Features]
· Simple, compact and low priced.
The variation of the depth of the tap can be kept at ±0.15 mm and is ideal for work done with pipe taps and blind-hole tapping.
A best seller from the Auto Tapper series.Standard Price: MYR 2,340.26 Days to Ship: 11 Day(s) -
New Baby Chuck (Collet Chuck System)
BIG DAISHOWA SEIKI
[Features]
· Basic holder providing firm support for high precision machining for tools including drill machines, reamers and end mills.
· The collet enables increased efficiency due to its 1-micron runout accuracy at the nose.
· Robust series including short to long sizes.Standard Price: MYR 1,506.61- Days to Ship: 8 Day(s) or more -
Mega New Baby Chuck (Two-Plane Restraint, For High-Speed Rotation)
BIG DAISHOWA SEIKI
[Features]
· In addition to high accuracy and general utility, it is also capable of high-speed machining.
· New baby chuck high-speed rotation series with proven results.Standard Price: MYR 1,371.60- Days to Ship: 8 Day(s) or more -
15T/S20T/BT30/BT35 New Drill Mill Chuck
YUKIWA SEIKO
High rigidity, high precision drill mill chuck compatible with high pressure coolants
Standard Price: MYR 1,597.45- Days to Ship: 10 Day(s) or more -
Non-Magnetic Waterproof Type Point Finder i
NISSIN SANGYO
Peace of mind even in harsh working environments thanks to IP67 waterproofing (IEC standard). Measurement error will not occur even if cutting fluid is applied. ±1 μm repeat accuracy is possible up to 80 mm. Even measures non-metal workpieces.
[Features]
· In addition to features of the above-mentioned "Non-Magnetic/Waterproof Type Point Finder," measurement on non-metallic workpieces is also enabled.
· Capable of all types of measurement such as reference position setting, inner/outer diameter, centering, angle, groove width and height with high precisionStandard Price: MYR 7,118.89- Days to Ship: 6 Day(s) or more -
GIGA SELECTION
[Features]
· Can be mounted to an existing machining center (BT/HSK holder type model with through coolant function)
· Housed in a magazine, is only mounted to the main spindle by ATC when in use, and is removed in the same way
· Head nozzle is variable from 0 to ±110° (stepless and fixed)
· Equipped with a fixed bar inside the machine for varying the nozzle angle, and the angle of the arm can be changed automatically when spindle operation X, Y or Z are used so that the arm makes contact with the fixed bar
· The tip nozzle can swing up to 110° on one side, allowing coolant to also be sprayed on the front side of the spindle
· Directly mounted on the spindle so it turns when the spindle rotates, allowing repeated spraying via the XY axis
· When using a horizontal machining center, chip removal is possible in an orthogonal direction with the nozzle at 90°
· Can be used from the day it is mounted without adding any modifications to the machining center (adjust the nozzle angle manually)
· Aim the coolant spray at flat sections, including the telescopic cover and machine cover inside the machining center, to provide effective machine maintenance
· Can be used for many types of chip shapes if the tip nozzle is replaced with a straight or diffusion nozzle (R1/8)Standard Price: MYR 3,480.43 Days to Ship: 6 Day(s) or more -
Drill Chuck (With Integrated Shank)
SHOWA TOOL
Compact integrated shank. Drill chuck that is economical and easy to use.
[Features]
· Compact type with a shorter L dimension than a conventional drill chuck.
· Integrated shank that does not need to be attached or removed.
· The wrench included can be used for tightening during high-torque machining.Standard Price: MYR 1,314.64 Days to Ship: 6 Day(s) or more -
MANYO TOOLS
[Features]
·A wide variety of types are available for various cutters.
·Minimum order quantity: 1 pc.
·For SANDVIK and SECO face milling machine. A wide variety of types are available for various cutters.Standard Price: MYR 1,007.15 Days to Ship: 9 Day(s) or more -
MANYO TOOLS
[Features]
· T Series: Use the quick change holder with general-purpose milling cutters for quick-change exchange of machining center tools.
· After using a generic milling cutter, it returns to MC use
· BT Series: This product allows BT50 machines to assist the work of BT40.
· It produces BT 50 ⇔ BT 40 ⇔ BT 30 reuse.Standard Price: MYR 3,169.87 Days to Ship: 9 Day(s) or more -
BIG DAISHOWA SEIKI
[Features]
· The taper and flange face are cleaned simultaneously.Standard Price: MYR 196.79 Days to Ship: 11 Day(s) -
New High Power Milling Chuck (BBT Shank, Small Type)
BIG DAISHOWA SEIKI
[Features]
· The BIG original slit mechanism supports high power and high-precision endmilling from heavy cuts to fine cuts.Standard Price: MYR 2,044.16- Days to Ship: 11 Day(s) -
BIG DAISHOWA SEIKI
[Features]
· High accuracy collet chuck holder for end mill processing.
· High-speed and powerful with stable grip performance.
· Tapering of the chuck body section changes how machining vibration is transmitted, enhances the attenuation effect.Standard Price: MYR 1,858.00 Days to Ship: 11 Day(s) -
Mega Synchro Tapping Holder (BBT Shank)
BIG DAISHOWA SEIKI
[Features]
· Thrust load caused by synchronization error is reduced to 1/10 to improve thread precision and tap longevity.
· In addition to various tap sizes, the long tap holder is standardized.Standard Price: MYR 1,101.12 Days to Ship: 10 Day(s) -
Mega Double Power Chuck (Jet Through Type)
BIG DAISHOWA SEIKI
[Features]
The nut and body are in perfect contact.
The high stiffness body is close to being integrated with the spindle, an evolution of the milling chuck.Standard Price: MYR 2,263.78- Days to Ship: 11 Day(s) -
Mega Micro Chuck (Straight Type)
BIG DAISHOWA SEIKI
[Features]
· Supports ultra-small diameter end mill processing, this ultra-small design is the world's smallest nut with a ø10 outer diameter.
· A slim, high-speed rotation holder taking workpiece and jig interference into consideration.Standard Price: MYR 1,717.74 Days to Ship: 11 Day(s) -
Mega Micro Chuck (High Rigidity Type)
BIG DAISHOWA SEIKI
[Features]
· Supports ultra small diameter end mill processing.
· Ultra-slim design with world's smallest 10 nut outer diameter.
· Slim, high speed rotation holder designed to prevent interference with workpiece and jig.Standard Price: MYR 1,738.38- Days to Ship: 11 Day(s) -
YUKIWA SEIKO
The ultimate tool holder. Satisfies all the user's needs with high accuracy, high rigidity, high gripping force, high balance, and safety
Standard Price: MYR 1,860.23 Days to Ship: 14 Day(s) -
BT Shank CNC Keyless Drill Chuck
YUKIWA SEIKO
[Features]
· A strong grip with high accuracy.
· Machining center buddy.
· Perfect for drilling. Integral-type BT shank and chuck. Greater safety and reliability: The conventional tapered holder B and chuck are tightly fastened to prevent dropout during rotation and cutting.
· Increased power with hook wrench. No loosening even if spindle stops suddenly. Retightening with attached hook wrench increases gripping force.
· It does not loosen or slip, so safety and security are ensured for unmanned operations, etc.
· Much shorter and more compact. Short Mount Design: Taper HolderStandard Price: MYR 2,164.48 Days to Ship: 10 Day(s) -
Side Locking Holder A Type (For End Mills)
NIKKENKOSAKU
[Features]
·No chattering at taper contact of 80% or more.
·When using combat drill, code number will be SL (dedicated to drilling, compatible with center through).Standard Price: MYR 966.17 Days to Ship: 7 Day(s) or more -
NIKKENKOSAKU
[Features]The taper contact is 80% or more, and the runout accuracy is high. Keys and collars are included.
Standard Price: MYR 1,522.40 Days to Ship: 7 Day(s) or more -
Non-Magnetic Waterproof Type Point Finder
NISSIN SANGYO
Peace of mind even in harsh working environments thanks to IP67 waterproofing (IEC standard). Measurement error will not occur even if cutting fluid is applied. ±1 μm repeat accuracy is possible up to 80 mm.
[Features]
· The waterproof structure prevents the cutting fluid from entering the sensor, thus avoiding measurement errors.
· The LED will light with a small contact pressure of 0.1 gf between the stylus and the workpiece.
· Enables accurate measurement of thin workpieces. The stylus swings in the X, Y and Z directions.
· Usable for iron and non-ferrous metal workpieces.
· With the development of a new mechanism (patent pending), measurement accuracy has improved dramaticallyStandard Price: MYR 5,439.28 Days to Ship: 6 Day(s) or more -
Non-Magnetic Buzzer Specification Point Finder
NISSIN SANGYO
[Features]
· The LED will light with a small contact pressure of 0.1 gf between the stylus and the workpiece.
· Accurate measurement, even on thin workpieces.
· Includes buzzer with simultaneous electronic sound and LED to provide notification of position detection.
· Safe design that allows the stylus to swing in X/Y/Z directions.
· The measurement accuracy of metals and nonferrous metals has been dramatically improvedStandard Price: MYR 3,904.47 Days to Ship: 6 Day(s) or more -
NISSIN SANGYO
The internal switch is turned ON when the stylus makes contact. Non-conductive workpieces can also be measured.
[Features]
· Capable of all types of measurement such as reference position setting, inner/outer diameter, centering, angle, groove width and height.
· Internal contact type that can also measure non-metallic workpieces such as wood, plastic, glass or ceramics.
· With 7 shank sizes and the development of a new mechanism (patent pending), measurement accuracy has improved dramaticallyStandard Price: MYR 6,198.91- Days to Ship: 6 Day(s) or more -
Pull Circle Attachment/Removal Tool Dedicated for Pull Bolt Pull Circle (BT30)
THE CUT
[Features]
·Wrench pull round for exclusive use of pull bolts. With a shape that fits the pull bolt, the pull bolt can be attached and detached safely and securely.
·PM-BT30-T can be used with a torque wrench by attaching an adapter.
[Applications]
·Round wrench pull for pull bolt BT30Standard Price: MYR 388.70 Days to Ship: 8 Day(s) or more -
Pull Circle Attachment/Removal Tool Dedicated for Pull Bolt Adapter for Pull Circle (BT30)
THE CUT
[Features]
·Wrench pull round for exclusive use of pull bolts. With a shape that fits the pull bolt, the pull bolt can be attached and detached safely and securely.
·PM-BT-30T can be used with a torque wrench by attaching an adapter.
[Applications]
·Torque compatible adapter for pull bolt BT30Standard Price: MYR 549.28 Days to Ship: 12 Day(s) or more -
Detachment tool for pull bolt Pull round Bar for exclusive use of Pull round
THE CUT
[Features]
·Round wrench pull for pull bolt BT40.
[Applications]
·Pull-maru exclusive bar.Standard Price: MYR 127.06 Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Spindle types |
| HSK type |
| Tool Type |
| Retainable blade diameter(mm) |
| Product Category |
| Applicable Manufacturing Machinery (main unit) |
| Chuck Type |
| Holder Length L(mm) |
| Maximum Allowable Rotational Speed(min-1) |
| Coolant System |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | YUKIWA SEIKO | NISSIN SANGYO | GIGA SELECTION | SHOWA TOOL | MANYO TOOLS | MANYO TOOLS | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | YUKIWA SEIKO | YUKIWA SEIKO | NIKKENKOSAKU | NIKKENKOSAKU | NISSIN SANGYO | NISSIN SANGYO | NISSIN SANGYO | THE CUT | THE CUT | THE CUT |
| Product Series | Mega New Baby Chuck (Two-Plane Restraint, For High-Speed Rotation) | Pull Circle Attachment/Removal Tool Dedicated for Pull Bolt Pull Circle (BT30) | Pull Circle Attachment/Removal Tool Dedicated for Pull Bolt Adapter for Pull Circle (BT30) | Detachment tool for pull bolt Pull round Bar for exclusive use of Pull round | |||||||||||||||||||||||
| Days to Ship | 11 Day(s) or more | 11 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 11 Day(s) | 11 Day(s) | 11 Day(s) | 10 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 14 Day(s) | 10 Day(s) | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 12 Day(s) or more | 8 Day(s) or more |
| Spindle types | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 | BT30 |
| HSK type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Type | - | Tap | end mill / drill / Reamer | - | - | - | - | drill | Facemill | - | - | end mill | - | Tap | - | - | - | - | - | end mill | - | - | - | - | - | - | - |
| Retainable blade diameter(mm) | - | - | - | 0.25～ 6 ～ 2.5 ～20 | 0.5～10.0 ～ 2.5～16.0 | - | - | 1 to 13 | - | - | - | - | 3 to 12 | - | 16 ～ 20 | 0.45～4.05 ～ 0.45～6.05 | 0.45～3.25 ～ 2.95～8.05 | 2.0～10.0 | 0.5～13 | - | - | - | - | - | - | - | - |
| Product Category | Attachments/Accessories | Attachments/Accessories | Main Body | Main Body | Main Body | Measuring equipment | Attachments/Accessories | Main Body | Main Body | Main Body | Attachments/Accessories | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Measuring equipment | Measuring equipment | Measuring equipment | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories |
| Applicable Manufacturing Machinery (main unit) | - | - | Machining Centers | Machining Centers | Machining Centers | - | - | Machining Centers | Machining Centers | Generic Machine | - | Machining Centers | Machining Centers | Machining Centers | Machining Centers | Machining Centers | Machining Centers | Machining Centers | Machining Centers | Machining Centers | Machining Centers | - | - | - | - | - | - |
| Chuck Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Side lock | - | - | - | - | - | - | - |
| Holder Length L(mm) | - | 125 | 45 ～ 75 | 60 ～ 120 | 60 ～ 120 | - | 169 | 105.5 | - | - | - | 90 ～ 105 | 75 | 100/140/170 | 62.5 ～ 67.5 | 90 | 75 | 75 | - | 75 | 60 | - | - | - | - | - | - |
| Maximum Allowable Rotational Speed(min-1) | - | - | - | 50000 | - | - | - | - | - | - | - | - | 45000 | - | 30000 | 50000 | 50000 | - | - | - | - | - | - | - | - | - | - |
| Coolant System | - | - | Center Through (Blade Through) | - | - | - | - | - | - | - | - | Center Through (Blade Through) | - | Center Through (Blade Through) | Center Through (Blade Through) | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Spindle types
- BT30
- BT40
- BT50
- HSK-A
- HSK-E
-
HSK type
-
Tool Type
- end mill
- drill
- Reamer
- Facemill
- Tap
- Boring
-
Retainable blade diameter(mm)
- 0.25～0.50
- 0.25～ 6
- 0.3~3
- 0.4–0.5
- 0.45 ～0.55
- 0.45～3.25
- 0.45～4.05
- 0.45～6.05
- 0.5 to 0.75
- 0.50 to 0.75
- 0.5～5.0
- 0.5～ 6
- 0.5～6.5
- 0.5～7.0
- 0.5 to 8
- 0.5 ～ 8
- 0.5～8
- 0.5～ 8
- 0.5–10
- 0.5～10.0
- 0.5～13
- 0.5～13.0
- 0.55 ～0.65
- 0.6～0.7
- 0.65 ～0.75
- 0.7～0.8
- 0.75 ～0.85
- 0.75～1.0
- 0.75～1.00
- 0.8～0.9
- 0.8～6.5
- 0.85 ～0.95
- 0.9 to 1.0
- 0.95 ～1.05
- 1
- 1.0～0.5
- 1.0~1.1
- 1.0~1.25
- 1.00～1.25
- 1.0～10
- 1 to 13
- 1.05 ～1.15
- 1.15 ～1.25
- 1.2～1.3
- 1.25 ～1.35
- 1.25～1.5
- 1.25～1.50
- 1.35 ～1.45
- 1.4 to 1.5
- 1.45 ～1.55
- 1.5
- 1.5-13
- 1.5～1.0
- 1.5–1.6
- 1.50～1.75
- 1.5～1.75
- 1.5 to 10
- 1.5 ～10
- 1.5～13
- 1.55 ～1.65
- 1.6 to 1.7
- 1.65 ～1.75
- 1.7 to 1.8
- 1.75 ～1.85
- 1.75～2.0
- 1.75～2.00
- 1.8～1.9
- 1.85 ～1.95
- 1.9～2.0
- 1.95 ～2.05
- 2
- 2.0～1.5
- 2.0～2.1
- 2.0～2.25
- 2.00～2.25
- 2.0～10.0
- 2.05 ～2.15
- 2.1～2.2
- 2.15 ～2.25
- 2.2～2.3
- 2.25 ～2.35
- 2.25～2.5
- 2.25～2.50
- 2.3～2.4
- 2.35 ～2.45
- 2.4～2.5
- 2.45 ～2.55
- 2.5
- 2.5 to 2.0
- 2.5~2.6
- 2.5～2.75
- 2.50～2.75
- 2.5–3.0
- 2.5 to 13
- 2.5 ～13
- 2.5～13
- 2.5 to 16
- 2.5 ～16
- 2.5～16.0
- 2.5 ～20
- 2.5～20
- 2.55 ～2.65
- 2.6～2.7
- 2.65 ～2.75
- 2.675～3.175
- 2.7～2.8
- 2.75 ～2.85
- 2.75～3.0
- 2.75～3.00
- 2.75～3.25
- 2.8～2.9
- 2.8～3.0
- 2.85 ～2.95
- 2.9～3.0
- 2.925～3.175
- 2.95 ～3.05
- 2.95～3.05
- 2.95～8.05
- 3
- 3.0～2.5
- 3.0～3.1
- 3.00～3.25
- 3~3.5
- 3.0–3.5
- 3–4
- 3–10
- 3 to 12
- 3 to 16
- 3.0～16.0
- M3 to M16
- 3.05 ～3.15
- 3.05～3.15
- 3.1~3.2
- 3.125～3.225
- 3.15 ～3.25
- 3.15～3.25
- 3.175
- 3.2～3.3
- 3.2～3.4
- 3.25 ～3.35
- 3.25～3.35
- 3.25～3.50
- 3.25～3.75
- 3.3–3.4
- 3.35 ～3.45
- 3.35～3.45
- 3.4~3.5
- 3.40～3.50
- 3.4～3.6
- 3.45 ～3.55
- 3.45～3.55
- 3.5～3.0
- 3.5～3.6
- 3.50～3.75
- 3.5～4.0
- 3.5～20.0
- 3.55 ～3.65
- 3.55～3.65
- 3.6～3.8
- 3.65 ～3.75
- 3.65～3.75
- 3.7～3.8
- 3.75 ～3.85
- 3.75～3.85
- 3.75～4.00
- 3.75～4.25
- 3.75～ 4.25
- 3.8～3.9
- 3.8～4.0
- 3.85 ～3.95
- 3.85～3.95
- 3.9～4.0
- 3.90～4.00
- 3.95 ～4.05
- 3.95～4.05
- 4
- 4.0～3.5
- 4.0～4.1
- 4.0 to 4.2
- 4.00～4.25
- 4~4.5
- 4.0–4.5
- 4–5
- 4.05 ～4.15
- 4.05～4.15
- 4.1~4.2
- 4.15 ～4.25
- 4.15～4.25
- 4.2~4.3
- 4.2～4.4
- 4.25 ～4.35
- 4.25～4.35
- 4.25～4.50
- 4.25～4.75
- 4.25～ 4.75
- 4.3~4.4
- 4.35 ～4.45
- 4.35～4.45
- 4.4～4.5
- 4.40～4.50
- 4.4～4.6
- 4.45 ～4.55
- 4.45～4.55
- 4.5～4.0
- 4.5～4.6
- 4.50～4.75
- 4.5–5.0
- 4.55 ～4.65
- 4.55～4.65
- 4.6～4.7
- 4.6~4.8
- 4.65 ～4.75
- 4.65～4.75
- 4.7～4.8
- 4.7125～4.8125
- 4.75 ～4.85
- 4.75～4.85
- 4.75～5.00
- 4.75 to 5.25
- 4.8～4.9
- 4.8～5.0
- 4.85 ～4.95
- 4.85～4.95
- 4.9~5.0
- 4.90～5.00
- 4.95 ～5.05
- 4.95～5.05
- 5
- 5.0～4.0
- 5.0～4.5
- 5.00～5.25
- 5.0～5.5
- 5～5.5
- 5–6
- 5.0～25.0
- 5.05 ～5.15
- 5.05～5.15
- 5.1～5.2
- 5.15 ～5.25
- 5.15～5.25
- 5.2～5.3
- 5.25 ～5.35
- 5.25～5.35
- 5.25～5.50
- 5.25～5.75
- 5.3~5.4
- 5.35 ～5.45
- 5.35～5.45
- 5.4～5.5
- 5.40～5.50
- 5.45 ～5.55
- 5.45～5.55
- 5.5
- 5.5～5.0
- 5.5～5.6
- 5.50～5.75
- 5.5 to 6.0
- 5.5–6.0
- 5.55 ～5.65
- 5.55～5.65
- 5.6～5.7
- 5.65 ～5.75
- 5.65～5.75
- 5.7～5.8
- 5.75 ～5.85
- 5.75～5.85
- 5.75～6.00
- 5.8～5.9
- 5.85 ～5.95
- 5.85～5.95
- 5.9～6.0
- 5.90～6.00
- 5.95 ～6.05
- 5.95～6.05
- 6
- 6.0～5.0
- 6.0～5.5
- 6 to 6.5
- 6.0–6.5
- 6–7
- 6.05～6.15
- 6.15～6.25
- 6.2
- 6.25～6.35
- 6.35～6.45
- 6.4～6.5
- 6.45～6.55
- 6.5～6.0
- 6.5 to 7.0
- 6.55～6.65
- 6.65～6.75
- 6.75～6.85
- 6.85～6.95
- 6.9～7.0
- 6.95～7.05
- 7
- 7.0～6.0
- 7.0～6.5
- 7.0～7.5
- 7～7.5
- 7–8
- 7.05～7.15
- 7.15～7.25
- 7.25～7.35
- 7.35～7.45
- 7.4～7.5
- 7.45～7.55
- 7.5～8.0
- 7.55～7.65
- 7.65～7.75
- 7.75～7.85
- 7.85～7.95
- 7.9～8.0
- 8
- 8.0～7.0
- 8~8.5
- 8.0～8.5
- 8–9
- 8.4～8.5
- 8.5
- 8.5～9.0
- 8.9～9.0
- 9
- 9.0～8.0
- 9.0～9.5
- 9～9.5
- 9–10
- 9.4～9.5
- 9.5 to 10.0
- 9.9～10.0
- 10
- 10.0～9.0
- 10.0 ～10.5
- 10.0～10.5
- 10～10.5
- 10~11
- 10.4~10.5
- 10.5
- 10.5～11.0
- 10.9～11.0
- 11
- 11.0～10.0
- 11.0～11.5
- 11～11.5
- 11~12
- 11.4～11.5
- 11.5～12.0
- 11.9～12.0
- 12
- 12.0～11.0
- 12.0～12.5
- 12～12.5
- 12~13
- 12.4~12.5
- 12.5
- 12.5～13.0
- 12.9～13.0
- 13.0～12.0
- 13.0～13.5
- 13～14
- 13.4～13.5
- 13.5～14.0
- 13.9~14.0
- 14
- 14.0～13.0
- 14.0～14.5
- 14~15
- 14.4～14.5
- 14.5～15.0
- 14.9～15.0
- 15.0～14.0
- 15.0～15.5
- 15~16
- 15.4～15.5
- 15.5～16.0
- 15.9～16.0
- 16
- 16.0～15.0
- 16.0～16.5
- 16～17
- 16.4～16.5
- 16.5～17.0
- 16.9～17.0
- 17.0～16.0
- 17.0～17.5
- 17～18
- 17.4～17.5
- 17.5～18.0
- 17.9～18.0
- 18.0～17.0
- 18.0～18.5
- 18~19
- 18.4～18.5
- 18.5～19.0
- 18.9～19.0
- 19.0～18.0
- 19.0～19.5
- 19～20
- 19.4～19.5
- 19.5～20.0
- 19.9～20.0
- 20
- 20.0～19.0
- 22.0～21.0
- 25
- 32
- 32.0～31.0
- M36
- 50
- 100
-
Product Category
- Main Body
- Attachments/Accessories
- Heating and Cooling Equipment
- Measuring equipment
-
Applicable Manufacturing Machinery (main unit)
- Machining Centers
- Generic Machine
-
Chuck Type
- Straight collet
- Shrink fit
- Side lock
-
Holder Length L(mm)
- 15.5
- 16
- 16.5
- 19.5
- 20
- 24.5
- 25
- 26.5
- 29
- 30
- 33
- 34
- 35
- 39
- 40
- 44
- 45
- 47
- 50
- 52
- 54
- 55
- 60
- 62
- 62.5
- 67.5
- 68.5
- 70
- 74
- 75
- 80
- 81
- 84.5
- 85
- 90
- 90.5
- 91
- 93
- 95/135/165
- 96
- 97.5
- 100
- 100/140/170
- 105
- 105.5
- 109.5
- 110
- 115
- 120
- 120/160/190
- 122
- 125
- 125/175/205
- 130
- 130/180/210
- 131.5
- 132
- 135
- 137.5
- 140
- 150
- 155
- 160
- 162.5
- 164.5
- 165
- 169
- 175
- 176.5
- 180
- 180.5
- 182.5
- 185
- 186.5
- 193.5
- 195
- 200
- 220
- 250
- 300
-
Maximum Allowable Rotational Speed(min-1)
-
Coolant System
- Center Through (Blade Through)
- Gap Through
Narrow search by specifying Manufacturer
-
- BIG DAISHOWA SEIKI (11)
- NISSIN SANGYO (4)
- THE CUT (3)
- YUKIWA SEIKO (3)
- MANYO TOOLS (2)
- NIKKENKOSAKU (2)
- GIGA SELECTION (1)
- SHOWA TOOL (1)
- DREMEL (0)
- MINITOR (0)
- NAKANISHI (0)
- SUGINO MACHINE (0)
- BLUEBIRD (0)
- MARVEL (0)
- NEW STRONG (0)
- TSCHORN (0)
- TRUSCO NAKAYAMA (0)
- FUJI TOOL (0)
- KOBAYASHI IRON WORKS (0)
- MITSUTOMO (0)
- TOHIN SHOJI (0)
- NOGA JAPAN (0)
- SHINWASOKUTEI (0)
- ALBRECHT (0)
- VESSEL (0)
- VERTEX (0)
- KATO MFG (0)
- ESCO (0)
- NABEYA (0)
- NIIGATA SEIKI (SK) (0)
- TAKURA KOGU (0)
- SANDVIK (0)
- NIKKI TRADING (0)
- KASAHARA (0)
- SUMITOMO ELECTRIC HARDMETAL (0)
- FUSOSEIKI (0)
- NT TOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Tooling
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy