(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Kindly be informed that it will be peak period in conjunction with the Chinese New Year festive season. Delivery pickup upon 25 January 2025 estimated would arrive after CNY holidays. Please expect slight delay for orders shipped during this peak season and we thank you for your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Adjuster Bolt（Thread Surface Treatment：Trivalent Chromate）
| Days to Ship |
|
|---|
-
MISUMI
- Leveling Mount/Standard type.
- Part number for series including of NFJN, NFJNS and NFJNF type.
- Type of product : Adjusting Bolt.
- Body Material: SS400 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Trivalent Chromate (SS400) and Electrolytic Polishing (SUS304)
- Nominal of Thread size (M): 5, 6, 8, 10, 12, 16 and 20.
- Thread Length size: 30, 40, 50, 60, 75, 80, 100, 125, 130, 150, 180, 200, 250 and 300 mm.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.- Volume Discount
Days to Ship: 1 Day(s) or more -
MISUMI
- Leveling Mount/Heavy Load
- Product Type: Adjusting Bolt.
- Part number for series including of FJFN, FJFNS, FJFNB, FJFNF and FJFNH.
- Body Material: SS400 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Trivalent Chromate solution for SS400 Steel.
- Nominal of Thread size (M): 10, 12, 16, 20 and 24.
- Thread Length size75, 100, 125, 130, 150 and 180 mm.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.
- The Leveling Mounts: RoHS compliant.- Volume Discount
Days to Ship: 1 Day(s) or more -
MISUMI
- Adjustment Pads/Fixed Type
- Product type: Adjusting Bolt.
- Part number for series including of FJKN (Steel) and FJKNS (Stainless steel).
- Body Material: SS400 steel and stainless steel SUS304.
- Surface Treatment: Trivalent Chromate solution for SS400 steel.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 75, 100, 125, 130 150 and 180 mm.
- Screw shaft turns independently of the base and tilts slightly.
- This Adjustment Pad type has one hole is machined for drive-in.- Volume Discount
Standard Price: MYR 16.51- Days to Ship: 1 Day(s) or more -
MISUMI
- Adjustment Pads/Two Hole Type.
- Part number for series including of FJWN and FJWNS.
- Body Material: SS400 steel and stainless steel SUS304.
- Surface Treatment: Trivalent Chromate solution and Electrolytic Polishing.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 75, 100, 125, 130, 150 and 180 mm.
- This series designed two holes are machined for drive-in anchors.
- Screw shaft turns independently of the base and tilts slightly.
- For Adjustment Pads type: RoHS compliant.- Volume Discount
Standard Price: MYR 31.52- Days to Ship: 1 Day(s) or more -
MISUMI
- Leveling Mount Non- Slip Type
- Part number for series including of is FJGN, FJGM, FJGNS and FJGMS.
- Body Material: SS400 Steel and SUS304 Stainless steel.
- Body Surface Treatment: Trivalent Chromate and Electrolytic Polishing.
- Rubber Material: Elastomer, Neoprene, Non-Migration Chloroprene Rubber, Electrically Conductive Rubber, PVC (Dark Blue).
- Nominal of Thread size (M): 8, 10, 12, 16 and 20.
- Thread Length size: 50, 75, 100, 125, 130, 150 and 180 mm.
- Screw shaft turns independently of the base and tilts slightly.- Volume Discount
Standard Price: MYR 11.38- Days to Ship: 1 Day(s) or more -
NABEYA BI-TECH
[Features]
· A leveling foot in which the screw and pad are made of steel.
· FDM: male thread and FDF: female thread.
· The pad can be tilted up to 15°.
· Effective for use on slopes.
· There are products that include a Delrin* cap (FDM-KS/EDE-KS) and products that include a Santoprene** cap (FDM-KR/FDF-KR).
· Material and finish: Screw/pad: SUS22L, trivalent chromate finish.
· Lock nut: S45C, trivalent chromate finishStandard Price: MYR 81.87- Days to Ship: 5 Day(s) or more -
Adjuster for Heavy Weights D-C/D-C, S
DAIWARASHI
A standard type adjuster for heavy loads
[Features]
· The receiver is a forged item.
· Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
· D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
· Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.- CAD ：
- 2D
Standard Price: MYR 30.23- Days to Ship: 4 Day(s) or more -
MISUMI
- Adjuster Feet/Resin Rubber Type
- Product type: Adjusting Bolt.
- Part number for series including of LEMNS(Steel) and LEMNT (Stainless steel).
- Body, Thread, and nut Material: S45C steel and stainless steel SUS304.
- Body, Thread and Surface Treatment: Trivalent Chromate solution for S45C steel.
- Nominal of Thread size (M): 10, 12 and 16.
- Thread Length size: 75, 100 and 130 mm.
- Tiltable in all 360° directions.
- The screw shaft is tilted to allow use on angled floor surfaces.- Volume Discount
Standard Price: MYR 50.13- Days to Ship: 2 Day(s) or more -
Standard Price: MYR 46.75- Days to Ship: 4 Day(s) or more -
Adjuster for Anchor Fixing D-EII/D-EII-ST
DAIWARASHI
A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
[Features]
· Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
· Can easily be fixed using an anchor bolt.
· Please use an anchor bolt.
· Please use a 12 mm anchor bolt.
· Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
· Note: The screw rotates and tilts somewhat.- CAD ：
- 2D
Standard Price: MYR 32.23- Days to Ship: 4 Day(s) or more -
Adjuster for Anchor Fixing (Large Pedestal Type) D-E-W
DAIWARASHI
A medium load type adjuster for anchor fixing in which the base is wide and stable
[Features]
· By increasing the size and thickness of the pedestal part, the stability after installation and the resistance horizontal shaking of the anchor fixing part have been improved.
· Note: The screw shaft tilts somewhat- CAD ：
- 2D
Standard Price: MYR 70.56- Days to Ship: 4 Day(s) or more -
Leveling Mounts - Pivot Short Type
MISUMI
- Leveling Mounts - Pivot Short Type.
- The part number is FJRP.
- Foot Base Material: Stainless Steel (SUS304)
- Thread Material: Carbon Steel
- Thread Surface Treatment: Trivalent Chromate solution
- The Bottom Pad Material: Polyamide.
- Nominal of Thread size (M): 6, 8, 10, and 12.
- Leveling Mounts Thread Length size: 14, 19, 20 and 25 mm.
- For Leveling Mounts type: RoHS compliant.
- Suitable for use for floor surface is curved and in condition of the leg has an angle.- Volume Discount
Standard Price: MYR 11.56- Days to Ship: 2 Day(s) -
Adjuster, Anchor Fixing, With Non-Shake Thread Section, D-J-EII
DAIWARASHI
An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.- CAD ：
- 2D
Standard Price: MYR 37.52- Days to Ship: 4 Day(s) or more -
MISUMI
- Tabletop Leveling Mounts
- Product type: Mounting.
- The part number is NFB.
- Main Body Material: PP Resin plastic.
- Tabletop Leveling Mounts Thread Material is SS400 Carbon steel.
- Thread Surface Treatment: Trivalent Chromate solution.
- Nominal of Thread size (M): 5, 6, 8 and 10
- Tabletop Leveling Mounts Body Color: Black.
- Screws and pads are integrated, and Hex nut included.
- For Leveling Mounts type: RoHS10 compliant.
- Pads intended to fix lightweighted equipment, such as desktop type inspection tools.- Volume Discount
Standard Price: MYR 7.27- Days to Ship: 1 Day(s) or more -
Adjuster Feet/Resin Rubber Type
MISUMI
- Adjuster Feet/Resin Rubber Type
- Part number for series including of AJPD, AJPDS, AJPDR and AJPDSR.
- Body Material: SS400 steel and stainless steel SUS304.
- Surface Treatment: Trivalent Chromate solution for SS400 steel.
- Bottom Material: Reinforced Polyacetal for Pad Bottom and NBR for Rubber Pad.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 60, 70, 80, 100, 130, 150 and 180 mm.
- Tiltable in all 360° directions.
- Use of the Rubber Pad Type in full ground contact will be less slippery.- Volume Discount
Standard Price: MYR 52.13- Days to Ship: 4 Day(s) or more -
Adjuster Feet/Tapped Socket Type
MISUMI
- Adjuster Feet/Tapped Socket Type.
- Part number for series including of LEMN, LEMS and LEMT type.
- Type of product : Adjusting Bolt.
- Body Material: Nylon Plastic, Carbon Steel and SUS303 Stainless steel.
- Socket Material: SUM24, SUM23 and SUS303.
- Socket Surface Treatment: Trivalent Chromate and electroless Nickel Plating.
- Nominal of Thread size (M): 6, 8, 10, 12 and 16.
- Thread Length size: 40, 50, 63, 80, 100 and 125 mm.
- This product can be used as a strike plate to fix the adjustment bolt.- Volume Discount
Standard Price: MYR 25.46- Days to Ship: 2 Day(s) or more -
Adjuster Pad - Rotary Type, Nylon Pad Bottom
MISUMI
[Features]·The screw shaft is tilted to allow use on angled floor surfaces.
- Volume Discount
Standard Price: MYR 35.15- Days to Ship: 4 Day(s) or more -
Foot Jack FJC Type (Heavy Load Type)
NABEYA
A type of casting base that can support heavy loads.
[Features]
· A Phillips head slot has been provided on the base bottom and assembly can be performed using a screwdriver, etc.Standard Price: MYR 38.99- Days to Ship: 2 Day(s) or more -
Tabletop base Separated type, Knurled type
MISUMI
- Tabletop Leveling Mounts -Separate Type / Knurled Type
- Part number for series including of KFB (Separate Type) and KFBR (Knurled Type).
- Product type: Mounting.
- Tabletop Leveling Mounts Main Body Material: ABS Resin and Polyamide.
- Bottom Material: Polyurethane (For use with Polyamide body type)
- Bolt Material: SWRM Steel and Trivalent Chromate plating solution.
- Nominal of Thread size (M): 8, 10 and 12.
- Separable threads and pad are convenient for disposal.
- The Tabletop Leveling Mounts: RoHS compliant.- Volume Discount
Standard Price: MYR 11.55- Days to Ship: 4 Day(s) or more -
NABEYA BI-TECH
- FCM/FCF series Leveling adjuster with plastic pad.
- Part number for series including of FCM, FCM-G, FCF and FCF-G type.
- Threaded Material: Steel SUM22L.
- Thread Surface Treatment: Trivalent Chromate solution.
- Lock nut: S45C, trivalent chromate treatment
- Body Pad Material: Glass fiber reinforced nylon6 (Black color)
- The pad tilts up to 15°. Effective for use on slopes.
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 40, 50, 63, 80, 100 and 125 mm.Standard Price: MYR 29.22- Days to Ship: 5 Day(s) or more -
Leveling Foot (heavy load/ultra-heavy load type), FPM
NABEYA BI-TECH
Heavy load / super heavy load type leveling foot. The screw is made of steel. Outstanding durability.
[Features]
· Ideal for the leveling of transfer lines, etc.
· The pad can be tilted up to 15°.
· Effective for use on slopes.
· Thread diameters from M10 to M24 are available as standard.
· FPM-G and FPM-GH come with a rubber disk for slip prevention.
· FPM and FPM-G are heavy load types.
· FPM-H and FPM-GH are super heavy load types.
· Products with a pad diameter equal to or greater than ø80 have two hidden holes for anchor bolts and two guide holes for hole drilling.Standard Price: MYR 66.45- Days to Ship: 5 Day(s) or more -
Adjuster for Heavy Weight, With Rubber D-C-R
DAIWARASHI
A rubber equipped type adjuster for medium loads
[Features]
· Receiver features a chloroprene rubber coating.- CAD ：
- 2D
Standard Price: MYR 40.75- Days to Ship: 4 Day(s) or more -
Adjuster for Heavy Loads (Bearing Equipped) D-H
DAIWARASHI
An adjuster for heavy weights with a built-in thrust bearing
[Features]
· Suitable for the adjustment of heavy machinery.
· Stability is outstanding since a large diameter bolt is used.
· Smooth adjustments can be made even for non-heavy machinery.- CAD ：
- 2D
Standard Price: MYR 190.43- Days to Ship: 4 Day(s) or more -
Standard Receiver Type Adjuster D-A/D-B
DAIWARASHI
The most general standard type adjuster
[Features]
· The screw shaft rotates and tilts somewhat.
· A standard type that can be used as the adjustment bolt for any machinery.
· The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.
· D-A supports screw diameters M16 and M20, and D-B supports screw diameter M12.- CAD ：
- 2D
Standard Price: MYR 17.69- Days to Ship: 4 Day(s) or more -
WAKISANGYO
[Features]
· Ultra-durable and can be used for desks, furniture, and much more.
[Applications]
Used to adjust and stabilize wobbly desks and chairsStandard Price: MYR 16.58- Days to Ship: 8 Day(s) -
Adjustment Pads/Space Saving Type
MISUMI
- Leveling Mounts-Space Saving Type.
- The part number is NFJNCT.
- Type of product : Adjusting Bolt.
- Material: SS400 steel Equivalent.
- Leveling Mounts Surface Treatment: Trivalent Chromate Solution.
- Nominal of Thread size (M): 8, 10, 12 and 16.
- Thread Length size: 50, 75, 100, 125, 130, 150 and 180 mm.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.
- Carbon steel is chromate plated for bright appearance and better corrosion resistance.- Volume Discount
Standard Price: MYR 25.31- Days to Ship: 4 Day(s) or more -
MISUMI
- Economy Leveling Mounts.
- The part number is MAJB.
- Type of Leveling Mounts: Adjusting Bolt.
- Body Material: SWRCH Carbon Steel.
- Surface Treatment: Trivalent Chromate solution.
- Nominal of Thread size (M): 16.
- Screw Thread Length: 75 and 150 mm.
- Allowable Load: 3.7 KN.
- The screw and the pad are one piece.
- Carbon steel is chromate plated for bright appearance and better corrosion resistance.
- In some applications, adjustable pads are used to level, support, or align different components or machinery.- Volume Discount
Standard Price: MYR 12.68- Days to Ship: 2 Day(s) -
Tabletop Leveling Mounts/Grip Type
MISUMI
- Tabletop Leveling Mounts/Grip Type
- Product type: Mounting.
- The part number is NFBG.
- Main Body Material: Polyacetal plastic.
- Bottom Material: Elastomer rubber.
- Thread Material is SWCH steel.
- Thread Surface Treatment: Trivalent Chromate solution.
- Nominal of Thread size (M): 6, 8 and 10 (Coarse).
- Grip Body Color: Black and white.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.
- The product with a leveling function. Less slippery than the existing products.- Volume Discount
Standard Price: MYR 16.44- Days to Ship: 1 Day(s) or more -
Leveling Mounts - Space Saving - Pivot Type
MISUMI
- Leveling Mounts - Space Saving - Pivot Type
- The part number is HNFJR.
- Body Material: SS400 Carbon Steel.
- Body Surface Treatment: Trivalent Chromate solution.
- Nominal of Thread size (M): 8 and 12.
- Thread Length size: 20, 30, 50, 80 and 100 mm.
- HNFJR type the screw section can move Swivel Angle through 30°.
- Carbon steel is chromate plated for bright appearance and better corrosion resistance.
- Pivot Type are used for various applications where it is necessary to level and stabilize equipment or machinery.- Volume Discount
Standard Price: MYR 54.46- Days to Ship: 4 Day(s) or more -
Adjuster, Rubber Receiver Type D-G/D-GII
DAIWARASHI
An adjuster with a rubber-made base that is also optimal for slip prevention. Note: Please be advised that the model number in VONA has been changed from "D-G II" to "D-G2."
[Features]
· A rubber cover is used for the entire receiver, and an iron core is included inside.- CAD ：
- 2D
Standard Price: MYR 80.35- Days to Ship: 4 Day(s) or more -
Adjuster with Rubber for Heavy Weights (Bearings Mounted), D-H-R
DAIWARASHI
An adjuster equipped with rubber for medium loads featuring a built-in thrust bearing.
[Features]
· Since the receiver features a chloroprene rubber coating, there is no need to worry about it falling off, enabling it to be used with confidence.
· Groove processing is applied to the rear surface of the rubber to make it non-slippery.
· Effectively protects floors.- CAD ：
- 2D
Standard Price: MYR 252.24- Days to Ship: 2 Day(s) or more -
Adjuster for Heavy Weights (Long Screw Type), D-C-L/D-C-L and S
DAIWARASHI
A long screw adjuster with a wide adjustment range
[Features]
· Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
A limited quantity of 500 mm total length products are available for M16 and M20.
· D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- CAD ：
- 2D
Standard Price: MYR 59.22- Days to Ship: 4 Day(s) or more -
Adjuster for Heavy Weights (Wide Base Plate Type), D-CIII/D-CIII and S/D-CIII-W
DAIWARASHI
A wide base type adjuster for heavy weights that is stable and that can distribute the load to the floor. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
[Features]
· The receiver of the stainless steel D-C III is a forged item.
· D-C III S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- CAD ：
- 2D
Standard Price: MYR 60.16- Days to Ship: 2 Day(s) or more -
Adjuster, with Rubber for Heavy Loads, (Equipped with Thrust Bearing), WD-C-R
DAIWARASHI
A rubber type adjuster for medium loads with a thrust bearing that enables smooth leveling
[Features]
· Receiver features a chloroprene rubber coating.- CAD ：
- 2D
Standard Price: MYR 65.21 Days to Ship: 2 Day(s) -
Standard Receiver Adjuster With Plastic D-AII/D-BII
DAIWARASHI
A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
[Features]
· Does not stain or damage floors since a special plastic is molded into the receiver.
· The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
· Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.- CAD ：
- 2D
Standard Price: MYR 25.94- Days to Ship: 4 Day(s) or more -
Adjuster, Standard Receiver, Small Diameter Type D-F/D-F-C
DAIWARASHI
An adjuster whose screw and base have small diameters
[Features]
· Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
· Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
· A light load type with a receiver diameter that is also small.
· Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.- CAD ：
- 2D
Standard Price: MYR 12.83- Days to Ship: 4 Day(s) or more -
DAIWARASHI
A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."
[Features]
· A special adjuster for walls.
· Please use together with D-D II.
· Please use accessories such as hex nuts, etc.
· The portion that makes contact with the wall is folded.
· As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
· In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.
· Please refer to the drawings for use.- CAD ：
- 2D
Standard Price: MYR 19.10- Days to Ship: 4 Day(s) or more -
WAKISANGYO
[Features]
High-grade adjuster made with zinc die-casting.
[Applications]
Used to stabilize wobbly desks and chairsStandard Price: MYR 32.69- Days to Ship: 8 Day(s) or more -
WAKISANGYO
[Features]
· Sturdy felt prevents scratches on the floor.
· Reduces noisy vibrations when moving furniture.
[Applications]
· Used to adjust and stabilize wobbly desks and chairsStandard Price: MYR 58.47- Days to Ship: 8 Day(s) -
WAKISANGYO
[Features]
Made up of 2 parts, so the upper part (integrated with the bolt) can rotate independently of the base. This enables easy height adjustment without needing to lift the furniture.
[Applications]
Used to adjust and stabilize desks and chairsStandard Price: MYR 35.23- Days to Ship: 8 Day(s) -
WAKISANGYO
[Features]·Heavy objects can also be level-adjusted with a wrench. [Applications]·For desks, chairs, etc.
Standard Price: MYR 30.22- Days to Ship: 15 Day(s) -
SUN Adjusting Bolt for Heavy Weight S-W Series
SUN FASTENER
[Reliable quality]Adjuster leveling mount of Sun Fastener parts.
It is a SUN Adjust Bolt leveling mount for heavy items.
■Strike plate diameter: ø60
■Thread diameter: M12/M16/M20Standard Price: MYR 52.53- Days to Ship: 5 Day(s) or more -
Standard Type Adjuster - JA Type
Jmec
Since a hex nut is press-fitted in from the bottom of the catch plate, mounting can be performed easily using an impact wrench, etc.
Standard Price: MYR 19.87- Days to Ship: 14 Day(s) or more -
Standard Price: MYR 30.64- Days to Ship: 14 Day(s) or more -
Jmec
Since a hex nut is press-fitted in from the bottom of the catch plate, mounting can be performed easily using an impact wrench, etc. The catch plate has a special non-slip resin baked onto it so it does not dirty the floor or become scratched.
Standard Price: MYR 29.00- Days to Ship: 14 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Thread Length L1(mm) |
| Nominal of Thread M(mm) |
| Type |
| Main Body Height E(mm) |
| Adjusting Bolt Shape Type |
| Body Material |
| Properties |
| Bottom Rubber Material |
| Mounting Shape Type |
| Thread Material |
| Main Body Surface Treatment |
| Swivel Angle θ(deg) |
| Height Adjusting Handle |
| Thread Surface Treatment |
| Swivel Mechanism |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NABEYA BI-TECH | DAIWARASHI | MISUMI | MISUMI | DAIWARASHI | DAIWARASHI | MISUMI | DAIWARASHI | MISUMI | MISUMI | MISUMI | MISUMI | NABEYA | MISUMI | NABEYA BI-TECH | NABEYA BI-TECH | DAIWARASHI | DAIWARASHI | DAIWARASHI | WAKISANGYO | MISUMI | MISUMI | MISUMI | MISUMI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | WAKISANGYO | WAKISANGYO | WAKISANGYO | WAKISANGYO | SUN FASTENER | Jmec | Jmec | Jmec |
| Product Series | Adjuster, Anchor Fixing, With Non-Shake Thread Section, D-J-EII | Adjuster with Rubber for Heavy Weights (Bearings Mounted), D-H-R | Adjuster for Heavy Weights (Long Screw Type), D-C-L/D-C-L and S | Adjuster for Heavy Weights (Wide Base Plate Type), D-CIII/D-CIII and S/D-CIII-W | Adjuster, with Rubber for Heavy Loads, (Equipped with Thrust Bearing), WD-C-R | ||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
| Days to Ship | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) | 4 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) | 4 Day(s) or more | 2 Day(s) | 1 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 2 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 15 Day(s) | 5 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more |
| Thread Length L1(mm) | 30 ～ 300 | 75 ～ 300 | 75 ～ 180 | 75 ～ 180 | 50 ～ 180 | 40 ～ 125 | 50 ～ 200 | 75 ～ 130 | 20 ～ 100 | 50 ～ 200 | 130 ～ 150 | 14 ～ 25 | 50 ～ 180 | 14 ～ 40 | 60 ～ 180 | - | 60 ～ 130 | 75 ～ 180 | 24 ～ 32 | 40 ～ 125 | 43 ～ 198 | 50 ～ 200 | 100 ～ 200 | 50 ～ 200 | 9 ～ 28 | 50 ～ 180 | 75 ～ 150 | 25 ～ 32 | 20 ～ 100 | 100 ～ 150 | 150 ～ 200 | 200 ～ 300 | 100 ～ 200 | 100 | 75 ～ 200 | 50 ～ 100 | 75 ～ 150 | 21 ～ 26.5 | 17.5 ～ 31.5 | 24 ～ 26 | 27.5 ～ 52.5 | 75 ～ 250 | 100 ～ 180 | 100 ～ 180 | 100 ～ 180 |
| Nominal of Thread M(mm) | 5 ～ 20 | 10 ～ 24 | 10 ～ 20 | 10 ～ 20 | 8 ～ 20 | 8 ～ 16 | 12 ～ 20 | 10 ～ 16 | 8 ～ 12 | 12 ～ 20 | 16 | 6 ～ 12 | 12 ～ 16 | 5 ～ 10 | 10 ～ 20 | 10 ～ 16 | 10 ～ 16 | 16 ～ 20 | 8 ～ 12 | 8 ～ 16 | 10 ～ 24 | 12 ～ 20 | 20 ～ 30 | 12 ～ 20 | 6 ～ 8 | 8 ～ 16 | 16 | 6 ～ 10 | 8 ～ 12 | 16 | 24 ～ 30 | 12 ～ 24 | 16 ～ 30 | 16 | 12 ～ 16 | 8 ～ 10 | 12 ～ 16 | 6 ～ 10 | 6 ～ 10 | 8 | 8 ～ 10 | 12 ～ 20 | 12 ～ 20 | 12 ～ 20 | 12 ～ 20 |
| Type | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Mounting | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Mounting | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Mounting | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt |
| Main Body Height E(mm) | 5.4 ～ 20 | 18 ～ 20 | 18 | 21.5 ～ 23 | 15 ～ 25 | 4 ～ 8.5 | 17 | 22 ～ 32 | 17.7 ～ 23 | 17 ～ 19 | 19 | 9.7 ～ 16 | 17 | 7 ～ 9.5 | 19 ～ 27 | 39 ～ 44.5 | 18 | 17 ～ 21 | 11 ～ 54 | 4 ～ 8.5 | 17.5 ～ 29 | 22 | 29.5 ～ 36.5 | 15 ～ 18 | 8.5 ～ 10.5 | 11 ～ 20 | 6 | 16.5 | 28.2 ～ 35.4 | 30 | 37 ～ 42 | 17 ～ 22 | 22 ～ 23 | 22 | 18 ～ 22 | 12.5 ～ 13.5 | 14 ～ 18 | 10.5 ～ 12.5 | 9.5 ～ 11 | 15 ～ 23 | 11 ～ 12 | 101 ～ 281 | 14 ～ 18 | 16 | 16 ～ 23 |
| Adjusting Bolt Shape Type | Standard | - | Anchor Bolt Mounting Type | Rubber Foot & Anchor Bolt Fixing Type | Rubber Foot Type | Standard | Standard | - | Standard | Rubber Foot & Anchor Bolt Fixing Type | Rubber Foot & Anchor Bolt Fixing Type | - | Rubber Foot & Anchor Bolt Fixing Type | - | Rubber Foot Type | Tapped Socket Type | - | Standard | - | Standard / Rubber Foot Type | Standard / Rubber Foot Type / Anchor Bolt Mounting Type / Rubber Foot & Anchor Bolt Fixing Type | Rubber Foot Type | Built-in Bearing Type | Standard | Standard | - | - | - | - | Rubber Foot Type | Built-in Bearing Type | Standard | Standard | Built-in Bearing Type | Standard | Standard | Anchor Bolt Mounting Type | Rubber Foot Type | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Body Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Polypropylene | Other Plastic | Nylon 6 | Nylon 6 | Stainless Steel / Cast Iron | Polyamide / Plastic | Nylon 6 | Nylon 6 | Steel | Steel | Steel | Polyethylene / Other Plastic | Steel | Steel | Other Plastic | - | Synthetic Rubber (EPDM Synthetic Rubber) | Steel | Cast Iron | Cast Iron | Steel | Steel | Steel | Steel | Zinc Alloy | Plastic | Nylon 6 | Nylon 6 | Steel | Steel | Steel | Steel |
| Properties | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Vibration Control | Standard | Standard | Vibration Control | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Impact Resistance | Standard | Standard | Standard | Standard | Vibration Control | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Bottom Rubber Material | - | - | - | - | Chloroprene Rubber / Elastomer / Neoprene Rubber / Others / Synthetic Rubber | - | - | - | - | - | - | - | - | - | Nitrile Rubber | - | - | - | - | - | - | Chloroprene Rubber | - | - | - | - | - | - | - | - | Chloroprene Rubber | - | - | Chloroprene Rubber | ABS Resin | ABS Resin | - | ABS Resin | - | - | - | - | - | - | - |
| Mounting Shape Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel / Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | - | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Main Body Surface Treatment | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | - | Trivalent Chromate | - | - | Not Provided | - | Trivalent Chromate | - | Not Provided | Not Provided | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | - | Trivalent Chromate | Trivalent Chromate | - | - | Not Provided | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Not Provided | Not Provided | Not Provided | Not Provided | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate |
| Swivel Angle θ(deg) | - | - | - | - | - | 30 | - | 15 | 14 | - | - | 15 | - | - | 15 | 15 | 15 | - | - | 30 | 30 | - | - | - | - | - | - | - | 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Height Adjusting Handle | Not Provided | Not Provided / Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided |
| Thread Surface Treatment | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate |
| Swivel Mechanism | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Provided | Provided | Not Provided | Not Provided | Provided | Not Provided | - | Provided | Provided | Provided | Not Provided | - | Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Loading...
Configure
Specification/Dimensions
-
Thread Length L1(mm)
- 9
- 11.5
- 11.6
- 14
- 16
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 21.5
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 39.5
- 40
- 41
- 42
- 43
- 45
- 49.5
- 50
- 51
- 51.5
- 52
- 52.5
- 53
- 54
- 56
- 58
- 59.5
- 60
- 61
- 62
- 63
- 65
- 66
- 67.5
- 68
- 69.5
- 70
- 71
- 71.5
- 72
- 73
- 75
- 78
- 80
- 85
- 90
- 91
- 95
- 98
- 99.5
- 100
- 101.5
- 108
- 110
- 114
- 117.5
- 120
- 122
- 124
- 125
- 126
- 127
- 129
- 130
- 132
- 132.5
- 135.5
- 136
- 138
- 142
- 144
- 145
- 148
- 150
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 162
- 162.5
- 165.5
- 168
- 170
- 172
- 174
- 175
- 176
- 177
- 179
- 180
- 182
- 182.5
- 184
- 185.5
- 186
- 198
- 200
- 206
- 207
- 209
- 210
- 212
- 212.5
- 215.5
- 220
- 250
- 280
- 300
[80-300/10mm Unit(s)]
-
Nominal of Thread M(mm)
-
Type
- Adjusting Bolt
- Mounting
- Precision Instrument
- Others
- Adjusting Screw with Rubber Grommet
-
Main Body Height E(mm)
- 4
- 5
- 5.4
- 6
- 7
- 8
- 8.5
- 9
- 9.5
- 9.7
- 9.8
- 10
- 10.5
- 11
- 11.2
- 11.5
- 12
- 12.5
- 13
- 13.5
- 13.7
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 17.7
- 18
- 18.5
- 19
- 20
- 20.5
- 20.7
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 26
- 27
- 27.5
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31
- 31.5
- 32
- 32.5
- 33
- 33.2
- 34
- 34.5
- 35
- 35.4
- 35.5
- 36
- 36.5
- 37
- 37.5
- 39
- 40
- 41
- 42
- 42.5
- 43
- 44
- 44.5
- 45
- 46
- 46.5
- 47
- 48.5
- 50
- 51
- 52
- 53
- 54
- 55
- 55.5
- 56
- 57
- 58
- 60
- 60.5
- 61
- 62
- 62.5
- 63
- 64
- 64.5
- 65
- 66
- 67
- 67.5
- 69
- 70
- 70.5
- 71
- 72
- 73
- 75
- 76
- 76.5
- 77
- 77.5
- 78.5
- 79
- 80
- 81
- 82.5
- 83
- 83.5
- 84.5
- 85
- 85.5
- 90
- 91
- 92
- 93
- 94
- 95
- 97
- 99.5
- 100
- 101
- 101.5
- 102.5
- 104
- 105
- 106
- 106.5
- 107
- 108
- 108.5
- 109
- 110
- 111
- 112
- 112.5
- 113.5
- 114.5
- 115
- 116
- 117
- 117.5
- 119
- 119.5
- 121
- 122.5
- 123
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 140.5
- 142
- 143
- 145
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 154.5
- 155
- 156
- 156.5
- 157
- 158
- 158.5
- 159
- 160
- 160.5
- 161
- 162
- 163
- 163.5
- 165
- 168
- 170
- 173
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 184.5
- 185
- 186
- 186.5
- 187
- 188
- 188.5
- 189
- 190
- 190.5
- 192
- 193
- 193.5
- 195
- 195.5
- 198
- 200
- 207
- 208
- 210
- 211
- 214
- 216.5
- 217
- 220
- 222
- 225
- 225.5
- 227
- 228
- 230
- 231
- 232
- 234
- 234.5
- 235
- 236
- 236.5
- 237
- 238
- 238.5
- 240
- 242
- 243
- 243.5
- 245
- 245.5
- 248
- 250
- 281
- 330
- 400
- 500
- 600
-
Adjusting Bolt Shape Type
-
Body Material
-
Properties
- Standard
- Corrosion Resistance
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Vibration Control
- Impact Resistance
- Electrical Conductivity
-
Bottom Rubber Material
-
Mounting Shape Type
-
Thread Material
-
Main Body Surface Treatment
-
Swivel Angle θ(deg)
-
Height Adjusting Handle
-
Thread Surface Treatment
-
Swivel Mechanism
Narrow search by specifying Manufacturer
-
- DAIWARASHI (15)
- WAKISANGYO (5)
- Jmec (4)
- NABEYA BI-TECH (3)
- NABEYA (1)
- SUN FASTENER (1)
- HIKARI (0)
- RICHENGINEERING (0)
- GIFU SANKEN KOGYO (0)
- IWATA MFG (0)
- SHIMIZU (0)
- 999SHIMANO (0)
- YAHATA (0)
- NANSIN (0)
- OHNISHI MFG (0)
- KURASHIKI KAKO (0)
- OHNORUBBER (0)
- TAKIGEN (0)
- IMAO CORPORATION (0)
- TRUSCO NAKAYAMA (0)
CAD
-
- 2D
- 3D
Related Categories to Adjuster Bolt
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy