(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 9/2/2025 to 7:00 (MYT) 10/2/2025. We apologize for the inconvenience.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Transparent Plastic Plates, Plastic Cover Panels（Color：Transparent）
| Days to Ship |
|
|---|
-
MISUMI
[Standard large quantity available] For standard sizes and hole-machined types from 21 to 100 pieces, a 15% discount is available without the need for an estimate. [Standard large quantity available] For side milling cutters of 11 to 20 pieces, a 5% discount is available without the need for an estimate.
Days to Ship: 6 Day(s) or more -
MISUMI
[Standard large quantity available] 10% discount for 21 to 100 pieces without the need for an estimate.
Days to Ship: 3 Day(s) or more -
MISUMI
Excels in chemical resistance and flame retardance, and superior in cost-effectiveness among anti-static materials.
Days to Ship: 6 Day(s) or more -
MISUMI
[Standard large quantity available] 15% discount for 21 to 100 pieces, no estimate required.
Days to Ship: 10 Day(s) or more -
TAKIRON
Hard PVC plate optimal for a wide range of applications. Quoted from the 2013 Takiron plate comprehensive catalog.
[Features]
· Proven record having been adopted as the first T type in Japan.
· Extrusion plate with high thickness accuracy.
· Little loss of gloss or surface peeling even during heat processing. Long sizes are also possibleDays to Ship: 8 Day(s) or more -
Acrylic Plates - Economy, Curved Panels/Extruded Plates
MISUMI
[Features]·It is cheaper than cast plates · Extruded plate type acrylic plates.
Days to Ship: 4 Day(s) or more -
PVC-free Material, Polycarbonate Plate PC (Transparent)
TAKIRON
Achieves superior impact strength and glass transparency. Note: Quoted from the 2013 Takiron comprehensive catalog.
[Features]
· Polycarbonate plates are made from materials with superior impact resistance, even among plastics.
· Plastic with a transparency equal to glass that refutes the common belief that transparent materials are easy to break.
· Possesses the highest level of impact-resistance strength while using transparent materials with approximately 20 times the strength of hard vinyl chloride and approximately 40 times the strength of acrylic.
· Superior light permeability rate of 85% for 5 mm transparent plate, the same transparency as high grade plate glass.
· Low thermal conductivity (1/5th of glass) and superior heat retention qualities. Useful for insulation.
· Can be used in a wide range of temperatures, from -40°C to +120°C.
· 1 mm thickness and resistant to high voltages of up to 30,000 volts. More than twice the insulating value as Bakelite. Optimal as electric insulation material.
· Weather-resistant grade that prevents yellowing and is barely affected by direct sunlight, wind, rain, temperatures, etc., when compared to other plastic materials. Quality can be selected based on application.
[Polycarbonate Processing Features]
1. Little change in load (creep) and easy drilling and cutting.
2. Vacuum forming and heat bending possible.
3. Cold forming by bending into a curve under temperatures below room temperature is possible.
· Food and Hygiene Law / UL certified product / Railway car compliance certified product.Days to Ship: 6 Day(s) or more -
Extra Thin Resin Sheets/Polyacetal/Fluororesin/Polycarbonate
MISUMI
Thin Type Plastic Sheets with 0.1~1.0 thickness. Polyacetal, Fluororesin or Polycarbonate can be selected as the product material.
Days to Ship: 6 Day(s) or more -
MISUMI
· Thin plates from 0.5 to 2.0 mm can be specified in increments of 1 mm.
Days to Ship: 6 Day(s) or more -
Non-PVC Material PET Plates (Amorphous Polyester)
TAKIRON
High functioning grade optimal for electronics, food and other industrial applications. Quoted from 2013 Takiron plate comprehensive catalog.
[Features]
· Material with low combustion calories even for plastics that does not generate poisonous halogen gases when burnt.
· Possesses high strength based on Charpy impact testing that is approximately five times the initial strength of general acrylic.
· Can be made thinner than conventional products depending upon the application.
· Petech is self-extinguishing, as opposed to acrylics which are highly flammable.
· Certified for superior flame retardance. Passed the materials combustion test for railroad cars.
· Does not turn white even when cold bent. Punching of thin objects as thin as 1.5 mm possible, whereas such punching is not possible with acrylics.
· Easier to form at low temperatures than acrylics when heatedDays to Ship: 6 Day(s) or more -
ACRYSUNDAY
[Features]
· Acrysunday plate, transparent: Perfectly clear visibility of objects on the other site of the plate.
· Acrysunday plate, semi-transparent: When light strikes the back, the plate color brightens and clearly stands out.
· Acrysunday plate, non-transparent: Even if light strikes the back, there will be no coloringDays to Ship: 13 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Material |
| Color |
| Grade |
| Hole Machining |
| Continuous Operating Temperature (High Temperature)(℃) |
| Continuous Operating Temperature (Low Temperature)(℃) |
| Volume Resistivity Value(Ω･cm) |
| Flame Retardancy |
| Oil |
| Acid |
| Alkali |
| A/B Dimension Tolerance |
| Shape |
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | TAKIRON | MISUMI | TAKIRON | MISUMI | MISUMI | TAKIRON | ACRYSUNDAY |
| Product Series | Extra Thin Resin Sheets/Polyacetal/Fluororesin/Polycarbonate | ||||||||||
| CAD |
|
|
|
|
|
|
| ||||
| Days to Ship | 6 Day(s) or more | 3 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 13 Day(s) or more |
| Material | Acrylic | PET | Vinyl Chloride (PVC) | Polycarbonate (PC) | Vinyl Chloride (PVC) | Acrylic | Polycarbonate (PC) | Polycarbonate (PC) | Acrylic ～ Polycarbonate (PC) | PET | Acrylic |
| Color | Transparent | Transparent | Transparent | Transparent | Transparent | Transparent | Transparent | Transparent | Transparent | Transparent | Transparent |
| Grade | Standard / Antistatic | Standard / Antistatic | Antistatic | Standard / Antistatic / Abrasion Resistant | Standard | Standard / Antistatic | Standard | Standard | Standard | Standard | Standard |
| Hole Machining | 2 Holes, Horizontal ～ No Drilling Alteration | 2 Holes, Horizontal ～ No Drilling Alteration | 2 Holes, Horizontal ～ No Drilling Alteration | 2 Holes, Horizontal ～ No Drilling Alteration | No Drilling Alteration | 2 Holes, Horizontal ～ No Drilling Alteration | No Drilling Alteration | No Drilling Alteration | 2 Holes, Horizontal ～ No Drilling Alteration | No Drilling Alteration | No Drilling Alteration |
| Continuous Operating Temperature (High Temperature)(℃) | 80 to 100 | 55 to 70 | 55 to 70 | 80 to 100 | - | 55 to 70 | - | - | - | - | - |
| Continuous Operating Temperature (Low Temperature)(℃) | -30 | -15 | -30 | -30 | - | -30 | - | - | - | - | - |
| Volume Resistivity Value(Ω･cm) | ＞10^15 / ＞10^17 | ＞10^11 / ＞10^17 | - | ＞10^17 | - | ＞10^15 | - | - | - | - | - |
| Flame Retardancy | - | - | Equivalent to V-0 | - | - | - | - | - | - | - | - |
| Oil | ○ | ○ | ○ | ○ / × | - | ○ | - | - | - | - | - |
| Acid | ○ | - | ○ | - | - | ○ / ×～△ | - | - | - | - | - |
| Alkali | ○ | - | ○ | - | - | ○ | - | - | - | - | - |
| A/B Dimension Tolerance | ±1.0 / -0.2 to 0 / ±0.1 / 0 to +0.2 | ±1.0 | ±1.0 | ±1.0 | - | ±1.0 | - | - | - | - | - |
| Shape | No Hole Machining (Standard Type) / Number of Holes Selection Type (With 2H to 8H Holes) | No Hole Machining (Standard Type) / Number of Holes Selection Type (With 2H to 8H Holes) | No Hole Machining (Standard Type) / Number of Holes Selection Type (With 2H to 8H Holes) | No Hole Machining (Standard Type) / Number of Holes Selection Type (With 2H to 8H Holes) | - | No Hole Machining (Standard Type) / Number of Holes Selection Type (With 2H to 8H Holes) | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Material
-
Color
-
Grade
- Standard
- Antistatic
- Abrasion Resistant
-
Hole Machining
-
Continuous Operating Temperature (High Temperature)(℃)
- 55 to 70
- 80 to 100
-
Continuous Operating Temperature (Low Temperature)(℃)
- -15
- -30
-
Volume Resistivity Value(Ω･cm)
- ＞10^11
- ＞10^15
- ＞10^17
-
Flame Retardancy
- Equivalent to V-0
-
Oil
- ○
- ×
-
Acid
- ○
- ×～△
-
Alkali
- ○
-
A/B Dimension Tolerance
- ±1.0
- -0.2 to 0
- ±0.1
- 0 to +0.2
-
Shape
- No Hole Machining (Standard Type)
- Number of Holes Selection Type (With 2H to 8H Holes)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Transparent Plastic Plates, Plastic Cover Panels
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy