(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Kindly be informed that it will be peak period in conjunction with the Chinese New Year festive season. Delivery pickup upon 25 January 2025 estimated would arrive after CNY holidays. Please expect slight delay for orders shipped during this peak season and we thank you for your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
6 Series - Aluminum Frames 30, 50, 60, 100 Square（Extrusion Size：50x100）
| Days to Ship |
|
|---|
-
8-50 Series Aluminum Frame - 50x100mm, 10mm Slot Width
MISUMI
Aluminum Frame 8-50 Series/slot width 10/50x100mm
Aluminium Profile is a device used to build machine structures, available in various sizes,cross section shapes and with different types of surfaces treatment to choose from.
[Feature]
● Shape : Rectangle.
● Slot width :8 mm.
● Cross-section : 50 mm. x 100 mm.
number of width slot = 1 slot
number of length slot = 2 slots
● Overall length :The size is configurable between 50 to 4000 mm, and the minimum length can be increased by increments 0.5 mm.
● Material : Aluminium grade A6N01SS-T5, A6061SS-T6 Equivalent, A6063S-T5 and A6063S-T6
● Surface treatment: Clear Anodize and Black Anodize
[Application]
Used for automatic machine structures in various industries such as automotive industry, electronics industry, etc.- Volume Discount
Days to Ship: 10 Day(s) or more -
Aluminum Frame 8-45 Series/slot width 10/45x90mm, Parallel Surfacing,
MISUMI
Aluminum Frame 8-45 Series/slot width 10/45x90mm, Parallel Surfacing,
Aluminum profile is a device used to build machine structures. It is available in various sizes, cross-sectional shapes, and with different types of surface treatments to choose from. Moreover, it comes with a milled surface.
[Feature]
● Shape : Rectangle.
● Slot width : 10 mm.
● Cross-section : 45x90 mm., 50x100 mm., 90x45 mm. and 100x50 mm.
number of width slot = 1 slot
number of length slot = 2 slots
● Overall length :The size is configurable between 100 to 3000 mm, and the minimum length can be increased by increments 0.5 mm.
● Material : Aluminium grade A6N01SS-T5 and A6061SS-T6 Equivalent
● Surface treatment: Clear Anodize
[Application]
Used for automatic machine structures in various industries such as automotive industry, electronics industry, etc.Days to Ship: 12 Day(s) or more -
Aluminum Frame 6 Series/slot width 8/100x50mm, Parallel Surfacing
MISUMI
Aluminum Frame Series 6 with parallel surfacing 50 x 100mm. The top and bottom surfaces are milled. Can be used for linear guides, etc.
Surface treatment is not applied to cut surfaces and additional machining parts.Days to Ship: 12 Day(s) or more -
6 Series Aluminum Frame - 50x100mm, 8mm Slot Width
MISUMI
Aluminum Frame Series 6, Square shape 50 x 100mm, 4- Side Slots with Slot width 8mm
Surface treatment is not applied to cut surfaces and additional machining parts.- Volume Discount
Days to Ship: 10 Day(s) or more -
High Rigidity Frame, H10 Series, AFS-50100
NIC AUTOTEC
Built for strength, the H10 series consists of frame, bracket and fastening parts that can withstand large loads measured in tons.
Days to Ship: 7 Day(s) or more -
High Rigidity Frame, H10 Series, AFS-50100B
NIC AUTOTEC
Built for strength, the H10 series consists of frame, bracket and fastening parts that can withstand large loads measured in tons.
Days to Ship: 7 Day(s) or more -
High Rigidity Frame, H10 Series, AFS-50100H
NIC AUTOTEC
Built for strength, the H10 series consists of frame, bracket and fastening parts that can withstand large loads measured in tons.
Days to Ship: 7 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Standard Extrusion Size(mm) |
| Extrusion Type_ |
| Number of Slotted Surfaces |
| Surface Treatment |
| Extrusion Size |
| Extrusion Series |
| Extrusion Type |
| Number of Extrusion Slots |
| Surface Milled |
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | NIC AUTOTEC | NIC AUTOTEC | NIC AUTOTEC |
| Product Series | Aluminum Frame 8-45 Series/slot width 10/45x90mm, Parallel Surfacing, | Aluminum Frame 6 Series/slot width 8/100x50mm, Parallel Surfacing | |||||
| CAD |
|
|
|
|
|
|
|
| Days to Ship | 10 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 10 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more |
| Standard Extrusion Size(mm) | 50 | 50 | 50 | 50 | 50 | 50 | 50 |
| Extrusion Type_ | HFS (Standard) / EFS (Lightweight) / GFS (High Rigidity) / NEFS (Economy) / GNFS (High Rigidity, Economy) | HFS (Standard) / GFS (High Rigidity) | HFS (Standard) | HFS (Standard) / EFS (Lightweight) / NFS (Economy) | - | - | - |
| Number of Slotted Surfaces | Four-Side Slots | Four-Side Slots | Four-Side Slots | Four-Side Slots | Four-Side Slots | Four-Side Slots | Four-Side Slots |
| Surface Treatment | Black Anodize ～ Clear Anodize | Clear Anodize | Clear Anodize | Black Anodize ～ Clear Anodize | - | - | - |
| Extrusion Size | 50x100 | 50x100 | 50x100 | 50x100 | 50x100 | 50x100 | 50x100 |
| Extrusion Series | 8-45 Series | 8-45 Series | 6 Series | 6 Series | NIC Autotec H10 Series | NIC Autotec H10 Series | NIC Autotec H10 Series |
| Extrusion Type | Rectangle Shape | Rectangle Shape | Rectangle Shape | Rectangle Shape | Rectangle Shape | Rectangle Shape | Rectangle Shape |
| Number of Extrusion Slots | 1 Slot x 2 Slots | 1 Slot x 2 Slots | 2 Slots x 4 Slots | 2 Slots x 4 Slots | 1 Row Groove × 2 Row Groove | 1 Row Groove × 2 Row Groove | 1 Row Groove × 2 Row Groove |
| Surface Milled | Not Provided | Provided | Provided | Not Provided | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Standard Extrusion Size(mm)
-
Extrusion Type_
-
Number of Slotted Surfaces
-
Four-Side Slots -
Three-Side Slots -
Two-Side Slots -
Two-Side Slots (Opposed) -
One-Side Slots
-
-
Surface Treatment
-
Extrusion Size
- 10x20
- 10x40
- 15x15
- 15x25
- 15x30
- 15x40
- 15x120
- 15x150
- 20x20
- 20x25
- 20x30
- 20x40
- 20x60
- 20x80
- 25x25
- 25x32.3
- 25x35.3
- 25x40
- 25x50
- 25x55
- 25x165
- 30x30
- 30x40
- 30x60
- 30x90
- 30x120
- 30x300
- 40x20
- 40x30
- 40x40
- 40x52
- 40x54.7
- 40x60
- 40x80
- 40x120
- 40x160
- 45x45
- 45x90
- 45x180
- 50x25
- 50x50
- 50x100
- 50x200
- 60x20
- 60x30
- 60x40
- 60x60
- 60x90
- 60x120
- 60x180
- 80x20
- 80x40
- 80x80
- 80x160
- 90x30
- 90x45
- 90x60
- 90x90
- 90x180
- 100x50
- 100x100
- 100x150
- 100x200
- 120x120
- 300x30
-
Extrusion Series
- 3 Series
- NIC Autotec M4 Series
- 5 Series
- IMAO (item) Line 5
- 6 Series
- IMAO (item) Line 6
- NIC Autotec M6 Series
- 8 Series
- IMAO (item) Line 8
- NIC Autotec M8 Series
- 8-45 Series
- NIC Autotec H10 Series
- SUS SF20 (6 mm Groove Width Type)
- LECOFRAME 25 Series (For Light/Medium Structures)
- SUS SF30 (8 mm Groove Width Type)
- MISUMI, European Standard, Aluminum Frame, 30/40/50/60 Series, (Groove Width: 8 mm)
- LECOFRAME 40 Series (For Medium/Heavy Structures)
-
Extrusion Type
-
Square Shape -
Rectangle Shape -
R Shape -
L Shape -
L/R Shape -
Triangle Shape -
Angled Shape -
Mixed Slot Widths Shape -
Bent Shape -
With C plane
-
-
Number of Extrusion Slots
- 1 Row Groove × 0 Row Groove
- 1-row groove × 1-row groove
- 1 Row Groove × 1 Row Groove
- 1 Slot x 1 Slot
- 1 Row Groove × 2 Row Groove
- 1 Slot x 2 Slots
- 1 Row Groove × 3 Row Groove
- 1 Slot x 3 Slots
- 1 Row Groove × 4 Row Groove
- 1 Slot x 4 Slots
- 1 Row Groove × 5 Row Groove
- 1 Slot x 10 Slots
- 2 Row Groove × 0 Row Groove
- 2 Row Groove × 1 Row Groove
- 2 Slots x 1 Slot
- 2 Row Groove × 2 Row Groove
- 2 Slots x 2 Slots
- 2列槽×2列槽
- 2 Row Groove × 3 Row Groove
- 2 Slots x 3 Slots
- 2 Row Groove × 4 Row Groove
- 2 Slots x 4 Slots
- 2 Row Groove × 6 Row Groove
- 3 Row Groove × 1 Row Groove
- 3 Slots x 1 Slot
- 3 Row Groove × 2 Row Groove
- 3 Slots x 2 Slots
- 4 Slots x 1 Slot
- 4 Slots x 2 Slots
- 4 Row Groove × 4 Row Groove
- 4 Slots x 4 Slots
- 10 Slots x 1 Slot
-
Surface Milled
- Provided
- Not Provided
Narrow search by specifying Manufacturer
-
- NIC AUTOTEC (3)
- IMAO CORPORATION (0)
- SUS (0)
- NABESEI (0)
- YUKIGIKEN (0)
- YAMATO CO LTD (0)
CAD
-
- 2D
- 3D
Related Categories to 6 Series - Aluminum Frames 30, 50, 60, 100 Square
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy