(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Lathe Jigs（Page2）
| Days to Ship |
|
|---|
-
MISUMI
[Features]·Lineup of compatible types for chucks made by Kitagawa in lathe processing·Since it is raw material, alteration processing is easy, and even if blade interferes with tine during processing, damage is minimal·Materials: S45C (Unhardened steel)
- Volume Discount
Standard Price: MYR 323.16- Days to Ship: 4 Day(s) or more -
MISUMI
Not quenched and can be easily processed according to the workpiece diameter. Available at an affordable price.
- Volume Discount
Standard Price: MYR 813.36- Days to Ship: 4 Day(s) or more -
Firm Shaving Chuck (Points Only)【3 Pieces Per Package】
NEW STRONG
[Features]·It can be used with Gan Chuck Bohzu (jig base) to expand the range of machining.·A set of 4.[Applications]To grasp irregularly shaped objects.
Standard Price: MYR 1,163.56- Days to Ship: 9 Day(s) or more -
Four-claws scroll chuck (One-piece claw type)
KOBAYASHI IRON WORKS
[Features]· This claw is treated with high hardness heat treatment for excellent durability.· Internal and external jaws can be exchanged.· Ideal for grasping objects from round bars to square workpieces.
Standard Price: MYR 5,506.14- Days to Ship: 10 Day(s) -
Four-claws scroll chuck (Split claw type)
KOBAYASHI IRON WORKS
[Features]· Ideal for grasping objects from round bars to square workpieces.· Rectangular workpieces can also be grasped by molding the soft jaws.
Standard Price: MYR 6,803.88- Days to Ship: 10 Day(s) -
KOBAYASHI IRON WORKS
[Features]· Stepless fine tuning minimizes soft jaw wear.· Extremely convenient for molding soft jaws with a small grip.· Demonstrates performance with soft jaw through machining.· The processing range can be enlarged by reversing the attaching direction of claws.[Applications]· Soft jaw molding jig for 3-jaw chuck.· Can be used with hydraulic, pneumatic and scroll chucks.
Standard Price: MYR 2,553.81- Days to Ship: 10 Day(s) -
Soft Jaw (for Kitagawa)【1-3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]· S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.
Standard Price: MYR 244.47- Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]· S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.
Standard Price: MYR 220.63- Days to Ship: 9 Day(s) or more -
High Jaw (for Both Howa and Kitagawa)【3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]· S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.
Standard Price: MYR 466.03- Days to Ship: 9 Day(s) or more -
TRUSCO NAKAYAMA
[Features]· S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.
Standard Price: MYR 345.90- Days to Ship: 9 Day(s) or more -
Soft Jaw (for Nikko)【1-3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]· S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.
Standard Price: MYR 244.47- Days to Ship: 9 Day(s) or more -
TRUSCO NAKAYAMA
[Features]· S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.
Standard Price: MYR 264.10- Days to Ship: 10 Day(s) -
Lathe Center With Super Carbide
FUTAMURA MACHINES & TOOLS
Used for various machines and cylindrical grinders.(Please check the part number list for details.)
Standard Price: MYR 418.16- Days to Ship: 7 Day(s) or more -
FUTAMURA MACHINES & TOOLS
[Features]· The product is designed by focusing on the super high speed rotation (7000 min-1) and high accuracy (TIR 0.003).· Carbide insert is attached on the tip part to withstand abrasion and friction due to super high speed rotation. (A type)· By using the combined angular bearing (3 places) and two types of bearings of needle bearings inside this product, it is finely designed and assembled to withstand rigidity.· The use of a unique labyrin...Readmore
Standard Price: MYR 4,972.86- Days to Ship: 11 Day(s) or more -
FUTAMURA MACHINES & TOOLS
[Features]· Angular bearing, thrust bearing and needle roller bearing are used for smooth rotation torque.· Suitable for screw cutting and edge surface processing, as A, C and E-type are fine type.· The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.
Standard Price: MYR 2,941.63- Days to Ship: 7 Day(s) or more -
FUTAMURA MACHINES & TOOLS
[Features]· Since the processing heat generated by the elongation of the workpiece is absorbed by the flat spring built into the center, there is no distortion of a workpiece and its finishing accuracy improves.· The thrust load generated by the elongation of the workpiece is also absorbed to the slide mechanism, and it is designed not to apply load to the bearing directly.
Standard Price: MYR 2,619.55- Days to Ship: 7 Day(s) or more -
FUTAMURA MACHINES & TOOLS
[Features]· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.· 2 needle bearings and 3 thrust bearings are used inside this product, and the main body diameter is designed to be small.· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.
Standard Price: MYR 984.07- Days to Ship: 7 Day(s) or more -
Rolling Center 100 With Stickers
FUTAMURA MACHINES & TOOLS
[Features]· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.· 3 bearing including 2 needle bearings and 1 thrust bearing are used inside this product, and the main body diameter is designed to be small.· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.· V seal is adopted and suitab...Readmore
Standard Price: MYR 1,645.71- Days to Ship: 7 Day(s) or more -
FUTAMURA MACHINES & TOOLS
Large bearings have been adopted and the main unit O.D. and center shaft diameter have been made thicker in order to withstand larger loads than a standard type
Standard Price: MYR 5,042.75- Days to Ship: 11 Day(s) or more -
Work Driving Center DK Claw Fixed
FUTAMURA MACHINES & TOOLS
[Features]· Ideal for gear cutting, spline processing, keyway processing, and woodworking.· There will be no need of chuck if this device is used.· As the processing items are maintained in both centers, the finishing of the processed items are the best.· Single-action detaching / attaching of processed items is possible.· By using the extraction nut, it is easy to remove from the machine.
Standard Price: MYR 3,787.09- Days to Ship: 7 Day(s) or more -
FUTAMURA MACHINES & TOOLS
[Features]· Center runout (maximum) against M.T. is TIR 0.01.· Hydraulic mechanism is adopted to the claw operation and the edge surface is maintained evenly by independent operation of the claw.· The claw and the center shaft are made of high-speed steel to achieve high durability.
Standard Price: MYR 5,983.93- Days to Ship: 7 Day(s) or more -
Work Driving Center, HD-Type Replacing Claw
FUTAMURA MACHINES & TOOLS
When the claw of the work driving center is worn and damaged, promptly replace the claw before using.
Standard Price: MYR 744.79- Days to Ship: 11 Day(s) or more -
FUTAMURA MACHINES & TOOLS
[Features]· To ensure simple use in NC machines, etc., the outer diameter (grip part) is straight.· If using a workpiece driving center, there is no need to disconnect the chuck: grip the adapter outer diameter with the chuck soft jaw. (Fully baked abrasive)
Standard Price: MYR 955.97- Days to Ship: 7 Day(s) or more -
Carbide Lathe Center TC Series
TAKURA KOGU
[Features]· With carbide tip, used with lathes to eliminate runout in machined products
Standard Price: MYR 246.28- Days to Ship: 5 Day(s) or more -
TAKURA KOGU
[Features]· With carbide tip, used with lathes to eliminate runout in machined products
Standard Price: MYR 596.77- Days to Ship: 7 Day(s) or more -
TAKURA KOGU
[Features]· With carbide tip, used with lathes to eliminate runout in machined products
Standard Price: MYR 820.40- Days to Ship: 7 Day(s) or more -
Standard Price: MYR 2,841.11- Days to Ship: 9 Day(s) or more -
NSK lathe jig rotation center LC-A type
NSK
[Features]· Since the run-out of center spindle tapered part is 5 µm or less, tapered roller bearings, thrust ball bearings, and needle bearings have been used.[Applications]· Workpiece support and runout prevention.
Standard Price: MYR 1,969.70- Days to Ship: 5 Day(s) or more -
NSK
[Features]· A buffering structure that absorbs the thermal expansion of the workpiece has been adopted, using various needle roller bearings and thrust ball bearings.[Applications]· Workpiece support and runout prevention.
Standard Price: MYR 1,834.01- Days to Ship: 5 Day(s) or more -
NSK
[Features]· Size doesn't change much from dead center and uses various types of needle roller bearings for the rotating center cap.[Applications]· Workpiece support and runout prevention.
Standard Price: MYR 1,681.25- Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]· It is all pure steel.[Applications]· Prevents runout of workpiece.
Standard Price: MYR 162.14- Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]·It has a carbide tip.·Prevents workpiece vibration.·Materials: Carbon steel for machine structure (S45C)
Standard Price: MYR 278.70- Days to Ship: 5 Day(s) or more -
Lathe Center (Long Type, with Extra-Hard Tip)
TRUSCO NAKAYAMA
[Features]· By making the lathe center longer, the distance between the workpiece and tailstock became wider, improving the work efficiency.[Applications]· Prevents runout of workpiece.
Standard Price: MYR 1,060.10- Days to Ship: 5 Day(s) or more -
"Half Center" (with Carbide Tip)
TRUSCO NAKAYAMA
[Features]· The tip of the lathe center has been cut so as not to touch the workpiece.[Applications]· Prevents center deflection.
Standard Price: MYR 1,267.78- Days to Ship: 5 Day(s) or more -
Umbrella-shaped rotating center (with bearings/TLK)
TRUSCO NAKAYAMA
[Features]· With bearing.[Applications]· As a tool for centering holes at the pipe center.
Days to Ship: 5 Day(s) or more -
Scroll Chuck (Integrated Jaw Type/Center Runout Adjustment)
KOBAYASHI IRON WORKS
Adjustable type scroll chuck.[Features]·When high precision is required or when the chuck's gripping precision has decreased, the core runout can be easily corrected·It is most suitable for use with indexing heads, but depending on the conditions of use, its functions can also be widely used on lathes, grinders, etc.
Standard Price: MYR 4,963.14- Days to Ship: 10 Day(s) -
3-Jaw Scroll Chuck (Integrated Jaw Type/Thin)
KOBAYASHI IRON WORKS
The main body is lightweight and thin and reduces interference with the cutting tool. Drill presses, index heads, milling machines, etc.
Standard Price: MYR 5,685.73- Days to Ship: 10 Day(s) or more -
3-Jaw Scroll Chuck (Split Jaw Type/Center Runout Adjustment)
KOBAYASHI IRON WORKS
Runout can be easily corrected. Indexing tables, lathes, grinding machines, etc.
Standard Price: MYR 5,989.76- Days to Ship: 10 Day(s) or more -
SC Type 6-Jaw Scroll Chuck Integrated Jaw (With Internal Jaw / External Jaw) Ordinary Type
KOBAYASHI IRON WORKS
[Features]· 6-Jaw Scroll Chuck· Integrated jaw type with internal jaw and external jaw· Rear surface mounting· Plate type· Grips pipe-shaped workpieces with little distortion.
Standard Price: MYR 9,024.72- Days to Ship: 14 Day(s) -
TC Type 2-Jaw Scroll Chuck Split Jaw (With Soft Jaw) Ordinary Type
KOBAYASHI IRON WORKS
[Features]· 2-jaw scroll chuck· Split-jaw type with soft jaw· Front surface mounting· Plate type· Ideal for gripping irregular-shaped workpieces such as valves, etc.
Standard Price: MYR 5,421.40- Days to Ship: 14 Day(s) -
TA Type 3-Jaw Scroll Chuck Split Jaw (With Hard Jaw / Soft Jaw) Direct Mounting Type
KOBAYASHI IRON WORKS
[Features]· 3-jaw scroll chuck· Split-jaw type with hard jaw and soft jaw· Direct mounting type (direct type)· Short tapered chuck that can be directly mounted on a JIS and ASA-A1/A2 spindle lathe without a plate. · Suitable for high-speed, heavy cutting due to the durable box body structure and balance correction.
Standard Price: MYR 8,232.06- Days to Ship: 14 Day(s) -
SA Type 3-Jaw Scroll Chuck Integrated Jaw (With Internal Jaw / External Jaw) Direct Mounting Type
KOBAYASHI IRON WORKS
[Features]· 3-jaw scroll chuck· Integrated jaw type with internal jaw and external jaw· Direct mounting type (direct type)· Short tapered chuck that can be directly mounted on a JIS and ASA-A1/A2 spindle lathe without a plate. · Suitable for high-speed, heavy cutting due to the durable box body structure and balance correction.
Standard Price: MYR 8,232.06- Days to Ship: 14 Day(s) -
LI Type 4-Jaw Independent Chuck (With Reversible Hard Jaws) Standard Type
KOBAYASHI IRON WORKS
[Features]· Standard-type 4-jaw single-acting chuck with the mount part the same as the JIS Standard. · Uses jaws and a screw rod made from special steel with a design that reduces backlash. · Ideal for gripping round workpieces and irregular-shaped workpieces.
Days to Ship: 11 Day(s) or more -
MI Type 4-Jaw Independent Chuck (With Reversible Hard Jaws) Direct Mounting Type
KOBAYASHI IRON WORKS
[Features]· 4-jaw single-acting short tapered chuck that can be directly mounted on a JIS and ASA-A1/A2 spindle lathe without a plate.
Standard Price: MYR 7,204.94 Days to Ship: 14 Day(s) -
LC SUS Stainless Steel Lever Chuck
KOBAYASHI IRON WORKS
[Features]· Highly versatile lever chuck for a wide-range of uses from desk lathes to drilling machines, compact milling machines and measuring instruments.
Standard Price: MYR 12,706.07- Days to Ship: 14 Day(s)
Loading...
Configure
Specification/Dimensions
-
Type
-
Mounting type
-
Compatible Chuck Nominal Size
- B-212
- B-210
- B-208
- B-206
- B-205
- B-21
- B-15
- B-12
- B-10
- B-08
- B-06
- 4
- 5
- Type B 05
- Type HJ 5
- 5、6、8
- 5～8
- 6
- Type B 06
- Type GO 6
- 6、8、10
- 6～10
- 7
- 7・8
- 8
- Type B 08
- Type H 8-46
- 8、10、12
- 8～12
- 9
- 9・10
- 10
- Type B 10
- Type GO 10
- Type H 10-67
- 12
- Type B 12
- Type HJ 12
- 14～16
- 15
- Type B 15/18
- 15～22
- 16
- 18
- 21
- Type B 21/24
- Type HJ 24
- 80
- 85
- 110
- 130
- 140
- 160
- 165
- 190
- 200
- Type B 204/205
- Type B 206
- Type B 208
- Type B 210
- Type B 212
- Type B 215
- 230
- 250
- 273
- 310
- 385
- 400
- 460
- 500
-
Jaw Height(mm)
-
Compatible Manufacturer
-
Chuck Outer Diameter(mm)
- 50
- 63
- 80
- 82
- 87
- 100
- 101.6
- 112
- 125
- 127
- 132
- 152.4
- 165
- 167
- 177.8
- 177.8・203.2
- 190
- 192
- 200
- 203.2
- 228.6
- 228.6・254
- 232
- 233
- 254
- 273
- 274
- 304.8
- 310
- 355.6～406.4
- 381
- 381～558.8
- 385
- 457.2
- 460
-
Number of Jaws
-
Shank MT No
-
Tip Carbide Insert (Y/N)
-
Tip Width Across Flat(mm)
-
Auxiliary Jig Type
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Lathe Jigs
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy