(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Kindly be informed that it will be peak period in conjunction with the Chinese New Year festive season. Delivery pickup upon 25 January 2025 estimated would arrive after CNY holidays. Please expect slight delay for orders shipped during this peak season and we thank you for your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Locating Pins（Insertion Guide Tolerance：g6）
Basic Shape
-
Large Head -
Small Head -
Straight / Air Vent -
Shouldered -
Screw Mounted -
Flanged -
Double-Stepped -
IKOU
-
Straight
-
- Recommendation
Locating Pins - Straight, Tapered
MISUMI
This Straight, Press Fit Type product archives a short lead time and low price by narrowing the size and tolerance for specific applications.
- Volume Discount
Standard Price: MYR 2.79- Days to Ship: 1 Day(s) or more -
![Locating Pin - Straight, Configurable[RoHS Comliant]](//content.misumi-ec.com/image/upload/t_product_view_b/t_misumi_wm/v1/p/jp/product/series/110310866249/110310866249_001_20230913143356.jpg?$product_view_b$)
Locating Pin - Straight, Configurable[RoHS Comliant]
MISUMI
RoHS10 compliant.
Straight Type Locating Pins with the diameter configurable in 0.01 mm increments. *The minimum order quantity is 30 pcs. Please check with the part number tab or WOSDays to Ship: 6 Day(s) or more -
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit
MISUMI
- Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit from MISUMI.
- Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.
- When the P dimension is small, a centering hole will cause the sphere section to become small.Days to Ship: 3 Day(s) or more -
Days to Ship: 4 Day(s) -
Height Adjusting Pins - Counterbored
MISUMI
- Height Adjusting Pins – Counterbored from MISUMI.
- Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Hard Chrome Plating products are not available in Precision Grade Tolerance.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Air Vent (Tapped)
MISUMI
- Locating Pins - Air Vent (Tapped) from MISUMI.
- Since there is an air groove, it is easy to insert a pin. It is attached with a female thread.
- The material of pin can be selected 3 types, SUJ2 or SUS304 Equivalent, SUS440C or 13Cr stainless.
- Mounting method can be selected 2 types, Thread or Tapped.
- The outer diameter of pin can be selected 5 sizes, 5, 6, 8, 10, and 12 mm.
- The tolerance of outer diameter is g6.- Volume Discount
Standard Price: MYR 6.61- Days to Ship: 1 Day(s) or more -
Locating Pins - Small Head, Round Tapered - Press Fit
MISUMI
- Locating Pins - Small Head, Round Tapered - Press Fit from MISUMI.
- Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - High Hardness Stainless Steel, Straight (Tapped)
MISUMI
- Locating Pins - High Hardness Stainless Steel, straight (Tapped) from MISUMI.
- The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
- The tightening torque (ref. value) for hardened products is strength class 10.9. Not applicable when using locking materials or lock washers.
- For tapped type, unless described otherwise on the drawing, the spec. design is the same as for Press Fit Type. For D Tolerance g6, h7, no Insertion guide is provided. (ℓ1)Days to Ship: 6 Day(s) or more -
Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit)
MISUMI
Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.
Days to Ship: 3 Day(s) or more -
Locating Pins - Straight, Sphere (Tapped)
MISUMI
- Locating Pins - Straight, Sphere (Tapped) from MISUMI.
- The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- When the D dimension is small, a centering hole will cause the sphere section to become small.
- On some combination of dimensions, the center hole may not be available.
- Polishing and centering hole is sometimes not available for SUS304.Days to Ship: 3 Day(s) or more -
Locating Pins - Small Head, Round Tapered - Tapped
MISUMI
- Locating Pins - Small Head, Round Tapered – Tapped from MISUMI.
- Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished and centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.- Volume Discount
Days to Ship: 3 Day(s) or more -
MISUMI
- Locating Pins - Press Fit from MISUMI.
- Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole sometimes not available for SUS304.
- Provided 3 options of alteration, Insertion guide (GDC), Air vent (AC), or C Chamfered Size Changes (CN).Days to Ship: 3 Day(s) or more -
Marker Pins - with Flathead Slot
MISUMI
- Marker Pins - with Flathead Slot, JPLB / JPLBK / JPLBM / JPLBS series from MISUMI.
- Have the Flathead Slot provided and thus, can be mounted easily by using the screwdriver.
- The material of marker pin can be selected 2 types, Steel S45C Equivalent, Stainless Steel SUS304.
- SUS304 type marker pins may not be polished and may have no centering hole.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 3 Day(s) or more -
Locating Pins - Plastic, Small Diameter
MISUMI
- Locating Pins - Plastic, Small Diameter from MISUMI.
- Having a metal core, it is less prone to be broken when used for side locating.
- The outer diameter tolerance is the result of measurement at room temperature.
- Core Rod material of locating pin is made of SUS304.
- There is a flat part of Ø0.2 or below at the tip of Straight Type, Spherical Type and Small Head Type.
- MC nylon of flat tip type is not available.Days to Ship: 6 Day(s) or more -
Locating Pins - Straight, Sphere (Press Fit)
MISUMI
- Locating Pins - Straight, Sphere (Press Fit) from MISUMI.
- The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- When the D dimension is small, a centering hole will cause the sphere section to become small.
- On some combination of dimensions, the center hole may not be available.
- Polishing and centering hole is sometimes not available for SUS304.Days to Ship: 3 Day(s) or more -
One-Touch Flex Locator, Knob Type (Taper Pin)
IMAO CORPORATION
Space saving knob type. Main body, shaft: SCM440. Black oxide coating. Taper pin: SCM440. Salt-bath nitriding treatment. Knob: SCS13 (equivalent to SUS304). Pin: SUS304
Standard Price: MYR 1,232.40 Days to Ship: 8 Day(s) -
![[Clean & Pack] Locating Pin - Large Head, Tapered, Taper Angle Configurable, Tolerance Selectable, Press Fit](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664919/110310664919_001_20230911105917.jpg?$product_view_b$)
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.Days to Ship: 9 Day(s) or more -
Marker Pins - Hexagon Socket Type
MISUMI
- Marker Pins - Hexagon Socket Type from MISUMI.
- Hex hole enables easy mounting with a hex wrench.
- The material of locating pin can be selected 4 types, SKS3 Equivalent, S45C Equivalent, SUS304, SUS440C or 13Cr stainless.
- SUS304 may not be polished and may have no centering hole.
- The pin with small thread diameter has thin under-head part.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 3 Day(s) or more -
Locating Pins - Air Vent (Threaded)
MISUMI
[Features]Since there is an air groove, it is easy to insert a pin. It is attached with a male thread.
- Volume Discount
Standard Price: MYR 14.33- Days to Ship: 2 Day(s) or more -
Locating Pins - Straight, Tapered (Tapped)
MISUMI
- Locating Pins - Straight, Tapered (Tapped) from MISUMI.
- The short lead time and economical price are achieved by narrowing down the tolerance and dimensions.
- The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
- On some combination of dimensions, the center hole may not be available.
- Polishing and centering hole is sometimes not available for SUS304.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 3 Day(s) or more -
Locating Pins - High Hardness Stainless Steel, Straight (Press Fit)
MISUMI
- Locating Pins - High Hardness Stainless Steel, straight (Press Fit) from MISUMI.
- A straight positioning pin made of high hardness stainless steel.
- Insertion Guide Tip Type can be selected into 3 types, Tapered, Tapered R or Spherical.
- Tapped type locating pin provided tapped thread for disassembled.
- For tapped type, unless described otherwise on the drawing, the spec, design is the same as for Press fit type.
- The tightening torque (ref. value) is tightening torque strength class 10.9. Not applicable when using locking materials or lock washers.Days to Ship: 6 Day(s) or more -
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Tapped
MISUMI
- Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Tapped from MISUMI.
- Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped)
MISUMI
- Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped) from MISUMI.
- Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polishing and centering hole is sometimes not available for SUS304.
- When the P dimension is small, a centering hole will cause the sphere section to become small.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit)
MISUMI
- Locating Pins - Shouldered-Taper Angle (D, P Tolerance Selectable-Press Fit) from MISUMI.
- Shouldered with each dimension configurable.
- Pin’s mounting method can be selected 3 types, Thread, Tapped or Press fit.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- SUS304 may not be polished and may have no centering hole.Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded)
MISUMI
[Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a male thread.
Days to Ship: 3 Day(s) or more -
Flanged Locating Pins - Flange Mounted
MISUMI
Locating Pins having the flange shaped for mount. The flange can be fixed with a screw.
Days to Ship: 8 Day(s) or more -
MISUMI
- Plate Centering Pins, BCMPA / CMPA / SCMPA series from MISUMI.
- Suitable for centering thin objects.
- Can be used for attaching gripper.
- Center holes may disappear depending on dimension B.
- The material of pin can be selected 2 types, steel S45C Equivalent or stainless steel SUS304.
- SUS304 Plate Centering Pins may not be polished and may have no centering hole.
- When the L dimension of tapped type is less than Mx4, the tapped hole or pilot hole for tapping may go through.Days to Ship: 3 Day(s) or more -
Locating Pins - Small Head, Round Tapered - Threaded
MISUMI
Large Head, Tapered, with the configurable dimension for each part. The tolerances on both ends and the tapered dimensions are also configurable.
Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Threaded
MISUMI
- Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Threaded from MISUMI.
- Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Air Vent, Threaded
MISUMI
Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
Days to Ship: 3 Day(s) or more -
MISUMI
Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Small Flat Head (D,P Tolerance Selectable-Tapped)
MISUMI
Small Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
- Volume Discount
Days to Ship: 3 Day(s) or more -
Height Adjusting Pins - Press Fit
MISUMI
- Height Adjusting Pins - Press Fit from MISUMI.
- Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Hard Chrome Plating products are not available in Precision Grade Tolerance.- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit)
MISUMI
Small Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
Days to Ship: 3 Day(s) or more -
Locating Pins - Straight, Tapered (Press Fit)
MISUMI
- Locating Pins - Large Head, Tapered (Threaded) from MISUMI.
- Large Head, Tapered, Press Fit + Lock Nut Shape. Improved maintainability compared to Press Fit Type.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole sometimes not available for SUS304.
- Provided 2 options of alteration, Wrench Hole Machining (LAC), or Wrench Flats (SC).Days to Ship: 3 Day(s) or more -
Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Tapped)
MISUMI
[Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a female thread.
- Volume Discount
Days to Ship: 3 Day(s) or more -
Locating Pins for Grippers - Stepped
MISUMI
[Features]Positioning pin stepped type used for mounting an opening / closing chuck.
Days to Ship: 3 Day(s) or more -
Locating Pins for Grippers - Counterbored
MISUMI
[Features]Positioning pin counterbore type used for mounting an opening / closing chuck.
Days to Ship: 3 Day(s) or more -
Locating Pins for Grippers - Tapped
MISUMI
[Features]Positioning pin female thread type used for mounting an opening / closing chuck.
Days to Ship: 3 Day(s) or more -
One-Touch Flex Locator, Cam Handle Type (Pin)
IMAO CORPORATION
- ONE-TOUCH FLEX LOCATOR CLAMPERS (Cam Handle) from IMAO CORPORATION.
- The shape of tips can be selected 2 types, Tapered pin (CP731-LC), Straight pin (CP731-SC).
- The body of ONE-TOUCH FLEX LOCATOR CLAMPERS is made of SCM440 steel Nitrocarburized.
- The Cam Handle of ONE-TOUCH FLEX LOCATOR CLAMPERS is made of SCM440 steel, Black oxide finished, Quenched & tempered.
- The ball of ONE-TOUCH FLEX LOCATOR CLAMPERS is made of SUJ2 steel.
- Clamping and unclamping by cam handle.Standard Price: MYR 1,479.72- Days to Ship: 9 Day(s)
![Locating Pin - Straight, Configurable[RoHS Comliant]](http://content.misumi-ec.com/image/upload/t_product_view_b/t_misumi_wm/v1/p/jp/product/series/110310866249/110310866249_001_20230913143356.jpg?$product_view_b$)
![[Clean & Pack] Locating Pin - Large Head, Tapered, Taper Angle Configurable, Tolerance Selectable, Press Fit](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664919/110310664919_001_20230911105917.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Basic Shape |
| Environmentally friendly |
| Characteristics/Applications |
| Insertion Guide Tip Shape |
| Insertion Guide Tip Type |
| Insertion Guide Specifications |
| Mounting Side Shape |
| Surface Treatment |
| Heat Treatment |
| Material |
| Insertion Guide Outer Dia. D1(mm) |
| Insertion Guide Tolerance |
| Mounting Side Outer Dia. d(mm) |
| Mounting Side Tolerance |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | IMAO CORPORATION | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | IMAO CORPORATION |
| Product Series | Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit | Locating Pins - High Hardness Stainless Steel, Straight (Tapped) | Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit) | Locating Pins - High Hardness Stainless Steel, Straight (Press Fit) | Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Tapped | Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped) | Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit) | Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded) | Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Threaded | Locating Pins - Small Flat Head (D,P Tolerance Selectable-Tapped) | Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit) | Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Tapped) | ||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship | 1 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 4 Day(s) | 3 Day(s) or more | 1 Day(s) or more | 3 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 8 Day(s) | 9 Day(s) or more | 3 Day(s) or more | 2 Day(s) or more | 3 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 8 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 9 Day(s) |
| Basic Shape | Straight / Air Vent | Straight / Air Vent | Large Head | Large Head | Small Head | Straight / Air Vent | Large Head | Straight / Air Vent | Small Head | Straight / Air Vent | Large Head | Large Head | Large Head | Straight / Air Vent | Straight / Air Vent | Flanged | Large Head | Large Head | Straight / Air Vent | Straight / Air Vent | Straight / Air Vent | Large Head | Small Head | Shouldered | Shouldered | Flanged | Large Head | Large Head | Large Head | Large Head | Large Head | Small Head | Small Head | Small Head | Straight / Air Vent | Shouldered | Large Head | Screw Mounted | Screw Mounted | Flanged |
| Environmentally friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Characteristics/Applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Clean Washed | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Insertion Guide Tip Shape | Round | Round | Round / Diamond | Diamond / Square Head | Round / Diamond | Round | Round / Diamond | Round | Round / Diamond | Round | Round / Diamond | Round | Round | Round | Round | Round | Round / Diamond | Round | Round | Round | Round | Round / Diamond | Round / Diamond | Round | Round | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round | Round | Round | Round / Diamond | Round | Round | Round | Round | Round | Round | Round |
| Insertion Guide Tip Type | - | Tapered / Spherical / Flat | Spherical | Spherical | Tapered | Tapered | Tapered | Tapered / Spherical | Spherical | Spherical | Tapered | Flat | Flat | Spherical | Spherical | Tapered | Tapered | Flat | Tapered | Tapered | Tapered / Spherical | Spherical | Spherical | Tapered | Tapered | Tapered | Flat | Tapered | Spherical | Flat | Flat | Flat | Tapered | Flat | Tapered | Tapered | Flat | Flat | Flat | Tapered |
| Insertion Guide Specifications | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | With Flathead Slot | Not Provided | Not Provided | Not Provided | Not Provided | With Hex Socket | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | With Screw Mount Hole | Not Provided | Not Provided |
| Mounting Side Shape | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Tapped | Tapped | Straight (Press-Fit) | Tapped | Straight (Press-Fit) | Tapped | Tapped | Straight (Press-Fit) | Threaded | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Threaded | Tapped | Straight (Press-Fit) | Tapped | Tapped | Straight (Press-Fit) | Threaded | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Threaded | Threaded | Tapped | Tapped | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Tapped | Straight (Press-Fit) | Straight (Press-Fit) | Tapped | Straight (Press-Fit) |
| Surface Treatment | Not Provided | Not Provided | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Electroless Nickel Plating | Not Provided | Not Provided / Hard Chrome Plating | Black Oxide | Not Provided / Hard Chrome Plating | Not Provided / Electroless Nickel Plating | Not Provided | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Black Oxide / Electroless Nickel Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Electroless Nickel Plating | Not Provided / Electroless Nickel Plating | Not Provided / Electroless Nickel Plating | Isonite Treatment |
| Heat Treatment | Directly Quenching | Not Provided | Not Provided / Directly Quenching | Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided | Not Provided / Directly Quenching | Not Provided | Not Provided | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Carburized | Not Provided | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided | Not Provided | Not Provided | Not Provided |
| Material | - | Stainless Steel | Steel / Stainless Steel | - | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Resin | Steel / Stainless Steel | Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel |
| Insertion Guide Outer Dia. D1(mm) | 3 ～ 10 | - | - | 3.5 ～ 30 | 3 ～ 20 | 5 ～ 12 | - | - | 1 ～ 20 | 5 ～ 10 | - | - | 3 ～ 15 | - | 1 ～ 10 | 16 | 1 ～ 30 | 5 ～ 15 | 5 ～ 12 | 5 ～ 10 | - | - | 4 ～ 20 | 1 ～ 20 | 2 ～ 20 | 6 ～ 20 | 3 ～ 40 | - | - | - | - | 4 ～ 20 | 1 ～ 20 | 1.5 ～ 20 | 1 ～ 10 | 4 ～ 20 | 6 ～ 32 | - | - | 18 ～ 28 |
| Insertion Guide Tolerance | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 | g6 |
| Mounting Side Outer Dia. d(mm) | 3 ～ 8 | 0.5 ～ 10 | 1 ～ 20 | 3 ～ 20 | 5 ～ 20 | 5 ～ 12 | 1 ～ 20 | 6 ～ 10 | 2 ～ 20 | 5 ～ 10 | 5 ～ 20T | 1 ～ 20 | - | - | 1 ～ 10 | 32 | 1 ～ 20 | - | 3 ～ 6 | 5 ～ 10 | 3 ～ 10 | 5 ～ 20T | 6 ～ 20 | 2 ～ 20 | 3 ～ 20 | 10 ～ 20 | - | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 6 ～ 20T | 6 ～ 20 | 2 ～ 20 | 2 ～ 20 | 1 ～ 10 | 6 ～ 20 | 5 ～ 12 | 10 ～ 32 | 10 ～ 32 | 39 ～ 56 |
| Mounting Side Tolerance | - | g6 | 0/-0.005 ～ h7 | - | g6 ～ h7 | g6 | 0/-0.005 ～ h7 | g6 | 0/-0.005 ～ h7 | g6 | g6 ～ h7 | 0/-0.005 ～ h7 | - | g6 | g6 | - | 0/-0.005 ～ h7 | - | g6 | g6 | g6 | g6 ～ h7 | g6 ～ h7 | 0/-0.005 ～ h7 | 0/-0.005 ～ h7 | 0/-0.005 | g6 | 0/-0.005 ～ h7 | 0/-0.005 ～ h7 | 0/-0.005 ～ h7 | g6 ～ h7 | g6 ～ h7 | 0/-0.005 ～ h7 | 0/-0.005 ～ h7 | g6 | g6 ～ h7 | m6 | g6 | g6 | - |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![Locating Pin - Straight, Configurable[RoHS Comliant]](http://content.misumi-ec.com/image/upload/t_product_view_c/t_misumi_wm/v1/p/jp/product/series/110310866249/110310866249_001_20230913143356.jpg?$product_view_c$)
![[Clean & Pack] Locating Pin - Large Head, Tapered, Taper Angle Configurable, Tolerance Selectable, Press Fit](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310664919/110310664919_001_20230911105917.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Environmentally friendly
-
Characteristics/Applications
-
Insertion Guide Tip Shape
-
Round -
Diamond -
Square Head -
Triangle
-
-
Insertion Guide Tip Type
-
Tapered -
Round Tapered -
Taper R -
R -
Spherical -
Flat -
Ball End -
Bullet Nose
-
-
Insertion Guide Specifications
-
Not Provided -
With Screw Mount Hole -
With Hex Socket -
With Flathead Slot -
Tapped
-
-
Mounting Side Shape
-
Straight (Press-Fit) -
Tapped -
Threaded -
Circumference Groove -
Notch -
Set Screw Flat
-
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
- Buffed
- Hard Chrome Plating + Buffed
- Anodize
- Polishing
- Isonite Treatment
-
Heat Treatment
- Not Provided
- Carburized
- Directly Quenching
-
Material
- Steel
- Stainless Steel
- Resin
- Aluminum
-
Insertion Guide Outer Dia. D1(mm)
-
Insertion Guide Tolerance
-
Mounting Side Outer Dia. d(mm)
-
Mounting Side Tolerance
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy