(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 23/2 to 7:00 (MYT) 24/2/2025. We apologize for the inconvenience.
  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

Screw-Hole-Related Tools(Screw size (Nominal):M45)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machinin ...Readmore

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.  ▲ Close

Search by specifying the lower class category

Days to Ship
  • All
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 3 Day(s) or Less
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Pointed Tap Series, General Purpose EX-POT

      Spiral Fluted Taps_SP

        Spiral Tap for General Application_EX-SFT

          Hand Taps_HT

            Model A Tap Series, Spiral Tap A-SFT

              Spiral Flute Tap (SKH)

                Spiral Pointed Taps_PO

                  Hand Tap HT for metric screws

                    Solid Die D for Metric Threads

                      Long Shank Hand Taps_LS-HT

                        Threading Round Die Series Pipe General Threading Round Die RD-S

                          Fluteless Tap (X Performer)_S-XPF

                            Spiral Fluted Taps for Stainless Steels_SU+SP

                              Short Spiral Fluted Taps, Deep Hole Use_S-SP

                              Brand

                              OSG

                              YAMAWA MFG

                              OSG

                              YAMAWA MFG

                              OSG

                              SKC

                              YAMAWA MFG

                              YAMAWA MFG

                              YAMAWA MFG

                              YAMAWA MFG

                              OSG

                              OSG

                              YAMAWA MFG

                              YAMAWA MFG

                              Product Series

                              Pointed Tap Series, General Purpose EX-POT

                              Spiral Fluted Taps_SP

                              Spiral Tap for General Application_EX-SFT

                              Hand Taps_HT

                              Model A Tap Series, Spiral Tap A-SFT

                              Spiral Flute Tap (SKH)

                              Spiral Pointed Taps_PO

                              Hand Tap HT for metric screws

                              Solid Die D for Metric Threads

                              Long Shank Hand Taps_LS-HT

                              Threading Round Die Series Pipe General Threading Round Die RD-S

                              Fluteless Tap (X Performer)_S-XPF

                              Spiral Fluted Taps for Stainless Steels_SU+SP

                              Short Spiral Fluted Taps, Deep Hole Use_S-SP

                              Days to Ship 5 Day(s) or more 8 Day(s) 5 Day(s) or more 8 Day(s) or more 5 Day(s) or more 7 Day(s) or more 8 Day(s) or more 9 Day(s) 7 Day(s) or more 8 Day(s) or more 5 Day(s) or more 5 Day(s) or more 7 Day(s) or more 7 Day(s) or more
                              Screw size (Nominal)M45M45M45M45M45M45M45M45M45M45M45M45M45M45
                              Screw TypesMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter
                              work materialMedium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]-Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]-Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○]
                              Pitch (P), Number of Threading(mm)1.5 ~ 4.51.5 ~ 4.51.5 ~ 4.51 ~ 4.54.54.51.5 ~ 4.54.51.5 ~ 4.51.5 ~ 4.51 ~ 4.54.54.54.5
                              Tool Material TypeVanadium High-Speed SteelHigh-speed steelVanadium High-Speed SteelHigh-speed steelVanadium High-Speed Steel-High-speed steelHigh-speed steelHigh-speed steelHigh-speed steelAlloy HSSPowder high-speed steelHigh-speed steelHigh-speed steel
                              Tap TypePoint tapSpiral TapSpiral TapHand TapSpiral TapSpiral TapPoint tapHand TapDieHand TapDieRoll tapSpiral TapSpiral Tap
                              Hole typeFor through holeFor blind holeFor blind holeFor through hole / For blind holeFor blind hole-For through holeFor through hole / For blind hole-For through hole / For blind hole-For through hole / For blind holeFor blind holeFor blind hole
                              Chamfer threads (Lcf)5P2.5P3P1.5P ~ 5P2.5P-5P1.5P ~ 5P-1.5P ~ 5P-2P2.5P2.5P
                              Coating TypeNon-Coated-Non-Coated-Other-----Non-CoatedTiCN--
                              Coating Y/NNANANANAAvailable-NANANANANAAvailableNANA
                              Overall Length (L)(mm)120 ~ 180180120 ~ 180180220-180180-300-220180180

                              Loading...

                              1. 1

                              Related Categories to Screw-Hole-Related Tools