COCO SHINON Conductive Rubber, Sponge Related

• 

  Antistatic Rubber Mat Sinonstat

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · Sinonstat is a semi-hard mat made from a special mix of conductive materials. It consists of two layers: an anti-static color layer and a black conductive layer.
  · Highly heat-resistant. Melted solder will not eat through it, ensuring security during soldering work.
  · Sinonstat mats will not flake off powder or peel off, so you can use them with confidence in clean rooms.
  · [Product Warning] The product features hard surfaces and easily curls on all four sides. When using, lay it out for at least 24 hours, then fix in place with double-sided tape.
  · Sinonstat's performance

  Standard Price:	MYR 72.48-
  Days to Ship:	5 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Table use L-type SGL rack

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · The SGL rack is a basic L-shaped circuit board holder.
  · The grooves are relatively deep at 5 mm, keeping boards safely in place for storage.
  · The heat-resistant type uses carbon fiber, which provides durability and eliminates powder dropping, so you can use it with confidence in clean rooms.
  · Surface resistance maintained at 104 to 108 Ω/

  CAD ：

  2D

  Standard Price:	MYR 105.35-
  Days to Ship:	8 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  PCB Rack Sheet【10 Pieces Per Package】

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · This PCB rack sheet is a guide developed for print circuit board storage racks.
  · Everything is conductive and the surfaces maintain resistances of 104 to 108 Ω/□.
  · May be mounted as necessary for your application.
  · Three types of guide sheets are available. L type: Conductive PS; PP type: Conductive PP; MG type: Conductive heat-resistant resin

  CAD ：

  2D

  Standard Price:	MYR 160.53-
  Days to Ship:	4 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Racks and Racktainers for Distribution Use

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · A grooved print circuit board storage unit featuring an integrated rack and plastic container for transport.
  · An adjustable cassette-insertion system eliminates annoying width adjustments.
  · Guide plates and containers are made of conductive plastic for light weight and excellent durability.
  · Can be stacked up for convenience and space saving.
  · Use the dedicated locking lid (sold separately) with the container type to keep the inside airtight, helping prevent dust, etc. during transport.
  · Widths can be adjusted at a 4 mm pitch, and the grooves are 5 mm deep

  CAD ：

  2D

  Standard Price:	MYR 1,081.27-
  Days to Ship:	10 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Anti-Static Transparency Diagram Case【10 Pieces Per Package】

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · The drawing case was developed to create an environment that doesn't cause static electricity interference in clean rooms and work areas, keeping electronic parts safe if they make contact with it.
  · The card-case type is sealed on three surfaces for hard durability.
  · The clear-file type is sealed on two surfaces

  Standard Price:	MYR 124.09-
  Days to Ship:	4 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  PKG Holder

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · The PKG holder is a basic rack for holding and storing print circuit boards.
  · Features grooves of differing widths on the front and rear surfaces, letting you place any type of print circuit board inside.
  · Uses fully conductive materials for assembling mounted boards, examination, storage, etc. (Surface resistance: 104 to 108 Ω/□)
  · Uses conductive PP materials for superior chemical resistance.
  · Useful for temporary print circuit board storage during assembly or examination.

  CAD ：

  2D

  Standard Price:	MYR 160.53
  Days to Ship:	4 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Magazine Rack / Magazine Rack Storage PDBOX for Insertion Machines

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · A standard magazine rack for insertion machines.
  · Supports surface chip mounting.
  · Used in a wide variety of areas, from automatic insertion to circuit board storage and transport.
  · ED-2504M7is a new kind of magazine rack with an adjustable width that can be adjusted with just one touch.
  · heat-resistant type (supports circuit board temperatures up to 130°C) is our standard product.
  · ED-9500NHIs a large magazine rack with sufficient heat resistance (supports circuit board temperatures up to 140°C) to be used for face installation (chip mounting).
  · width adjuster lets you loosen two screws on the top to freely and easily change widths
  · Surface resistance is semi-permanently maintained at 104 to 108 Ω/□ for all types.

  CAD ：

  2D

  Standard Price:	MYR 461.56-
  Days to Ship:	8 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Rack for Highly Heat-resistant Processes, Guide Plate【10 Pieces Per Package】

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.

  CAD ：

  2D

  Standard Price:	MYR 199.27-
  Days to Ship:	12 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Rack for Highly Heat-resistant Processes

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.

  CAD ：

  2D

  Standard Price:	MYR 165.16-
  Days to Ship:	8 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Conductive Parts Case

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · Useful for storing semiconductors and other electronic parts, substrates, IC cards, LCD panels, etc.
  · Everything is conductive and the surfaces maintain resistances of 104 to 107 Ω/□

  CAD ：

  2D

  Standard Price:	MYR 18.42-
  Days to Ship:	12 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Cargo Rack and Rack Runner (Specialized Cover)

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · A grooved print circuit board storage unit featuring an integrated rack and plastic container for transport.
  · An adjustable cassette-insertion system eliminates annoying width adjustments.
  · Guide plates and containers are made of conductive plastic for light weight and excellent durability.
  · Can be stacked up for convenience and space saving.
  · Use the dedicated locking lid (sold separately) with the container type to keep the inside airtight, helping prevent dust, etc. during transport.
  · Widths can be adjusted at a 4 mm pitch, and the grooves are 5 mm deep, letting you store most kinds of circuit boards.
  · The N type features long (155 mm) grooves for improved storability

  Standard Price:	MYR 224.75
  Days to Ship:	10 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Cargo Rack and Rack Runner (with Divider)

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · A grooved print circuit board storage unit featuring an integrated rack and plastic container for transport.
  · An adjustable cassette-insertion system eliminates annoying width adjustments.
  · Guide plates and containers are made of conductive plastic for light weight and excellent durability.
  · Can be stacked up for convenience and space saving.
  · Use the dedicated locking lid (sold separately) with the container type to keep the inside airtight, helping prevent dust, etc. during transport.
  · Widths can be adjusted at a 4 mm pitch, and the grooves are 5 mm deep, letting you store most kinds of circuit boards.
  · The N type features long (155 mm) grooves for improved storability

  Standard Price:	MYR 264.87-
  Days to Ship:	16 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Desktop L type rack EL rack

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · The EL rack is a basic L-type circuit board holder suited for relatively large boards.
  · Shallow (3 mm) grooves ensure board components won't butt against the rack, even if there is little empty space on the edges.
  · Sturdy construction supports loads up to 30 kg.
  · Uses conductive PP materials for superior chemical resistance.
  · Surface resistance maintained at 104 to 108Ω/□.

  CAD ：

  2D

  Standard Price:	MYR 160.53
  Days to Ship:	8 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

Loading...