(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
TDK-LAMBDA Switching Power Supplies（Representative Standard：CSA）
| Days to Ship |
|
|---|
-
Switching Power Supplies HWS Series Unit Type
TDK-LAMBDA
[Features]
·Environmentally friendly: Not only does the highly-efficient design reduce the heat loss, but it also stops the cooling fan when the external control turns off the unit, providing the quiet environment and contributing to energy saving of customers' equipment.
·Easy to use: The height of all product lineups has been unified to 82 mm, which fits the 2U rack without a dead space.
·Safety and security: The "safety terminal" has covered live parts for ensured safety, and the anti-drop screw design prevents the fall of terminal screws during maintenance work.- CAD ：
- 2D
Standard Price: MYR 1,128.05- Days to Ship: 4 Day(s) or more -
AC Input Switching Power Supply (AC-DC Converter), HWS-A Series
TDK-LAMBDA
• HWS-A Series AC Input Switching Power Supply AC-DC Converter.
• Compliant Safety Agency Certifications IEC/EN/UL/CSA60950-1, IEC/EN/UL/CSA62368-1 EN50178-1, UL508 and CE Mark.
• Harmonic Compliance: IEC61000-3-2 Class A.
• EMC Directives: EN55011 / EN55022-B, FCC-B, VCCI-B .
• Input Voltage Range AC (Alternating Current) 85 - 265V. or DC (Direct Current) 120-370V.
• Input Frequency 47 – 63 Hz.
• Output voltage is DC (Direct current), voltages 3 (3.
3V), 5, 12, 15, and 24VDC.
• OPERATING INDICATION: LED (Green color).
• Operating Temperature: -10˚ to +70°C.
• Connectors type Screw terminals.
• Using Cooling method convection.
• Case Material is Aluminum.Standard Price: MYR 171.82- Days to Ship: 9 Day(s) or more -
On-Board Power Supply, CC-E Series
TDK-LAMBDA
[Features]
·The mounting area has been reduced to approx. half of its conventional types.
·No tantalum capacitors or aluminum electrolytic capacitors are used.
·Built-in remote ON/OFF function in all series.
·Highly accurate output voltage of ±3% (single output of 10 W or less).
·Low noise design with metal shields on 5 sides.
·Lightweight design without resin filling.
·Supports DIP insertion, SMD mounting, and SIP vertical insertion (3 W products).Standard Price: MYR 43.71- Days to Ship: 2 Day(s) or more -
Switching Power Supplies DLP Series Unit Type
TDK-LAMBDA
DIN rail compatible. Power conversion efficiency: 87%. Equipped as standard with a voltage drop alarm lamp. Wide operating ambient temperature range. Can be used at 100% loads. European terminals are also available.
[Features]
· DIP rail mounting compatible power supply.
· Alarm (ALM) LED display.
· When overload / output short circuit, red LED lights up.
· Wide operating temperature range.
· -10 up to +50°C full load available.
· DLP78 / 100/120/180, load factor 60% +60°C.
· DLP240, load factor 60% +70°C.
· Long output hold time; at 100V 20ms / at 230V 30ms.
· DLP-PU.
· A DLP series diode box for backup and parallel operation (two units / maximum load 20A.)
· Individual power operation state displayed by LED and output as an output signal (relay contact output).- CAD ：
- 2D
Standard Price: MYR 368.21- Days to Ship: 4 Day(s) or more -
Unit type power supply JWT series
TDK-LAMBDA
[Features]
· Three output unit power supply compliant with harmonic current regulationStandard Price: MYR 566.34- Days to Ship: 4 Day(s) or more -
TDK-LAMBDA
[Features]
· CE marked.
· Complies with limits for harmonic current emissions.
· A wide 100 V / 200 V input, multi-output, low-cost type.
· Suitable for applications ranging from industrial automation equipment to chemical analysis equipment.
· Remote ON/OFF control available as an option.Standard Price: MYR 566.72- Days to Ship: 4 Day(s) or more -
Switching Power Supplies For DIN Rail, DRJ Series
TDK-LAMBDA
[Features]
· Power supply for DIN rail mounting, in a uniform height of 75 mm for all models.
· Block terminals (safety terminals) and spring-lock terminals are included in the input terminal lineup.
· Spring-lock terminals are spring-operated.
· Smaller size derived from high efficiency: Maximum efficiency of 90% (DRJ100-24-1).
· 45% smaller in volume compared to conventional product model (DLP100-24-1).
· A wide operating ambient temperature range.
· Can be used from -20 to +70°C (100% load factor from -10 to +55°C).
· Compliant with SEMI-F47 standards (at 200 V input).Standard Price: MYR 265.90- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Capacity(W) |
| Output voltage (Single only) |
| Shape |
| Input Voltage |
| Rated output current (single only)(A) |
| Single/multi |
| Dimension height(mm) |
| Input/output terminal shape |
| Representative Standard |
| Dimension depth(mm) |
| Number of Channels |
| Dimension width(mm) |
| Included Function |
|
|
|
|
|
|
| |
| Brand | TDK-LAMBDA | TDK-LAMBDA | TDK-LAMBDA | TDK-LAMBDA | TDK-LAMBDA | TDK-LAMBDA | TDK-LAMBDA |
| Product Series | AC Input Switching Power Supply (AC-DC Converter), HWS-A Series | ||||||
| CAD |
|
| |||||
| Days to Ship | 4 Day(s) or more | 9 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more |
| Capacity(W) | 1,000 ～ 1000 | 15 | 1.5 ～ 10 | 75 ～ 120 | 75 | 75 | - |
| Output voltage (Single only) | DC5V / DC12V / DC24V / DC48V / Other / DC36V | DC5V / DC12V / DC24V | DC3.3V / DC5V / DC12V | DC24V | - | - | DC24V |
| Shape | With Cover | With Cover / Open frame | On-board | DIN rail direct attachment | With Cover / Open frame | With Cover / Open frame | DIN rail direct attachment |
| Input Voltage | AC/DC | AC/DC / AC-dedicated | Other | AC-dedicated | AC/DC | AC/DC | AC/DC |
| Rated output current (single only)(A) | 7 ～ 120 | - | 0.125 ～ 2.5 | 3.1 ～ 5 | - | - | - |
| Single/multi | Single | Single | Single / Other | Single | Multi | Multi | Single |
| Dimension height(mm) | 82 | 82 | 8.5 ～ 17.9 | 97 | 92 | 92 | - |
| Input/output terminal shape | Screw / Other | Screw | Other | Other | Other | Screw / Other | Screw |
| Representative Standard | CSA | CSA | CSA | CSA | CSA | CSA | CSA |
| Dimension depth(mm) | 165 ～ 280 | 80 ～ 99 | 9.2 ～ 22.6 | 110 | 208 | 208 ～ 223 | 110 |
| Number of Channels | - | - | 2 | - | - | 3 | - |
| Dimension width(mm) | 61 ～ 126.5 | 26.5 ～ 31.5 | 16.51 ～ 35.56 | 50 ～ 60 | 42 | 42 ～ 48 | 21.5 |
| Included Function | Fan for cooling / Parallel | - | Coating | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Capacity(W)
-
Output voltage (Single only)
- DC3.3V
- DC5V
- DC12V
- DC15V
- DC24V
- DC48V
- Other
- DC36V
-
Shape
- With Cover
- DIN rail direct attachment
- Open frame
- On-board
- Other
-
Input Voltage
- AC/DC
- AC-dedicated
- Other
-
Rated output current (single only)(A)
- 0.05-0.5
- 0.1-1.0
- 0.125
- 0.13
- 0.2-7.5
- 0.2-5.0
- 0.2-3.8
- 0.2-2.5
- 0.22
- 0.25
- 0.3
- 0.35
- 0.4
- 0.42
- 0.45
- 0.5
- 0.6
- 0.62
- 0.65
- 0.7
- 0.8
- 0.84
- 0.9
- 0.96
- 1
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.67
- 1.7
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.8
- 3
- 3.1
- 3.2
- 3.3
- 3.33
- 3.5
- 3.75
- 3.8
- 4
- 4.1
- 4.2
- 4.3
- 4.5
- 4.6
- 5
- 6
- 6.25
- 6.3
- 6.4
- 6.5
- 6.7
- 6.8
- 7
- 7.4
- 7.5
- 8
- 8.3
- 8.4
- 8.5
- 9.2
- 9.4
- 10
- 12.5
- 13
- 14
- 14.6
- 15
- 16
- 16.7
- 17
- 18
- 20
- 21
- 22
- 23
- 25
- 25.6
- 26
- 27
- 28
- 30
- 30.7
- 31.5
- 32
- 40
- 42
- 44
- 46
- 50
- 53
- 60
- 64
- 64-70
- 67
- 70
- 84
- 88
- 100
- 120
- 125
-
Single/multi
- Single
- Multi
- Other
-
Dimension height(mm)
-
Input/output terminal shape
-
Representative Standard
-
Dimension depth(mm)
-
Number of Channels
- 2
- 3
- Other
-
Dimension width(mm)
-
Included Function
- Coating
- Fan for cooling
- Parallel
- Numeric value display
- Alarm Output
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- COSEL (35)
- TDK-LAMBDA (7)
- NIPRON (2)
- OMRON (2)
- IDEC (1)
- SWALLOW ELECTRIC (0)
- MEAN WELL (0)
- PHOENIX CONTACT (0)
CAD
-
- 2D
- 3D
Related Categories to Switching Power Supplies
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy