(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

MISUMI Pipes, Metal Tubes

Days to Ship
  • All
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 14 Day(s) or Less
  1. 1
  • Stainless Steel Hollow Tubes - Wall Thickness Selectable

    Stainless Steel Hollow Tubes - Wall Thickness Selectable

    MISUMI

    Wall thickness can be selected in 0.5mm increments. The variety of inner and outer diameters is attractive! [Material] SUS304

    CAD :
    2D / 3D
  • Thin-Walled Ground Stainless Steel Hollow Tubes

    Thin-Walled Ground Stainless Steel Hollow Tubes

    MISUMI

    Wall thickness can be selected from ``0.3mm'', ``0.5mm'', and ``1.0mm''. Annealed materials are also ideal for “bending”! [Material] SUS304, SUS304 (annealed material) When bending the pipe, please use a pipe bending tool.

    CAD :
    2D / 3D
  • Thin-Walled Ground Stainless Steel Hollow Tubes - Precision I.D. / O.D.

    Thin-Walled Ground Stainless Steel Hollow Tubes - Precision I.D. / O.D.

    MISUMI

    Outer diameters from 0.5 to 5mm can be specified in 0.5mm increments! The "outer diameter polished finish" is also attractive! [Material] SUS304

    CAD :
    2D / 3D
  • Thick-Walled Ground Stainless Steel Hollow Tubes - Straight Type

    Thick-Walled Ground Stainless Steel Hollow Tubes - Straight Type

    MISUMI

    Finished with an outer diameter tolerance of "h8". Since it has been polished, it is possible to reduce the number of steps! [Material] SUS304. This product is cut from polish finishing, it may have some scratches on the product.

    CAD :
    2D / 3D
  • Welded Thin-Walled Hollow Tubes / Drawn Hollow Tubes

    Welded Thin-Walled Hollow Tubes / Drawn Hollow Tubes

    MISUMI

    ERW pipe and drawn material can be selected. The wide variety of materials is also attractive! [Material] SUS304, STKM13A, C2700 (brass), A6063

    CAD :
    2D / 3D
  • [Clean & Pack]Thin-Walled Ground Stainless Steel Hollow Tubes

    [Clean & Pack]Thin-Walled Ground Stainless Steel Hollow Tubes

    MISUMI

    Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
    This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
    ■Part number for clean & pack products
    · Degreasing (anti-rust single packing)     : part number SL-□□
    · Precision cleaning (degassing double packing)     : part number SH-□□
    · Electrolytic polishing + precision cleaning (degassing double packing) : part number SHD-□□
    Product part number Cleaning method Packaging type Effects Compared to Uncleaned Product Environment (Standard) Process
    SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process
    Post battery assembly process
    SH-□□ Precision cleaning Degassing double packing Oil removal
    Dust removal
    Clean environment (Class 10 to 1,000) Battery assembly process
    LCD-related post assembly process
    In-vehicle camera assembly process
    SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
    Dust removal
    Outgas reduction
    Vacuum environment
    Clean environment (Class 10 to 1,000)
    Pre-semiconductor process
    Liquid crystal deposition process
    Pre-OLED process
    ■Notes
    Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
    Please be careful about the application location and storage environment.

    The wall thickness can be selected from 0.3 mm, 0.5 mm and 1.0 mm. Annealed materials are also ideal for bending. Materials SUS304, SUS304 (Annealed Material)

    CAD :
    2D / 3D
  • Steel Hollow Tubes - I.D. Selectable

    Steel Hollow Tubes - I.D. Selectable

    MISUMI

    There are a wide variety of inner and outer diameters to choose from. It is also attractive that you can choose the surface treatment! [Material] STKM17C equivalent

    CAD :
    2D / 3D
  • [Clean & Pack]Thick-Walled Ground Stainless Steel Hollow Tubes

    [Clean & Pack]Thick-Walled Ground Stainless Steel Hollow Tubes

    MISUMI

    Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
    This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
    ■Part number for clean & pack products
    · Degreasing (anti-rust single packing)     : part number SL-□□
    · Precision cleaning (degassing double packing)     : part number SH-□□
    · Electrolytic polishing + precision cleaning (degassing double packing) : part number SHD-□□
    Product part number Cleaning method Packaging type Effects Compared to Uncleaned Product Environment (Standard) Process
    SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process
    Post battery assembly process
    SH-□□ Precision cleaning Degassing double packing Oil removal
    Dust removal
    Clean environment (Class 10 to 1,000) Battery assembly process
    LCD-related post assembly process
    In-vehicle camera assembly process
    SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
    Dust removal
    Outgas reduction
    Vacuum environment
    Clean environment (Class 10 to 1,000)
    Pre-semiconductor process
    Liquid crystal deposition process
    Pre-OLED process
    ■Notes
    Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
    Please be careful about the application location and storage environment.

    Finished with O.D. tolerance of h8. Since it has been polished, it is possible to reduce the number of manufacturing steps. [Material] SUS304

    CAD :
    2D / 3D
  • Thick-Walled Ground Stainless Steel Hollow Tubes - One End Tapped or Both Ends Tapped

    Thick-Walled Ground Stainless Steel Hollow Tubes - One End Tapped or Both Ends Tapped

    MISUMI

    Outer diameter tolerance "h8" and "shaft end female thread" machining allows for process reduction! [Material] SUS304

    CAD :
    2D / 3D
  • Thick-Walled Ground Stainless Steel Hollow Tubes - One End Threaded or Both Ends Threaded

    Thick-Walled Ground Stainless Steel Hollow Tubes - One End Threaded or Both Ends Threaded

    MISUMI

    Outer diameter tolerance "h8" and "shaft end male thread" processing allows for process reduction! [Material] SUS304

    CAD :
    2D / 3D
  • [Clean & Pack]Stainless Steel Hollow Tubes, Wall Thickness Selectable

    [Clean & Pack]Stainless Steel Hollow Tubes, Wall Thickness Selectable

    MISUMI

    Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
    This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
    ■Part number for clean & pack products
    · Degreasing (anti-rust single packing)     : part number SL-□□
    · Precision cleaning (degassing double packing)     : part number SH-□□
    · Electrolytic polishing + precision cleaning (degassing double packing) : part number SHD-□□
    Product part number Cleaning method Packaging type Effects Compared to Uncleaned Product Environment (Standard) Process
    SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process
    Post battery assembly process
    SH-□□ Precision cleaning Degassing double packing Oil removal
    Dust removal
    Clean environment (Class 10 to 1,000) Battery assembly process
    LCD-related post assembly process
    In-vehicle camera assembly process
    SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
    Dust removal
    Outgas reduction
    Vacuum environment
    Clean environment (Class 10 to 1,000)
    Pre-semiconductor process
    Liquid crystal deposition process
    Pre-OLED process
    ■Notes
    Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
    Please be careful about the application location and storage environment.

    Wall thickness can be selected in 0.5 mm increments. Appealing wide selection of inner and outer diameters. [Material] SUS304

    CAD :
    2D / 3D
  • [Clean & Pack]Thick-Walled Ground Stainless Steel Hollow Tubes - One End and Both Ends Tapped

    [Clean & Pack]Thick-Walled Ground Stainless Steel Hollow Tubes - One End and Both Ends Tapped

    MISUMI

    Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
    This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
    ■Part number for clean & pack products
    · Degreasing (anti-rust single packing)     : part number SL-□□
    · Precision cleaning (degassing double packing)     : part number SH-□□
    · Electrolytic polishing + precision cleaning (degassing double packing) : part number SHD-□□
    Product part number Cleaning method Packaging type Effects Compared to Uncleaned Product Environment (Standard) Process
    SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process
    Post battery assembly process
    SH-□□ Precision cleaning Degassing double packing Oil removal
    Dust removal
    Clean environment (Class 10 to 1,000) Battery assembly process
    LCD-related post assembly process
    In-vehicle camera assembly process
    SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
    Dust removal
    Outgas reduction
    Vacuum environment
    Clean environment (Class 10 to 1,000)
    Pre-semiconductor process
    Liquid crystal deposition process
    Pre-OLED process
    ■Notes
    Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
    Please be careful about the application location and storage environment.

    O.D. Tolerance h8 and shaft end tapped processing allow process reduction. [Material] SUS304

    CAD :
    2D / 3D
  • [Clean & Pack]Thick-Walled Ground Stainless Steel Hollow Tubes - Precision I.D./O.D.

    [Clean & Pack]Thick-Walled Ground Stainless Steel Hollow Tubes - Precision I.D./O.D.

    MISUMI

    Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
    This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
    ■Part number for clean & pack products
    · Degreasing (anti-rust single packing)     : part number SL-□□
    · Precision cleaning (degassing double packing)     : part number SH-□□
    · Electrolytic polishing + precision cleaning (degassing double packing) : part number SHD-□□
    Product part number Cleaning method Packaging type Effects Compared to Uncleaned Product Environment (Standard) Process
    SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process
    Post battery assembly process
    SH-□□ Precision cleaning Degassing double packing Oil removal
    Dust removal
    Clean environment (Class 10 to 1,000) Battery assembly process
    LCD-related post assembly process
    In-vehicle camera assembly process
    SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
    Dust removal
    Outgas reduction
    Vacuum environment
    Clean environment (Class 10 to 1,000)
    Pre-semiconductor process
    Liquid crystal deposition process
    Pre-OLED process
    ■Notes
    Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
    Please be careful about the application location and storage environment.

    Outer diameter is configurable from 0.5 to 5 mm in 0.5 mm increments. The "Outer diameter polished finish" is also appealing. [Material] SUS304

    CAD :
    2D / 3D
  • [Clean & Pack]Welded Thin-Walled Hollow Tubes

    [Clean & Pack]Welded Thin-Walled Hollow Tubes

    MISUMI

    Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
    This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
    ■Part number for clean & pack products
    · Degreasing (anti-rust single packing)     : part number SL-□□
    · Precision cleaning (degassing double packing)     : part number SH-□□
    · Electrolytic polishing + precision cleaning (degassing double packing) : part number SHD-□□
    Product part number Cleaning method Packaging type Effects Compared to Uncleaned Product Environment (Standard) Process
    SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process
    Post battery assembly process
    SH-□□ Precision cleaning Degassing double packing Oil removal
    Dust removal
    Clean environment (Class 10 to 1,000) Battery assembly process
    LCD-related post assembly process
    In-vehicle camera assembly process
    SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
    Dust removal
    Outgas reduction
    Vacuum environment
    Clean environment (Class 10 to 1,000)
    Pre-semiconductor process
    Liquid crystal deposition process
    Pre-OLED process
    ■Notes
    Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
    Please be careful about the application location and storage environment.

    CAD :
    2D / 3D
  • [Clean & Pack]Thick-Walled Ground Stainless Steel Hollow Tubes - One End and Both Ends Threaded

    [Clean & Pack]Thick-Walled Ground Stainless Steel Hollow Tubes - One End and Both Ends Threaded

    MISUMI

    Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
    This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
    ■Part number for clean & pack products
    · Degreasing (anti-rust single packing)     : part number SL-□□
    · Precision cleaning (degassing double packing)     : part number SH-□□
    · Electrolytic polishing + precision cleaning (degassing double packing) : part number SHD-□□
    Product part number Cleaning method Packaging type Effects Compared to Uncleaned Product Environment (Standard) Process
    SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process
    Post battery assembly process
    SH-□□ Precision cleaning Degassing double packing Oil removal
    Dust removal
    Clean environment (Class 10 to 1,000) Battery assembly process
    LCD-related post assembly process
    In-vehicle camera assembly process
    SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
    Dust removal
    Outgas reduction
    Vacuum environment
    Clean environment (Class 10 to 1,000)
    Pre-semiconductor process
    Liquid crystal deposition process
    Pre-OLED process
    ■Notes
    Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
    Please be careful about the application location and storage environment.

    O.D. Tolerance h8 and shaft end threaded processing allow process reduction. [Material] SUS304

    CAD :
    2D / 3D

Loading...

  1. 1

Related Categories to Pipes, Metal Tubes