(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 23/2 to 7:00 (MYT) 24/2/2025. We apologize for the inconvenience.
  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

MWI Series (Ultra Small)

MWI Series (Ultra Small)
  • Volume Discount

[Specifications]·A 45 mm × 55 mm space saving connector terminal block

  • c-UL
  • For Signal
  • Space-saving
  • Sensor
  • PLC

● Optimal for installation in locations where space is limited
● Equipped with general purpose MIL20 core connector input
● Captive screw terminal block for easy mounting and wire connection

Part Number

Configured Part Number is shown.

MWI-M20-TB20

Configured Specifications

ConnectorMIL connectorTerminal Block ScrewM3
Number of connector cores(Pole)20Mounting MethodWith DIN rail
Pitch Between Terminals(mm)7.62Supported equipmentPLC
Supported equipment manufacturerMitsubishi Electric / OmronRepresentative StandardCUL
Dimension vertical(mm)47Dimension width(mm)55
Dimension depth(mm)50Supported crimp terminalY Terminal / Round Terminal
Show More
Number of terminal block electrodes(Pole)20Terminal block screw typeSpring Up
RoHS10 - -
Show Less

Specification Table

ModelNumber of Poles
MWI-M20-TB2020

Overview of Specifications


· Check the specifications of the connector array of each device on equipment side before ordering.
Material
Terminal BlockPBT (Polybutylene terephthalate)
CasePPE (Polyphenylene ether)
SubstrateGE4F (Glass Epoxy)
Specifications
Rated insulation voltage24 V AC/DC
Rated Current1 A
Insulation Resistance1,000 MΩ or more (at 500 V DC megger)
Withstand Voltage2,000 V AC 60 Hz for 1 min (between grounds)
Terminal Block ScrewM3 × 6L (-in)
Tightening Torque0.5 to 0.8 N·m
Pitch Between Terminals7.62 mm
Terminal Block Conforming Wire1.25 mm2 / AWG 16 or less
Ambient Temperature−20°C to +55°C (When energized)
−30°C to +85°C (When off)
Ambient Humidity45% to 85%
ULE184879
Conforming Crimp Terminal
1.25-3
F1.25.-3
 
Connection Information
ModelNumber of PolesMounting Connector (Hirose) MaleRecommended harnessWeight (g)
MWI-M20-TB2020HIF3BA-20PA-2.54DSA71HIFS Series111
Part Number
MWI-M20-TB20
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHS

MYR 236.86

1 Piece(s)Available 4 Day(s) or more 10
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHS
  1. 1

Basic Information

Connector MIL connector Terminal Block Screw M3 Number of connector cores(Pole) 20
Mounting Method With DIN rail Pitch Between Terminals(mm) 7.62 Supported equipment PLC
Supported equipment manufacturer Mitsubishi Electric / Omron Representative Standard CUL Dimension vertical(mm) 47
Dimension width(mm) 55 Dimension depth(mm) 50 Supported crimp terminal Y Terminal / Round Terminal
Number of terminal block electrodes(Pole) 20 Terminal block screw type Spring Up

Please check the type/dimensions/specifications of the part MWI-M20-TB20 in the MWI Series (Ultra Small) series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)

Not a MISUMI customer yet? Register & enjoy 50% off your 1st order!* (*T&C apply.)

  • 7 Million Products
  • 2,000 Brands
  • Free CAD downloads
  • Quote/order any time