(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
YAMAWA MFG Screw-Hole-Related Tools（Hole type：For blind hole）
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
| Days to Ship |
|
|---|
-
Torqueless Roll Taps with Short Chamfer_SC-TL-RZ
YAMAWA MFG
The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.
Days to Ship: 7 Day(s) or more -
Hand Taps_HT【1-146 Pieces Per Package】
YAMAWA MFG
Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.Days to Ship: 1 Day(s) or more -
YAMAWA MFG
A coating roll tap suitable for threading steel and nonferrous materials.
Days to Ship: 5 Day(s) or more -
Spiral Fluted Taps_SP【1-99 Pieces Per Package】
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
[Features]
・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
・ Intermittent cutting of female threads with keyway is also possible.
・ Capable of machining both synchronously and asynchronously.
・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
・ The tap can easily cut.
・ Intermittent cutting of pilot holes with keyway is also possible.
・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
[Applications]
・ Ideal for machining blind holes.Days to Ship: 1 Day(s) or more -
Spiral Fluted Taps for Taper Pipe Threads, Long (ℓg) Type_SP-PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Standard Price: MYR 200.73- Days to Ship: 8 Day(s) or more -
Hand Taps for American Taper Pipe Threads_NPT
YAMAWA MFG
Tap for machining American taper pipe "NPT" female threads.
[Features]
· The groove is a straight hand tap type. Comes with three biting teeth at the tip.
· General-purpose tap for general steel materials.
[Applications]
· To be used when machining American tapered pipe thread for pipes "NPT" female thread.
* American standard pipe threads, available in many types, can be complicated.
* Check carefully when purchasing taps, as there are various kinds available such as "NPT", "NPTF", "NPS", and "NPSF".Standard Price: MYR 251.80- Days to Ship: 8 Day(s) or more -
Hand Taps for Stainless Steels_SU-HT【1-89 Pieces Per Package】
YAMAWA MFG
Hand tap suitable for machining extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 5 m/min or less is recommended.
[Applications]
Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.Days to Ship: 7 Day(s) or more -
Roll Taps for Steels_N+RZ【1-80 Pieces Per Package】
YAMAWA MFG
A roll tap suitable for threading steel materials (carbon steel, alloy steel, stainless steel, etc.).
Days to Ship: 7 Day(s) or more -
Hand Taps for Cast Irons_FC-HT
YAMAWA MFG
[Features]
· Suitable for thread machining with brittle and hard materials such as cast iron, designed appropriately oversized to handle rapid wear.Standard Price: MYR 52.35- Days to Ship: 8 Day(s) or more -
Hand Taps for Left Hand Threads_HT-LH【1-151 Pieces Per Package】
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Days to Ship: 5 Day(s) or more -
Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI
YAMAWA MFG
Hand tap for machining female threads for inserting insert coils.
[Features]
· Blade designed to be ideal for aluminum type work materials, enabling stable female thread machining to be performed.
· 2 types are available, with 5P or 1.5P biting threads, to suit the application used.
· Screw precision in accordance with class 1b.
· Work material: Aluminum rolled material, aluminum alloy casting, zinc alloy casting.
[Applications]
Ideal for machining female threads for inserting insert coils after threading.Standard Price: MYR 93.33- Days to Ship: 8 Day(s) or more -
Spiral Fluted Taps for American Taper Pipe Threads_SP-NPT
YAMAWA MFG
■ The SP-NPT is a spiral flute tap for the Americantapered pipe threads and is used for productswhose main purpose is the tightness of threadedparts in connection with pipe parts etc.
Standard Price: MYR 447.04- Days to Ship: 8 Day(s) or more -
Hand Taps for American Parallel Pipe Threads_NPS
YAMAWA MFG
■ The NPS tap is a hand tap for American parallelpipe threads and is used for products whosemain purpose is the tightness of the threadedpart in connecting pipe parts and the like.
Standard Price: MYR 305.03- Days to Ship: 8 Day(s) or more -
Spiral Fluted Taps, Oxidized_SP-OX【1-79 Pieces Per Package】
YAMAWA MFG
Spiral taps with oxide treatment (OX).
[Features]
· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil.
· The oil pocket acts to reduce the frictional resistance, preventing parts welding together, and improves the finished surface roughness of the female thread.
· Oxide treatment also removes residual stress from the tap, extending the life span.
[Applications]
· Ideal for machining easily welded materials such as stainless steel or low carbon steel.Days to Ship: 8 Day(s) or more -
Spiral Fluted Taps for Nickel Base Alloys_ZEN-B【1-107 Pieces Per Package】
YAMAWA MFG
A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.
Standard Price: MYR 82.45- Days to Ship: 7 Day(s) or more -
Roll Taps for Miniature Threads_MS+RS
YAMAWA MFG
[Features]
Improved tool rigidity, torsional strength and tap runout accuracy by adopting a new blank shape!
· Markings that may hinder the roundness of the shank are moved to the shank square.
· Improved precision of machined female thread by adopting new thread precision "GS grade"!Standard Price: MYR 326.59- Days to Ship: 8 Day(s) -
Long Shank Spiral Fluted Taps_LS-SP
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.
Days to Ship: 5 Day(s) or more -
Long Shank Spiral Fluted Taps for Left Hand Threads_LS-SP-LH
YAMAWA MFG
* LS-N-SP will switch to LS-SP(LH) as soon as the stock runs out.
Standard Price: MYR 485.67- Days to Ship: 8 Day(s) or more -
Hand Taps for Taper Pipe Threads Short (ℓg) Type_S-PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Standard Price: MYR 149.27- Days to Ship: 7 Day(s) or more -
Carbide Taps for Parallel Pipe Threads_CT-PF
YAMAWA MFG
This is a carbide hand tap for parallel pipe threads suitable for mass-production with hard and brittle materials such as cast iron. [Features]·Chamfer 3.5P; straight groove shape carbide hand tap.
Standard Price: MYR 921.59- Days to Ship: 7 Day(s) or more -
Spiral Fluted Taps for High Speed Tapping_F-SP
YAMAWA MFG
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
Days to Ship: 9 Day(s) or more -
Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX
YAMAWA MFG
It is suitable for tapping high carbon steel such as S55C. Has undergone oxidation treatment.
Days to Ship: 7 Day(s) or more -
Short Spiral Fluted Taps, Deep Hole Use_S-SP【1-161 Pieces Per Package】
YAMAWA MFG
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.Days to Ship: 6 Day(s) or more -
Carbide Taps for Light Alloys_N-CT-FC
YAMAWA MFG
A carbide tap suitable for thread machining of hard and brittle material such as cast iron.
Standard Price: MYR 364.11- Days to Ship: 5 Day(s) or more -
Carbide taps for ultra hard materials_UH-CT
YAMAWA MFG
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
Standard Price: MYR 470.88- Days to Ship: 5 Day(s) or more -
Spiral Fluted Taps for Tough Stainless Steels_SU2-SP【1-162 Pieces Per Package】
YAMAWA MFG
Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.
Days to Ship: 7 Day(s) or more -
Hand Taps for Hard-to-Machine Materials_EH-HT【1-169 Pieces Per Package】
YAMAWA MFG
Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.
Days to Ship: 8 Day(s) or more -
Roll Taps for Non-Ferrous Materials_N+RS
YAMAWA MFG
A roll tap suitable for threading non-ferrous materials (aluminum casting, aluminum die casting, brass etc.).
Days to Ship: 7 Day(s) or more -
For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP
YAMAWA MFG
Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Also suitable for horizontal/vertical machining of blind holes in materials such as carbon steel and alloy steel.
Standard Price: MYR 135.63- Days to Ship: 7 Day(s) or more -
For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Aluminum_HFAHS
YAMAWA MFG
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Suitable for blind holes in aluminum castings, for longitudinal machining.
Standard Price: MYR 135.63- Days to Ship: 6 Day(s) or more -
For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Aluminum_HFASP
YAMAWA MFG
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Suitable for blind holes in aluminum castings, for transverse machining.
Standard Price: MYR 135.63- Days to Ship: 7 Day(s) or more -
For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Steels_HFIHS
YAMAWA MFG
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for vertical machining of blind holes in materials such as carbon steel and alloy steel.
Standard Price: MYR 135.63- Days to Ship: 7 Day(s) or more -
For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP
YAMAWA MFG
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for horizontal machining of blind holes in materials such as carbon steel and alloy steel.
Standard Price: MYR 135.63- Days to Ship: 6 Day(s) or more -
For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Aluminum_HDASP
YAMAWA MFG
Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Suitable for blind holes in aluminum castings, for both longitudinal and transverse machining.
Standard Price: MYR 135.63- Days to Ship: 7 Day(s) or more -
X Series Hand Taps for Taper Pipe Threads Short (ℓg) Type_PT-X
YAMAWA MFG
■ PT-X hand tap, adopting new tap blank, ensuresproperly long projection length of the tool.Having short thread length, this tap is suitablefor tapping of such machine components ashave the limit in their thickness.
Standard Price: MYR 153.98- Days to Ship: 9 Day(s) or more -
X Series Spiral Fluted Taps for Taper Pipe Threads Short (ℓg) Type_SP-PT-X
YAMAWA MFG
■ SP-PT-X spiral fluted tap, adopting newblank, ensures properly long projection lengthof the tool. Having short thread length, thistap is suitable for tapping of such machinecomponents as have the limit in their thickness.
Standard Price: MYR 189.29- Days to Ship: 9 Day(s) -
YAMAWA MFG
The blade shape adopted is less prone to damage during machining of aluminum alloy castings, etc. Achieves a longer life.
Days to Ship: 9 Day(s) -
Hand Taps for American Dryseal Taper Pipe Threads_NPTF
YAMAWA MFG
Tap for machining American taper pipe "NPTF" female threads.
[Features]
· The groove is a straight hand tap type. Comes with three biting teeth at the tip.
· General-purpose tap for general steel materials.
[Applications]
· To be used when machining American tapered thread for dry seal pipe "NPTF" female thread.
* American standard pipe threads, available in many types, can be complicated.
* Check carefully when purchasing taps, as there are various kinds available such as "NPT", "NPTF", "NPS", and "NPSF".Standard Price: MYR 300.93- Days to Ship: 8 Day(s) or more -
Long Shank Hand Taps for American Dryseal Taper Pipe Threads_LS-NPTF
YAMAWA MFG
■ The LS-NPTF is a long shank hand tap for theAmerican dry seal tapered pipe threads andis used for products whose main purpose isto withstand screw threads in connection withparts for pipes.
Standard Price: MYR 749.52- Days to Ship: 8 Day(s) -
Hand Taps for American Taper Pipe Threads, Short (ℓg) Type_S-NPT
YAMAWA MFG
■ The S-NPT is a hand tap for the Americantapered pipe threads and is used for tappingwhere it is necessary to shorten the fittinglength for piping parts. Its main purpose istightness of threaded parts in connection withpipe parts etc.
Standard Price: MYR 304.49- Days to Ship: 8 Day(s) or more -
Long Shank Spiral Fluted Taps for American Taper Pipe Threads, Short (ℓg) Type_LS-SP-S-NPT
YAMAWA MFG
■ The SP-NPT is a long shank spiral flute tap forthe American tapered pipe threads where it isnecessary to shorten the fitting length and isused for products whose main purpose is thetightness of threaded parts in connection withpipe parts etc.
Standard Price: MYR 790.54- Days to Ship: 8 Day(s) or more -
Long Shank Hand Taps for American Taper Pipe Threads_LS-NPT
YAMAWA MFG
■ The LS-NPT is a long shank tap for the Americantapered pipe threads and is used for productswhose main purpose is the tightness of threadedparts in connection with pipe parts etc.
Standard Price: MYR 650.47- Days to Ship: 8 Day(s) or more -
Hand Taps for American Dryseal Parallel Pipe Threads_NPSF
YAMAWA MFG
■ The NPSF is a hand tap for the American dryseal parallel pipe threads and is used for screwtapping of products whose main purpose is thetightness of threaded parts in connection withpipe parts etc.
Standard Price: MYR 366.07- Days to Ship: 8 Day(s) or more -
Spiral Fluted Taps for Aluminum_AL+SP
YAMAWA MFG
A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.
[Features]
· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.
· Stable, clean thread machining can be performed.
[Applications]
· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.
· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.Standard Price: MYR 44.71- Days to Ship: 5 Day(s) or more -
Hand Taps with Short Chamfer for Magnesium Alloy Castings_MG-HT
YAMAWA MFG
There is less than 1 chamfer thread, making it ideal for blind holes without any spare depth in the pilot hole.
Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product Series | Spiral Fluted Taps for Taper Pipe Threads, Long (ℓg) Type_SP-PT | Hand Taps for Stainless Steels_SU-HT【1-89 Pieces Per Package】 | Hand Taps for Left Hand Threads_HT-LH【1-151 Pieces Per Package】 | Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI | Spiral Fluted Taps for Nickel Base Alloys_ZEN-B【1-107 Pieces Per Package】 | Long Shank Spiral Fluted Taps for Left Hand Threads_LS-SP-LH | Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX | Short Spiral Fluted Taps, Deep Hole Use_S-SP【1-161 Pieces Per Package】 | Spiral Fluted Taps for Tough Stainless Steels_SU2-SP【1-162 Pieces Per Package】 | Hand Taps for Hard-to-Machine Materials_EH-HT【1-169 Pieces Per Package】 | For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP | For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Aluminum_HFAHS | For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Aluminum_HFASP | For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Steels_HFIHS | For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP | For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Aluminum_HDASP | X Series Hand Taps for Taper Pipe Threads Short (ℓg) Type_PT-X | X Series Spiral Fluted Taps for Taper Pipe Threads Short (ℓg) Type_SP-PT-X | Long Shank Hand Taps for American Dryseal Taper Pipe Threads_LS-NPTF | Hand Taps for American Taper Pipe Threads, Short (ℓg) Type_S-NPT | Long Shank Spiral Fluted Taps for American Taper Pipe Threads, Short (ℓg) Type_LS-SP-S-NPT | Hand Taps with Short Chamfer for Magnesium Alloy Castings_MG-HT | |||||||||||||||||||||||
| Days to Ship | 7 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 1 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 8 Day(s) | 5 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more |
| Screw size (Nominal) | M1 ～ M6 | No.0 ～ M48 | M1 ～ M6 | No.10 ～ M48 | 1'-11 ～ 3/4-14 | 1'-11.5 ～ 3/8-18 | 1/2-20UNF ～ M30 | M1 ～ M20 | M3 ～ M18 | M1 ～ M30 | No.10 ～ M24 | 1'-11.5 ～ 3/8-18 | 1'-11.5 ～ 3/8-18 | No.10 ～ M30 | M3 ～ M20 | S0.6 ～ S0.9 | 1 ～ M36 | M8 ～ M16 | 1'-11 ～ 3/8-19 | 1'-11 ～ 3/8-19 | M3 ～ M12 | M3 ～ M16 | M2 ～ M45 | No.10-32UNF ～ M24 | M2 ～ M20 | M3 ～ M24 | M3 ～ M30 | No.0 ～ M20 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | 1/2-14 ～ 1/16-28 | 1/2-14 ～ 1/16-28 | M6 ～ M12 | 1'-11.5 ～ 3/8-18 | 1 ～ 3/8 | 1'-11.5 ～ 3/8-18 | 1/2-14 ～ 3/8-18 | 1 ～ 3/8 | 1'-11.5 ～ 3/8-18 | M2 ～ M24 | M1.4 ～ M3 |
| Screw Types | Meter | Meter / unified / Sewing Machine | Meter | Meter / unified / Whitworth / Sewing Machine | Taper for Pipe | Taper for Pipe | Meter / unified / Whitworth | Meter | Meter | Meter | Meter / unified | Taper for Pipe | Parallel for Pipes | Meter / unified / Whitworth | Meter | Miniature | Meter / unified / Whitworth | Meter | Taper for Pipe | Parallel for Pipes | Meter | Meter | Meter | Meter / unified | Meter | Meter | Meter | Meter / unified | Meter | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Meter | Meter |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass cast iron (BsC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | High Hardness Steel (50-60 HRC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○] | Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Nickel-based alloy (Inconel, etc.)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] |
| Pitch (P), Number of Threading(mm) | 0.2 ～ 1 | 0.2 ～ 100 | 0.25 ～ 1 | 0.25 ～ 100 | - | - | 0.4 ～ 3.5 | 0.25 ～ 2 | 0.5 ～ 2.5 | 0.25 ～ 3.5 | 0.45 ～ 48 | - | - | 0.3 ～ 56 | 0.5 ～ 2.5 | 0.15 ～ 0.225 | 1 ～ 24 | 1.25 ～ 2 | - | - | 0.5 ～ 1.75 | 0.5 ～ 2 | 0.4 ～ 4.5 | 0.3 ～ 3 | 0.4 ～ 2.5 | 0.5 ～ 3 | 0.5 ～ 3.5 | 0.25 ～ 2.5 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | - | - | 1 ～ 1.75 | - | 11.5 ～ 27 | - | - | 11.5 ～ 27 | - | 0.4 ～ 3 | 0.3 ～ 0.5 |
| Tool Material Type | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | High-speed steel | Cobalt HSS | High-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel |
| Tap Type | Roll tap | Hand Tap | Roll tap | Spiral Tap | Tap for pipes | Tap for pipes | Hand Tap | Roll tap | Hand Tap | Hand Tap | Hand Tap | Tap for pipes | Tap for pipes | Spiral Tap | Spiral Tap | Roll tap | Spiral Tap | Spiral Tap | Tap for pipes | Tap for pipes | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Point tap | Spiral Tap | Hand Tap | Roll tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Tap for pipes | Tap for pipes | Hand Tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Spiral Tap | Hand Tap |
| Hole type | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole |
| Chamfer threads (Lcf) | 1P | 1.5P ～ 5P | 2P ～ 4P | 2.5P | 2.5P | 3P | 1.5P ～ 4P | 2P ～ 4P | 1.5P ～ 5P | 1.5P ～ 5P | 1.5P ～ 5P | 2.5P | 5P | 2.5P | 3P | 2P | 2.5P | 2.5P | 2.5P | 3.5P | 2.5P | 2.5P | 2.5P | 1.5P ～ 3P | 5P | 3P | 2.5P ～ 5P | 2P ～ 4P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 1.5P | 3P | 3P | 3P | 2.5P | 3P | 5P | 1.5P ～ 2.5P | 1P |
| Coating Type | TiCN | - | TiN | - | - | - | - | - | Nitriding Treatment | - | Non-Coated | - | - | - | - | - | - | - | - | - | TiN | - | - | - | TiAlN | - | - | - | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | - | - | TiN | - | - | - | - | - | - | - | - |
| Coating Y/N | Available | NA | Available | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | Available | NA | NA | NA | Available | Available | Available | Available | Available | Available | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA |
| Overall Length (L)(mm) | 36 ～ 62 | 32 ～ 185 | 36 ～ 62 | 36 ～ 195 | 55 ～ 120 | 54 ～ 155 | 42 ～ 135 | 32 ～ 105 | 46 ～ 100 | 36 ～ 135 | 52 ～ 135 | 54 ～ 95 | 54 ～ 120 | 36 ～ 135 | 46 ～ 105 | 36 | 100 ～ 300 | 150 | 55 ～ 155 | 55 ～ 95 | 46 ～ 82 | 46 ～ 95 | 42 ～ 180 | 34 ～ 120 | 40 ～ 105 | 46 ～ 120 | 46 ～ 135 | 36 ～ 105 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 75 ～ 105 | 75 ～ 105 | 62 ～ 82 | 54 ～ 120 | 100 ～ 150 | 54 ～ 120 | 100 ～ 150 | 100 ～ 150 | 54 ～ 120 | 42 ～ 135 | 36 ～ 46 |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No.0
- No.0UN
- NO.0-80UNF
- NO.10
- No.10
- No.1
- No.1UN
- No.10UN
- No.10UNF
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- NO.4
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- 0.7
- S0.7
- 0.8
- No.8
- No.8UN
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- 0.9
- S0.9
- 1
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- PF1
- PF 1
- PS 1
- PT1
- PT 1
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1'-11.5
- 1'-11
- 1-8UNC
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS 1 1/2
- PT 1 1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1'1/2-11.5
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS 1 1/4
- PT 1 1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PS 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1'3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNF
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4-18
- 1/4W20
- 1 5/8
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- M1～6
- W1"7/8
- 1 7/8-8UN
- 1 7/16
- 1 8
- 1'W8
- 1/8
- 1/8PT
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS1/8
- PS 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1/8-18
- 1 9/16
- M1 to 10
- 1'11.5
- 1 12
- 1 14
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16-27
- 1 20
- M1.1
- M1.2
- S1.2
- 1.25
- 1.29
- 1.37
- M1.4
- S1.4
- 1.45
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- PT 2
- R2
- Rp2
- W2
- 2'-11.5
- 2'-11
- 2-8UN
- 2 1/2
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2'1/2-11
- 2'1/2-8
- W2"1/4
- 2'1/4-11
- 2 4.5
- M2 to 4.5
- 2 12
- M2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- G3
- M3
- M3.0
- R3
- Rp3
- STI M3
- 3'-11
- 3'-8
- 3 1/2
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3'1/2-11
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- PS 3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- 3/8UNF
- 3/8W
- G3/8
- M3～8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PS3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 to 10
- 3/16
- SM3/16
- W3/16
- 3/32
- SM3/32
- 3.5
- M3.5
- M3.5
- 4
- 4M
- G4
- M4
- M4.0
- R4
- Rp4
- STI M4
- 4'-11
- M4 to 6
- M4 to 13
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- M5
- STI M5
- 5/1
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-14
- 5/8-11UNC
- 5/8W11
- M5 to 10
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNF
- 5/16W
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32
- W5/32
- 5/64
- 5.5M
- M5.5
- M5.5
- 6
- M6
- M6.0
- STI M6
- No6-40UNF
- M6 to 20
- M7
- M7
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32
- SM7/32
- 7.5
- 8
- M8
- STI M8
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- UNF9/16
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- 9/64
- SM9/64
- 10
- M10
- M10.0
- M10
- STI M10
- Tr 10
- M10 to 13
- M10 to 25
- 11
- M11
- M11
- PG11
- 11/16
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12.0
- M12
- STI M12
- Tr 12
- 13
- M13
- PG13.5
- M14
- M14.0
- M14
- Tr 14
- 15
- M15
- 15/64
- SM15/64
- 16
- M16
- M16.0
- M16
- PG16
- Tr 16
- 17
- M17
- M18
- M18
- Tr 18
- 19
- M19
- M19 to 32
- M19 to 38
- 20
- M20
- M20
- Tr 20
- M21
- PG21
- 22
- M22
- M22
- M22X
- Tr 22
- M23
- M24
- M24
- M24X
- Tr 24
- 25
- M25
- M25X
- Tr 25
- M25 to 50
- M25 to 70
- M26
- Tr 26
- M27
- 28
- M28
- Tr 28
- PG29
- M30
- Tr 30
- 31
- 31/32
- M32
- M33
- M34
- M35
- 36
- M36
- PG36
- M37
- M38
- 39
- M39
- M40
- 42
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.63
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.79
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 100
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (13)
- YAMAWA MFG (122)
- OSG (105)
- NACHI(FUJIKOSHI) (11)
- DC SWISS (5)
- HOZAN (4)
- GUHRING (3)
- SANDVIK (3)
- TRUSCO NAKAYAMA (3)
- RUKO (2)
- ISHIHASHI (1)
- NS TOOL (1)
- H & H (0)
- KANETEC (0)
- KO-KEN TOOL (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- NIIGATA SEIKI (SK) (0)
- TSUBOSAN (0)
- TANOI MFG (0)
- TOP (0)
- ONISHI MANUFACTURING (0)
- ENGINEER (0)
- UNION TOOL (0)
- SKC (0)
- EIKOSHA (0)
- RENNSTEIG (0)
- ESCO (0)
- LIGHTSEIKI (0)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy