(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 9/2/2025 to 7:00 (MYT) 10/2/2025. We apologize for the inconvenience.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Plug Gauges / Screw Gauges（Product Type：Thread ring gauge）
| Days to Ship |
|
|---|
-
SOKUHANSHA
Thread gauge used for testing unified threads (coarse).
2 types are available, one for testing and the other for work.
Hardness is HRC58 to 62.Standard Price: MYR 1,107.51- Days to Ship: 6 Day(s) or more -
Ring A Grade (Conventional JIS) Parallel Thread Gauge(LG) (PF) for Pipes
OSG
[Features]
·Thread gauge for the Class A (former JIS standard-compliant).
Thread type: Parallel pipe threadStandard Price: MYR 1,146.92- Days to Ship: 9 Day(s) or more -
Standard Price: MYR 1,445.32- Days to Ship: 4 Day(s) or more -
Screw Limit Gauge (Ring Gauge)
MORIMOTO SHAFT
[Features]
· Industrial Thread Gauge
· ISO Standard
· Abrasion resistance: Quench hardening HRC 58 to 63
[Material]
· Gcr15 (SUJ2 equivalent)Standard Price: MYR 230.69- Days to Ship: 4 Day(s) or more -
Limit Screw Ring Gauge for Making Old JIS Ring
DAIICHISOKUHAN
Classic ring gauge for machining that supports previous JIS standards
Standard Price: MYR 1,445.32- Days to Ship: 6 Day(s) or more -
Limit Screw Ring Set for Testing
NIIGATA SEIKI (SK)
Essential product for checking thread precision. Screw gauge enabling easy checking of screw accuracy on the Go and No Go sides.
[Features]
· Inspects the upper limit and lower limit of the predetermined dimension accuracy of the screw part.
· Machining (GRWR) and ISO system specifications can also be manufactured.
· The gauge classifications for screw limit gauge are determined with the same grades as the screws to be measured.
· If the gauge GO side is passed through comfortably and the NO GO side does not screw in two turns or more, then the screw is judged to have passed.
[Applications]
· Used for inspecting screws.Standard Price: MYR 1,286.70- Days to Ship: 4 Day(s) or more -
Standard Screw Gauge (SG) Metric (M) Screw J Class Set Product
OSG
[Features]
· An accurately made gauge based on standard screw pitch and standard screw dimensions.Standard Price: MYR 1,117.21- Days to Ship: 5 Day(s) or more -
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Medium], JIS (ISO Grade), Ring](//my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431689.jpg?$product_view_b$)
Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Medium], JIS (ISO Grade), Ring
OSG
[Features]
Accuracy: 6 G, 6H
Thread type: Metric thread Fitting class: MiddleStandard Price: MYR 745.84- Days to Ship: 5 Day(s) or more -
Screw Limit Gauge (LG), Metric (M) Screw, Class 2 (Old JIS), Ring
OSG
[Features]
·Class 2 (former JIS standard compliant)
·Thread gauge, metric threadStandard Price: MYR 745.84- Days to Ship: 5 Day(s) or more -
Limit Screw Ring Gauge for Old JIS Ring Test
DAIICHISOKUHAN
Classic ring gauge for inspections that supports previous JIS standards
Standard Price: MYR 1,445.32- Days to Ship: 6 Day(s) or more -
Tapered Pipe Thread Gauge (NPT)
SOKUHANSHA
[Features]
· American standard (ANSI) pipe taper thread gauge used for inspecting pipe taper threads (NPT) for general components requiring sealing.
· These gauges come with various notching; however, the one most commonly used has notches in 3 locations: minimum position, reference position and maximum position.
· When a gauge is screwed in by hand to a pipe taper screw, if the pipe end is within the range of the maximum limit position and minimum limit position notch, it will pass.
· For NPT, the height of the ridge cutout for the screw outer and inner diameters are regulated; using an NPT plane taper gauge for this inspection is recommended.
· Dimensional inspection of outer or inner diameter can be easily performed by aligning the three notches on the taper thread gauge and the six notches on the plain taper gauge.Standard Price: MYR 3,474.70- Days to Ship: 6 Day(s) or more -
Screw Limit Gauge (LG), Metric (M) Screw, Class 3 (Old JIS), Ring
OSG
[Features]
·Thread gauge for the Class 3 (former JIS standard-compliant).
Accuracy: 3
Thread type: Metric threadStandard Price: MYR 745.84- Days to Ship: 5 Day(s) or more -
Screw Limit Gauge (LG), Unified (U) Screw, Class 3A (Old JIS), Ring
OSG
[Features]
·Thread gauge for the Class 3A (former JIS standard-compliant).
Accuracy: 3 AStandard Price: MYR 827.55- Days to Ship: 5 Day(s) or more -
Screw Limit Gauge (LG), Unified (U) Screw, Class 2A (Old JIS), Ring
OSG
[Features]
·Limit gauge unified thread for the Class 2A (former JIS standard-compliant).Standard Price: MYR 827.55- Days to Ship: 5 Day(s) or more -
![Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, [Fitting Classification: Medium], JIS (ISO Grade), Ring](//my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431667.jpg?$product_view_b$)
OSG
[Features]
·Left-hand thread Fitting class: Middle
Accuracy: 6 G
Thread type: Metric threadStandard Price: MYR 953.81- Days to Ship: 9 Day(s) or more -
Screw Limit Gauge (LG), Metric (M) Screw, Class 1 (Old JIS), Ring
OSG
[Features]
·Limit gauge metric thread for the Class 1 (former JIS standard-compliant).Standard Price: MYR 857.25- Days to Ship: 9 Day(s) or more -
Taper Thread Gauge(TG) for Pipes and Taper (NPT) Thread for American Style Pipes Ring
OSG
[Features]
· American standard (ANSI) pipe taper thread gauge.Standard Price: MYR 1,986.22- Days to Ship: 9 Day(s) or more -
Taper Thread Gauge(TG) and Taper Thread Gauge(PT) (Conventional JIS) Ring
OSG
[Features]
· Screw gauge used for inspecting tapered pipe screws and for testing parallel female screws that fit to tapered screws.Standard Price: MYR 1,540.57- Days to Ship: 9 Day(s) or more -
Taper Thread Gauge(TG) and Taper Thread (R) JIS (ISO Certified) Ring
OSG
[Features]
· Screw gauge used for inspecting tapered pipe screws and for testing parallel female screws that fit to tapered screws.Standard Price: MYR 1,986.22- Days to Ship: 4 Day(s) or more -
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Ring](//my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223004978702_002.jpg?$product_view_b$)
Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Ring
OSG
Product type: Thread plug gauge
Thread type: Metric thread Accuracy: 4HStandard Price: MYR 857.25- Days to Ship: 9 Day(s) or more -
Limit Screw Ring Gauges, ISO Method JISB0251/0252
SOKUHANSHA
[Features]
· Uses the limit system, the most common method for parallel screw gauges, in which the accuracy is guaranteed by managing the limit of the product screws for through/blind.
· There are two basic limit types: the ISO classification gauge type and the conventional JIS classification gauge type.
· The conventional JIS gauge system distinguished inspection and machining on the gauge no-go side, but the ISO gauge system is simplified, removing this distinction.
· Scissors-type gauge for exterior use is the same.Standard Price: MYR 938.37- Days to Ship: 6 Day(s) or more -
Parallel Pipe Thread Limit Ring Gauge (G)
SOKUHANSHA
[Features]
· A screw gauge used for inspection of screws (G) primarily for mechanical connections that do not require sealing, newly created by JIS after introduction of the ISO gauge standard.Standard Price: MYR 1,805.31- Days to Ship: 4 Day(s) or more -
Tapered Pipe Thread Ring Gauge
SOKUHANSHA
[Features]
· A tapered screw gauge used for inspection of screws (R, Rc, Rp) primarily for mechanical connections that require sealing, newly established by JIS after introduction of the ISO gauge standard.
· The R and PT product screws are identical in terms of their dimensions, but the gauge systems used are different.
· If the pipe or pipe fitting end are within the range of the gauge notch length, it will pass.
· The difference from the conventional pipe taper thread gauge PT is as follows.
· Wear limit of tapered thread ring gauge: Wear limit has been regulated for the tapered thread ring gauge.
· Inspection plug: Wear limit is inspected with the inspection plug for tapered screws (CP).Standard Price: MYR 1,700.43- Days to Ship: 4 Day(s) or more -
Tapered Pipe Thread Gauge (PT)
SOKUHANSHA
A gauge used for inspecting screws (PT) whose main purpose is mechanical connection where sealing is required, for the connection of pipes, parts for pipes, fluidic devices, etc.
Standard Price: MYR 2,102.08- Days to Ship: 4 Day(s) or more -
![Screw Limit Gauge (LG), Unified (U) Screw [Special Number of Screw Threads: UN], Class 2A (Old JIS), Ring](//my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223006813139.jpg?$product_view_b$)
OSG
[Features]
·Thread gauge for the Class 2A accuracy (former JIS standard-compliant), unified thread.Standard Price: MYR 1,087.50- Days to Ship: 9 Day(s) or more -
Parallel Thread Gauge (LG) (G) A Grade JIS (ISO Certified) for Pipes Plug
OSG
[Features]
·Thread gauge for the Class A in JIS standards (ISO class).
Thread type: Parallel pipe thread: Accuracy: AStandard Price: MYR 1,265.76- Days to Ship: 5 Day(s) or more -
Standard Screw Gauge (SG) Whitworth (W) Screw J Class Set Product
OSG
[Features]
· An accurately made gauge based on standard screw pitch and standard screw dimensions.Standard Price: MYR 1,882.24- Days to Ship: 9 Day(s) or more -
Standard Screw Gauge (SG) Metric (M) Screw J Class Set Ring
OSG
[Features]
· An accurately made gauge based on standard screw pitch and standard screw dimensions.Standard Price: MYR 749.55- Days to Ship: 9 Day(s) or more -
Ring B Grade (Conventional JIS) Parallel Thread Gauge(LG) (PF) for Pipes
OSG
[Features]
·Thread gauge for the Class B (former JIS standard-compliant).
Accuracy: B
Thread type: Parallel pipe threadStandard Price: MYR 1,139.49- Days to Ship: 9 Day(s) or more -
Screw Limit Gauge (LG), Sewing Machine (SM) Screw, Class 2 (Old JIS), Ring
OSG
[Features]
·Thread gauge for the Class 2 (former JIS standard-compliant).
Accuracy: 2
Thread type: Sewing-machine threadStandard Price: MYR 1,154.35- Days to Ship: 9 Day(s) or more -
Screw Limit Gauge (LG), Whitworth (W) Screw, Left Thread, Class 2 (Old JIS), Ring
OSG
[Features]
·Thread gauge for the Class 2 (former JIS standard-compliant).
Accuracy: 2
Left thread: ○
Thread type: Whitworth threadStandard Price: MYR 1,570.29- Days to Ship: 9 Day(s) or more -
Screw Limit Gauge (LG), Metric (M) Screw, for Pre-Plating, Class 2 -0.03 (Old JIS), Ring
OSG
[Features]
・ For pre-plating.
Accuracy: 2-0.03
Thread type: Metric threadStandard Price: MYR 938.95- Days to Ship: 9 Day(s) or more -
Screw Limit Gauge (LG), Whitworth (W) Screw, Class 2 (Old JIS), Ring
OSG
[Features]
·Limit gauge Whitworth thread for the Class 2 (former JIS standard-compliant).Standard Price: MYR 1,258.33- Days to Ship: 9 Day(s) or more -
Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, Class 2 (Old JIS), Ring
OSG
[Features]
·Left-hand thread gauge, metric thread for the Class 2 (former JIS standard-compliant).Standard Price: MYR 938.95- Days to Ship: 9 Day(s) or more -
Taper Thread Gauge(TG) for Pipes and Taper (NPTF) Thread L1 for American Style Pipes Ring
OSG
[Features]
· American standard (ANSI) pipe taper thread gauge.Standard Price: MYR 2,179.34- Days to Ship: 9 Day(s) or more -
Set of Taper Thread Gauge(TG) for Pipes and Taper (NPTF) Thread L1 for American Style Pipes
OSG
[Features]
· American standard (ANSI) pipe taper thread gauge.Standard Price: MYR 3,635.12- Days to Ship: 9 Day(s) or more -
Set of Taper Thread Gauge(TG) for Pipes and Taper (NPT) Thread for American Style Pipes
OSG
[Features]
· American standard (ANSI) pipe taper thread gauge.Standard Price: MYR 3,308.31- Days to Ship: 9 Day(s) or more -
Set of Taper Thread Gauge(TG) and Taper Thread (R) JIS (ISO Certified)
OSG
[Features]
· Screw gauge used for inspecting tapered pipe screws and for testing parallel female screws that fit to tapered screws.Standard Price: MYR 3,308.31- Days to Ship: 9 Day(s) or more -
Ring B Grade (Conventional JIS) Parallel Thread Gauge(LG) (PS) for Pipes
OSG
Conventionally JIS standard compliant.
Product type: Thread ring gauge
Thread type: Parallel pipe threadStandard Price: MYR 1,146.92- Days to Ship: 9 Day(s) or more -
Set of Taper Thread Gauge(TG) and Taper Thread Gauge(PT) (Conventional JIS) for Pipes
OSG
[Features]
· Screw gauge used for inspecting tapered pipe screws and for testing parallel female screws that fit to tapered screws.Standard Price: MYR 2,550.71- Days to Ship: 9 Day(s) or more -
Standard Screw Gauge (SG) Parallel Screw for Pipes (PF/PS) J Class Ring
OSG
[Features]
· An accurately made gauge based on standard screw pitch and standard screw dimensions.Standard Price: MYR 1,143.21- Days to Ship: 9 Day(s) or more -
Standard Screw Gauge (SG) Parallel Screw for Pipes (PF/PS) J Class Set Product
OSG
[Features]
· An accurately made gauge based on standard screw pitch and standard screw dimensions.Standard Price: MYR 1,711.41- Days to Ship: 9 Day(s) or more -
Standard Screw Gauge (SG) Whitworth (W) Screw J Class Ring
OSG
[Features]
· An accurately made gauge based on standard screw pitch and standard screw dimensions.Standard Price: MYR 1,256.90- Days to Ship: 9 Day(s) or more -
Limit Thread Ring Gauge JIS B0251 and 0252 (Annex)
SOKUHANSHA
[Features]
· The gauge classifications for screw limit gauge are determined with the same grades as the screws to be measured.
· This gauge is called a limit thread gauge since it uses the upper limit and lower limit of the predetermined dimension accuracy of the screw part using 2 screws with different dimensions, through and blind, for inspection.
· For the usage method, a gauge is considered to have passed the grade inspection when the screw thread limit gauge's go gauge can pass through without difficulty and the no-go gauge cannot be screwed in by more than two rotations.
· In addition to mass-producing limit screw gauges according to JIS standards, the manufacturer can also design and manufacture screw gauges to conform with any standard.Standard Price: MYR 936.13- Days to Ship: 4 Day(s) or more -
Parallel Pipe Thread Limit Ring Gauge (PF)
SOKUHANSHA
[Features]
· A screw gauge used for inspection of screws (G) primarily for mechanical connections that do not require sealing, newly created by JIS after introduction of the ISO gauge standard.
· The difference from the conventional pipe parallel thread gauge PF is as follows.
· Classification y/n.
· A screw gauge grade for female screws is not available.
· Male thread gauges are classified as Grade A or Grade B.
· Note that GR is for both Grade A and Grade B.
· The distinction between use for inspection and use for manufacturing has been eliminated for both through and blind sides.
· Determination of pass/fail for thread ring gauge.Standard Price: MYR 1,659.01- Days to Ship: 6 Day(s) or more
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Medium], JIS (ISO Grade), Ring](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431689.jpg?$product_view_b$)
![Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, [Fitting Classification: Medium], JIS (ISO Grade), Ring](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431667.jpg?$product_view_b$)
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Ring](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223004978702_002.jpg?$product_view_b$)
![Screw Limit Gauge (LG), Unified (U) Screw [Special Number of Screw Threads: UN], Class 2A (Old JIS), Ring](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223006813139.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Nominal |
| Pitch P |
| Workpiece |
| Class |
| Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SOKUHANSHA | OSG | DAIICHISOKUHAN | MORIMOTO SHAFT | DAIICHISOKUHAN | NIIGATA SEIKI (SK) | OSG | OSG | OSG | DAIICHISOKUHAN | SOKUHANSHA | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | SOKUHANSHA | SOKUHANSHA |
| Product Series | Ring A Grade (Conventional JIS) Parallel Thread Gauge(LG) (PF) for Pipes | Standard Screw Gauge (SG) Metric (M) Screw J Class Set Product | Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Medium], JIS (ISO Grade), Ring | Screw Limit Gauge (LG), Metric (M) Screw, Class 2 (Old JIS), Ring | Screw Limit Gauge (LG), Metric (M) Screw, Class 3 (Old JIS), Ring | Screw Limit Gauge (LG), Unified (U) Screw, Class 3A (Old JIS), Ring | Screw Limit Gauge (LG), Unified (U) Screw, Class 2A (Old JIS), Ring | Screw Limit Gauge (LG), Metric (M) Screw, Class 1 (Old JIS), Ring | Taper Thread Gauge(TG) for Pipes and Taper (NPT) Thread for American Style Pipes Ring | Taper Thread Gauge(TG) and Taper Thread Gauge(PT) (Conventional JIS) Ring | Taper Thread Gauge(TG) and Taper Thread (R) JIS (ISO Certified) Ring | Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Ring | Parallel Thread Gauge (LG) (G) A Grade JIS (ISO Certified) for Pipes Plug | Standard Screw Gauge (SG) Whitworth (W) Screw J Class Set Product | Ring B Grade (Conventional JIS) Parallel Thread Gauge(LG) (PF) for Pipes | Screw Limit Gauge (LG), Sewing Machine (SM) Screw, Class 2 (Old JIS), Ring | Screw Limit Gauge (LG), Whitworth (W) Screw, Left Thread, Class 2 (Old JIS), Ring | Screw Limit Gauge (LG), Metric (M) Screw, for Pre-Plating, Class 2 -0.03 (Old JIS), Ring | Screw Limit Gauge (LG), Whitworth (W) Screw, Class 2 (Old JIS), Ring | Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, Class 2 (Old JIS), Ring | Taper Thread Gauge(TG) for Pipes and Taper (NPTF) Thread L1 for American Style Pipes Ring | Set of Taper Thread Gauge(TG) for Pipes and Taper (NPTF) Thread L1 for American Style Pipes | Set of Taper Thread Gauge(TG) for Pipes and Taper (NPT) Thread for American Style Pipes | Set of Taper Thread Gauge(TG) and Taper Thread (R) JIS (ISO Certified) | Ring B Grade (Conventional JIS) Parallel Thread Gauge(LG) (PS) for Pipes | Set of Taper Thread Gauge(TG) and Taper Thread Gauge(PT) (Conventional JIS) for Pipes | Standard Screw Gauge (SG) Parallel Screw for Pipes (PF/PS) J Class Ring | Standard Screw Gauge (SG) Parallel Screw for Pipes (PF/PS) J Class Set Product | |||||||||||||||||
| Days to Ship | 6 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more |
| Product Type | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge |
| Nominal | 0.073-Inch models ～ 1.5-Inch models | PF1-11 ～ PF7/8-14 | 2 ～ 16 | M2 ～ M42 | 2 ～ 20 | M2 ～ M20 | M1.4X0.3 ～ M60X5.5 | M1X0.2 ～ M50X3 | M1X0.2 ～ M130X6 | 2 ～ 20 | 1 ～ 4 | M2X0.4 ～ M16X2 | 1-12UNF ～ NO12-24UNC | NO0-80UNF ～ NO12-24UNC | M1.4X0.3-L ～ M30X3.5-L | M2X0.4 ～ M36X4 | 1-11-1/2NPT ～ 4-8NPT | PT1-11 ～ PT7/8-14 | R1-11 ～ R3/8-19 | M2X0.4 ～ M36X4 | 1.4 ～ 20 | 1 ～ 7/8 | 1 ～ 3/8 | 1 ～ 4 | 1-5/8-8UN ～ 4-1/2-8UN | G1-11 ～ G7/8-14 | W1-8 ～ W7/16-14 | M1.4X0.3 ～ M60X5.5 | PF1-11 ～ PF3/8-19 | SM1/4-40 ～ SM15/64-28 | W1-8-L ～ W7/8-9-L | M2X0.4 ～ M20X2.5 | W1-8 ～ W9/16-12 | M1.4X0.3-L ～ M30X3.5-L | 1-11-1/2NPTF ～ 3/8-18NPTF | 1-11-1/2NPTF ～ 3/8-18NPTF | 1-11-1/2NPT ～ 4-8NPT | R1-11 ～ R3/8-19 | PS1-11 ～ PS7/8-14 | PT1-11 ～ PT7/8-14 | PF1-11 ～ PS7/8-14 | PF1-11 ～ PS7/8-14 | W1-8 ～ W7/16-14 | 1.4 ～ 58 | 1 ～ 7/8 |
| Pitch P | Ridge 12 ～ Ridge 72 | - | 0.4 ～ 1.75 | 0.4 ～ 4 | 0.4 ～ 2.5 | 0.4 ～ 2.5 | - | - | - | 0.4 ～ 2.5 | Ridge 8 ～ Ridge 27 | - | - | - | - | - | - | - | - | - | 0.3 ～ 2.5 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.25 ～ 3.5 | Ridge 11 ～ Ridge 28 |
| Workpiece | Male thread | - | Male thread | - | Male thread | Female Thread | - | - | - | Male thread | Female Thread/Male Screw Set | - | - | - | - | - | - | - | - | - | Male thread | Male thread | Male thread | Female Thread/Male Screw Set | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Male thread | Male thread |
| Class | 2A | - | 6g | Equivalent to Former JIS2 Grade | For JIS Grade 2 Screw | - | - | - | - | For JIS Grade 2 Screw | - | - | - | - | - | - | - | - | - | - | 6g ～ 6h | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Class 2 | - |
| Standard | - | - | Other | - | JIS Standard | - | - | - | - | JIS Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | JIS Standard | - |
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Medium], JIS (ISO Grade), Ring](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431689.jpg?$product_view_c$)
![Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, [Fitting Classification: Medium], JIS (ISO Grade), Ring](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431667.jpg?$product_view_c$)
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Ring](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223004978702_002.jpg?$product_view_c$)
![Screw Limit Gauge (LG), Unified (U) Screw [Special Number of Screw Threads: UN], Class 2A (Old JIS), Ring](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223006813139.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Product Type
- Thread ring gauge
- Thread Plug Gauge
- Limit Plug Gauge
- Thread Pin Gauge
-
Nominal
- NO0-80UNF
- 0.073-Inch models
- 0.086-Inch models
- 0.099-Inch models
- No.10-32UNF
- No.10-24UNC
- 0.112-Inch models
- 0.1155
- No.12-28UNF
- No.12-24UNC
- 0.125-Inch models
- 0.138-Inch models
- 0.164-Inch models
- 0.19-Inch models
- 0.216-Inch models
- 0.25-Inch models
- 0.3125-Inch models
- 0.375-Inch models
- No.4-40UNC
- 0.4375-Inch models
- 0.5-Inch models
- No.5-40UNC
- 0.5625-Inch models
- No.6-40UNF
- No.6-32UNC
- 0.625-Inch models
- 0.6875-Inch models
- No.8-36UNF
- No.8-32UNC
- 0.875-Inch models
- 1
- 1-Inch models
- 1
- 1 inch
- M1
- NO1-72UNF
- NO1-64UNC
- 1-14UNS
- 1-12UNF
- G1-11
- PF1-11
- PS1-11
- PT1-11
- R1-11
- 1-11-1/2NPT
- 1-11-1/2NPTF
- 1-8UNC
- W1-8
- W1-8-L
- W1-7/8-4-1/2
- 1-5/8-8UN
- W1-5/8-5
- 1-5/16-12UN
- PF1-3/4-11
- PS1-3/4-11
- PT1-3/4-11
- 1-3/4-8UN
- 1-3/4-5UNC
- W1-3/4-5
- 1-3/8-12UNF
- 1-3/8-8UN
- 1-3/8-6UNC
- W1-3/8-6
- 1-3/16-12UN
- 1-1/2
- 1-1/2-12UNF
- G1-1/2-11
- PF1-1/2-11
- PS1-1/2-11
- PT1-1/2-11
- R1-1/2-11
- 1-1/2-11-1/2NPT
- 1-1/2-11-1/2NPTF
- 1-1/2-8UN
- 1-1/2-6UNC
- W1-1/2-6
- 1-1/4
- 1-1/4-12UNF
- G1-1/4-11
- PF1-1/4-11
- PS1-1/4-11
- PT1-1/4-11
- R1-1/4-11
- 1-1/4-11-1/2NPT
- 1-1/4-11-1/2NPTF
- 1-1/4-8UN
- 1-1/4-7UNC
- W1-1/4-7
- 1-1/8-12UNF
- PF1-1/8-11
- PS1-1/8-11
- 1-1/8-8UN
- 1-1/8-7UNC
- W1-1/8-7
- 1-1/16-12UN
- M1X0.2
- M1X0.25
- 1 1/2
- 1 1/4
- 1 1/8
- 1/2
- 1/2-32UN
- 1/2-20UNF
- 1/2-14NPT
- 1/2-14NPTF
- G1/2-14
- PF1/2-14
- PS1/2-14
- PT1/2-14
- R1/2-14
- 1/2-13UNC
- W1/2-12
- W1/2-12-L
- 1 3/4
- 1/4
- SM1/4-40
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- W1/4-20
- W1/4-20-L
- G1/4-19
- PF1/4-19
- PS1/4-19
- PT1/4-19
- R1/4-19
- 1/4-18NPT
- 1/4-18NPTF
- 1/8
- SM1/8-44
- SM1/8-40
- W1/8-40
- G1/8-28
- PF1/8-28
- PS1/8-28
- PT1/8-28
- R1/8-28
- 1/8-27NPT
- 1/8-27NPTF
- 1/16
- W1/16-60
- PT1/16-28
- R1/16-28
- 1/16-27NPT
- 1/16-27NPTF
- M1.1X0.2
- M1.1X0.25
- 1.125-Inch models
- M1.2X0.2
- M1.2X0.25
- 1.25-Inch models
- 1.375-Inch models
- 1.4
- M1.4
- M1.4X0.2
- M1.4X0.3
- M1.4X0.3-L
- 1.5-Inch models
- 1.5 inches
- 1.6
- M1.6X0.2
- M1.6X0.35
- 1.7
- M1.7X0.2
- M1.7X0.35
- M1.7X0.35-L
- 1.75-Inch models
- 1.8
- M1.8X0.2
- M1.8X0.35
- 2
- 2
- 2 inches
- M2
- NO2-64UNF
- NO2-56UNC
- G2-11
- PF2-11
- PS2-11
- PT2-11
- R2-11
- 2-11-1/2NPT
- 2-11-1/2NPTF
- 2-8UN
- 2-4-1/2UNC
- W2-4-1/2
- PF2-1/2-11
- PS2-1/2-11
- PT2-1/2-11
- 2-1/2-8NPT
- 2-1/2-8UN
- PF2-1/4-11
- PS2-1/4-11
- M2X0.25
- M2X0.4
- M2X0.4-L
- 2 1/2
- 2 1/4
- 2 3/4
- 2.2
- M2.2X0.25
- M2.2X0.45
- 2.3
- M2.3
- M2.3X0.25
- M2.3X0.4
- 2.5
- M2.5
- M2.5X0.35
- M2.5X0.45
- M2.5X0.45-L
- 2.6
- M2.6
- M2.6X0.35
- M2.6X0.45
- M2.6X0.45-L
- 3
- 3
- M3
- φ3
- NO3-56UNF
- NO3-48UNC
- PF3-11
- PS3-11
- PT3-11
- 3-8NPT
- 3-8UN
- PF3-1/2-11
- PT3-1/2-11
- 3-1/2-8NPT
- 3-1/2-8UN
- M3X0.35
- M3X0.5
- M3X0.5-L
- M3X0.6
- M3X0.6-L
- 3 1/2
- 3/4
- 3/4-16UNF
- 3/4-14NPT
- 3/4-14NPTF
- G3/4-14
- PF3/4-14
- PS3/4-14
- PT3/4-14
- R3/4-14
- 3/4-10UNC
- W3/4-10
- W3/4-10-L
- 3/8
- 3/8-32UNEF
- 3/8-24UNF
- G3/8-19
- PF3/8-19
- PS3/8-19
- PT3/8-19
- R3/8-19
- 3/8-18NPT
- 3/8-18NPTF
- 3/8-16UNC
- W3/8-16
- W3/8-16-L
- SM3/16-32
- SM3/16-28
- W3/16-24
- SM3/32-56
- 3.5
- M3.5
- M3.5X0.35
- M3.5X0.6
- 4
- 4
- M4
- φ4
- NO4-48UNF
- NO4-40UNC
- PF4-11
- PT4-11
- 4-8NPT
- 4-8UN
- 4-3/4-8UN
- 4-1/2-8UN
- M4X0.5
- M4X0.7
- M4X0.7-L
- M4X0.75
- M4X0.75-L
- 4.5
- M4.5X0.5
- M4.5X0.75
- 5
- 5
- M5
- φ5
- NO5-44UNF
- NO5-40UNC
- PT5-11
- M5X0.5
- M5X0.75
- M5X0.8
- M5X0.8-L
- M5X0.9
- M5X0.9-L
- 5/8
- 5/8-24UNEF
- 5/8-18UNF
- G5/8-14
- PF5/8-14
- PS5/8-14
- PT5/8-14
- 5/8-11UNC
- W5/8-11
- W5/8-11-L
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- W5/16-18
- W5/16-18-L
- 5.5
- M5.5X0.5
- M5.5X0.75
- M5.5X0.9
- 6
- 6
- M6
- φ6
- NO6-40UNF
- NO6-32UNC
- M6X0.5
- M6X0.75
- M6X1
- M6X1.0
- M6X1-L
- 7
- 7
- M7
- φ7
- M7X0.5
- M7X0.75
- M7X1
- M7X1-L
- 7/8
- 7/8-14UNF
- G7/8-14
- PF7/8-14
- PS7/8-14
- PT7/8-14
- 7/8-9UNC
- W7/8-9
- W7/8-9-L
- 7/16-20UNF
- 7/16-14UNC
- W7/16-14
- 8
- 8
- M8
- φ8
- NO8-36UNF
- NO8-32UNC
- M8X0.5
- M8X0.75
- M8X1
- M8X1.25
- M8X1.25-L
- 9
- 9
- φ9
- M9X0.5
- M9X0.75
- M9X1
- M9X1.25
- M9X1.25-L
- 9/16-18UNF
- 9/16-12UNC
- W9/16-12
- SM9/64-40
- 10
- M10
- φ10
- NO10-32UNF
- NO10-24UNC
- M10X0.5
- M10X0.75
- M10X1
- M10X1.25
- M10X1.25-L
- M10X1.5
- M10X1.5-L
- 11
- φ11
- M11X0.5
- M11X0.75
- M11X1
- M11X1.25
- M11X1.5
- M11X1.5-L
- SM11/64-40
- 12
- M12
- φ12
- NO12-28UNF
- NO12-24UNC
- M12X0.5
- M12X0.75
- M12X1
- M12X1.25
- M12X1.25-L
- M12X1.5
- M12X1.5-L
- M12X1.75
- M12X1.75-L
- 13
- φ13
- M13X0.5
- M13X0.75
- M13X1
- M13X1.25
- M13X1.5
- M13X1.75
- 14
- M14
- φ14
- M14X0.5
- M14X0.75
- M14X1
- M14X1.25
- M14X1.25-L
- M14X1.5
- M14X1.5-L
- M14X2
- M14X2-L
- 15
- φ15
- M15X0.5
- M15X0.75
- M15X1
- M15X1.5
- M15X2
- SM15/64-28
- 16
- M16
- φ16
- M16X0.5
- M16X0.75
- M16X1
- M16X1.25
- M16X1.5
- M16X1.5-L
- M16X2
- M16X2-L
- 17
- φ17
- M17X0.75
- M17X1
- M17X1.5
- 18
- M18
- φ18
- M18X0.5
- M18X0.75
- M18X1
- M18X1.5
- M18X1.5-L
- M18X2
- M18X2.5
- M18X2.5-L
- 19
- φ19
- M19X1
- M19X1.5
- M19X2.5
- 20
- M20
- φ20
- M20X0.5
- M20X1
- M20X1.25
- M20X1.5
- M20X1.5-L
- M20X2
- M20X2.5
- M20X2.5-L
- 21
- φ21
- 22
- M22
- φ22
- M22X0.5
- M22X1
- M22X1.5
- M22X1.5-L
- M22X2
- M22X2.5
- M22X2.5-L
- 23
- φ23
- 24
- M24
- φ24
- M24X0.5
- M24X1
- M24X1.5
- M24X1.5-L
- M24X2
- M24X3
- M24X3-L
- 25
- φ25
- M25X0.5
- M25X1
- M25X1.5
- M25X2
- 26
- φ26
- M26X0.5
- M26X1
- M26X1.5
- M26X1.5-L
- M26X2
- M26X3
- 27
- M27
- φ 27
- M27X1
- M27X1.5
- M27X1.5-L
- M27X2
- M27X3
- M27X3-L
- 28
- φ28
- M28X0.5
- M28X1
- M28X1.25
- M28X1.5
- M28X1.5-L
- M28X2
- M28X3
- 29
- φ29
- 30
- M30
- φ30
- M30X0.5
- M30X1
- M30X1.5
- M30X1.5-L
- M30X2
- M30X3
- M30X3.5
- M30X3.5-L
- 31
- φ 31
- 32
- φ32
- M32X0.5
- M32X1
- M32X1.5
- M32X2
- M32X3
- 33
- M33
- φ33
- M33X1.5
- M33X2
- M33X3
- M33X3.5
- 34
- φ34
- M34X0.5
- M34X1
- M34X1.5
- M34X2
- 35
- φ35
- M35X1.5
- M35X3
- 36
- M36
- φ 36
- M36X0.5
- M36X1
- M36X1.5
- M36X2
- M36X3
- M36X4
- 37
- φ37
- 38
- φ38
- M38X0.5
- M38X1
- M38X1.5
- M38X2
- M38X3
- 39
- M39
- φ39
- M39X1.5
- M39X2
- M39X3
- M39X4
- 40
- φ40
- M40X1
- M40X1.5
- M40X2
- M40X3
- 41
- 42
- M42
- M42X1
- M42X1.5
- M42X2
- M42X3
- M42X4
- M42X4.5
- 43
- 44
- 45
- M45X1
- M45X1.5
- M45X2
- M45X3
- M45X4
- M45X4.5
- 46
- M46X1.5
- 47
- 48
- M48X1
- M48X1.5
- M48X2
- M48X3
- M48X4
- M48X5
- 49
- 50
- M50X1
- M50X1.5
- M50X2
- M50X3
- 52
- M52X1.5
- M52X2
- M52X3
- M52X4
- M52X5
- M54X4
- 55
- M55X1.5
- M55X2
- M55X3
- M55X4
- 56
- M56X1.5
- M56X2
- M56X3
- M56X4
- M56X5.5
- 58
- M58X1.5
- M58X2
- M58X3
- M58X4
- 60
- M60X1.5
- M60X2
- M60X3
- M60X4
- M60X5.5
- M62X1.5
- M62X2
- M62X3
- M62X4
- M64X1.5
- M64X2
- M64X3
- M64X4
- M64X6
- M65X1.5
- M65X2
- M65X3
- M65X4
- M68X1.5
- M68X2
- M68X3
- M68X4
- M68X6
- M70X1.5
- M70X2
- M70X3
- M70X4
- M70X6
- M72X1.5
- M72X2
- M72X3
- M72X4
- M72X6
- M75X1.5
- M75X2
- M75X3
- M75X4
- M76X1.5
- M76X2
- M76X3
- M76X4
- M76X6
- M78X2
- M80X1.5
- M80X2
- M80X3
- M80X6
- M82X2
- M85X1.5
- M85X2
- M85X3
- M85X4
- M90X1.5
- M90X2
- M90X3
- M90X4
- M90X6
- M95X1.5
- M95X2
- M95X3
- M95X4
- M95X6
- M100X1.5
- M100X2
- M100X3
- M100X4
- M100X6
- M105X2
- M105X6
- M110X2
- M110X3
- M115X2
- M115X4
- M120X2
- M120X3
- M125X2
- M125X4
- M130X2
- M130X3
- M130X6
-
Pitch P
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
- 1
- 1.25
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- Ridge 4.5
- 5
- Ridge 5
- 5.5
- 6
- Ridge 6
- Ridge 7
- Ridge 8
- Ridge 9
- Ridge 10
- 11
- Ridge 11
- Ridge 11 1/2
- Ridge 12
- Ridge 13
- 14
- Ridge 14
- Ridge 16
- Ridge 18
- 19
- Ridge 19
- Ridge 20
- Ridge 24
- Ridge 27
- 28
- Ridge 28
- Ridge 32
- Ridge 36
- Ridge 40
- Ridge 44
- Ridge 48
- Ridge 56
- Ridge 64
- Ridge 72
-
Workpiece
- Male thread
- Female Thread
- Female Thread/Male Screw Set
-
Class
-
Standard
- JIS Standard
- Other
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Plug Gauges / Screw Gauges
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy