(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Flexible Shaft Couplings（Allowable Torque Range：50.01~100.00）
Take advantage of the convenience of FREE SHIPPING and NO MINIMUM ORDER on couplings. If you have any doubts or require assistance in choosing the right product, our experts are readily available to provide.
Type
-
Slit -
Disc -
Oldham -
Jaw -
Bellows -
Others -
Vibration Damping Rubber Type
-
Oldham Couplings - Large Shaft Diameter, Set Screw / Clamping / Spacers
MISUMI
Large tolerance for lateral and angular misalignments covers up to Ø38 max. shafts.
Days to Ship: 6 Day(s) or more -
MIKI PULLEY
· SFC Model for Servo Coupling
· Application: Servo Motor / Stepping Motor / Encoder.
· Body material: Using aluminum clad in a clear anodized finish.
· Disc members are made of 304 stainless steels.
· Single and double element configurations are available.
· Bores can be configured with clamp, taper-lock, or keyed styles.
· Maximum Rotational Speed Range: 4001 ~ 10000 (r/min).
· Maximum allowable torque: 250 Nm.
· Bore size range: 3 mm to 45mm.
· Backlash: Zero.
· Operating Temperature Range: -30 to 100 °C
· Couplings are precisely assembled using high strength, corrosion resistant fasteners.Standard Price: MYR 866.18- Days to Ship: 5 Day(s) or more -
![Jaw-Shaped Coupling - Clamping Type - [SJC, SJCA, and SJCB]](//my.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005341064_001.jpg?$product_view_b$)
Jaw-Shaped Coupling - Clamping Type - [SJC, SJCA, and SJCB]
SUNGIL
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.
- CAD ：
- 2D
Standard Price: MYR 198.41- Days to Ship: 8 Day(s) or more -
MITSUBOSHI BELTING
● Compact with strong transmission torque for various applications.
● Easy to install and maintenance-free.
● Polyurethane elastic body with superior oil- and abrasion-resistance is also provided as standard.Standard Price: MYR 448.91- Days to Ship: 10 Day(s) or more -
XBS/XBSS Flexible Coupling Single Disk Type
NABEYA BI-TECH
High torque, high torsional rigidity, and high responsiveness. Backlash "0"
[Features]
· Hex socket head cap screws included with all products.
· Appropriate shaft diameter recommended dimensional tolerance is h6 and h7.
· When attaching to a D cut shaft, pay attention to the position of the D cut surface of the shaft.Standard Price: MYR 693.14- Days to Ship: 6 Day(s) or more -
MIKI PULLEY
Element hardness 97JIS A used, designed to use preliminary compression with no backlash. Supports a wide range of applications, from simple servo to general purpose motor with high torque.
[Features]
· Polyurethane elastomer used for element. So, the transmission torque is more than twice that of conventional jaw coupling.
· Design to distribute pre-compression, and so can be used with no backlash. (ALS-Y/R type)
· Power transmission through polyurethane elastomer with rubber elastic force. It has excellent vibration and impact absorption.- CAD ：
- 2D
Standard Price: MYR 253.78- Days to Ship: 23 Day(s) or more -
MJT Flexible Coupling Disk Type
NABEYA BI-TECH
High torque, vibration absorption.
[Features]
· Joyped flexible coupling.
· The tight fit allows transmission of zero backlash at low torque.
· Easy fit has easy assembly / disassembly of hub.
· Excellent flexibility.
· In addition to eccentricity and angle deviation, also absorbs torsional vibration.
· Electrically insulated.
· 4 types of sleeve hardness.
· Select according to usage conditions, such as torque misalignment.Standard Price: MYR 263.22- Days to Ship: 5 Day(s) or more -
![Jaw-Shaped Coupling - Clamping Type - [SJCM]](//my.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005341075.jpg?$product_view_b$)
Jaw-Shaped Coupling - Clamping Type - [SJCM]
SUNGIL
Simple structure comprising of two hubs and one insert, with the insert relieving shock when the inertial load starts and stops. Easy installation and removal type product. SUNGIL The company is a Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.
- CAD ：
- 2D
Standard Price: MYR 221.72- Days to Ship: 4 Day(s) or more -
Disc Couplings - High Rigidity (O.D. 65), Keywayed Bore / Clamping, for Servo Motors
MISUMI
· Disc Couplings - High-Rigidity Disc
· Type for Coupling: CPSHC65, CPSHCK, CPSHCK, CPSWC, CPSWCK and CPSWWK.
· Allowable Torque Range : 50.01~100.00 [N.m].
· Maximum Rotational Speed Range: 4001 ~ 10000 (r/min).
· Maximum Rotational Speed: 8000 (r/min).
· Allowable Angular Misalignment: 0.6 degree.
· Disc Type: Single Disc and Double Discs.
· Shaft Fastening Method: Lock bolt clamp and screw type.
· Body material: 1045 Carbon Steel or Equivalent.
· Disc material: 301 Stainless Steel.
· Disc Couplings Application: For Servo Motors.
· Single Disc Type cannot tolerate lateral misalignment.Days to Ship: 4 Day(s) or more -
MOR Flexible Coupling - Oldham Type
NABEYA BI-TECH
[Features]
· Oldham type flexible coupling.
· Due to hub and spacer slip, large eccentricity / deflection angles are allowed.
· Eccentric reaction force generated by misalignment is small, reducing the burden on the shaft.
· Easy to assemble with a simple structureStandard Price: MYR 195.67- Days to Ship: 5 Day(s) or more -
Disc-Shaped Coupling - Clamping Type (Single Disc)
SUNGIL
Structure that adjusts axis misalignment by deflection of a thin metal disc. Large torque transmission, even at high-speeds. Simple structure that is easy to remove. Clamping type product. SUNGIL The company is a Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.
- CAD ：
- 3D
Standard Price: MYR 466.82- Days to Ship: 9 Day(s) or more -
NABEYA BI-TECH
Flexible shaft coupling that absorbs shock, vibration, and misalignment in four directions: circumferential direction, eccentricity, deflection angle, and end play. Can be used as is, instead of the conventional shaft fitting, without complete design change of equipment. No need for lubrication, sleeve has a long life. Maintenance-free.
Standard Price: MYR 452.77- Days to Ship: 8 Day(s) or more -
Oldham Couplings - High Rigidity Large Shaft Diameter, Set Screw / Clamping
MISUMI
All-metal Oldham coupling
· Stainless steel hub and aluminum bronze slider combination
· Ultra-high viscosity grease is filled in the minimum gap of the slider to prevent seizure and zero backlash measures
· 4 times the permissible torque shock Will not be damaged by torque (FSPJU)Days to Ship: 8 Day(s) or more -
MOM Flexible Coupling - Oldham Type
NABEYA BI-TECH
[Features]
· Oldham type flexible coupling.
· FCD400 used in spacer.
· Ideal for low speed / high torque specifications.
· Grease applied between hub and spacer to prevent burn-in.
· Due to hub and spacer slip, large eccentricity / deflection angles are allowed.
· The protrusion (resin pin) provided on the spacer allows the angle of deviation without difficulty.
· Long-term maintenance-free.
· Grease accumulated in the grease hole gradually leaks during operation, to maintain long-term lubrication performance.Standard Price: MYR 201.61- Days to Ship: 8 Day(s) or more -
Disc Coupling Clamping Type (Double Disc) SDW
SUNGIL
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.
- CAD ：
- 3D
Standard Price: MYR 560.16- Days to Ship: 9 Day(s) or more -
MIKI PULLEY
Using carbon steel for the main body material, with very precise adjustment and high rigidity.
[Features]
· Torsional rigidity is extremely high, accurate shaft rotation, super precision control is possible.
· Since all power transmission is transmitted by friction coupling, there is no backlash.
· SFS-SS/ DS type is shipped from the factory as an assembled finished product.- CAD ：
- 2D
Standard Price: MYR 1,014.22- Days to Ship: 5 Day(s) or more -
XBW/XBWS Flexible Coupling - Disk Type
NABEYA BI-TECH
High torque, high torsional rigidity, and high responsiveness. Backlash "0"
Standard Price: MYR 800.08- Days to Ship: 6 Day(s) or more -
XHW/XHW-L Flexible Coupling - Disk Type
NABEYA BI-TECH
Type: Disc type
· Main body material: A2017
· Class coupling: body
· Disk part material: SUS304
· Structure: Clamping typeStandard Price: MYR 1,004.03- Days to Ship: 7 Day(s) or more -
XHS Flexible Coupling Single Disc Type
NABEYA BI-TECH
Type: Disc type
· Main body material: A2017
· Class coupling: body
· Disk part material: SUS304
· Structure: Clamping typeStandard Price: MYR 802.81- Days to Ship: 6 Day(s) or more -
High Torque Disc Type Coupling (SHD Series)
SUNGIL
[Features]
・Application of newly developed high-performance disk file format
・High torsional stiffness
・Compact design
・1/10 taper bushing
・High permissible torque
・Suitable for low moment of inertia and high rotation speed
•Related Keywords: Sungil Machinery, Standard Coupling, Coupling / Shaft JointStandard Price: MYR 455.14- Days to Ship: 9 Day(s) or more -
Disc Couplings - High Rigidity (O.D. 87), Keywayed Bore / Clamping
MISUMI
· CPSWC/ CPSWWK/ CPSHWK Coupling High Rigid Diaphragm Type- High Rigidity.
· CPSWC is a double diaphragm type and uses Clamp locking type.
· CPSWWK is a double diaphragm type with keyway holes on both sides.
· CPSHWK is a single diaphragm type with keyway holes on both sides.
· CPSWC/ CPSWWK/ CPSHWK main body material: Steel S45C.
· CPSWC/ CPSWWK/ CPSHWK diaphragm material: stainless steel SUS301CSP.
· Application : Servo Motor/ Stepper Motor.
· Maximum speed range: 4001 ～ 10000 (r/min)
· Allowable Angular misalignment 0.6 degree.
· Shaft Fastening Method: Fastening bolts, set screws.Days to Ship: 4 Day(s) or more -
Jaw Couplings - Set Screw / Clamping
MISUMI
· Zero backlash
· Vibration & sound absorption
· Cushion has a pipe shape with great flexibility and long life
· Cushion material has large and small torsional rigidity
· A small selection is possible
· Hub material is aluminum die-cast, small moment of inertiaDays to Ship: 8 Day(s) or more -
OLDHAM Type Coupling (SOH Series)
SUNGIL
[Features]
・Electrical insulation effect, non-magnetic
・Absorption of excellent eccentricity and declination (slip phenomenon of middle disc and rounding effect of hub)
・Easy to assemble and replace
・ Minimization of axial load during unalignment
・Free flow, low bearing load
•Related Keywords: Sungil Machinery, Standard Coupling, Coupling / Shaft JointStandard Price: MYR 525.15- Days to Ship: 4 Day(s) or more -
MIKI PULLEY
· ALS-Y models High performance STARFLEX PULLEY MIKI.
· Shaft Tightening Method: Set Screw Type
· Application: Encoder, Stepping Motor.
· Hub material: Aluminum Alloy.
· Spacer Element material: Polyurethane elastomer.
· Accessories: Hexagon head set screw material: Alloy steel use Surface finishing is Black coating.
· Nominal torque: : 1.2 to 310 [N.m].
· Operating Temperature Range: -30 to 80 °C
· These are JIS A tight-fit models that have a shore hardness of 90 and are equipped with a good balance of torque transmission performance, flexibility, and responsiveness.- CAD ：
- 2D
Standard Price: MYR 70.74- Days to Ship: 23 Day(s) or more -
KAYSEVEN
· K-7 coupling MD series - Oldham Type.
· MD series Oldham Couplings structure Consists of three parts :2 hubs and 1 torque disc.
· Application: Robot, Various pumps, Blower, Printing machine, NC-MC machine tool and Conveyor.
· As K-7 standard specifications, 12 MD types from MD-35 to MD-160M are available.
· MD series Body material is aluminum alloy.
· Torque disc material: Polyacetal resin.
· Torque discs are made of resin and do not need to be lubricated.
· Operating environment Temperature Range: -40 to 85 °C
· Assembly and replacement of intermediate torque transmission members are easy.Standard Price: MYR 218.52 Days to Ship: 6 Day(s) or more -
![Jaw Coupling -Set Screw Type- [SJC-14-GR]](//my.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005200844.jpg?$product_view_b$)
Jaw Coupling -Set Screw Type- [SJC-14-GR]
SUNGIL
Jaw type coupling with excellent backlash durability and high torsional rigidity.
[Features]
·No maintenance, no lubrication, elastic spider is Pitload's shock-reducing shaft coupling.
·Same forward/reverse rotation characteristics, good oil resistance and electrical insulation.
·Balancing is optimized by machining the inner diameter of the hub.
[Applications]
·Ideal for transmission equipment, position control/positioning tables, robot systems, medical equipment, and servo motors.Standard Price: MYR 205.92 Days to Ship: 10 Day(s) or more -
Couplicon Bellows Flexible Coupling MKM
NABEYA BI-TECH
High torque, high torsional rigidity, and high responsiveness. Backlash "0"
Standard Price: MYR 2,540.46- Days to Ship: 8 Day(s) or more -
Super zero Oldham coupling series CCZ type aluminum alloy products
NIHON MINIATURE
Clamp type, aluminum made Oldham coupling. Prevent slippage by tightening the entire shaft.
[Features]
· Super zero Oldham coupling achieves zero backlash, with improved machining accuracy
· Stronger and more compact design, that can now be used with high precision equipment impossible until now.
· Stainless steel series added, becoming 4 series, with further improvements.
· Materials used are, engineering plastic for spacer, and stainless steel SUS303 for hubs, aluminum series uses aluminum alloy (alumite surface treatment).
· Easy to handle coupling, with low moment of inertia, large swing rigidity, good electrical insulation, and maintenance-free, easy assembly.
· Two types of super zero Oldham coupling, with set screw or collet shaft fixing methods both available, that can be freely combined.
· Stainless steel has no. 4 model number, and the aluminum series has no. 10 model number.
· Stocking stainless steel series from ø4 to ø28, aluminum series from ø3 to ø40 in millimeter and inch system of inner diameter finish.- CAD ：
- 2D
Standard Price: MYR 691.99 Days to Ship: 6 Day(s) or more -
Precision Shaft Fitting, Leaf Spring Type TCD-B Series
SAKAI MANUFACTURING
Compact, low price type
[Features]
· Torque transmission capability has been improved with unique leaf spring.
· Effective for downsizing and cost reduction.Standard Price: MYR 656.30- Days to Ship: 15 Day(s) or more -
Disc-Shaped Coupling, Set Screw Type (Single Disc)
SUNGIL
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.
Standard Price: MYR 630.17- Days to Ship: 4 Day(s) or more -
Disc Couplings - High Rigidity (O.D. 65), Keyless Clamping, for Servo Motors
MISUMI
A highly rigid flexible coupling by devising the disc fastening part.
[Features]
· Standardized 4 model 45 sizes from shaft diameter φ12 (diameter 12 mm) to φ60 (diameter 60 mm).
· High twist rigidity due to the disc fastening part.
· Allows declination and end play.
· The moment of inertia is smaller than that of other companies.
[Use]
· Machine tools, precision stages, etc.Days to Ship: 4 Day(s) or more -
MIKI PULLEY
Flange type for a wide range of mounting needs.
[Features]
· Compact and high torque.
· Three-layer coil structure achieves, compact size with high torque.- CAD ：
- 2D
Standard Price: MYR 1,234.85 Days to Ship: 8 Day(s) or more -
Double Disc Type Flexible Coupling AHD
ISEL
High rigidity due to ingenuity of the disc fastening part.
[Features]
· 33 standardized shaft diameter sizes ø12 to ø48.
· High rigidity due to ingenuity of the disc fastening part.
· Allows eccentricity, deflection angle and end playStandard Price: MYR 932.20- Days to Ship: 37 Day(s) or more -
MIKI PULLEY
Element hardness 97JIS A used, designed to use preliminary compression with no backlash. Supports a wide range of applications, from simple servo to general purpose motor with high torque.
- CAD ：
- 2D
Standard Price: MYR 253.78- Days to Ship: 23 Day(s) or more -
Precision Axial Fitting-Spring Type, TAS-C Series
SAKAI MANUFACTURING
Single leaf spring type high rigidity, lightweight type
[Features]
· Single leaf spring type in pursuit of improved of accuracy and control responsiveness, through rigid and lightweight body.Standard Price: MYR 602.90 Days to Ship: 48 Day(s) or more -
Disc Coupling Clamping Type (Double Disc) SDA
SUNGIL
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.
- CAD ：
- 3D
Standard Price: MYR 583.53- Days to Ship: 9 Day(s) or more -
MIKI PULLEY
· MM Models - Metal Coil Spring Couplings BAUMANNFLEX.
· MM Models is a standard coupling type.
· Pilot bore/added work ranges: φ3 ～ 35 mm.
· Hub material: steel SUM24L and stainless steel SUS303.
· Metal coil spring material: Piano wire and stainless steel.
· Hexagon head set screw material: Alloy steel for machine structural use Surface finishing: Black coating.
· MM Models Allowable Angular misalignment 3 degree.
· Application: Vacuum equipment, medical equipment, printing machine.
· MM Models Max. nominal torque: 220 [N.m].
· MM Models Operating temperature: BAUMANNFLEX: -30 to 100 °C- CAD ：
- 2D
Standard Price: MYR 1,053.29- Days to Ship: 6 Day(s) or more -
Precision Shaft Fitting, Leaf Spring Type LCD-B Series
SAKAI MANUFACTURING
Streamlined body with low inertia specification
[Features]
· Streamlined body with low inertia specification.
· Excellent flexibility, with high accuracy rotation possible.Standard Price: MYR 707.04 Days to Ship: 4 Day(s) or more -
Precision Axial Fitting Plate-Spring Type, TAD-C Series
SAKAI MANUFACTURING
Lightweight super Duralumin, high rigidity type.
[Features]
· Lightweight super Duralumin, improving torque transmission with high rigidity body, and original leaf spring for both performance up and cost down.Standard Price: MYR 736.71 Days to Ship: 48 Day(s) or more -
MJB Flexible Coupling - Jaw Type (Bushing)
NABEYA BI-TECH
· Various jaw type maximum speed range (r/min): 10,001 to 78,000
· Main body material: S45C
· Class coupling body
· Eccentricity range tolerance (mm): 0.02 to 0.2
· Deviation angle tolerance (deg): 1
· Buffer part material: polyurethane
· Structure: Bushing typeStandard Price: MYR 796.57- Days to Ship: 8 Day(s) or more -
![Disc-Shaped Coupling - Clamping Type (Double Disc) - [SHDW]](//my.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005341086.jpg?$product_view_b$)
Disc-Shaped Coupling - Clamping Type (Double Disc) - [SHDW]
SUNGIL
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.
Standard Price: MYR 641.86- Days to Ship: 10 Day(s) or more -
Disc Coupling Set Screw Type (Double Disc) SHDW
SUNGIL
A disc coupling, clamping type (double disc).
[Features]
·A newly developed high-performance disc. This product is shaped with high torsional rigidity.
·Semi-permanent lifespan with zero backlashes.
·Absorbs misalignments of angles of deflection, eccentricity, and endplay.
·A low moment of inertia for stability even at high RPM.
[Applications]
·Servo motors, stepper motors, precision motors, etc.
·High-precision encoders, dynamometer drivers, high-speed, high-precision position control systems.
·Centrifuges, copiers.Standard Price: MYR 851.96- Days to Ship: 10 Day(s) or more -
MIKI PULLEY
Newly developed multi-layer rubber element achieves high attenuation and low recoil force. Couplings with high damping performance. For servo and stepper motors.
Integrated structure with no backlash that adopts HNBR for the power transmitting element. Damps vibration more quickly than a flexible coupling using metal for the elastic part.
This makes it possible to inhibit resonance, a phenomenon which tends to occur with stepper motors, etc. Helps avoid resonance over a wide range of operating speeds. Provides stable high speed control.
Furthermore, by using a layered rubber element sandwiched between HNBR with different levels of hardness, the shaft reaction force due to misalignment is reduced. The burden on the counter shaft and bearing can be reduced drastically.Standard Price: MYR 557.31 Days to Ship: 9 Day(s) or more -
ADVANCED
· The Strongest Oldham
· Combination of stainless steel hubs and aluminum-bronze slider: All-metal Oldham coupling
· The minimum clearance of the slider part is filled with ultra-high viscosity grease for preventing seizure and achieving zero backlash
· Damage will not occur even with an impact torque that is 4 times greater than the allowable torque (FSPJU)Standard Price: MYR 987.20- Days to Ship: 14 Day(s) or more -
Super zero Oldham couplings series SCZ type stainless steel.
NIHON MINIATURE
Stainless steel hub (boss part), with zero backlash. Stronger and more compact coupling.
[Features]
· Super zero Oldham coupling achieves zero backlash, with improved machining accuracy
· Stronger and more compact design, that can now be used with high precision equipment impossible until now.
· Stainless steel series added, becoming 4 series, with further improvements.
· Materials used are, engineering plastic for spacer, and stainless steel SUS303 for hubs, aluminum series uses aluminum alloy (alumite surface treatment).
· Easy to handle coupling, with low moment of inertia, large swing rigidity, good electrical insulation, and maintenance-free, easy assembly.
· Two types of super zero Oldham coupling, with set screw or collet shaft fixing methods both available, that can be freely combined.
· Stainless steel has no. 4 model number, and the aluminum series has no. 10 model number.
· Stocking stainless steel series from ø4 to ø28, aluminum series from ø3 to ø40 in millimeter and inch system of inner diameter finish.- CAD ：
- 2D
Standard Price: MYR 1,222.31 Days to Ship: 6 Day(s) or more
![Jaw-Shaped Coupling - Clamping Type - [SJC, SJCA, and SJCB]](http://my.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005341064_001.jpg?$product_view_b$)
![Jaw-Shaped Coupling - Clamping Type - [SJCM]](http://my.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005341075.jpg?$product_view_b$)
![Jaw Coupling -Set Screw Type- [SJC-14-GR]](http://my.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005200844.jpg?$product_view_b$)
![Disc-Shaped Coupling - Clamping Type (Double Disc) - [SHDW]](http://my.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005341086.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Shaft Bore Dia. (machined) D1(Ø) |
| Shaft Bore Dia. (machined) D2(Ø) |
| Outer Dia. A(Ø) |
| Overall Length W(mm) |
| Application |
| Allowable Torque Range(N•m) |
| Features |
| Allowable Misalignment |
| Max. Rotational Speed Range(r/min) |
| Body Material |
| Allowable Torque(N•m) |
| Allowable Angular Misalignment(deg) |
| Allowable Lateral Misalignment(mm) |
| Product Category |
| Allowable Lateral Misalignment Range(mm) |
| Max. Rotational Speed(r/min) |
| Buffer Material |
| Disc Material |
| Bellows Material |
| Cleaning Method |
| Characteristics/Applications |
| Environmentally friendly |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MIKI PULLEY | SUNGIL | MITSUBOSHI BELTING | NABEYA BI-TECH | MIKI PULLEY | NABEYA BI-TECH | SUNGIL | MISUMI | NABEYA BI-TECH | SUNGIL | NABEYA BI-TECH | MISUMI | NABEYA BI-TECH | SUNGIL | MIKI PULLEY | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | SUNGIL | MISUMI | MISUMI | SUNGIL | MIKI PULLEY | KAYSEVEN | SUNGIL | NABEYA BI-TECH | NIHON MINIATURE | SAKAI MANUFACTURING | SUNGIL | MISUMI | MIKI PULLEY | ISEL | MIKI PULLEY | SAKAI MANUFACTURING | SUNGIL | MIKI PULLEY | SAKAI MANUFACTURING | SAKAI MANUFACTURING | NABEYA BI-TECH | SUNGIL | SUNGIL | MIKI PULLEY | ADVANCED | NIHON MINIATURE |
| Product Series | Oldham Couplings - Large Shaft Diameter, Set Screw / Clamping / Spacers | Disc Couplings - High Rigidity (O.D. 65), Keywayed Bore / Clamping, for Servo Motors | Oldham Couplings - High Rigidity Large Shaft Diameter, Set Screw / Clamping | Disc Couplings - High Rigidity (O.D. 87), Keywayed Bore / Clamping | Super zero Oldham coupling series CCZ type aluminum alloy products | Disc Couplings - High Rigidity (O.D. 65), Keyless Clamping, for Servo Motors | Super zero Oldham couplings series SCZ type stainless steel. | ||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
| Days to Ship | 6 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 23 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 23 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 15 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 37 Day(s) or more | 23 Day(s) or more | 48 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 48 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 14 Day(s) or more | 6 Day(s) or more |
| Type | Oldham | Disc | Jaw | Oldham | Disc | Jaw | Jaw | Jaw | Disc | Oldham | Disc | Oldham | Oldham | Oldham | Disc | Disc | Disc | Disc | Disc | Disc | Disc | Jaw | Oldham | Jaw | Oldham | Jaw | Bellows | Oldham | Disc | Disc | Disc | Bellows | Disc | Jaw | Disc | Disc | Bellows | Disc | Disc | Jaw | Disc | Disc | Vibration Damping Rubber Type | Oldham | Oldham |
| Shaft Bore Dia. (machined) D1(Ø) | 22 ～ 38 | 12 ～ 35 | 12 ～ 35 | - | 14 ～ 35 | 15 ～ 30 | 15 ～ 38 | 12 ～ 35 | 15 ～ 30 | 10 ～ 25 | 16 ～ 32 | - | 15 ～ 25 | 8 ～ 20 | 16 ～ 32 | 15 ～ 30 | 14 ～ 35 | 14 ～ 42 | 14 ～ 42 | 15 ～ 32 | 20 ～ 35 | 15 ～ 40 | 18 ～ 35 | 19 ～ 35 | - | 12 | 16 ～ 28 | 14 ～ 30 | 14 ～ 25 | 15 ～ 32 | 15 ～ 35 | - | 12 ～ 19 | 15 ～ 30 | 17 ～ 20 | 16 ～ 32 | 14 ～ 28 | 15 ～ 35 | 25 | 10 ～ 38 | 15 ～ 32 | 15 ～ 32 | 8 ～ 28 | 15 ～ 28 | 12 ～ 28 |
| Shaft Bore Dia. (machined) D2(Ø) | 22 ～ 38 | 12 ～ 40 | 12 ～ 35 | - | 14 ～ 35 | 15 ～ 35 | 15 ～ 40 | 12 ～ 35 | 15 ～ 30 | 10 ～ 25 | 16 ～ 32 | - | 15 ～ 25 | 8 ～ 20 | 16 ～ 32 | 15 ～ 35 | 14 ～ 35 | 14 ～ 42 | 14 ～ 42 | 15 ～ 32 | 20 ～ 35 | 15 ～ 40 | 18 ～ 35 | 19 ～ 35 | - | 12 | 20 ～ 30 | 14 ～ 30 | 14 ～ 35 | 15 ～ 32 | 15 ～ 35 | - | 14 ～ 32 | 15 ～ 35 | 19 ～ 35 | 16 ～ 32 | 14 ～ 28 | 15 ～ 35 | 32 | 10 ～ 38 | 15 ～ 32 | 15 ～ 32 | 12 ～ 30 | 15 ～ 28 | 12 ～ 28 |
| Outer Dia. A(Ø) | 70 | 68 ～ 82 | 55 ～ 65 | 100 | 68 ～ 82 | 55 ～ 65 | 55 ～ 80 | 55 ～ 65 | 65 | 38 ～ 55 | 80 | 102 ～ 117 | 45 ～ 55 | 30 ～ 34 | 80 | 82 | 68 ～ 82 | 79 | 79 | 66 | 87 | 55 ～ 95 | 73 | 55 ～ 65 | 90 | 55 | 63 | 60 | 65 | 66 | 65 | 75 | 65 | 55 ～ 65 | 65 | 80 | 55 | 80 | 65 | 55 ～ 65 | 66 | 66 | 56 | 45 ～ 55 | 60 |
| Overall Length W(mm) | 77 | 53.6 ～ 98 | 78 ～ 90 | 115 | 53 ～ 68 | 78 ～ 90 | 78 ～ 114 | 59 ～ 63 | 55.5 ～ 77 | 40 ～ 57 | 66.8 | 90 ～ 102 | 43.6 ～ 57 | 34 ～ 35 | 82.5 | 66 ～ 112.8 | 75 ～ 98 | 97.2 | 63.6 | 56.5 | 94 | 60 ～ 100 | 77 | 78 ～ 90 | 84 | 78 | 77 | 48 | 66 | 56.5 | - | 75 | - | 78 ～ 90 | 54.5 | 98.5 | 100 | 83 | 72 | 78 ～ 90 | 80 | 80 | 60 | 43.6 ～ 57 | 65 |
| Application | Standard | Servo Motor / Stepping Motor / Encoder | Servo Motor | - | Standard / Servo Motor / Stepping Motor | Standard / Servo Motor / Stepping Motor / Encoder | Standard / Servo Motor / Stepping Motor | Servo Motor | Servo Motor | Standard / Stepping Motor | Servo Motor / Stepping Motor | Standard | Standard | Standard | Servo Motor / Stepping Motor | Servo Motor | Standard / Servo Motor / Stepping Motor | Standard / Servo Motor / Stepping Motor | Standard / Servo Motor / Stepping Motor | Servo Motor / Stepping Motor | Servo Motor | Standard | Standard / Stepping Motor | Standard / Servo Motor / Stepping Motor / Encoder | Standard | Servo Motor | Servo Motor / Stepping Motor | Standard | Standard / Servo Motor / Stepping Motor | Servo Motor / Stepping Motor | Servo Motor | Standard / Servo Motor / Stepping Motor | Standard / Servo Motor / Stepping Motor | Standard | Standard / Servo Motor / Stepping Motor | Servo Motor / Stepping Motor | Standard / Servo Motor / Stepping Motor | Standard / Servo Motor / Stepping Motor | Standard / Servo Motor / Stepping Motor | Standard / Servo Motor / Stepping Motor | Servo Motor / Stepping Motor | Servo Motor / Stepping Motor | Servo Motor / Stepping Motor | Standard / Servo Motor | Standard |
| Allowable Torque Range(N•m) | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 | 50.01~100.00 |
| Features | High Torque ～ Low Moment of Inertia | High Accuracy ～ Small | High Torsional Rigidity ～ Vibration Insulation | - | High Torque ～ No Backlash | High Accuracy ～ Vibration Insulation | High Torque ～ Vibration Insulation | High Torsional Rigidity ～ Vibration Insulation | High Torque ～ No Backlash | High Torque | Heat Resistant ～ No Backlash | Vibration Insulation | High Torque ～ High Torsional Rigidity | High Torque ～ High Torsional Rigidity | Heat Resistant ～ No Backlash | High Accuracy ～ Unfinished Shaft Bore | High Torque ～ No Backlash | High Torque ～ No Backlash | High Torque ～ No Backlash | Heat Resistant ～ No Backlash | High Torque ～ No Backlash | High Torque ～ Low Moment of Inertia | No Backlash ～ Vibration Insulation | Low Moment of Inertia ～ Vibration Insulation | Small ～ Vibration Insulation | High Torsional Rigidity ～ Vibration Insulation | High Torque ～ No Backlash | High Torque ～ Small | High Accuracy ～ High Torque | Heat Resistant ～ No Backlash | High Torque ～ No Backlash | High Torque ～ Unfinished Shaft Bore | High Accuracy ～ No Backlash | High Durability ～ Vibration Insulation | High Accuracy ～ Low Moment of Inertia | Heat Resistant ～ No Backlash | High Torque ～ Unfinished Shaft Bore | High Torque ～ Low Moment of Inertia | High Accuracy ～ Low Moment of Inertia | High Torque ～ Vibration Insulation | Heat Resistant ～ No Backlash | Heat Resistant ～ No Backlash | High Torque ～ Vibration Insulation | High Torsional Rigidity | High Torque ～ Small |
| Allowable Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Not Provided | Angular Misalignment / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | - | - | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Not Provided / Angular Misalignment / Eccentricity / Axial Misalignment | Not Provided | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | - | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity |
| Max. Rotational Speed Range(r/min) | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 ～ 10001~78000 | 2001~4000 | 4001~10000 | 10001~78000 | 4001~10000 | 4001~10000 | 4001~10000 | 1001~2000 | 4001~10000 | 4001~10000 ～ 10001~78000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 2001~4000 ～ 10001~78000 | 2001~4000 | 4001~10000 | 2001~4000 | 4001~10000 | 4001~10000 | 10001~78000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 10001~78000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 | 4001~10000 |
| Body Material | Aluminum | Aluminum | Aluminum | - | Aluminum | Aluminum | Aluminum | Aluminum | Steel | Aluminum | Aluminum | - | Stainless Steel | Steel | Aluminum | Steel | Aluminum | Aluminum | Aluminum | Aluminum / Aluminum Alloy | Steel | Aluminum | Aluminum / Aluminum Alloy | Aluminum | Steel | Aluminum | - | Aluminum | Steel | Aluminum | Steel | Steel | Steel | Aluminum | Aluminum | Aluminum | Stainless Steel / Steel | Steel | Aluminum | Steel | Aluminum / Aluminum Alloy | Aluminum | Aluminum | Stainless Steel | Stainless Steel |
| Allowable Torque(N•m) | 72 ～ 80 | 51 ～ 100 | 60 ～ 95 | 53.9 ～ 78.5 | 60 ～ 80 | 51 ～ 96 | 60 ～ 95 | 60 ～ 95 | 60 | 56 ～ 90 | 75 | 52 ～ 84 | 60 ～ 90 | 52 ～ 70 | 75 | 80 | 60 ～ 80 | 100 | 100 | 60 | 100 | 80 | 65 | 51 ～ 96 | 95 | 60 | 60 | 98.067 | 80 | 60 | 60 | 90 | 60 | 51 ～ 96 | 80 | 75 | 90 | 80 | 80 | 70 ～ 92 | 60 | 60 | 60 | 60 ～ 90 | 98.067 |
| Allowable Angular Misalignment(deg) | 2 | 1 ～ 2 | 1 | - | 1 | 1 | 1 | 1 | 0.6 | 3 | 2 | 1 | 1 | 2 | 2 | 1 ～ 2 | 2 | 2 | 1 | 0.7 | 0.6 | 1 ～ 2 | 2 | 1 | - | 1 | 2 | 1 | 1 | 0.7 | 0.6 | 3 | 0.6 | 1 | 1 | 2 | 3 | 1 | 1 | 1 | 0.1 ～ 1 | 1 | 1.5 | 0.2 ～ 0.5 | 1 |
| Allowable Lateral Misalignment(mm) | 2 | 0.02 ～ 0.63 | 0.1 ～ 0.15 | - | 0.02 | 0.1 | - | 0.1 ～ 0.15 | 0.2 | 2.5 ～ 4 | 0 | 0.38 ～ 0.51 | 1 ～ 1.2 | 0.6 ～ 0.7 | 0.4 | 0.3 ～ 0.5 | 0.3 ～ 0.5 | 0.5 | 0.02 | 0 ～ 0.02 | 0.2 | 0.1 ～ 0.4 | 3.5 | 0.15 | - | 0.15 | 0.2 | 2.5 | 0.2 | 0 | 0.2 | 0.9 | 0.2 | 0.22 ～ 0.25 | 0.02 | 0.5 | 0.9 ～ 1 | 0.33 | 0.31 | 0.15 ～ 0.2 | 0.2 ～ 0.3 | 0.3 | 0.2 | 1 ～ 1.2 | 2 |
| Product Category | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body |
| Allowable Lateral Misalignment Range(mm) | 1.1~3.0 | 0.02~0.2 ～ 0.41~1.0 | 0.02~0.2 | - | 0.02~0.2 | 0.02~0.2 | 0.02~0.2 | 0.02~0.2 | 0.02~0.2 | 1.1~3.0 ～ 3.1~5.0 | - | 0.21~0.40 ～ 0.41~1.0 | 0.41~1.0 ～ 1.1~3.0 | 0.41~1.0 | 0.21~0.40 ～ 0.41~1.0 | 0.21~0.40 ～ 0.41~1.0 | 0.21~0.40 ～ 0.41~1.0 | 0.41~1.0 | 0.02~0.2 | - | 0.02~0.2 | 0.02~0.2 ～ 0.21~0.40 | 3.1~5.0 | 0.02~0.2 | - | 0.02~0.2 | 0.02~0.2 | 1.1~3.0 | 0.02~0.2 | - | 0.02~0.2 | 0.41~1.0 | 0.02~0.2 | 0.21~0.40 | 0.02~0.2 | 0.41~1.0 | 0.41~1.0 | 0.21~0.40 | 0.21~0.40 | 0.02~0.2 | 0.21~0.40 | 0.21~0.40 | 0.02~0.2 | 0.41~1.0 ～ 1.1~3.0 | 1.1~3.0 |
| Max. Rotational Speed(r/min) | 8000 | 10000 | 5500 ～ 6500 | 5500 | 7000 ～ 9000 | 5900 ～ 8700 | 7000 ～ 11000 | 3500 ～ 4000 | 8000 | 11000 ～ 16000 | 6000 | 5250 ～ 6000 | 5000 ～ 10000 | 2000 | 6000 | 5000 ～ 17000 | 7000 ～ 9000 | 7900 | 7900 | 6500 ～ 7500 | 6000 | 4000 ～ 11000 | 3000 | 5900 ～ 7400 | 4000 | 7500 | 8000 | 15000 | 10000 | 7000 | 8000 | 6000 | 8000 | 5900 ～ 8700 | 10000 | 6000 | 6000 | 10000 | 10000 | 14000 ～ 17000 | 7000 ～ 7500 | 7000 | 10000 | 5000 ～ 10000 | 5000 |
| Buffer Material | Polyacetal | - | Polyacetal / Polyurethane | Carbon Reinforced Resin / Polyurethane | - | Polyurethane | Polyurethane | Polyurethane | - | Polyacetal | Aluminum Bronze / Others | - | Aluminum Bronze | - | Aluminum Bronze / Others | - | - | - | - | Aluminum Bronze | - | Polyurethane / Nylon | Polyacetal | Polyurethane | Polyacetal | Polyacetal | - | Others | - | Aluminum Bronze | - | - | - | Polyurethane | - | Aluminum Bronze / Others | - | - | - | Polyurethane | Aluminum Bronze | Aluminum Bronze | Others | Aluminum Bronze | Others |
| Disc Material | - | Stainless Steel | Aluminum | - | Stainless Steel | - | - | - | Stainless Steel | - | Stainless Steel | - | - | - | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | - | - | - | - | Aluminum | - | - | Stainless Steel | Stainless Steel | Stainless Steel | - | Stainless Steel | - | Stainless Steel | Stainless Steel | - | Stainless Steel | Stainless Steel | - | Stainless Steel | Stainless Steel | - | - | - |
| Bellows Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Characteristics/Applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Environmentally friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![Jaw-Shaped Coupling - Clamping Type - [SJC, SJCA, and SJCB]](http://my.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005341064_001.jpg?$product_view_c$)
![Jaw-Shaped Coupling - Clamping Type - [SJCM]](http://my.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005341075.jpg?$product_view_c$)
![Jaw Coupling -Set Screw Type- [SJC-14-GR]](http://my.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005200844.jpg?$product_view_c$)
![Disc-Shaped Coupling - Clamping Type (Double Disc) - [SHDW]](http://my.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005341086.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Shaft Bore Dia. (machined) D1(Ø)
-
Shaft Bore Dia. (machined) D2(Ø)
-
Outer Dia. A(Ø)
- 6
- 6.4
- 8
- 9
- 9.5
- 10
- 12
- 12.7
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.1
- 16.5
- 16.6
- 16.8
- 17
- 17.5
- 18
- 19
- 19.1
- 19.5
- 20
- 21
- 22
- 22.2
- 22.5
- 24
- 24.5
- 25
- 25.4
- 25.5
- 26
- 26.2
- 26.6
- 27
- 27.3
- 28
- 28.6
- 29
- 30
- 31.7
- 31.8
- 32
- 33
- 33.3
- 34
- 34.4
- 35
- 36
- 38
- 38.1
- 39
- 39.5
- 40
- 41.3
- 42
- 42.5
- 43
- 44
- 44.5
- 45
- 46
- 47
- 48
- 50
- 53
- 53.6
- 54
- 54.5
- 55
- 56
- 57
- 58
- 60
- 63
- 64
- 65
- 66
- 68
- 69
- 69.9
- 70
- 73
- 75
- 79
- 79.5
- 80
- 81
- 82
- 83
- 85
- 87
- 88
- 90
- 93
- 94
- 94.5
- 95
- 99
- 100
- 102
- 104
- 104.5
- 105
- 112
- 117
- 118
- 120
- 125
- 126
- 138
- 140
- 143
- 144
- 150
- 152
- 155
- 160
- 161
- 168
- 170
- 178
- 185
- 190
- 194
- 200
- 210
- 214
- 225
- 246
- 262
- 276
- 308
- 346
-
Overall Length W(mm)
- 5.1
- 7.3
- 8.4
- 9
- 9.4
- 9.6
- 10
- 10.2
- 10.5
- 11.2
- 11.4
- 11.8
- 11.9
- 12
- 12.35
- 12.4
- 12.7
- 13
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.7
- 14.9
- 15
- 15.5
- 15.6
- 15.7
- 15.8
- 15.9
- 16
- 16.2
- 16.5
- 16.6
- 16.7
- 17
- 17.4
- 17.5
- 17.6
- 17.8
- 18
- 18.1
- 18.4
- 18.5
- 18.7
- 18.8
- 19
- 19.1
- 19.2
- 19.35
- 19.4
- 19.6
- 19.7
- 19.8
- 20
- 20.2
- 20.4
- 20.5
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 22
- 22.1
- 22.2
- 22.5
- 22.9
- 23
- 23.05
- 23.1
- 23.15
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 24
- 24.1
- 24.2
- 24.4
- 24.5
- 24.9
- 25
- 25.4
- 25.45
- 25.5
- 25.6
- 25.7
- 25.9
- 26
- 26.2
- 26.5
- 26.6
- 27
- 27.2
- 27.3
- 27.4
- 28
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.8
- 29
- 29.5
- 29.8
- 30
- 30.2
- 30.4
- 30.5
- 31
- 31.2
- 31.4
- 31.5
- 31.6
- 31.7
- 31.8
- 32
- 32.2
- 32.3
- 32.5
- 32.6
- 32.7
- 32.8
- 33
- 33.3
- 33.5
- 33.8
- 34
- 34.1
- 34.3
- 34.4
- 34.5
- 35
- 35.6
- 36
- 36.1
- 36.5
- 36.8
- 37
- 37.2
- 37.4
- 37.8
- 38
- 38.1
- 38.2
- 38.5
- 38.6
- 39
- 39.2
- 39.4
- 39.5
- 39.7
- 40
- 40.5
- 41
- 41.3
- 41.8
- 42
- 42.2
- 43.2
- 43.4
- 43.5
- 43.6
- 44
- 44.2
- 44.5
- 44.7
- 44.8
- 45
- 45.2
- 45.5
- 46
- 46.6
- 47
- 47.6
- 48
- 48.4
- 49
- 49.2
- 49.4
- 50
- 50.2
- 50.6
- 50.8
- 51
- 51.2
- 51.3
- 52
- 52.8
- 53
- 53.4
- 53.6
- 54
- 54.1
- 54.4
- 54.5
- 54.6
- 55
- 55.5
- 56
- 56.2
- 56.5
- 56.6
- 57
- 58
- 58.2
- 58.5
- 58.6
- 59
- 59.7
- 59.8
- 59.9
- 60
- 60.4
- 60.5
- 61
- 61.2
- 62
- 63
- 63.4
- 63.6
- 63.7
- 63.8
- 64
- 64.8
- 65
- 65.6
- 66
- 66.6
- 66.8
- 67
- 67.1
- 67.5
- 68
- 68.3
- 68.5
- 68.6
- 68.7
- 68.8
- 69.5
- 69.6
- 69.8
- 70
- 70.5
- 70.6
- 71
- 71.2
- 72
- 72.4
- 73
- 73.3
- 74
- 74.4
- 74.8
- 75
- 75.6
- 76.2
- 77
- 77.6
- 77.8
- 78
- 78.8
- 79.5
- 79.8
- 80
- 80.8
- 81
- 82
- 82.5
- 82.6
- 83
- 83.6
- 84
- 84.7
- 85
- 85.2
- 85.5
- 85.6
- 86
- 88
- 89.3
- 89.5
- 89.6
- 89.8
- 89.9
- 90
- 90.5
- 90.8
- 91
- 92
- 93.6
- 94
- 95
- 95.6
- 96
- 97
- 97.2
- 98
- 98.5
- 98.6
- 99
- 99.2
- 99.6
- 100
- 100.2
- 101
- 101.6
- 102
- 102.5
- 104
- 104.4
- 105.8
- 106
- 107.6
- 108
- 109
- 110
- 111
- 112.8
- 113
- 114
- 115
- 115.6
- 117.6
- 118
- 118.4
- 118.8
- 119.6
- 120
- 120.8
- 121
- 123.6
- 124
- 125
- 126
- 127
- 129
- 129.6
- 130
- 131
- 136.4
- 137.6
- 138
- 140
- 141
- 144
- 144.2
- 146
- 147
- 150
- 150.6
- 153.0
- 154
- 154.6
- 156.4
- 160
- 164
- 164.6
- 170.6
- 176
- 178.4
- 182.8
- 192.4
- 193
- 200
- 208.8
- 209.2
- 216
- 217
- 218
- 223
- 238
- 241.2
- 249.4
- 260
- 286.8
- 290
- 307.0
- 335
- 337.2
- 377
- 391
- 421
- 607
-
Application
- Standard
- Servo Motor
- Stepping Motor
- Encoder
-
Allowable Torque Range(N•m)
-
Features
-
Allowable Misalignment
-
Not Provided -
Angular Misalignment -
Eccentricity -
Axial Misalignment
-
-
Max. Rotational Speed Range(r/min)
-
Body Material
- Stainless Steel
- Steel
- Aluminum
- Alloy
- Plastic
- Aluminum Alloy
-
Allowable Torque(N•m)
-
Allowable Angular Misalignment(deg)
-
Allowable Lateral Misalignment(mm)
-
Product Category
- Coupling Main Body
- Maintenance Components
-
Allowable Lateral Misalignment Range(mm)
-
Max. Rotational Speed(r/min)
-
Buffer Material
-
Disc Material
-
Bellows Material
-
Cleaning Method
- Degreasing
- Precision Cleaning
-
Characteristics/Applications
-
Environmentally friendly
- RoHS Compliant (10 Substances)
Narrow search by specifying Manufacturer
-
- SUNGIL (13)
- NABEYA BI-TECH (10)
- SAKAI MANUFACTURING (9)
- MIKI PULLEY (8)
- ADVANCED (3)
- NIHON MINIATURE (2)
- ISEL (1)
- KAYSEVEN (1)
- MITSUBOSHI BELTING (1)
- SCH (0)
- KOYO ELECTRONIC (0)
- ORIENTAL MOTOR (0)
- COUP-LINE (0)
- ESCO (0)
- MIGHTY (0)
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
Related Categories to Flexible Shaft Couplings
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy