(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 9/2/2025 to 7:00 (MYT) 10/2/2025. We apologize for the inconvenience.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Conveyer Rollers（Properties：Water Resistance）
Available materials include steel, stainless steel, aluminum, ABS resin and the like, which can be selected according to the application
Plating, alumite and the like can be selected for the roller surface processing
The roller length is available in those that can be selected from fixed lengths and those for which the length can be freely specified in 1 mm increments
| Days to Ship |
|
|---|
-
Roller with Shaft (Stainless Steel)
TRUSCO NAKAYAMA
[Features]
- This is a roller that can be installed as a roller replacement for conveyors of different manufacturers by adjusting the included collar.
The 38 mm roller is for light loads and 60.5 mm for moderate loads, all-stainless steel rollers. Water and chemical resistant.Standard Price: MYR 235.42- Days to Ship: 10 Day(s) or more -
Aluminum Roller (Roller For Conveyor), M Series (RA-5716) Diameter φ57.1 × Width 100 - 800
MAKITECH
φ57 aluminum roller for light loads. Roller strength is higher than the RA-4515. Roller unit of the RA-5716 roller conveyor.
[Features]
• Roller diameter is φ57.1. Minimum roller spacing is P75.
• Standard roller width (nominal) is 100W to 800W at intervals of 50mm.
• Pressed-in bearing and inexpensive type- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Stainless steel roller (conveyor roller) M Series (ARS-6015) diameter φ 60.5 x width100-1000
MAKITECH
Cost effective type φ60 stainless steel roller for moderate to light loads. Roller unit of the ARS-6015 roller conveyor. Widths can be specified in 1 mm increments from 100-1, 000 mm.
[Features]
• • Roller diameter is φ60.5. Minimum roller spacing is P75.
• Standard roller width (nominal) is100W to 800W at intervals of 50mm.
• Configurable size is available.
• Press-in bearing and inexpensive type- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Stainless Steel Roller Curve Conveyor, Diameter ø42.7 × Width 305-690 (NTS Type)
OKURA
[Features]
· Tapered roller conveyor for curves with a roller diameter of ø42.7.
· Conveyor length and roller width within the range of 305 to 790 mm can be specified.Standard Price: MYR 696.48- Days to Ship: 13 Day(s) or more -
Stainless Steel Roller, M Series (RS-1010), Diameter φ 10 × Width 50 - 200
MAKITECH
Ultra-fine φ10 stainless steel roller which employs a standard bearing. Roller unit parts for RS-1010, suitable for small item transport.
[Features]
· The roller diameter is φ10.0. The roller interval is P12.4.
· Standard roller width (nominal) is 50W to 200W in increments of 50mm.
· Standard bearing: high durability.
· Aluminum extrusion- CAD ：
- 2D
Days to Ship: 13 Day(s) or more -
Stainless Steel Roller, S Series (SS-4212), Diameter φ 42.7 × Width 90 - 790
MAKITECH
[Features]
- φ42 stainless steel roller.
Individual roller for SS-4212 moderate load roller conveyor.- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Single Unit Stainless Steel Roller (Roller for Conveyor) Diameter ø38.1 × Width 90 - 690 (QS Type)
OKURA
Stronger version of KS. Transport distance and roller width can be specified within the range of 90-690 mm.
Standard Price: MYR 161.15- Days to Ship: 13 Day(s) or more -
OKURA
⌀50 resin roller for light loads. Stainless steel shaft type. Transport distance and roller width can be specified within the range of 90 - 620 mm.
Standard Price: MYR 158.00- Days to Ship: 11 Day(s) or more -
Resin Roller (Roller for Conveyor), S Series (SJR-3018), Diameter φ30.6 × Width 90 - 390
MAKITECH
φ30 resin roller. Suited for transporting lightweight, small items with steel frame. Roller unit of the SJR-3018 roller conveyor.
[Features]
· The roller diameter is φ30.6. The minimum roller interval is P50.
· Standard roller width (nominal) is is 90W to 390W.
- Custom sizes are not available.
· Resin molded SUS ball bearing.
· Model 60 frame- CAD ：
- 2D
Days to Ship: 10 Day(s) or more -
Resin Roller Conveyor, Diameter ø30 (Stainless Steel Shaft) × Width 90-390 (BFS Type)
OKURA
[Features]
· Light load conveyor incorporating ø30 resin roller in stainless steel frame. Conveyor length and roller width within the range of 90 to 390 mm can be specified.Standard Price: MYR 114.57- Days to Ship: 13 Day(s) or more -
Plastic Roller (Conveyor Roller), M Series (JR-2015B), Diameter φ 20.0 × Width 100 - 400
MAKITECH
Highly popular φ20 resin roller. Suited for transport of lightweight, small items. The roller component is the lightweight JR-2015B roller conveyor. The widths can be specified in 1 mm increments from 100 to 400 mm.
[Features]
· The roller diameter is φ20.2. The minimum roller interval is P25.
· The standard of the roller width (nominal) is 100W to 400W at intervals of 50mm. Free size is available.
· Uses an aluminum frame. [30 Low-Floor Type Frame]- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Resin Roller (Roller for Conveyor), M Series (JR-5028), Diameter φ 50.3 × Width 100 - 600
MAKITECH
φ50 resin roller. Suited for transport of lightweight, small items. The roller component from the lightweight JR-5028 roller conveyor. The widths can be specified in 1 mm increments from 100 to 600 mm.
[Features]
· The roller diameter is φ50.3. The minimum roller interval is P75.
· Standard roller width (nominal) is 100W to 600W in 50mm increments.
· Can be manufactured to desired size.
· Aluminum extrusion- CAD ：
- 2D
Days to Ship: 10 Day(s) or more -
Conveyor Roller (for Medium/Heavy Load) SERIES FF3
FUJI SEISAKUSHO
Highly functional multi-purpose plastic conveyor rollers with improved dustproof and waterproof performance, as well as excellent impact resistance and sound deadening properties.
[Features]
·For medium and heavy loads. A double labyrinth seal is used for the seal part.
·Press bearings (steel, stainless steel) and precision bearings (6002ZZ) are available.
·In addition, the tube material can be selected from hard polyvinyl chloride (PVC) and steel (ST), which have excellent impact resistance, depending on the application.
·The diameter can be selected from ⌀50, 51, 57, and 61 mm (diameters of 50, 51, 57, and 61 mm) according to the application.
[Applications]
·Ideal for small packages, bottles, cans, foods, newspapers, magazines, textiles, lightweight cartons, and other lightweight items.
·Because it contains bearings, it can rotate more smoothly.
·Because it uses a double labyrinth seal, it is durable even in dusty and watery environments.Standard Price: MYR 153.84- Days to Ship: 12 Day(s) or more -
Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀18.1 × Width 100 - 500 (EAR Type)
OKURA
Optimal for small item transport. Transport distance and roller width can be specified within the range of 100 - 500 mm.
Standard Price: MYR 68.16- Days to Ship: 11 Day(s) or more -
Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀42 × Width 240 - 490 (AR Type)
OKURA
Light and clean. Transport distance and roller width can be specified within the range of 240 - 490 mm.
Standard Price: MYR 89.17- Days to Ship: 11 Day(s) or more -
OKURA
[Features]
· Low noise type with resin bearings.
· Conveyor length and roller width within the range of 240 to 490 mm can be specified.Standard Price: MYR 89.17- Days to Ship: 11 Day(s) or more -
OKURA
Water resistant, low noise type with resin bearings. Stainless steel shaft. Transport distance and roller width can be specified within the range of 240 - 490 mm.
Standard Price: MYR 131.20- Days to Ship: 13 Day(s) or more -
Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀18 × Width 90 - 390 (ES Type)
OKURA
Stainless steel roller with minimum roller diameter of ⌀18. Optimal for transport of ultra-small materials. Transport distance and roller width can be specified within the range of 90 - 390 mm.
Standard Price: MYR 127.16- Days to Ship: 13 Day(s) or more -
Single Unit Stainless Steel Roller (Roller for Conveyor) Diameter ø25.4 × Width 90 - 490 (KS Type)
OKURA
Best suited for transport of lightweight, small items. Transport distance and roller width can be specified within the range of 90 - 490 mm.
Standard Price: MYR 127.16- Days to Ship: 13 Day(s) or more -
Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 690 (PS Type)
OKURA
Roller diameter of ⌀42.7 for use with moderate loads. Transport distance and roller width can be specified within the range of 90 - 690 mm.
Standard Price: MYR 190.31- Days to Ship: 11 Day(s) or more -
Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀48.6 × Width 90 - 690 (LS Type)
OKURA
Roller with a diameter of ⌀48.6 for use with moderate loads. Transport distance and roller width can be specified within the range of 90 - 690 mm.
Standard Price: MYR 232.28- Days to Ship: 12 Day(s) or more -
Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀57 × Width 90 - 690 (SRS Type)
OKURA
Roller diameter of ⌀57 for use with moderate loads. Transport distance and roller width can be specified within the range of 90 - 690 mm.
Standard Price: MYR 277.57- Days to Ship: 11 Day(s) or more -
Single Unit Resin Roller (Roller for Conveyor) Diameter ⌀18 × Width 90 - 390 (BES Type)
OKURA
⌀18 antibacterial resin roller for light loads. Transport distance and roller width can be specified within the range of 90-390 mm.
Standard Price: MYR 95.40- Days to Ship: 13 Day(s) or more -
Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀30 × Width 90 - 390 (KBR Type)
OKURA
⌀30 resin roller for light loads. Transport distance and roller width can be specified within the range of 90 - 390 mm.
Standard Price: MYR 114.57- Days to Ship: 13 Day(s) or more -
Single Unit Plastic Roller (Roller for Conveyor) Diameter ⌀40 × Width 240 - 390 (BRA Type)
OKURA
⌀40 resin roller for light loads. Transport distance and roller width can be specified within the range of 240 - 390 mm.
Standard Price: MYR 154.91- Days to Ship: 11 Day(s) or more -
OKURA
[Features]
• ⌀40 resin rollers for loads.
• Stainless steel shaft type.
• Transport distance and roller width can be specified within the range of 90 - 490 mm.Standard Price: MYR 134.74- Days to Ship: 7 Day(s) or more -
Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀50 × Width 90 - 620 (BBR Type)
OKURA
⌀50 resin roller for light loads. Transport distance and roller width can be specified within the range of 90 - 620 mm.
Standard Price: MYR 158.00- Days to Ship: 13 Day(s) or more -
Stainless Steel Roller, M Series (RS-1912), Diameter φ 19 × Width 100 - 500
MAKITECH
A small-diameter ⌀ 19-mm stainless steel roller. Suitable for transporting small objects. A single roller unit for the RS-1912 roller conveyor. The widths of the roller can be specified in 1-mm increments from 100–500 mm.
[Features]
· The roller diameter is ⌀ 19.0 mm. The minimum roller interval is P25.
· The standard roller width (nominal) is 100–500 mm in increments of 50 mm.
· This roller can also be manufactured in non-standard sizes.- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Stainless Steel Roller, S Series (SS-3810), Diameter φ 38.1 × Width 90 - 690
MAKITECH
General purpose Ø38 stainless steel roller. · Individual SS-3810 roller.
[Features]
· The roller diameter is φ38.1. The minimum roller interval is P50.
· The roller width (nominal) corresponds to 90W to 690W standard dimensions by default.
· Configurable sizes (intermediate sizes) are not available.
· Pressed bearing.
· Model 60 frame- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Plastic Roller, S Series (SJR-4023S), Diameter φ40 × Width 240 - 490
MAKITECH
[Features]
- φ42 resin roller.
- Individual roller for lightweight SJR-4023S roller conveyor with aluminum frame.- CAD ：
- 2D
Days to Ship: 10 Day(s) or more -
Aluminum Roller (Roller For Conveyor), M Series (RA-2816) Diameter φ28.6 × Width 100 - 500
MAKITECH
Small-diameter φ28 aluminum roller. Individual roller for RA-2816 roller conveyor, a lightweight conveyor; suitable for small item transport.
[Features]
· The roller diameter is φ28.6. The minimum roller interval is P40.
· Standard roller width (nominal) is 100W to 500W in 50mm increments.
· Machined bearings, high qualityDays to Ship: 13 Day(s) or more -
Stainless Steel Roller, M Series (HG-RS1210), Diameter φ 12 × Width 100 - 400
MAKITECH
Superfine φ12 stainless steel roller. All stainless steel individual roller for HG-RS1210 roller conveyor, which is optimal for transport of small items.
[Features]
· The roller diameter is φ12.0. The minimum roller interval is P15.
· Standard roller width (nominal) is 100W to 400W in 50mm increments.
· Can be manufactured to desired size.
· L Type Frame- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Stainless Steel Roller, M Series (RS-5715), Diameter φ 57 × Width 100 - 899
MAKITECH
φ 57 Stainless steel roller. Individual roller for RS-5715 moderate load roller conveyor.
[Features]
· The roller diameter is 57.0 mm. The minimum roller interval is P75.
· The standard of the roller width (nominal) is 100 to 800 mm at intervals of 50 mm.
· Configurable size is available.
· Standard bearing: high quality.- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Aluminum Roller (Roller For Conveyor), M Series (RA-3816), Diameter φ38.1 × Width 100 - 600
MAKITECH
General purpose φ38 aluminum roller. Individual roller for the lightweight RA-3816 roller conveyor. The widths can be specified in 50 mm increments from 100 to 600 mm.
[Features]
· The roller diameter is φ38.1. The minimum roller interval is P50.
· This model is most frequently used with the aluminum rollers.
· Standard roller width (nominal) is 100W to 600W in 50mm increments.
· Pressed-in bearing, inexpensive type- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Resin Roller, M Series (JR-3823), Diameter φ38 × Width 100 - 500
MAKITECH
A general purpose ⌀ 38-mm resin roller. Suitable for transporting light loads. A single roller unit for the JR-3823 roller conveyor. The widths of the roller can be specified in 1-mm increments from 100–500 mm.
[Features]
· The roller diameter is ⌀ 38 mm. The minimum roller interval is P50.
· The standard roller width (nominal) is 100–500 mm in increments of 50 mm.
· This roller can also be manufactured in non-standard sizes. Utilizes an aluminum frame.- CAD ：
- 2D
Days to Ship: 10 Day(s) or more -
Stainless steel roller (conveyor roller) M Series (RS-6015) diameter φ 60.5 x width100-1000
MAKITECH
A resin flanged φ 60 stainless steel roller for moderate to light loads. Replaceable bearings. Roller unit of the RS-6015 roller conveyor. The widths can be specified in 1 mm increments from 100 to 1, 000 mm.
[Features]
· The roller diameter is 60.5 mm. The minimum roller interval is P75.
· The standard of the roller width (nominal) is 100 to 800 mm at intervals of 50 mm.
· Configurable size is available.
· Standard bearing: high quality.- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Aluminum Roller (Roller For Conveyor) M Series (RA-4515) Diameter φ45.0 × Width 100-600
MAKITECH
φ45 aluminum roller. Suited for transport of light loads. The conveyor itself is also lightweight. Roller unit of the RA-4515 roller conveyor.
[Features]
· The roller diameter is φ45.0. The minimum roller interval is P50.
· Standard roller width (nominal) is 100W to 600W in 50mm increments.
· Pressed-in bearing and inexpensive type- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Aluminum Roller (Roller For Conveyor) M Series (RAF-4515) Diameter φ45.0 × Width 243-393
MAKITECH
Cost effective type φ45 aluminum roller suitable for transport of light loads. The conveyor itself is also lightweight. Roller unit of the RAF-4515 roller conveyor.
[Features]
• Roller diameter is φ45.0. Minimum roller spacing is P75.
- Two roller widths available: 300W and 450W.
• Pressed-in bearing and inexpensive type- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Plastic Roller (Conveyor Roller), M Series (JR-3018B), Diameter φ 30.6 × Width 100 - 500
MAKITECH
φ 30 resin roller. Suited for transport of small, lightweight items. The roller component from the lightweight JR-3018B roller conveyor. The widths can be specified in 1 mm increments from 100 to 500 mm.
[Features]
· The roller diameter is 30.5 mm. The minimum roller interval is P40.
· The standard roller width (nominal) is 100 to 500 mm at intervals of 50 mm.
· Configurable size is available.
· Aluminum extrusion.- CAD ：
- 2D
Days to Ship: 10 Day(s) or more -
Resin Roller (Roller for Conveyor), M Series (JR-4023), Diameter φ 40.0 × Width 100 - 600
MAKITECH
A ⌀ 40-mm resin roller. Suitable for transporting lightweight small items. A single roller unit for the lightweight JR-4023 roller conveyor. The width of the roller can be specified in 1-mm increments from 100–600 mm.
[Features]
· The diameter of the roller is ⌀ 40.0 mm. The minimum roller interval is P50.
· The standard roller width (nominal) is 100–600 mm in increments of 50 mm.
· This roller can also be manufactured in non-standard sizes.
· Utilizes an aluminum frame.- CAD ：
- 2D
Days to Ship: 10 Day(s) or more -
Resin Roller (Roller for Conveyor), M Series (JR-5730), Diameter φ 57.0 × Width 100 - 600
MAKITECH
φ57 resin roller. Suited for transport of lightweight, small items. The roller component from the lightweight JR-5730 roller conveyor. The widths can be specified in 1 mm increments from 100 to 600 mm.
[Features]
· The roller diameter is φ57.0. The minimum roller interval is P75.
· Standard roller width (nominal) is 100W to 600W in 50mm increments.
· Can be manufactured to desired size.
· Aluminum extrusion- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Aluminum Roller (Roller For Conveyor), M Series (R900), Diameter φ45.0 × Width 200 - 600
MAKITECH
A light to medium load type with an inside frame radius of 900 mm. Roller unit of the RA-TC900 roller conveyor. Widths can be specified in 1 mm increments from 200 to 600 mm.
- CAD ：
- 2D
Days to Ship: 11 Day(s) or more -
Aluminum Roller (Roller For Conveyor), S Series (SA-1810), Diameter φ18.1 × Width 100 - 500
MAKITECH
φ 18 aluminum roller. Suitable for transporting small parts. Roller unit of the SA-1810 roller conveyor.
[Features]
· The roller diameter is 18.0 mm. The minimum roller interval is P20.
· The standard of the roller width (nominal) is 100 to 500 mm at intervals of 50 mm.
· Configurable size is available.
· Press bearing.- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Aluminum Roller (Roller For Conveyor) S Series (SA-4218) Diameter φ42.5 × Width 240-490
MAKITECH
φ 42 aluminum roller. Suited for transport of light loads. The conveyor itself is also lightweight. Roller unit of the SA-4218 roller conveyor.
[Features]
· The roller diameter is 42.5 mm. The minimum roller interval is P50.
· The standard roller width (nominal) is 90 to 490 mm.
· Configurable size (intermediate size) is available.
· Pressed-in bearing.
· Model 63 frames.- CAD ：
- 2D
Days to Ship: 9 Day(s) or more -
Aluminum Roller (Roller For Conveyor) S Series (SA-4218M) Diameter φ42.5 × Width 240-490
MAKITECH
A bearing element, resin bushing type ⌀ 42-mm aluminum roller. Suitable for lightweight conveying. The conveyor itself is also lightweight. A single roller unit for the SA-4218M roller conveyor.
[Features]
· The roller diameter is ⌀ 42.5 mm. The minimum roller interval is P50.
· The standard roller width (nominal) is 90–490 mm.
· This roller can also be manufactured in non-standard sizes.
· Resin bushing.
· Model 63 frame.- CAD ：
- 2D
Days to Ship: 9 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Long Roller Type |
| Type |
| Outer Dia. D(Ø) |
| Roller Material |
| Shaft Type |
| Bearing |
| Width W(mm) |
| Drive |
| Surface Treatment |
| Properties |
| Power Supply |
| Short Roller Type |
| Lining |
| Lining Material |
| Lining Hardness(Shore A) |
| Lining Color |
| Bearing Material |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TRUSCO NAKAYAMA | MAKITECH | MAKITECH | OKURA | MAKITECH | MAKITECH | OKURA | OKURA | MAKITECH | OKURA | MAKITECH | MAKITECH | FUJI SEISAKUSHO | OKURA | OKURA | OKURA | OKURA | OKURA | OKURA | OKURA | OKURA | OKURA | OKURA | OKURA | OKURA | OKURA | OKURA | MAKITECH | MAKITECH | MAKITECH | MAKITECH | MAKITECH | MAKITECH | MAKITECH | MAKITECH | MAKITECH | MAKITECH | MAKITECH | MAKITECH | MAKITECH | MAKITECH | MAKITECH | MAKITECH | MAKITECH | MAKITECH |
| Product Series | Aluminum Roller (Roller For Conveyor), M Series (RA-5716) Diameter φ57.1 × Width 100 - 800 | Stainless steel roller (conveyor roller) M Series (ARS-6015) diameter φ 60.5 x width100-1000 | Stainless Steel Roller Curve Conveyor, Diameter ø42.7 × Width 305-690 (NTS Type) | Stainless Steel Roller, M Series (RS-1010), Diameter φ 10 × Width 50 - 200 | Stainless Steel Roller, S Series (SS-4212), Diameter φ 42.7 × Width 90 - 790 | Single Unit Stainless Steel Roller (Roller for Conveyor) Diameter ø38.1 × Width 90 - 690 (QS Type) | Resin Roller (Roller for Conveyor), S Series (SJR-3018), Diameter φ30.6 × Width 90 - 390 | Resin Roller Conveyor, Diameter ø30 (Stainless Steel Shaft) × Width 90-390 (BFS Type) | Plastic Roller (Conveyor Roller), M Series (JR-2015B), Diameter φ 20.0 × Width 100 - 400 | Resin Roller (Roller for Conveyor), M Series (JR-5028), Diameter φ 50.3 × Width 100 - 600 | Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀18.1 × Width 100 - 500 (EAR Type) | Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀42 × Width 240 - 490 (AR Type) | Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀18 × Width 90 - 390 (ES Type) | Single Unit Stainless Steel Roller (Roller for Conveyor) Diameter ø25.4 × Width 90 - 490 (KS Type) | Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 690 (PS Type) | Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀48.6 × Width 90 - 690 (LS Type) | Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀57 × Width 90 - 690 (SRS Type) | Single Unit Resin Roller (Roller for Conveyor) Diameter ⌀18 × Width 90 - 390 (BES Type) | Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀30 × Width 90 - 390 (KBR Type) | Single Unit Plastic Roller (Roller for Conveyor) Diameter ⌀40 × Width 240 - 390 (BRA Type) | Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀50 × Width 90 - 620 (BBR Type) | Stainless Steel Roller, M Series (RS-1912), Diameter φ 19 × Width 100 - 500 | Stainless Steel Roller, S Series (SS-3810), Diameter φ 38.1 × Width 90 - 690 | Plastic Roller, S Series (SJR-4023S), Diameter φ40 × Width 240 - 490 | Aluminum Roller (Roller For Conveyor), M Series (RA-2816) Diameter φ28.6 × Width 100 - 500 | Stainless Steel Roller, M Series (HG-RS1210), Diameter φ 12 × Width 100 - 400 | Stainless Steel Roller, M Series (RS-5715), Diameter φ 57 × Width 100 - 899 | Aluminum Roller (Roller For Conveyor), M Series (RA-3816), Diameter φ38.1 × Width 100 - 600 | Resin Roller, M Series (JR-3823), Diameter φ38 × Width 100 - 500 | Stainless steel roller (conveyor roller) M Series (RS-6015) diameter φ 60.5 x width100-1000 | Aluminum Roller (Roller For Conveyor) M Series (RA-4515) Diameter φ45.0 × Width 100-600 | Aluminum Roller (Roller For Conveyor) M Series (RAF-4515) Diameter φ45.0 × Width 243-393 | Plastic Roller (Conveyor Roller), M Series (JR-3018B), Diameter φ 30.6 × Width 100 - 500 | Resin Roller (Roller for Conveyor), M Series (JR-4023), Diameter φ 40.0 × Width 100 - 600 | Resin Roller (Roller for Conveyor), M Series (JR-5730), Diameter φ 57.0 × Width 100 - 600 | Aluminum Roller (Roller For Conveyor), M Series (R900), Diameter φ45.0 × Width 200 - 600 | Aluminum Roller (Roller For Conveyor), S Series (SA-1810), Diameter φ18.1 × Width 100 - 500 | Aluminum Roller (Roller For Conveyor) S Series (SA-4218) Diameter φ42.5 × Width 240-490 | Aluminum Roller (Roller For Conveyor) S Series (SA-4218M) Diameter φ42.5 × Width 240-490 | ||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||
| Days to Ship | 10 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 9 Day(s) or more | 13 Day(s) or more | 11 Day(s) or more | 10 Day(s) or more | 13 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 12 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 11 Day(s) or more | 12 Day(s) or more | 11 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 13 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 13 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more |
| Long Roller Type | Straight | Straight | Straight | Tapered | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight |
| Type | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller | Long Roller |
| Outer Dia. D(Ø) | 38 ～ 60.5 | 57.1 | 60.5 | 42.7 | 10 | 42.7 | 38.1 | 50 | 30.5 | 30 | 20.2 | 50.3 | 50 ～ 57 | 18.1 | 42 | 42 | 42 | 18 | 25.4 | 42.7 | 48.6 | 57 | 18 | 30 | 40 | 40 | 50 | 19 | 38.1 | 40 | 28.6 | 12 | 57 | 38.1 | 38 | 60.5 | 45 | 45 | 30.5 | 40 | 57 | 45 | 18.1 | 42.5 | 42.5 |
| Roller Material | Stainless Steel | Aluminum | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Plastic | Plastic | Plastic | Plastic | Plastic | Plastic | Aluminum | Aluminum | Aluminum | Aluminum | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Plastic | Plastic | Plastic | Plastic | Plastic | Stainless Steel | Stainless Steel | Plastic | Aluminum | Stainless Steel | Stainless Steel | Aluminum | Plastic | Stainless Steel | Aluminum | Aluminum | Plastic | Plastic | Plastic | Aluminum | Aluminum | Aluminum | Aluminum |
| Shaft Type | Shaft | - | - | No Shaft (Round Hole) / Shaft | - | - | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | - | No Shaft (Round Hole) / Shaft | - | - | No Shaft (Round Hole) | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | No Shaft (Round Hole) / Shaft | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Bearing | - | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double | Double |
| Width W(mm) | 298 ～ 488 | - | - | 305 ～ 690 | - | - | 90 ～ 690 | 90 ～ 620 | - | 90 ～ 390 | - | - | 100 ～ 700 | 100 ～ 500 | 240 ～ 490 | 240 ～ 490 | 240 ～ 490 | 90 ～ 390 | 90 ～ 490 | 90 ～ 690 | 90 ～ 690 | 90 ～ 690 | 90 ～ 390 | 90 ～ 390 | 240 ～ 490 | 90 ～ 490 | 90 ～ 620 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Drive | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | Not Provided | Clear Anodize | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Clear Anodize | Not Provided | Not Provided | Clear Anodize | Not Provided | Not Provided | Clear Anodize | Clear Anodize | Not Provided | Not Provided | Not Provided | Clear Anodize | Clear Anodize | Clear Anodize | Clear Anodize |
| Properties | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance | Water Resistance |
| Power Supply | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Short Roller Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lining | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Lining Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lining Hardness(Shore A) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lining Color | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Bearing Material | - | Steel | Stainless Steel | Steel | Stainless Steel | Stainless Steel | Steel | Plastic | Plastic | Plastic | Plastic | Plastic | Steel | Steel | Steel | Plastic | Plastic | Steel | Steel | Steel | Steel | Steel | Plastic | Plastic | Plastic | Plastic | Plastic | Stainless Steel | Stainless Steel | Plastic | Steel | Stainless Steel | Stainless Steel | Steel | Plastic | Stainless Steel | Steel | Steel | Plastic | Plastic | Plastic | Steel | Steel | Steel | Plastic |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Long Roller Type
-
Straight
-
Tapered
-
With Motor
-
With Sprocket
-
Motorized Taper
-
With Pulley
-
Straight
-
Type
- Long Roller
- Short Roller
- Shaft for Roller
-
Outer Dia. D(Ø)
-
Roller Material
- Steel
- Stainless Steel
- Aluminum
- Plastic
- Rubber
-
Shaft Type
- No Shaft (Round Hole)
- Shaft
- Others
-
Bearing
- Not Provided
- Single
- Double
-
Width W(mm)
- 15
- 25
- 50
- 65.5
- 90
- 100
- 102
- 103
- 106
- 150
- 152
- 153
- 156
- 200
- 202
- 203
- 206
- 240
- 250
- 252
- 253
- 256
- 270
- 290
- 298
- 300
- 302
- 303
- 305
- 306
- 320
- 330
- 332
- 340
- 344
- 350
- 352
- 360
- 370
- 380
- 383
- 385
- 388
- 390
- 400
- 402
- 403
- 406
- 410
- 418
- 420
- 429
- 440
- 448
- 450
- 453
- 460
- 470
- 480
- 485
- 486
- 488
- 490
- 500
- 502
- 503
- 505
- 506
- 510
- 513
- 516
- 520
- 525
- 530
- 547
- 550
- 560
- 580
- 585
- 595
- 597
- 598
- 600
- 610
- 615
- 618
- 620
- 625
- 628
- 630
- 650
- 660
- 665
- 670
- 680
- 688
- 690
- 700
- 706
- 707
- 710
- 747
- 750
- 765
- 768
- 776
- 785
- 790
- 800
- 825
- 830
- 850
- 880
- 890
- 900
- 950
- 980
- 990
- 1000
- 1090
- 1150
- 1190
- 1300
- 1530
- 1730
- 2000
- 2200
-
Drive
-
Surface Treatment
-
Properties
-
Power Supply
-
Short Roller Type
-
Straight
-
Straight
-
Lining
-
Lining Material
-
Lining Hardness(Shore A)
-
Lining Color
-
Bearing Material
-
Cleaning Method
- Degreasing
- Precision Cleaning
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- MAKITECH (26)
- OKURA (18)
- FUJI SEISAKUSHO (1)
- MISUZU KOKI (1)
- TRUSCO NAKAYAMA (1)
- ITOUDENKI (0)
- TAIYO KOGYO (0)
- MEIKIKOU (0)
- JAPAN ROLLER (0)
- ARAI MFG (0)
CAD
-
- 2D
- 3D
Related Categories to Conveyer Rollers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy