(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
In-Line Type Ribbon Cable Connector (HIF3B Relay Type) (Part Numbers)
Can be used for cable-to-cable wiring inside machinery. The HIF3B series socket is also compatible with the HIF3A series.
Japanese Only
Part Number
Configured Part Number is shown.
In-line Type Ribbon Cable Connector (HIF3B Relay Type)
HIF3BA-PD Series
Specifications of HIF3BA-PD Series In-Line Male Connector For ID
Product Standards
| Rating | Rated current: 1 A Rated voltage: 200 V AC | Operating temperature range: -55 to +85°C (Note 1) Operating humidity range: 40 to 80% | Storage temperature range -10 to +60°C (Note 2) Storage humidity range 40 to 70% (Note 2) |
|---|
| Item | Standard | Conditions |
|---|---|---|
| 1. Insulation resistance | 1,000 MΩ or more | Measure at 500 V DC |
| 2. Withstand voltage | There shall be no flashover or dielectric breakdown. | Energize at 650 V AC rms for 1 min. |
| 3. Contact resistance | 15 mΩ or less | Measure at 0.1 A |
| 4. Vibration resistance | There shall be no electrical discontinuity for 1 μs or greater. | 10 to 55 Hz, Single amplitude: 0.75 mm, Three directions, 2 hours |
| 5. Humidity resistance | Insulation resistance: 1,000 MΩ or more | Leave at temperature 40°C ±2°C and humidity 90 to 95% for 96 hours |
| 6. Temperature cycle | There shall be no cracking or abnormalities with any of the parts. | (-65°C: 30 mins. > 15 to 35°C: Max. 5 mins. > 125°C: 30 mins. > 15 to 35°C: Max. 5 mins.) 5 cycles |
| 7. Durability (Mating / Un-mating) | Contact resistance: 15 mΩ or less | 500 times |
(Note 1) This includes temperature increases caused by the flow of current.
(Note 2) The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
Materials
| Part Name | Materials | Finish | Note |
|---|---|---|---|
| Insulator | PBT resin | Black | UL94V-0 |
| Plug contact | Beryllium copper | Nickel plating + gold plating | - |
Product Outline Drawing And Dimensions
Plug
Plug
HIF3BA-PD Series In-Line Male Connector For ID dimensional drawing
- (Note 1) (Note 2): Because the number of slots with polarity vary depending on the product, contact VONA Customer Service (0120-343-256) for details. Only the 10-contact model does not have a polarity key mounting section.
- (Note 3): Dimensions shown in parentheses are for 60- and 64-contact models.
- (Note 4): Be aware that although the lock shape of the HIF3BAE-60PD-2.54R-MC is partially different, its only mating partner is HIF3A.
Connection Method
When using with cable such as twisted cable or slitted cable, because the cable pitch may differ slightly depending on the cable manufacturer, it may not be possible to complete wiring. In such cases, please contact the cable manufacturer.
AO Type
Front view
Side cross-sectional view
BO Type
Front view
Side cross-sectional view
CO Type
Front view
Side cross-sectional view
DO Type
Front view
Side cross-sectional view
| Part Number |
|---|
| HIF3BA-20PD-2.54R-MC |
| HIF3BA-34PD-2.54R-MC |
| HIF3BA-40PD-2.54R-MC |
| HIF3BB-50PD-2.54R-MC |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Number Of Pins |
|---|---|---|---|---|---|---|
MYR 41.78 | 1 Piece(s) | 2 Day(s) | 10 | 20 | ||
MYR 51.06 | 1 Piece(s) | 4 Day(s) or more | 10 | 34 | ||
MYR 51.91 | 1 Piece(s) | 2 Day(s) | 10 | 40 | ||
MYR 64.61 | 1 Piece(s) | 4 Day(s) or more | 10 | 50 |
Loading...
Basic Information
| Connector Shape | Rectangular | Connector series initials | M/N/O | M/N/O | MIL |
|---|---|---|---|---|---|
| Applicable pin/contact | Male | Connector Type | Cable to cable | Rated Current(A) | 1 |
| Allowable Voltage(V) | AC200 | Wiring Method | Pressure Welding | Connection direction | Straight |
| Representative Standard | UL | Conforming Cable | UL2651 AWG28 flat cable (x7/φ 0.127mm, outer sheath diameter 0.8 to 1.0 mm) | Conforming cable outer diameter(mm) | φ 0.8 to 1.0 |
| Polarity Guide/Slot | Center 1 | Operating Temperature Range(°C) | -55 to +85 | Terminal pitch(mm) | 2.54 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Misumi, Waterproof, Single-Lever Pedestal (for Panel Mount)
- D-sub connectors EMI Shielded Pressure Weld Stamping Terminal(Short Lug)
- Dedicated PLC D-Sub Connector with Resin Hood
- Press-fit MIL Hooded Connector for Discrete Wires
- HE Series, Universal Connector
- 1.25‑mm Pitch Low-Profile Type Crimp Connector, DF14 Series
- 3.5‑mm Pitch 2-Row Connector For Small Internal Power Supplies, MDF6 Series
- SCR Connector Wire Mount Receptacle
Customers Who Viewed This Item Also Viewed
-
HIF3B Series MIL Standard-Compliant Ribbon Cable ConnectorHIROSE ELECTRIC
Standard Price : MYR 3.61-
Days to Ship : 1 Day(s) or more
-
MIL Press-fit Male Extension ConnectorMISUMI
Standard Price : MYR 57.09-
Days to Ship : 2 Day(s) or more
-
MIL Press-fit Female Connector (Without Lock)MISUMI
Standard Price : MYR 9.61-
Days to Ship : 1 Day(s) or more
-
MIL Connector Female Crimped Housing (without Lock)MISUMI
Standard Price : MYR 5.54-
Days to Ship : 1 Day(s) or more
-
Half-Pitch Multi-Function 2-Piece Connector, FX2 SeriesHIROSE ELECTRIC
Standard Price : MYR 10.10-
Days to Ship : 4 Day(s) or more
-
Discrete Wire Press Connector - XG5 (Discrete Wire Press Connector)OMRON
Standard Price : MYR 4.92-
Days to Ship : 2 Day(s) or more
-
HIF3F Series 2.54‑mm Pitch Box Type Pin HeaderHIROSE ELECTRIC
Standard Price : MYR 8.67-
Days to Ship : 3 Day(s) or more
-
Contact Crimp Tool For HIF3B SeriesHIROSE ELECTRIC
Standard Price : MYR 2,190.66-
Days to Ship : 4 Day(s) or more
-
Cover Case for HIF3B SeriesHIROSE ELECTRIC
Standard Price : MYR 22.24-
Days to Ship : 4 Day(s) or more
-
2.54-mm Pitch Low Profile Connector, HIF3FB and HIF3FC SeriesHIROSE ELECTRIC
Standard Price : MYR 5.63-
Days to Ship : 3 Day(s) or more
-
MIL Connector PCB Angle Male Connector (Lever Model)MISUMI
Standard Price : MYR 12.40-
Days to Ship : 2 Day(s)
-
MIL Connector Crimped Female ContactMISUMI
Standard Price : MYR 99.89-
Days to Ship : 1 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy