(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
MISUMI Square HSS End Mills（work material：Quenched and tempered steel）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price
- Volume Discount
- TiCN
- 4 Flutes
- S (Short)
Standard Price: MYR 122.14- Days to Ship: 2 Day(s) or more -
High-Speed Steel Corner C End Mill, 2-Flute / Regular Model
MISUMI
[Features]
·High-speed steel 2-flute corner chamfer specified end mill with selectable corner chamfer in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 6 Day(s) or more -
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
- Volume Discount
- AS
- 4 Flutes
- S (Short)
Standard Price: MYR 209.22- Days to Ship: 4 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price
- Volume Discount
- TiCN
- 4 Flutes
- S (Short)
Standard Price: MYR 86.22- Days to Ship: 4 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular
MISUMI
[Features]
·High speed steel powder roughing regular flute length 4-flute type that can expect for durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 4 Flutes
- R (Regular)
Standard Price: MYR 86.22- Days to Ship: 2 Day(s) or more -
High-Speed Steel Corner C End Mill, 2-Flute / Short Model
MISUMI
[Features]
·High-speed steel 2-flute corner chamfer specified end mill with selectable corner chamfer in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 6 Day(s) or more -
High-Speed Steel Corner C End Mill, 4-Flute / Regular Model
MISUMI
[Features]
·High-speed steel 4-flute corner chamfer specified end mill with selectable corner chamfer in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 6 Day(s) or more -
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Standard Price: MYR 233.24- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
- Volume Discount
- AS
- 4 Flutes
- L (Long)
Standard Price: MYR 307.38- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
- Volume Discount
- AS
- 3 Flutes
- S (Short)
Standard Price: MYR 254.95- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]
·Demonstrates outstanding durability even during high-speed machining where load on tool is large
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Standard Price: MYR 194.97- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
MISUMI
[Features]
·Demonstrates outstanding durability even during high-speed machining where load on tool is large
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Standard Price: MYR 227.86- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
MISUMI
[Features]
·Demonstrates outstanding durability even during high-speed machining where load on tool is large
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- L (Long)
Standard Price: MYR 299.59- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
MISUMI
[Features]
·Demonstrates outstanding durability even during high-speed machining where load on tool is large
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 3 Flutes
- S (Short)
Standard Price: MYR 237.01- Days to Ship: 4 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price
- Volume Discount
- TiCN
- 4 Flutes
- R (Regular)
Standard Price: MYR 169.27- Days to Ship: 2 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
MISUMI
[Features]
·High speed steel powder roughing long flute length type that can expect durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 4 Flutes
- L (Long)
Standard Price: MYR 233.36- Days to Ship: 4 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
MISUMI
[Features]
·Long shank type of high speed steel powder that can expect durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 3 Flutes
- S (Short)
Standard Price: MYR 206.42- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]
·High-speed steel roughing end mill that achieves both machining performance and price
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Standard Price: MYR 134.01- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut
MISUMI
[Features]
·High-speed steel roughing end mill that achieves both machining performance and price
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Standard Price: MYR 167.65- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut
MISUMI
[Features]
·High-speed steel roughing end mill that achieves both machining performance and price
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- L (Long)
Standard Price: MYR 201.86- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
MISUMI
[Features]
·High-speed steel roughing end mill that achieves both machining performance and price
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 3 Flutes
- S (Short)
Standard Price: MYR 200.76- Days to Ship: 4 Day(s) or more -
Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model
MISUMI
[Features]
·Uncoated short flute length type of high speed steel powder roughing that expect durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Standard Price: MYR 168.26- Days to Ship: 4 Day(s) or more -
Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model
MISUMI
[Features]
·High speed steel powder roughing uncoated regular flute length type that expect to durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Standard Price: MYR 202.61- Days to Ship: 4 Day(s) or more -
Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model
MISUMI
[Features]
·High speed steel powder roughing uncoated long flute length type that can expect durability
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Standard Price: MYR 297.11- Days to Ship: 4 Day(s) or more -
Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model
MISUMI
[Features]
·Uncoated long shank blade length type of high speed steel powder roughing that can expect durability
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 3 Flutes
- S (Short)
Standard Price: MYR 216.15- Days to Ship: 4 Day(s) or more -
TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]
·High-speed steel roughing short flute length type with standard TiAlN coating
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- S (Short)
Standard Price: MYR 123.64- Days to Ship: 2 Day(s) or more -
AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short
MISUMI
[Features]
·High helix type with excellent machinability, so it can be used for a wide range of applications from heavy cutting to finish cutting
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 3 Flutes
- S (Short)
Standard Price: MYR 155.03- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short
MISUMI
[Features]
·High helix type with excellent machinability, so it can be used for a wide range of applications from heavy cutting to finish cutting
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Standard Price: MYR 159.52- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]
·Cutting force is reduced because nicks on peripheral edge divide cutting chips
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 3 Flutes
- S (Short)
Standard Price: MYR 199.50- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]
·Cutting force is reduced because nicks on peripheral edge divide cutting chips
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Standard Price: MYR 193.66- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
[Features]
·High speed steel powder square short blade length 2-flute type that can expect for durability
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 2 Flutes
- S (Short)
Standard Price: MYR 124.38- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular
MISUMI
[Features]
·High speed steel powder square regular blade length 2-flute type that can expect for durability
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 2 Flutes
- R (Regular)
Standard Price: MYR 125.95- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long
MISUMI
[Features]
·High speed steel powder square long blade length type that can expect for durability
·Suitable for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 2 Flutes
- L (Long)
Standard Price: MYR 138.71- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short
MISUMI
AS coating with excellent wear resistance achieves the high-precision finish even in prolonged processing
- Volume Discount
- AS
- 4 Flutes
- S (Short)
Standard Price: MYR 131.35- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular
MISUMI
[Features]
·Achieving high durability in a wide range of materials, from raw materials to heat-treated steel
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Standard Price: MYR 134.38- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long
MISUMI
[Features]
·Achieving high durability in a wide range of materials, from raw materials to heat-treated steel
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- L (Long)
Standard Price: MYR 146.79- Days to Ship: 4 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
[Features]
·High speed steel powder roughing short flute length type that can expect for durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 2 Flutes
- S (Short)
Standard Price: MYR 88.33- Days to Ship: 4 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular
MISUMI
[Features]
·High speed steel powder roughing regular flute length type that can expect for durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 2 Flutes
- R (Regular)
Standard Price: MYR 88.33- Days to Ship: 4 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long
MISUMI
[Features]
·High speed steel powder roughing long flute length type that can expect durability
·Suitable for deep cavity milling
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 2 Flutes
- L (Long)
Standard Price: MYR 82.85- Days to Ship: 4 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular
MISUMI
[Features]
·High speed steel powder roughing long flute length 4-flute type that can expect for durability
·Suitable for deep cavity milling
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 4 Flutes
- L (Long)
Standard Price: MYR 86.22- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
[Features]
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 2 Flutes
- S (Short)
Standard Price: MYR 93.93- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Square End Mill, 2-Flute / Regular
MISUMI
[Features]
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 2 Flutes
- R (Regular)
Standard Price: MYR 96.44- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Square End Mill, 2-Flute / Long
MISUMI
[Features]
·Suitable for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 2 Flutes
- L (Long)
Standard Price: MYR 103.79- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Square End Mill, 4-Flute / Short
MISUMI
[Features]
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Standard Price: MYR 99.76- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular
MISUMI
[Features]
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Standard Price: MYR 108.34- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Machining Application |
| Coating |
| Blade shape type |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Tool Material Type |
| Underneck length (ℓ1)(mm) |
| shank |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut | TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short | TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut | Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model | Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model | Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model | Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model | TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut | AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short | AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short | AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular | AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long | TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short | TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular | TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long | TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular | AS Coated High-Speed Steel Square End Mill, 2-Flute / Regular | AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular | ||||||||
| Days to Ship | 2 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Blade diameter (D)(φ) | 6 ～ 32 | 3 ～ 25 | 6 ～ 30 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 6 ～ 30 | 10 ～ 30 | 6 ～ 30 | 5 ～ 32 | 6 ～ 30 | 10 ～ 30 | 6 ～ 30 | 6 ～ 30 | 10 ～ 30 | 6 ～ 30 | 5 ～ 50 | 6 ～ 50 | 10 ～ 50 | 6 ～ 30 | 5 ～ 30 | 6 ～ 30 | 10 ～ 25 | 6 ～ 30 | 5 ～ 30 | 6 ～ 25 | 6 ～ 25 | 6 ～ 20 | 6 ～ 20 | 1 ～ 40 | 1 ～ 25 | 3 ～ 20 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 1 ～ 40 | 1 ～ 25 | 3 ～ 25 | 3 ～ 25 | 1 ～ 50 | 1 ～ 25 | 3 ～ 40 | 3 ～ 38 | 3 ～ 30 |
| Blade length (ℓ)(mm) | 13 ～ 53 | 10 ～ 60 | 13 ～ 45 | 8 ～ 45 | 12 ～ 68 | 8 ～ 50 | 12 ～ 68 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 | 13 ～ 53 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 | 13 ～ 75 | 19 ～ 112 | 45 ～ 150 | 11 ～ 45 | 13 ～ 45 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 | 13 ～ 45 | 15 ～ 50 | 15 ～ 50 | 15 ～ 45 | 15 ～ 45 | 2.5 ～ 65 | 3.5 ～ 60 | 15 ～ 75 | 8 ～ 45 | 12 ～ 68 | 15 ～ 90 | 2.5 ～ 65 | 3.5 ～ 60 | 15 ～ 90 | 15 ～ 90 | 2.5 ～ 75 | 3.5 ～ 60 | 15 ～ 110 | 8 ～ 65 | 12 ～ 68 |
| Shank diameter (d)(mm) | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 10 ～ 42 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 25 | 8 ～ 25 | 8 ～ 25 | 8 ～ 20 | 8 ～ 20 | 6 ～ 32 | 6 ～ 25 | 6 ～ 20 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 |
| Number of flutes(sheet) | 3 ～ 6 | 2 | 3 ～ 5 | 4 | 4 | 2 | 4 | 3 ～ 5 | 4 ～ 5 | 3 ～ 4 | 3 ～ 6 | 3 ～ 5 | 4 ～ 5 | 3 ～ 4 | 3 ～ 5 | 4 ～ 5 | 3 ～ 4 | 3 ～ 6 | 3 ～ 6 | 4 ～ 6 | 3 ～ 4 | 3 ～ 5 | 3 ～ 5 | 4 | 3 ～ 4 | 3 ～ 6 | 3 | 4 | 3 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 4 | 4 |
| Overall Length (L)(mm) | 57 ～ 133 | 50 ～ 130 | 57 ～ 121 | 52 ～ 121 | 55 ～ 144 | 50 ～ 120 | 55 ～ 144 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 | 57 ～ 133 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 | 57 ～ 177 | 63 ～ 214 | 95 ～ 252 | 80 ～ 160 | 57 ～ 121 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 | 57 ～ 121 | 65 ～ 140 | 65 ～ 140 | 65 ～ 125 | 65 ～ 125 | 45 ～ 150 | 45 ～ 130 | 60 ～ 140 | 52 ～ 121 | 55 ～ 144 | 60 ～ 160 | 45 ～ 150 | 45 ～ 130 | 60 ～ 160 | 60 ～ 160 | 45 ～ 165 | 45 ～ 130 | 60 ～ 195 | 52 ～ 150 | 55 ～ 144 |
| work material | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking |
| Coating | TiCN | TiCN / Non-Coated | For High Hardness (Silicon Group) | TiCN | TiCN | TiCN / Non-Coated | TiCN / Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiCN | TiCN | TiCN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiCN | TiCN | TiCN | TiCN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
| Blade shape type | Roughing | Square | Roughing | Square | Square | Square | Square | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Base Blade Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Tool Material Type | Powder high-speed steel | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| shank | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Blade length (ℓ)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Machining Application
-
Coating
-
Blade shape type
- Square
- Roughing
- For Keyway
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Tool Material Type
-
Underneck length (ℓ1)(mm)
-
shank
Narrow search by specifying Manufacturer
-
- MISUMI (59)
- SANKO MFG (49)
- OSG (32)
- NACHI(FUJIKOSHI) (28)
- ASAHI TOOLS (4)
- EIKOSHA (1)
- FUKUDA (0)
- ESCO (0)
- DAIICHITOOL (0)
- TAIYO-TOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Square HSS End Mills
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy