(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Kindly be informed that it will be peak period in conjunction with the Chinese New Year festive season. Delivery pickup upon 25 January 2025 estimated would arrive after CNY holidays. Please expect slight delay for orders shipped during this peak season and we thank you for your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
SMC Rotary Actuators
| Days to Ship |
|
|---|
-
Rotary Table, Rack And Pinion Type, MSQ Series (Size 10 And Up)
SMC
SMC Rotary Actuator
[Features]
· Easy mounting of workpiece
· Large rolling element bearings
· Angle adjustment range: 0 to 190°
· Easy mounting of body
· Movement in direction of table's radial thrust: 0.01 mm or less
· End face and side piping possibleDays to Ship: 21 Day(s) or more -
Rotary Actuator, Vane Type, CRB2 Series
SMC
Can be combined freely with many kinds of unit.
[Features]
· Piping port parts are located on the flat section.
· Many variations of shaft-end shape (6 types).
· Works with the compact auto switch D-M9□ type.Days to Ship: 21 Day(s) or more -
Rotary Table, Rack And Pinion Type, CRA1 Series
SMC
[Features]
· The model D-M9□ compact auto switch can be equipped.
· Overall width reduced by up to 14 mm.
· Mountable on 2 surfaces.
· Auto switch can be mounted from the front.
· Weight reduced by up to 14%.
· Mounting compatibility with existing models.
· The cushion seal is replaceable.
· Easy adjustment of the cushion valve.
· The ports, cushion valve and auto switch are all located on the same surface for improved usability.
· Many variations of shaft type.
· Can be mounted in a way that is suitable for the operating conditions/environment.Days to Ship: 21 Day(s) or more -
Rotary Actuator, Vane Type, CRB1 Series
SMC
[Features]
· Works with the model D-M9□ compact auto switch.
· Highly reliable.
& nbspSupports thrust and radial loads and uses bearings.
· The body can be mounted directly.
· 2 types of port location; side ported or axial ported.Days to Ship: 21 Day(s) or more -
LER Series Electric Rotary Table, Continuous Rotation Specification
SMC
Shockless / high-speed rotary actuator.
[Features]
· Positioning repeatability: ±0.03° (high-precision type).
· Rotation angle: 360°.
· Possible to set speed, acceleration/deceleration and positioning up to 64 points.
· Energy-saving product: Automatic 40% power reduction after the table has stopped.
· Step motor (servo 24 V DC).
· RoHS compliant.Days to Ship: 21 Day(s) or more -
Rotary Actuator With Angle Adjuster, Vane Type, CRB2□WU Series
SMC
Can be combined freely with many kinds of unit.
[Features]
With angle adjuster.
· Piping port parts are located on the flat section.
· Many variations of shaft-end shape (6 types).
· Works with the compact auto switch D-M9□ type.Days to Ship: 21 Day(s) or more -
3-Position Rotary Table MSZ Series
SMC
SMC Rotary Actuator
[Features]
· 3 stop positions possible
Stop position adjustment range:
From center: ±10°
Rotation range: 0 to 95°
· Handles applications such as sorting workpieces to either left or right
· Can be operated by a single valveDays to Ship: 21 Day(s) or more -
SMC
A linear-motion / rotary unit with slim cylinder and rotary actuator integrated into one compact form.
[Features]
· The timing of the linear and rotational motions can be set freely.
· Available with air cushion.
· With auto switch (can be mounted on both sides).
· Smooth rotary motion.
· The angle can be adjusted.Days to Ship: 21 Day(s) or more -
LER Series Electric Rotary Table
SMC
Low-profile rotary actuator.
[Features]
· Positioning repeatability: ±0.03° (high-precision type).
· Rotation angle: 320° (310°), 180°, 90°. *The value in parentheses is for the LER10.
· Shockless / high-speed actuation.
· Possible to set speed, acceleration/deceleration and positioning up to 64 points.
· Energy-saving product: Automatic 40% power reduction after the table has stopped.
· Step motor (servo 24 V DC).Days to Ship: 21 Day(s) or more -
Compact Rotary Actuator, Rack And Pinion Type, CRQ2 Series
SMC
[Features]
· Uses internal cushioning.
· The main body can also serve as a flange.
· With angle adjustment mechanism (each rotation end ±5°).
· 360° rotating angle type.
· Piping can be installed from one end.
· 2 auto switches can be mounted on the same side (mountable on both sides).
· A double piston design free from backlash.
· Shaft type: Supports both single and double shafts.
· Centering is easy when mounting the body.Days to Ship: 21 Day(s) or more -
Rotary Table Rack Pinion Type MSQ Series With External Absorber. Size: 10 to 30·50
SMC
By shortening the effective stroke of the shock absorber, absorption time is shortened, making it possible to improve the takt time.
[Features]
· 4 to 10 times more allowable kinetic energy.
& Nbsp2 types of shock absorber are available, for low energy and high energy.
· Reduced overall length.
& NbspThere are no protrusions from the adjusting bolts or internal shock absorbers, reducing the longitudinal mounting space.
· The table height is the same for both types (types with adjustment bolts and types with internal shock absorber).Days to Ship: 21 Day(s) or more -
Free Mount Type Rotary Actuator, Vane Type, CRBU2 Series
SMC
Can be combined freely with many kinds of unit.
[Features]
· Boasts a 12% weight reduction.
· Multiple mounting variations.
· Works with the compact auto switch D-M9□ type.
· Possible to move the plate mounting position as desired.
· Mounting pitch compatible with existing models.
· Rotation angles of 90°, 180° and 270°; all of the series can rotate up to 270°.Days to Ship: 21 Day(s) or more -
Low Speed Rotary Table, Rack And Pinion Type, MSQX Series
SMC
[Features]
· Possible to transfer workpieces at low speeds.
· Achieves stable motion at 5s/90°.
& nbspSmooth motion without stick-slip phenomenon.
· Rotation time adjustment range: 1 to 5 (s/90°).Days to Ship: 21 Day(s) or more -
Rotary Table, Rack And Pinion Type, MSQ Series (Size 1, 2, 3, 7)
SMC
Thin-profile type rotary table unit with low table height.
[Features]
· Easy mounting of workpieces.
· Large rolling element bearings.
· Angle adjustment range: 0 to 190°.
· Easy mounting of main body.
· Uses high precision bearings.
· Movement in direction of table's radial thrust: 0.01 mm or less.
· Piping from end or side.
· Features a space-saving design with a reduced body size and less space required for piping and wiring.Days to Ship: 21 Day(s) or more -
Rotary Actuator, Vane Type, Clean and Low Dust Generation 10-/21-CRB1 Series
SMC
[10-Series Clean Series]
・ This product can be used in a clean environment
・ Prevents dust generation in the cleanroom
[21-Series, Copper-Free/ Fluorine-Free/ Silicone Type-Free + Low Dust Generation]
・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials
・ The structure is the same as the Clean Series (Grease and packaging are different from the Clean Series)Days to Ship: 21 Day(s) or more -
Basic Rotary Table, Vane Type, MSUB Series
SMC
A rotary actuator with a lightweight and compact table, suitable for robot hands.
[Features]
· Free mount type.
& nbspCan be mounted in 3 directions; axial, lateral, vertical.
· Single vane and double vane types now standard.
· The double vane type has the same dimensions as the single vane type.Days to Ship: 21 Day(s) or more -
CRA1□□U Series Angle Adjustable Rotary Actuator, Rack & Pinion Type
SMC
A rotary actuator that can be mounted according to the operating conditions.
[Features]
· Compact auto switches are mountable (D-M9□).
· The cushion seal is replaceable.
· Easy adjustment of the cushion valve.
· The ports, cushion valve and auto switch are all located on the same surface for improved usability.
· Many variations of shaft type.
· Angle can be adjusted to the desired level in a range of up to 90°.
· CRA1: basic type / CDRA1: with auto switch.
· Size: 50, 63, 80, 100.Days to Ship: 21 Day(s) or more -
Mini Rotary Actuator CRJ Series
SMC
SMC rotary actuator
[Features]
· Compact and lightweight
· Flexible mounting
Can be mounted from the top, bottom or sides
· Supports both front and side porting
· Improved allowable load
Uses a large roller bearing and large diameter output shaft
to ensure improved compactness and rigidity
· Even with a single-rack design, its special construction helps minimize backlash from the output shaftDays to Ship: 21 Day(s) or more -
MSUA Series Rotary Table: High-Precision Type, Vane Type
SMC
A rotary actuator with a lightweight and compact table, suitable for robot hands.
[Features]
· High precision and high rigidity.
· Improved table deflection accuracy: 0.03 mm or less.
· Easy alignment when mounting the load.
· Easy alignment when mounting the body.
· Angle adjustable.
· Disengageable.
· Auto switch capable.
· Vane type.Days to Ship: 21 Day(s) or more -
Rotary Actuator With Solenoid Valve, Vane Type, CVRB1 Series
SMC
Rotary actuator with solenoid valve.
[Features]
·2 types of port positions, body side and axial direction
·Mounting method: Direct mounting / foot type mounting
·Auto switch: None (no symbol), with auto switch (D)
·Size: 50, 63, 80, 100
·Vane type: Single vane, double vane
·Rotating angle: 90°, 100°, 180°, 190°, 270°, 280°, 45°, 135°Days to Ship: 21 Day(s) or more -
CRQ2X Series Rack & Pinion Type Compact Low-Speed 90°/180° Rotary Actuator
SMC
Compact, low-speed rotary actuator capable of low-speed transfer of workpieces.
[Features]
· Achieves stable motion at 5 s/90°.
· Smooth motion without sticking or slipping.
· Rotation time adjustment range: 1 to 5 s/90°.
· Standard type: CRQ2 / With auto switch: CDRQ2.
· Size: 10, 15, 20, 30, 40.
· Port types: G1/8, NPT1/8, NPTF1/8, Rc1/8, M5.Days to Ship: 21 Day(s) or more -
Rotary Actuator, Rack and Pinion Type, Clean Series 11-CRA1-Z Series
SMC
[11-Series Clean Series]
・ This product can be used in a clean environment
・ Prevents dust generation in the cleanroomDays to Ship: 21 Day(s) or more -
Rotary Table, Rack and Pinion Type, Clean and Low Dust Generation 11-/20-/22-MSQ Series
SMC
[11-Series Clean Series]
・ This product can be used in a clean environment
・ Prevents dust generation in the cleanroom
[20-series Copper-Free/Fluorine-Free Specifications]
・ It can be used in environments where copper and fluorine materials should be avoided
・ External dimensions are the same as standard products
[22-Series, Copper-Free/ Fluorine-Free/ Silicone Type-Free + Low Dust Generation]
・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials
・ The structure is the same as the Clean Series (Grease and packaging are different from the Clean Series)Days to Ship: 21 Day(s) or more -
Rotary Table, Rack and Pinion Type, Rechargeable Battery Compatible 25A-MSQ Series
SMC
[Rechargeable battery compatible series]
Copper (Cu) and zinc (Zn) materials are not used to reduce product defects in the rechargeable battery manufacturing process.
Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
Electrolytic nickel plating and zinc plating with copper base are not used. (Electrolytic nickel plating is used. )
This product uses low dew point compatible grease, can be used at -70°C, improved performance in low dew point environment.Days to Ship: 21 Day(s) or more -
Free Mount Type Rotary Actuator With Angle Adjuster, Vane Type, CRBU2WU Series
SMC
Can be combined freely with many kinds of unit.
[Features]
With angle adjuster.
· · Boasts a 12% weight reduction.
· Multiple mounting variations.
· Works with the compact auto switch D-M9□ type.
· Possible to move the plate mounting position as desired.
· Mounting pitch compatible with existing models.
· Rotation angles of 90°, 180° and 270°; all of the series can rotate up to 270°.Days to Ship: 21 Day(s) or more -
CVRA1 Series Rotary Actuator With Solenoid Valve, Rack & Pinion Type
SMC
Solenoid valve and rotation speed adjustment function are integrated.
[Features]
· Compact auto switches are mountable (D-M9□).
· Replaceable cushion seal, easy adjustment of cushion valve.
· The ports, cushion valve and auto switch are all located on the same surface for improved usability.
· Numerous shaft shape variations allow mounting to suit the operating conditions.
· Part number is set for the angle adjustable type.
· CVRA1: basic type / CDVRA1: with auto switch.
· Size: 50, 63, 80, 100.Days to Ship: 21 Day(s) or more -
Rotary Table, Vane Type Rechargeable Battery Compatible 25A-MSUB Series
SMC
[Rechargeable battery compatible series]
Copper (Cu) and zinc (Zn) materials are not used to reduce product defects in the rechargeable battery manufacturing process.
Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
Electrolytic nickel plating and zinc plating with copper base are not used. (Electrolytic nickel plating is used. )
This product uses low dew point compatible grease, can be used at -70°C, improved performance in low dew point environment.Days to Ship: Quote -
ATEX Directive, Rotary Actuator, Vane Type 55-CRB1 Series, ATEX Category 2
SMC
[What is the ATEX directive?]
Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
■CE mark and ATEX
The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
■Purpose of ATEX Directive
The main purposes of ATEX are:
・ Prevention of static charge
・ Ignition prevention of sparks caused by friction, impact, and wear
・ Ignition prevention due to temperature rise due to the same as above
・ The responsibility lies with the manufacturer
・ Certification by zone/category
■Zone / category division
In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
・ Zone 0: Category 1
Probability of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
・ Zone 1: Category 2
Probability of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
・ Zone 2: Category 3
Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/yearDays to Ship: 21 Day(s) or more -
ATEX Directive, Rotary Actuator, Vane Type 56-CRB1 Series, ATEX Category 3
SMC
[What is the ATEX directive?]
Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
■CE mark and ATEX
The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
■Purpose of ATEX Directive
The main purposes of ATEX are:
・ Prevention of static charge
・ Ignition prevention of sparks caused by friction, impact, and wear
・ Ignition prevention due to temperature rise due to the same as above
・ The responsibility lies with the manufacturer
・ Certification by zone/category
■Zone / category division
In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
・ Zone 0: Category 1
Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
・ Zone 1: Category 2
Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
・ Zone 2: Category 3
Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/yearDays to Ship: 21 Day(s) or more -
ATEX Directive, Rotary Actuator, Vane Type 55-CRB2 Series, ATEX Category 2
SMC
[What is the ATEX directive?]
Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
■CE mark and ATEX
The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
■Purpose of ATEX Directive
The main purposes of ATEX are:
・ Prevention of static charge
・ Ignition prevention of sparks caused by friction, impact, and wear
・ Ignition prevention due to temperature rise due to the same as above
・ The responsibility lies with the manufacturer
・ Certification by zone/category
■Zone / category division
In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
・ Zone 0: Category 1
Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
・ Zone 1: Category 2
Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
・ Zone 2: Category 3
Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/yearDays to Ship: Quote -
ATEX Directive, Rotary Actuator, Vane Type 56-CRB2 Series, ATEX Category 3
SMC
[What is the ATEX directive?]
Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
■CE mark and ATEX
The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
■Purpose of ATEX Directive
The main purposes of ATEX are:
・ Prevention of static charge
・ Ignition prevention of sparks caused by friction, impact, and wear
・ Ignition prevention due to temperature rise due to the same as above
・ The responsibility lies with the manufacturer
・ Certification by zone/category
■Zone / category division
In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
・ Zone 0: Category 1
Probability of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
・ Zone 1: Category 2
Probability of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
・ Zone 2: Category 3
Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/yearDays to Ship: Quote -
ATEX Directive, Rotary Actuator, Free Mount Type, 55-CRBU2 Series
SMC
[What is the ATEX directive?]
Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
■CE mark and ATEX
The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
■Purpose of ATEX Directive
The main purposes of ATEX are:
・ Prevention of static charge
・ Ignition prevention of sparks caused by friction, impact, and wear
・ Ignition prevention due to temperature rise due to the same as above
・ The responsibility lies with the manufacturer
・ Certification by zone/category
■Zone / category division
In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
・ Zone 0: Category 1
Probability of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
・ Zone 1: Category 2
Probability of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
・ Zone 2: Category 3
Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/yearDays to Ship: Quote -
ATEX Directive, Rotary Actuator, Free Mount Type, 56-CRBU2 Series
SMC
[What is the ATEX directive?]
Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
■CE mark and ATEX
The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
■Purpose of ATEX Directive
The main purposes of ATEX are:
・ Prevention of static charge
・ Ignition prevention of sparks caused by friction, impact, and wear
・ Ignition prevention due to temperature rise due to the same as above
・ The responsibility lies with the manufacturer
・ Certification by zone/category
■Zone / category division
In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
・ Zone 0: Category 1
Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
・ Zone 1: Category 2
Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
・ Zone 2: Category 3
Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/yearDays to Ship: Quote -
ATEX Directive, Low Profile Rotary Actuator, Rack and Pinion Type, 55-CRQ2 Series
SMC
[What is the ATEX directive?]
Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
■CE mark and ATEX
The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
■Purpose of ATEX Directive
The main purposes of ATEX are:
・ Prevention of static charge
・ Ignition prevention of sparks caused by friction, impact, and wear
・ Ignition prevention due to temperature rise due to the same as above
・ The responsibility lies with the manufacturer
・ Certification by zone/category
■Zone / category division
In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
・ Zone 0: Category 1
Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
・ Zone 1: Category 2
Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
・ Zone 2: Category 3
Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/yearDays to Ship: Quote
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Main Body Shape |
| Oscillation Angle A |
| Torque(N･m) |
| Operation Method |
| Environment, Applications |
| Rigidity, Accuracy |
| Tube Nominal Dia. |
| Valves |
| Allowable Kinetic Energy(J) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC |
| Product Series | Rotary Table, Rack And Pinion Type, MSQ Series (Size 10 And Up) | LER Series Electric Rotary Table, Continuous Rotation Specification | Rotary Actuator With Angle Adjuster, Vane Type, CRB2□WU Series | Rotary Table Rack Pinion Type MSQ Series With External Absorber. Size: 10 to 30·50 | Rotary Table, Rack And Pinion Type, MSQ Series (Size 1, 2, 3, 7) | Rotary Actuator, Vane Type, Clean and Low Dust Generation 10-/21-CRB1 Series | CRA1□□U Series Angle Adjustable Rotary Actuator, Rack & Pinion Type | Rotary Actuator With Solenoid Valve, Vane Type, CVRB1 Series | CRQ2X Series Rack & Pinion Type Compact Low-Speed 90°/180° Rotary Actuator | Rotary Actuator, Rack and Pinion Type, Clean Series 11-CRA1-Z Series | Rotary Table, Rack and Pinion Type, Clean and Low Dust Generation 11-/20-/22-MSQ Series | Rotary Table, Rack and Pinion Type, Rechargeable Battery Compatible 25A-MSQ Series | Free Mount Type Rotary Actuator With Angle Adjuster, Vane Type, CRBU2WU Series | CVRA1 Series Rotary Actuator With Solenoid Valve, Rack & Pinion Type | Rotary Table, Vane Type Rechargeable Battery Compatible 25A-MSUB Series | ATEX Directive, Rotary Actuator, Vane Type 55-CRB1 Series, ATEX Category 2 | ATEX Directive, Rotary Actuator, Vane Type 56-CRB1 Series, ATEX Category 3 | ATEX Directive, Rotary Actuator, Vane Type 55-CRB2 Series, ATEX Category 2 | ATEX Directive, Rotary Actuator, Vane Type 56-CRB2 Series, ATEX Category 3 | ATEX Directive, Rotary Actuator, Free Mount Type, 55-CRBU2 Series | ATEX Directive, Rotary Actuator, Free Mount Type, 56-CRBU2 Series | ATEX Directive, Low Profile Rotary Actuator, Rack and Pinion Type, 55-CRQ2 Series | ||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||
| Days to Ship | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | Quote | 21 Day(s) or more | 21 Day(s) or more | Quote | Quote | Quote | Quote | Quote |
| Type | Rotary Table 2-point Stop | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output | Rotary Actuator Both Sides Shaft Outputs | Rotary Table 3-point or More | Rotary Actuator One Side Shaft Output | Rotary Actuator One Side Shaft Output | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Table 2-point Stop | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Table 2-point Stop | Rotary Table 2-point Stop | Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output | Rotary Actuator One Side Shaft Output | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Table 2-point Stop | Rotary Table 2-point Stop | Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output | Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs |
| Main Body Shape | Block Shape | Round Shape | Block Shape | Round Shape | Block Shape | Round Shape | Block Shape | Block Shape | Block Shape | Block Shape | Block Shape | Round Shape Block Mount | Block Shape | Block Shape | Round Shape | Round Shape | Block Shape | Block Shape | Round Shape | Block Shape | Block Shape | Block Shape | Block Shape | Block Shape | Round Shape Block Mount | Block Shape | Round Shape | Round Shape | Round Shape | Round Shape | Round Shape | Round Shape Block Mount | Round Shape Block Mount | Block Shape |
| Oscillation Angle A | 190° / Arbitrary Setting Type | 90° / 100° / 180° / 270° / 40° / 45° / 20° / 30° / 60° / 95° / 98° / 110° / 120° / 130° / 135° / 200° / 80° | 90° / 100° / 180° / 190° | 90° / 100° / 180° / 190° / 270° / 280° / 45° / 135° / 225° | 360° | 90° / 100° / 180° / 270° | 190° / Arbitrary Setting Type | Arbitrary Setting Type | 90° / 180° / 360° / 310° / 320° | 90° / 180° / 360° | 90° / 180° | 140° / 90° / 100° / 180° / 270° / 45° / 95° / 110° | 90° / 180° / 190° | 190° | 90° / 100° / 180° / 190° / 270° / 280° | 90° / 180° | 90° / 100° / 180° / 190° | 90° / 100° / 180° / 190° | 90° / 180° | 90° / 100° / 180° / 190° / 270° / 280° / 135° | 90° / 180° | 90° / 100° / 180° / 190° | 190° | 190° | 90° / 100° / 180° / 270° | 90° / 100° / 180° / 190° | 90° / 180° | 90° / 100° / 180° / 270° | 90° / 100° / 180° | 90° / 180° / 270° | 90° / 180° / 270° | 90° | 90° | 90° / 180° |
| Torque(N･m) | - | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 / 20 to Less Than 50 / 50 to Less Than 100 / 100 ~ | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 / 20 to Less Than 50 / 50 to Less Than 100 / 100 ~ | Less than 1 / 1 to Less Than 3 / 6 to Less Than 10 / 10 ~ Less than 20 | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 | 1 to Less Than 3 / 3 ~ Less than 6 | 1 to Less Than 3 | Less than 1 / 1 to Less Than 3 / 6 to Less Than 10 / 10 ~ Less than 20 | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 | 1 to Less Than 3 / 3 ~ Less than 6 / 10 ~ Less than 20 | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 | 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 | 1 to Less Than 3 / 3 ~ Less than 6 / 10 ~ Less than 20 | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 / 20 to Less Than 50 | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 20 to Less Than 50 | 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 / 20 to Less Than 50 / 50 to Less Than 100 / 100 ~ | - | 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 20 to Less Than 50 | 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 / 20 to Less Than 50 / 50 to Less Than 100 / 100 ~ | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 | - | - | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 | 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 / 20 to Less Than 50 / 50 to Less Than 100 / 100 ~ | 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 20 to Less Than 50 | 10 ~ Less than 20 / 20 to Less Than 50 / 50 to Less Than 100 / 100 ~ | 10 ~ Less than 20 / 20 to Less Than 50 / 50 to Less Than 100 | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 | 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 | 3 ~ Less than 6 | Less than 1 / 1 to Less Than 3 | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 |
| Operation Method | Double Rack | Single Vane / Double Vane | Single Rack | Single Vane / Double Vane | Others | Single Vane / Double Vane | Double Rack | Single Rack | Others | Single Rack / Double Rack | Single Rack / Double Rack | Single Vane / Double Vane | Single Rack / Double Rack | Single Rack / Double Rack | Single Vane / Double Vane | Single Vane / Double Vane | Single Rack | Single Rack | Single Vane | Single Vane / Double Vane | Single Rack / Double Rack | Single Rack | Double Rack | Double Rack | Single Vane / Double Vane | Single Rack | Single Vane / Double Vane | Single Vane / Double Vane | Single Vane / Double Vane | Single Vane / Double Vane | Single Vane / Double Vane | Single Vane | Single Vane | Double Rack |
| Environment, Applications | Standard | Standard | Standard / Heat Resistant | Standard | High-Speed | Standard | Standard | Standard | High-Speed | Standard | Standard / Copper-Based / fluoropolymer-Based Material Not Used (Partially Platting Supported) | Standard | Slow Speed | Standard | Copper-Based / fluoropolymer-Based Material Not Used (Partially Platting Supported) / Cleanroom | Standard | Standard / Heat Resistant | Standard | Standard | Standard | Slow Speed | Cleanroom | Copper-Based / fluoropolymer-Based Material Not Used (Partially Platting Supported) / Cleanroom | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Rigidity, Accuracy | Standard / High Rigidity, High Accuracy | Standard | Standard | Standard | Standard / High Rigidity, High Accuracy | Standard | Standard / High Rigidity, High Accuracy | Standard | Standard / High Rigidity, High Accuracy | Standard | Standard / High Rigidity, High Accuracy | Standard | Standard | Standard / High Rigidity, High Accuracy | Standard | Standard | Standard | Standard | High Rigidity, High Accuracy | Standard | Standard | Standard | Standard / High Rigidity, High Accuracy | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Tube Nominal Dia. | 15 ～ 40 | 10 ～ 40 | 30 ～ 100 | 50 ～ 100 | - | 10 ～ 40 | - | 32 ～ 40 | - | 10 ～ 40 | 10 ～ 50 | 10 ～ 40 | 10 ～ 50 | 6 ～ 12 | - | 9 ～ 16 | 50 ～ 100 | 6 ～ 8 | 9 ～ 16 | 50 ～ 100 | 10 ～ 40 | - | ø6 ～ ø40 | ø15 ～ ø32 | 10 ～ 40 | 50 ～ 100 | - | - | - | - | - | - | - | - |
| Valves | N/A | N/A | N/A / Provided | N/A | N/A | N/A | N/A | N/A / Provided | N/A | N/A / Provided | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A / Provided | N/A | N/A | N/A | N/A | N/A | Provided | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Allowable Kinetic Energy(J) | 0.005 to Less Than 0.01 / 0.01 to Less Than 0.1 / 0.1 to Less Than 1 / 1 ~ Less than 50 | Less than 0.005 / 0.01 to Less Than 0.1 | 0.01 to Less Than 0.1 / 0.1 to Less Than 1 / 1 ~ Less than 50 | 0.005 to Less Than 0.01 / 0.01 to Less Than 0.1 / 0.1 to Less Than 1 | - | Less than 0.005 / 0.01 to Less Than 0.1 | 0.005 to Less Than 0.01 / 0.01 to Less Than 0.1 | 0.01 to Less Than 0.1 | - | Less than 0.005 / 0.01 to Less Than 0.1 / 0.1 to Less Than 1 | 0.1 to Less Than 1 / 1 ~ Less than 50 | Less than 0.005 / 0.01 to Less Than 0.1 | 0.005 to Less Than 0.01 / 0.01 to Less Than 0.1 | Less than 0.005 / 0.005 to Less Than 0.01 | Less than 0.005 / 0.005 to Less Than 0.01 / 0.01 to Less Than 0.1 / 0.1 to Less Than 1 | 0.005 to Less Than 0.01 / 0.01 to Less Than 0.1 | 0.01 to Less Than 0.1 / 0.1 to Less Than 1 | Less than 0.005 | 0.005 to Less Than 0.01 / 0.01 to Less Than 0.1 | 0.01 to Less Than 0.1 / 0.1 to Less Than 1 | Less than 0.005 / 0.01 to Less Than 0.1 | 0.01 to Less Than 0.1 / 0.1 to Less Than 1 | Less than 0.005 / 0.005 to Less Than 0.01 / 0.01 to Less Than 0.1 / 0.1 to Less Than 1 / 1 ~ Less than 50 | 0.005 to Less Than 0.01 / 0.01 to Less Than 0.1 / 0.1 to Less Than 1 | Less than 0.005 / 0.01 to Less Than 0.1 | 0.01 to Less Than 0.1 / 0.1 to Less Than 1 / 1 ~ Less than 50 | - | 0.01 to Less Than 0.1 / 0.1 to Less Than 1 | 0.01 to Less Than 0.1 / 0.1 to Less Than 1 | Less than 0.005 / 0.01 to Less Than 0.1 | Less than 0.005 / 0.01 to Less Than 0.1 | 0.01 to Less Than 0.1 | Less than 0.005 | 0.01 to Less Than 0.1 / 0.1 to Less Than 1 |
Loading...
Configure
Specification/Dimensions
-
Type
-
Main Body Shape
-
Oscillation Angle A
-
Torque(N･m)
- Less than 1
- 1 to Less Than 3
- 3 ~ Less than 6
- 6 to Less Than 10
- 10 ~ Less than 20
- 20 to Less Than 50
- 50 to Less Than 100
- 100 ~
There might be logical torque values. Please refer to technical data of each manufacturer for details
-
Operation Method
-
Environment, Applications
-
Rigidity, Accuracy
- Standard
- High Rigidity, High Accuracy
-
Tube Nominal Dia.
-
Valves
-
Allowable Kinetic Energy(J)
Narrow search by specifying Manufacturer
-
- SMC (34)
- CKD (5)
- KOGANEI (3)
- KURODA PNEUMATICS (3)
CAD
-
- 2D
- 3D
Related Categories to Rotary Actuators
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy