(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
New Baby Collet (Ultra-Precision Type) (Part Numbers)
[Features]
· New series of the New Baby Collet with shrinkage allowance now available in sizes 0.1 and 0.2.
· Suppresses the collet shrinkage amount to enable chucking in a more stable state.
· Series of 0.1 to 0.2 mm increments allows the selection of a collet matching the blade tool shank.
Japanese Only
Part Number
Configured Part Number is shown.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Retainable blade diameter (mm) | B (mm) | φA (mm) | Maximum Gripping Diameter (mm) | Compatible Main Body Size (mm) | Compatible Baby Chuck | Shrinkage allowance (φ) | Features | Specifications | Runout accuracy (nose) | Runout accuracy (4D edge) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 886.84 | 1 Piece(s) | 11 Day(s) | 0.4–0.5 | 13.5 | 9.3 | 0.5 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 427.11 | 1 Piece(s) | 11 Day(s) | 0.6～0.7 | 13.5 | 9.3 | 0.7 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 427.11 | 1 Piece(s) | 11 Day(s) | 0.7～0.8 | 13.5 | 9.3 | 0.8 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 427.11 | 1 Piece(s) | 11 Day(s) | 0.8～0.9 | 13.5 | 9.3 | 0.9 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 503.99 | 1 Piece(s) | 11 Day(s) | 1.0~1.1 | 13.5 | 9.3 | 1.1 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 503.99 | 1 Piece(s) | 11 Day(s) | 1.4 to 1.5 | 13.5 | 9.3 | 1.5 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 421.96 | 1 Piece(s) | 11 Day(s) | 1.9～2.0 | 13.5 | 9.3 | 2 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 497.91 | 1 Piece(s) | 11 Day(s) | 2.3～2.4 | 13.5 | 9.3 | 2.4 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 497.91 | 1 Piece(s) | 11 Day(s) | 2.4～2.5 | 13.5 | 9.3 | 2.5 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 497.91 | 1 Piece(s) | 11 Day(s) | 2.6～2.7 | 13.5 | 9.3 | 2.7 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 497.91 | 1 Piece(s) | 11 Day(s) | 2.7～2.8 | 13.5 | 9.3 | 2.8 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 497.91 | 1 Piece(s) | 11 Day(s) | 2.8～2.9 | 13.5 | 9.3 | 2.9 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 344.71 | 1 Piece(s) | 11 Day(s) | 2.9～3.0 | 13.5 | 9.3 | 3 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 3.0～3.1 | 13.5 | 9.3 | 3.1 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 3.1~3.2 | 13.5 | 9.3 | 3.2 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 3.2～3.3 | 13.5 | 9.3 | 3.3 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 3.3–3.4 | 13.5 | 9.3 | 3.4 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 3.4~3.5 | 13.5 | 9.3 | 3.5 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 3.5～3.6 | 13.5 | 9.3 | 3.6 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 3.7～3.8 | 13.5 | 9.3 | 3.8 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 3.8～3.9 | 13.5 | 9.3 | 3.9 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 4.0～4.1 | 13.5 | 9.3 | 4.1 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 4.1~4.2 | 13.5 | 9.3 | 4.2 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 4.2~4.3 | 13.5 | 9.3 | 4.3 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 4.3~4.4 | 13.5 | 9.3 | 4.4 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 4.4～4.5 | 13.5 | 9.3 | 4.5 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 4.5～4.6 | 13.5 | 9.3 | 4.6 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 4.6～4.7 | 13.5 | 9.3 | 4.7 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 4.7～4.8 | 13.5 | 9.3 | 4.8 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 4.8～4.9 | 13.5 | 9.3 | 4.9 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 344.71 | 1 Piece(s) | 11 Day(s) | 4.9~5.0 | 13.5 | 9.3 | 5 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 5.1～5.2 | 13.5 | 9.3 | 5.2 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 5.2～5.3 | 13.5 | 9.3 | 5.3 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 5.3~5.4 | 13.5 | 9.3 | 5.4 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 5.4～5.5 | 13.5 | 9.3 | 5.5 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 5.5～5.6 | 13.5 | 9.3 | 5.6 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 5.6～5.7 | 13.5 | 9.3 | 5.7 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 5.7～5.8 | 13.5 | 9.3 | 5.8 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 406.76 | 1 Piece(s) | 11 Day(s) | 5.8～5.9 | 13.5 | 9.3 | 5.9 | 6 | MEGA6N/NBS6 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 479.68 | 1 Piece(s) | 11 Day(s) | 0.6～0.7 | 17 | 12.2 | 0.7 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 479.68 | 1 Piece(s) | 11 Day(s) | 0.7～0.8 | 17 | 12.2 | 0.8 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 479.68 | 1 Piece(s) | 11 Day(s) | 0.8～0.9 | 17 | 12.2 | 0.9 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 431.91 | 1 Piece(s) | 11 Day(s) | 0.9 to 1.0 | 17 | 12.2 | 1 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 479.68 | 1 Piece(s) | 11 Day(s) | 1.0~1.1 | 17 | 12.2 | 1.1 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 479.68 | 1 Piece(s) | 11 Day(s) | 1.2～1.3 | 17 | 12.2 | 1.3 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 431.91 | 1 Piece(s) | 11 Day(s) | 1.4 to 1.5 | 17 | 12.2 | 1.5 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 479.68 | 1 Piece(s) | 11 Day(s) | 1.5–1.6 | 17 | 12.2 | 1.6 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 479.68 | 1 Piece(s) | 11 Day(s) | 1.6 to 1.7 | 17 | 12.2 | 1.7 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 479.68 | 1 Piece(s) | 11 Day(s) | 1.8～1.9 | 17 | 12.2 | 1.9 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 1.9～2.0 | 17 | 12.2 | 2 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.1～2.2 | 17 | 12.2 | 2.2 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.2～2.3 | 17 | 12.2 | 2.3 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.3～2.4 | 17 | 12.2 | 2.4 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 423.34 | 1 Piece(s) | 11 Day(s) | 2.4～2.5 | 17 | 12.2 | 2.5 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.5~2.6 | 17 | 12.2 | 2.6 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.6～2.7 | 17 | 12.2 | 2.7 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.7～2.8 | 17 | 12.2 | 2.8 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.8～2.9 | 17 | 12.2 | 2.9 | 8 | MEGA8N/NBS8 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 412.83 | 1 Piece(s) | 8 Day(s) | 2.8～3.0 | 17 | 12.2 | 3 | 8 | MEGA8N/NBS8 | 0.2 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 412.83 | 1 Piece(s) | 8 Day(s) | 3.2～3.4 | 17 | 12.2 | 3.4 | 8 | MEGA8N/NBS8 | 0.2 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 412.83 | 1 Piece(s) | 8 Day(s) | 3.4～3.6 | 17 | 12.2 | 3.6 | 8 | MEGA8N/NBS8 | 0.2 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 412.83 | 1 Piece(s) | 8 Day(s) | 3.6～3.8 | 17 | 12.2 | 3.8 | 8 | MEGA8N/NBS8 | 0.2 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 412.83 | 1 Piece(s) | 8 Day(s) | 3.8～4.0 | 17 | 12.2 | 4 | 8 | MEGA8N/NBS8 | 0.2 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 370.83 | 1 Piece(s) | 11 Day(s) | 4.0 to 4.2 | 17 | 12.2 | 4.2 | 8 | MEGA8N/NBS8 | 0.2 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 412.83 | 1 Piece(s) | 8 Day(s) | 4.2～4.4 | 17 | 12.2 | 4.4 | 8 | MEGA8N/NBS8 | 0.2 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 412.83 | 1 Piece(s) | 8 Day(s) | 4.4～4.6 | 17 | 12.2 | 4.6 | 8 | MEGA8N/NBS8 | 0.2 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 412.83 | 1 Piece(s) | 8 Day(s) | 4.6~4.8 | 17 | 12.2 | 4.8 | 8 | MEGA8N/NBS8 | 0.2 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 370.83 | 1 Piece(s) | 11 Day(s) | 4.8～5.0 | 17 | 12.2 | 5 | 8 | MEGA8N/NBS8 | 0.2 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 330.24 | 1 Piece(s) | 11 Day(s) | 5.5 to 6.0 | 18 | 12.5 | 6 | 8 | MEGA8N/NBS8 | 0.5 | New series of the New Baby Collet with shrinkage allowance now available in sizes 0.1 and 0.2. It suppresses the collet shrinkage amount to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows the selection of a collet that matches the blade tool shank. | For mega new baby chuck / new baby chuck | Within 1 μm | Within 3 µm | ||
MYR 479.68 | 1 Piece(s) | 11 Day(s) | 1.7 to 1.8 | 26 | 16.2 | 1.8 | 10 | MEGA10N/NBS10 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 479.68 | 1 Piece(s) | 11 Day(s) | 1.8～1.9 | 26 | 16.2 | 1.9 | 10 | MEGA10N/NBS10 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 1.9～2.0 | 26 | 16.2 | 2 | 10 | MEGA10N/NBS10 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.0～2.1 | 26 | 16.2 | 2.1 | 10 | MEGA10N/NBS10 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.1～2.2 | 26 | 16.2 | 2.2 | 10 | MEGA10N/NBS10 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.2～2.3 | 26 | 16.2 | 2.3 | 10 | MEGA10N/NBS10 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.3～2.4 | 26 | 16.2 | 2.4 | 10 | MEGA10N/NBS10 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.4～2.5 | 26 | 16.2 | 2.5 | 10 | MEGA10N/NBS10 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.6～2.7 | 26 | 16.2 | 2.7 | 10 | MEGA10N/NBS10 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.7～2.8 | 26 | 16.2 | 2.8 | 10 | MEGA10N/NBS10 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm | ||
MYR 473.60 | 1 Piece(s) | 11 Day(s) | 2.8～2.9 | 26 | 16.2 | 2.9 | 10 | MEGA10N/NBS10 | 0.1 | Arrival of new series with shrinkage allowance for New Baby Collet of 0.1 and 0.2/. It suppresses the collet shrinkage volume, to enable chucking in a more stable state. In addition, conversion to a series of 0.1 to 0.2 mm increments allows selection of a collet matching the blade tool shank. | For Mega New Baby Chuck / New Baby Chuck | Within 1 μm | Within 3 µm |
Loading...
Basic Information
| Product Category | Attachments/Accessories | Class | AA |
|---|
Specification/Dimensions
-
Retainable blade diameter(mm)
- 0.4–0.5
- 0.6～0.7
- 0.7～0.8
- 0.8～0.9
- 0.9 to 1.0
- 1.0~1.1
- 1.2～1.3
- 1.4 to 1.5
- 1.5–1.6
- 1.6 to 1.7
- 1.7 to 1.8
- 1.8～1.9
- 1.9～2.0
- 2.0～2.1
- 2.1～2.2
- 2.2～2.3
- 2.3～2.4
- 2.4～2.5
- 2.5~2.6
- 2.6～2.7
- 2.7～2.8
- 2.8～2.9
- 2.8～3.0
- 2.9～3.0
- 3.0～3.1
- 3.1~3.2
- 3.2～3.3
- 3.2～3.4
- 3.3–3.4
- 3.4~3.5
- 3.4～3.6
- 3.5～3.6
- 3.6～3.8
- 3.7～3.8
- 3.8～3.9
- 3.8～4.0
- 4.0～4.1
- 4.0 to 4.2
- 4.1~4.2
- 4.2~4.3
- 4.2～4.4
- 4.3~4.4
- 4.4～4.5
- 4.4～4.6
- 4.5～4.6
- 4.6～4.7
- 4.6~4.8
- 4.7～4.8
- 4.8～4.9
- 4.8～5.0
- 4.9~5.0
- 5.1～5.2
- 5.2～5.3
- 5.3~5.4
- 5.4～5.5
- 5.5～5.6
- 5.5 to 6.0
- 5.6～5.7
- 5.7～5.8
- 5.8～5.9
-
B(mm)
-
φA(mm)
-
Maximum Gripping Diameter(mm)
- 0.5
- 0.7
- 0.8
- 0.9
- 1
- 1.1
- 1.3
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 3.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
- 5
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
- 6
-
Compatible Main Body Size(mm)
-
Compatible Baby Chuck
- MEGA6N/NBS6
- MEGA8N/NBS8
- MEGA10N/NBS10
-
Shrinkage allowance(φ)
- 0.1
- 0.2
- 0.5
-
type
- NBC-AA
Days to Ship
-
- All
- 8 Day(s) or Less
- 11 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Oil Hole Collet
- MC Straight Collet
- FONBC Coolant Collet
- Micro Collet (for Mega Micro Chuck)
- Mega E Collet
- Drill Mill Collet
- New Baby E Collet For End Mill Only (For Mega New Baby Chuck / New Baby Chuck)
- Deburring Tool Holder Barriquan®
Customers Who Viewed This Item Also Viewed
-
-
New Baby E Collet For End Mill Only (For Mega New Baby Chuck / New Baby Chuck)BIG DAISHOWA SEIKI
Standard Price : MYR 336.08-
Days to Ship : 8 Day(s) or more
-
-
Baby Chuck Collet with NutBIG DAISHOWA SEIKI
Standard Price : MYR 326.03-
Days to Ship : 9 Day(s) or more
-
New Baby Nut (for New Baby Chucks)BIG DAISHOWA SEIKI
Standard Price : MYR 407.84-
Days to Ship : 11 Day(s)
-
Mega Micro Chuck (High Rigidity Type)BIG DAISHOWA SEIKI
Standard Price : MYR 1,738.38-
Days to Ship : 11 Day(s)
-
Tap collet (for New Baby Chuck)BIG DAISHOWA SEIKI
Standard Price : MYR 832.42-
Days to Ship : 8 Day(s) or more
-
-
-
High Helix Square End Mill Regular 3-Flute 3636GUHRING
Standard Price : MYR 168.66-
Days to Ship : 5 Day(s) or more
-
All Purpose Square End Mill Stub 3-Flute 3684GUHRING
Standard Price : MYR 101.55-
Days to Ship : 5 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy