(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Fall Prevention Valve (Part Numbers)
Even if the work piece goes off position, it is possible to minimize the drop in original pressure in other circuits. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.
Japanese Only
Part Number
Configured Part Number is shown.
Fall Prevention Valve Specifications
Fall prevention valve external appearance
Fall prevention valve dimensional diagrams (for meter screws)
Fall prevention valve dimensional diagrams (for tapered screws for pipes)
Usable medium: Air
Operating pressure range: Positive pressure 0 to 0.7 MPa, negative pressure - 100 to 0 kPa
Minimum suction flow volume: M3-M3: 2 L/min (ANR) M4-M4, M5-M5: 5 L/min (ANR) M6-M6, M10-M10, 01-01: 13 L/min (ANR)
Operating temperature range: 0 to 60°C (no freezing)
Size table
| Format | M1 | M2 | A1 | A2 | B | L | G | ØP1 | ØP2 | Opposite Side H | Minimum Suction Volume Of Valve (I/min[ANR]) | Suction Volume of Valve After Operation (l/min[ANR]) | Effective Sectional Area (mm2) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Free Flow Side | ||||||||||||||
| ECVM3-M3 | M3 × 0.5 | M3 × 0.5 | 4.5 | 2.5 | 18.4 | 15.9 | 0.5 | 5.5 | 8 | 8 | 2 | 1.3 | 0.7 | 4.9 |
| ECVM4-M4 | M4 × 0.7 | M4 × 0.7 | 4.5 | 2.9 | 19.9 | 17 | 0.6 | 7.8 | 10 | 10 | 5 | 1.3 | 1.6 | 7.9 |
| ECVM5-M5 | M5 × 0.8 | M5 × 0.8 | 4.5 | 3 | 19.9 | 16.9 | 0.5 | 7.8 | 10 | 10 | 5 | 1.3 | 1.6 | 6.6 |
| ECVM6-M6 | M6 × 1 | M6 × 1 | 5 | 4 | 28.1 | 24.1 | 0.5 | 8.8 | 12 | 12 | 13 | 1.3 | 4.0 | 13 |
| ECVM10-M10 | M10 × 1.5 | M10 × 1.5 | 10 | 7.5 | 40 | 32.5 | 2.5 | 14 | 14 | 14 | 13 | 1.3 | 4.8 | 11 |
| ECV01-01 | Rc 1/8 | R1/8 | 8 | 8 | 33.5 | 29.5 | - | - | 14 | 14 | 13 | 1.3 | 4.8 | 10 |
Units: mm
Applicable Screw Size
| Meter Male And Female Screws | M3 × 0.5, M4 × 0.7, M5 × 0.8, M6 × 1, M10 × 1.5 |
|---|---|
| Tapered Male And Female Screws For Pipes | R1/8, Rc1/8 |
Operation explanations
Fall prevention valve operational state
When a work piece is separated from the suction pad, the air flow pushes the valve, closing the pathway.
When the valve operates, a small amount of air is sucked in through the small hole in the center of the valve.
Work suction state
The suction flow of the vacuum lowers when the water adheres to a vacuum pad so that the valve is pushed up by the spring strength, opening a suction path between the valve and the product body.
Vacuum Generator
When using a vacuum generator, or when using a vacuum pump for multiple vacuum pads, it is possible to prevent trouble by automatically reducing suction when workpieces are not in contact with the pad frame or a non-critical number of workpieces have separated from pads, or lowering the level of vacuum within the system as a whole, thus stopping operations.
When adopting this system, ensure that the system allows cases where a number of items that would interfere with transport when pads are separated to be deemed unacceptable and that safety measures are employed.
Refer to the catalog for information on specifications for fall prevention and replacement elements other than those above, as well as safety precautions.
| Part Number |
|---|
| ECV01-E |
| ECV01-R |
| ECV01-S |
| ECV01-V |
| ECV02-E |
| ECV02-R |
| ECV02-S |
| ECV02-V |
| ECV03-E |
| ECV03-R |
| ECV03-S |
| ECV03-V |
| ECVM5-M5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Type (Fall Prevention Valve) | Pad Side Female Thread Size | Vacuum generator (holder) side threaded size | Fall prevention valve type | Element type |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 6.62 | 10 Piece(s) | 9 Day(s) or more | 10 | Elements For Replacement | - | - | ECVM3-M3 | Filter | ||
MYR 8.22 | 10 Piece(s) | 9 Day(s) or more | 10 | Elements For Replacement | - | - | ECVM3-M3 | Stopper | ||
MYR 6.62 | 10 Piece(s) | 9 Day(s) or more | 10 | Elements For Replacement | - | - | ECVM3-M3 | Spring | ||
MYR 12.28 | 10 Piece(s) | 9 Day(s) or more | 10 | Elements For Replacement | - | - | ECVM3-M3 | Valve Body | ||
MYR 6.62 | 10 Piece(s) | 9 Day(s) or more | 10 | Elements For Replacement | - | - | ECVM4-M4, ECVM5-M5 | Filter | ||
MYR 8.22 | 10 Piece(s) | 9 Day(s) or more | 10 | Elements For Replacement | - | - | ECVM4-M4, ECVM5-M5 | Stopper | ||
MYR 6.62 | 10 Piece(s) | 9 Day(s) or more | 10 | Elements For Replacement | - | - | ECVM4-M4, ECVM5-M5 | Spring | ||
MYR 12.28 | 10 Piece(s) | 9 Day(s) or more | 10 | Elements For Replacement | - | - | ECVM4-M4, ECVM5-M5 | Valve Body | ||
MYR 6.62 | 10 Piece(s) | 9 Day(s) or more | 10 | Elements For Replacement | - | - | ECVM6-M6, ECVM10-M10, ECV01-01 | Filter | ||
MYR 8.22 | 10 Piece(s) | 9 Day(s) or more | 10 | Elements For Replacement | - | - | ECVM6-M6, ECVM10-M10, ECV01-01 | Stopper | ||
MYR 6.62 | 10 Piece(s) | 9 Day(s) or more | 10 | Elements For Replacement | - | - | ECVM6-M6, ECVM10-M10, ECV01-01 | Spring | ||
MYR 12.28 | 10 Piece(s) | 9 Day(s) or more | 10 | Elements For Replacement | - | - | ECVM6-M6, ECVM10-M10, ECV01-01 | Valve Body | ||
MYR 60.70 | 1 Piece(s) | 2 Day(s) | - | Main Body | M5×0.8 | M5×0.8 | - | - |
Loading...
Basic Information
| Pad Type | Related Components |
|---|
Specification/Dimensions
-
Type (Fall Prevention Valve)
- Elements For Replacement
- Main Body
-
Pad Side Female Thread Size
- M5×0.8
-
Vacuum generator (holder) side threaded size
- M5×0.8
-
Fall prevention valve type
- ECVM3-M3
- ECVM4-M4, ECVM5-M5
- ECVM6-M6, ECVM10-M10, ECV01-01
-
Element type
- Filter
- Spring
- Stopper
- Valve Body
-
type
- ECV-01
- ECV-02
- ECV-03
- ECVM
-
CAD
- 2D
Days to Ship
-
- All
- 2 Day(s) or Less
- 9 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Vacuum Pad, Standard Type, VPA, One-touch Fitting Type
- Vacuum Pad, Soft Bellows Type, VPD, Barb Fitting Type
- Vacuum Pad, Soft Bellows Type, VPD, One-touch Fitting Type
- Vacuum Pad, Soft Bellows Type, VPHEW, One-touch Fitting Type
- Vacuum Pad, Suction Mark Prevention Type, VPD, Barb Fitting Type
- Vacuum Pad, Suction Mark Prevention Type, VPMB, Barb Fitting Type
- Oval Pads Single Unit: PWG
- Pad with Included Fitting and Fixing Bracket / PUTKB / PUYKB Bracket
Customers Who Viewed This Item Also Viewed
-
-
-
Vacuum Pad, Bellows Type, VPA, One-touch Fitting TypePISCO
Standard Price : MYR 71.56-
Days to Ship : 2 Day(s) or more
-
Vacuum Pad, Long Stroke Bellows Type, VPC, One-touch Fitting Type with CoverPISCO
Standard Price : MYR 105.55-
Days to Ship : 4 Day(s) or more
-
Vacuum Pad, Sponge Type, Pad RubberPISCO
Standard Price : MYR 41.45-
Days to Ship : 1 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy